The EMCO oxi-sat 1010 Plus Table TOP Pulse Oximeter is an upgraded version of the most popular EMCO Oxi-Sat 1010 using latest patented PureSAT® from Nonin incorporate, USA. The Pulse Oximeter incorporates large bright LEDs for excellent visibility with advanced motion artefacts rejection technology enabling reliable and accurate reading of SpO2 and pulse rate. Features :   User selectable High/Low Alarm limits for SpO2 & Pulse Rate. An alarm sounds it any of the limits are violated. Three Colour Perfusion LED displays the perfusion status - Green (good perfusion), Orange/Yellow (marginal perfusion) & Red (inadequate perfusion), This method gives the user a pulse - by - pulse visual indication of waveform signal quality without requiring the user to perform complex waveform analysis during critical patient care situations. A Pulse Beep is sounded for every detected pulse with tone varying to SpO2 value. Additional Sensor Alarm indicates that the sensor has been disconnected either from Patient or from Oximeter. Rechargeable Battery (Sealed Lead Acid), with a battery life of more than 20 hours. Charging time is only hours. An Eight Segment LED Bargraph indicates pulse strength. Low Battery indication on 10th segment of Bargraph. User can switch On / Off Pulse Beep & Sensor Alarm. Wide range of SENSORS available with most of the sensors having 3 meter cable lengths (10 fts). Ideally suitale for Operation Theatres, ICU, NICU, OPD, Emergency Rooms or during Emergency Transport.

Product Info EMCO CapnoWave 3400 is a standalone table top capnograph, which incorporates plug & play CO2 technology from Respironics Inc., USA Flexibility to choose Mainstream or Sidestream Capnography Mainstream sensor (CAPNOSTAT 5) offered by us is a small, lightweight mainstream CO2 sensor that helps in providing accurate as well as reliable monitoring for all incubated patients from neonates to adults. Designed to deliver maximum durability, the sensors are tough enough to withstand everyday life in ICU or EMS environment. Further, the easy-to-use on-airway adapters are precision designed to optimize system performance by reducing effects of moisture, thus resulting in hassle free and uninterrupted monitoring. Sidestream Sensor (LoFlo) is the newest 50ml sampling rate sensor that provides consistent and reliable CO2 monitoring of adult, pediatric and neonatal patients. Capnography Features : Useful in long-term ventilator management Allows verification of proper ET tube placement, Allow confirmation of ET tube stability during transport side stream sensor (LoFlo) LloFlo’s broad range of sampling accessories helps in incorporating advanced filtering system & external sample cell that provides up to 120 hours of protection against occlusions which are caused by moisture/secretions Other than this, LoFlo Sidestream is also useful in monitoring : Effects of pain-controlled analgesia Monitoring respiratory efforts during procedural sedation Safety monitoring post-extubation Screening tool in the ED for respiratory complications such as asthma

Product Info We are offering Doppler DHR120 With FHR Display having following features : LCD display with beck light, can be used in any illumination conditions. Accurate and reliable FHR detection with clear sound High sensitivity probe with 2.0 MHz in continuous wave. Ergonomic design, portable and convenient. Built-in speaker. Automatically power off. Multi displaying of FHR : Number battery status indicator, voice intensity indicator. Building-in rechargeable battery and AC charger.

Product Info Emco 4950 Multi-parameter Monitors   offered by us are made available in standard configuration comprising of ECG, Sp02, NIBP, Respiration and Temperature. These are also upgradeable to Dual IBP and etC02, Thermal Recorder as well as 10.2" Colour TFT - with maximum 9 Waveforms Display option. The other features include : Display of 7-lead ECG Waveforms in one screen Arrhythmia and ST Segment Analysis 120 seconds full-disclosure waveforms review OxyCRG screen for Neonatal monitoring 96 hour graphic and tabular trends of all parameters Recall of 500 NIBP measurements and 60 alarm events Large Font display Drug dose Calculation Suitable for Adult, Paediatric and Neonate Central Monitoring/Network capability through LAN Ethernet Technical Specifications : Anti-electroshock type: Class l equipment and internal Powered equipment EMC type: Class A Amti-electroshock degree : ECG (RESP), TEMP, IBP - Type; CF SpO2, NIBP, CO2 - Type BF Ingress Protection: IPX1 Safety: Meets the requirements of IEC60601 standards

Bright LCD Display 240 X 128 dot 3 Channel ECG Waveform Display 12-Lead ECG simultaneous acquisition Digital isolation technology minimized signal interference Printing Continuous One channel trace, alongwith annotations for lead mark, sensitivity, paper speed, filter Printing of Rhythm Lead for observing abnormal heart rate Built-in rechargeable battery, AC/DC supply Power off automatically when not in use High resolution and precision thermal array printer Internal memory supporting ECG data and wave forms store and recall Filters to avoid baseline drift

Product Info The EMCO Infusor 950 Syringe Infusion Pump (CE Marked) offered by us comes with Syringe Size Detector and with high flow rate that should be as per 950. These EMCO Infusors are designed for accurate continuous infusion of medications at expanded infusion rate ranges. The features include:   Intuitive & user friendly operations Simple entry of parameters via numeric keypad Expanded maximum infusion rate unto 1500 ml/h Automatic and manual bolus modes Set-up menu enables customization of the pump Anti-bolus & anti-siphon functions increase patient safety Titration allows change of infusion parameters without interruption of infusion Accepts syringe from 5ml to 50/60ml of all majors Indian Brands like DISPOVAN,   ROMSONS as well as all imported brands The drug library contains 15 drug names & can be updated by the physician Syringe pump can be quickly started within 3 steps by selecting syringe & infusion rate Automatic syringe volume detection

