Our Products #3342339

Alloy material has very important role in our daily life even there won't be a day passed without using alloy. Our utensils in the kitchen, vehicles, computers, mobile phones, chairs etc. are using different type of alloys which means numerous alloys have been made and being used by human beings. Most of the engineering and medical equipments, machineries, tools are made by Alloys.

Bombay Test House (BTH), is a well equipped, State of the Art Commercial and Public Testing Laboratory, with highly sophisticated Instruments such as LC MS, GC MS, ICP OES, FTIR and other latest equipments and having Accreditations, Recognitions and Approvals from various National and International bodies, is entirely independent and is not associated with any Corporations, Industries, Importers and Exporters or any of the Govt. bodies.Agro products are the life force, the very source of survival for the human kind. It is not only that man breathes with the support of food but a major chunk of the world population is also dependent on agriculture as their source of survival. An approximate 36% of the world's workers are engaged in agriculture with India's 65% of the population being directly and indirectly employed in this sector.

Accurate water analysis is a responsibility to the countrys infrastructure. According to estimates, approximately 71% of the earths surface is covered with water. The total amount of water on the earth is about 1.36 billion cubic kilo metres (326 million cubic miles). However, only 2.5% of the earths water is fresh water, of this 98.8% is in the form of ice and ground water, leaving a very low volume for the consumer. Thus, water is the most precious resource.

We are offering a wide range of fresh vegetables. Food Analysis is the discipline dealing with the development, application and study of analytical procedures for characterizing the properties of foods and their constituents.

COAL is the general term for the rocks formed from the fossilled remains of fresh water plants in dense swamps or logs. When the plants died, they fell into the water where they were soon engulfed in the black, oxygen-deficient mud. Here they were protected from further decay & did not rot away.

Soaps and Detergent testing includes Soaps, Synthetic Detergents and Wetting and emulsifying agents. The testing parameters Total Fatty Matter, Acid Value, Free Alkali, Matter Insoluble in Water, Matter insoluble in Alcohol, Chlorides, Saponification Value, unsaponifiable matter, Glycerin Content, Titer, Moisture, Iodine Value, Colour, Fatty acids and Ester etc.

Soaps and Detergent testing includes Soaps, Synthetic Detergents and Wetting and emulsifying agents. The testing parameters Total Fatty Matter, Acid Value, Free Alkali, Matter Insoluble in Water, Matter insoluble in Alcohol, Chlorides, Saponification Value, unsaponifiable matter, Glycerin Content, Titer, Moisture, Iodine Value, Colour, Fatty acids and Ester etc.

Every segment of society uses minerals and mineral resources every day. The roads we ride or drive on and the buildings we live learn and work in all contain minerals. Below is a selected list of commonly used metallic and nonmetallic minerals, ore minerals, mineral by products, aggregates and rock types that are used to make products we use in our daily life.

Bombay Test House Pvt Ltd., has been recognized by BIS (Bureau of Indian Standards) the apex standard body under the Ministry of Consumer Affairs, Government of India, for Assaying and Hallmarking and is equipped with the State of the Art Gold and Silver Assaying Laboratory using XRF for preliminary and classic fire assay technique for Gold and Silver Testing.

Oil analysis can uncover, isolate, and offer solutions for abnormal lubricant and machine conditions when used as a predictive maintenance tool. These abnormalities can result in expensive, sometimes catastrophic damage causing lost production, extensive repair costs, and even operator accidents.

A plastic material is any of a wide range of synthetic or semi-synthetic organic solids that are moldable. Plastics are typically organic polymers of high molecular mass, but they often contain other substances. They are usually synthetic, most commonly derived from petrochemicals, but many are partially natural.

Our testing range under this segment includes, paints and enamels, vehicles, solvents, thinners, pigments and extenders, polishes, painters material like gums, driers, paint removers, drying oils, powder coating and resin coating etc., the testing of ink includes printing inks, writing inks and duplicating inks.etc.

The textile and textiles auxiliaries includes products like fibre & filaments, yarns & chords, fabrics, garments and made-ups and auxiliaries and technical textiles ( geo textiles, medical textiles, automotive textiles) . The testing parameters includes, count, construction, wtsq. Mtr (gsm), fabric width, ph value, composition, moisture content, colour fastness to rubbingcrocking, dimensional stability to washing etc tested as per iso, astm-d, aatcc, din, jin as and bs standards.

The products covered are Cement and Other mortars, Cement , Concrete, Refractory, Refractory Cement, Sand, Clays and Soils, Pozzolonic Material, Fly-Ash, Limestone, Lime Gypsum, Waterproofing Compounds, Thermal Insulation material, Masonry Bricks and Blocks , Ceramics Products etc., and Physical and Chemical test as per Indian and International Standards.

Gold and gold jewellery and silver and silver artifacts satisfying bis guidelines for manufacture of gold and silver articles as per is 1417:2009 and is 2113: 2004 are segregated into lot based on information provided by the customers. Few of the selected pieces are scrappedmelted from the appropriate locations based on design manufacturing criteria. The scrapped gold is accurately weighed on precision balance (0.001mg accuracy )and then undergo fire assay as per indian standard is 1418:1999 for gold and is 2113: 2004 for silver. Once the fineness of the sample is found as per requirement, the representative jewellery lot undergo hallmarking. The hallmarking of gold and silver articles are carried out by cnc laser marking machine-a non-impact method and does not cause sinking or bruising damages.

Microbiology is the study of microorganisms, which are unicellular and cluster forming entities not visible to the naked eye as individual organisms. The study of microorganisms has become important, especially in foods, due to their ability to cause food spoilage and bring about pathogenic reactions in humans and animals. Controlling the microbial activities contribute to high hygienic standards in food preventing the spread of food borne illnesses especially those spread through food and water.