An Infusion/Blood Warmer that does not require additional disposable It takes care of Hypothermia, which may result in serious side-effects and has always been major concern. Infusion/Transfusion at body temperature helps in preventing as well as treating hypothermia as well as also assists in ensuring effective intravenous administration. ANIMEC AM2S can help protect surgical patients against hypothermia thereby reducing their recovery time. Benefits of ANIMEC AM 2S are : Automatic regulation of fluid temperature Less heat loss after warming No disposable warming bags or coils are required Quick setup - the IV tube is inserted directly into the warmer Rapid warmup - ready to use in 4 min Safe performance is guaranteed utilizing silicon coated heating plates and multiple sensors for accurate temperature control Applications : Patients undergoing lengthy procedures in coll operating room environments Patients with reduced oxygen availability (eg. heart failure, lung disease) Patients with cardiac instability (eg. arrhythmia) Patients with impaired thermal regulation (eg. organic brain disease, neonates) Patients at risk of venospasm associated with infusion

Product Info We are offering Doppler DHR120 With FHR Display having following features : LCD display with beck light, can be used in any illumination conditions. Accurate and reliable FHR detection with clear sound High sensitivity probe with 2.0 MHz in continuous wave. Ergonomic design, portable and convenient. Built-in speaker. Automatically power off. Multi displaying of FHR : Number battery status indicator, voice intensity indicator. Building-in rechargeable battery and AC charger.

Product Info Emco 4950 Multi-parameter Monitors   offered by us are made available in standard configuration comprising of ECG, Sp02, NIBP, Respiration and Temperature. These are also upgradeable to Dual IBP and etC02, Thermal Recorder as well as 10.2" Colour TFT - with maximum 9 Waveforms Display option. The other features include : Display of 7-lead ECG Waveforms in one screen Arrhythmia and ST Segment Analysis 120 seconds full-disclosure waveforms review OxyCRG screen for Neonatal monitoring 96 hour graphic and tabular trends of all parameters Recall of 500 NIBP measurements and 60 alarm events Large Font display Drug dose Calculation Suitable for Adult, Paediatric and Neonate Central Monitoring/Network capability through LAN Ethernet Technical Specifications : Anti-electroshock type: Class l equipment and internal Powered equipment EMC type: Class A Amti-electroshock degree : ECG (RESP), TEMP, IBP - Type; CF SpO2, NIBP, CO2 - Type BF Ingress Protection: IPX1 Safety: Meets the requirements of IEC60601 standards

Product Info EMCO CapnoWave 3400 is a standalone table top capnograph, which incorporates plug & play CO2 technology from Respironics Inc., USA Flexibility to choose Mainstream or Sidestream Capnography Mainstream sensor (CAPNOSTAT 5) offered by us is a small, lightweight mainstream CO2 sensor that helps in providing accurate as well as reliable monitoring for all incubated patients from neonates to adults. Designed to deliver maximum durability, the sensors are tough enough to withstand everyday life in ICU or EMS environment. Further, the easy-to-use on-airway adapters are precision designed to optimize system performance by reducing effects of moisture, thus resulting in hassle free and uninterrupted monitoring. Sidestream Sensor (LoFlo) is the newest 50ml sampling rate sensor that provides consistent and reliable CO2 monitoring of adult, pediatric and neonatal patients. Capnography Features : Useful in long-term ventilator management Allows verification of proper ET tube placement, Allow confirmation of ET tube stability during transport side stream sensor (LoFlo) LloFlo’s broad range of sampling accessories helps in incorporating advanced filtering system & external sample cell that provides up to 120 hours of protection against occlusions which are caused by moisture/secretions Other than this, LoFlo Sidestream is also useful in monitoring : Effects of pain-controlled analgesia Monitoring respiratory efforts during procedural sedation Safety monitoring post-extubation Screening tool in the ED for respiratory complications such as asthma

Bright LCD Display 240 X 128 dot 3 Channel ECG Waveform Display 12-Lead ECG simultaneous acquisition Digital isolation technology minimized signal interference Printing Continuous One channel trace, alongwith annotations for lead mark, sensitivity, paper speed, filter Printing of Rhythm Lead for observing abnormal heart rate Built-in rechargeable battery, AC/DC supply Power off automatically when not in use High resolution and precision thermal array printer Internal memory supporting ECG data and wave forms store and recall Filters to avoid baseline drift

Product Info The EMCO Infusor 950 Syringe Infusion Pump (CE Marked) offered by us comes with Syringe Size Detector and with high flow rate that should be as per 950. These EMCO Infusors are designed for accurate continuous infusion of medications at expanded infusion rate ranges. The features include:   Intuitive & user friendly operations Simple entry of parameters via numeric keypad Expanded maximum infusion rate unto 1500 ml/h Automatic and manual bolus modes Set-up menu enables customization of the pump Anti-bolus & anti-siphon functions increase patient safety Titration allows change of infusion parameters without interruption of infusion Accepts syringe from 5ml to 50/60ml of all majors Indian Brands like DISPOVAN,   ROMSONS as well as all imported brands The drug library contains 15 drug names & can be updated by the physician Syringe pump can be quickly started within 3 steps by selecting syringe & infusion rate Automatic syringe volume detection