• Hex lock nuts are the most common type of lock nut. They have six uniform sides that create a flat bearing surface.

• DIN 436 Square Washers feature a large outside diameter to distribute the load on sheet metal surfaces.


• The zinc plated finish helps to resists corrosion in demanding application.


• For Wood Construction and screws.


• Available as per custom specification.

• Brass Sleeve Anchors allow them to anchor into concrete, brick and block.


• Each part is plated or coated and assembled into a complete ready to use anchor.


• The anchor consists of a threaded stud with an outwardly flared cone shaped end.


• A tubular expander sleeve is assembled over the stud and butted against the small diameter of the cone.


• A washer and hex nut are then assembled on the stud to complete the anchor.


• Brass Sleeve Anchor works on a true expansion principle: Tightening of the nut pulls the cone-shaped stud end into the expander sleeve, wedging it outward and locking the anchor into the base material.


• Widely used for medium duty application into concrete, brick and block.

Material:

• Insulator: Polypropylene, 360 Brass, Copper


• Movable Bar/ Fixed Bar: Nickel Plating Copper


• Basement: Reinforced polypropylene


• Bolt and Nut: Nickel Plating Brass, Trivalent Chromate Plating steel

Mounting:

• DIN rail-mountable

Ground:

• Rated surge voltage: 8 kV


• Surge voltage category: III


• Connection in acc. with standard: IEC 60947-7-2

Connections:

• Connections: Spring cage


• Wire: 2810 AWG


• Stripping length: 3/8 in. (0.95 cm)


• Internal cylindrical gage: A4

• High-grade, strain-crack and corrosion proof copper alloys and 360 Brass alloy to prevent electrolytic corrosion and rusting.


• Screw locking maintenance-free design ensures proper operation and prevents screws from backing out, so tightening of the terminal screws is not necessary.


• As the Earth Terminal will be fastened on to cabinet enclosure by using screw.


• The work at the time of expansion and the renovation on site will become easy.


• In case that welding inside the cabinet enclosure with surface treated steel plate might be difficult, this earth terminal will be convenient and useful.

• Use to measure the earth resistance of electrical instruments and electrical circuits.


• Use for the wiring to grounding circuits at Cubicles, Earth terminal boards.


• For use in all industries with potentially explosive atmospheres.


• Reliable protection against transient overvoltage and electromagnetic fields.


• For temperature-related fluctuations in pressure on the cable.

• Material: High quality Copper, Aluminum, Free Cutting Brass, CDA 360 Grade Brass or any standard Brass.


• Surface Plating: Dull Tin Plating, Zinc Finish, Bright Zinc Finnish, Tin Finish, etc.


• Conformal Standards: IEC 61219, ASTM B687 99, DIN Standards.

• Easily adapted to conductor sizes up to 50 mm2 by using one of the three cable sockets.


• Designed & Manufactured under strict and approved quality control procedures.


• Red for Non-corrosive dry atmosphere and Blue for corrosive humid conditions.


• All Earth Clamps have anodized Aluminium Labels indicating terminal size.


• Meet the demands of required earth termination systems.


• Ensure a low resistance and corrosion resistance connection between Termination and down conductors.


• High Mechanical Strength, Excellent Corrosion Resistance and conductivity.

• Grounding clamps are used to connect the grounding electrode conductor to the ground rod.


• Mechanical Earth Clamps have set screws to tighten the clamp around the ground rod to form a connection.


• Provides a stable earth for circumferential welding of pipes and fittings and eliminates weld pinholes caused by poor earthing.

• Solid Copper Earth Rods feature an internal tapped hole at each end which allows them to be joined together with the use of a coupling dowel.


• When deep driving a solid copper earth rod the usual practice is to insert the rod into a bore hole and backfill with either Low-Resistance Earthing Compound or Bentonite.


• Available with different threaded version.


• Threads are formed by roll threading process to ensure extra strength and avoid the risk of chipping while driving the rods in the ground.

• For earthing Installation.


• Solid copper earth rods are installed where extremely high corrosion resistance and exceptionally long service are required.


• Commonly used where soil conditions are more aggressive, i.e. areas with high levels of salt content.

• Threads are rolled by roll threading process, which ensures treat a wen copper covers are maintained, wen at the root of the thread.


• Roll thread gives greater strength than cut thread.


• Thread rolling process raises the surface of the rod.


• Rods have a high carbon steel core and tip that provide superior strength when driving.


• Molecular bond to nickel-sealed high strength steel core.


• Perfectly bonded rod will lose longer, drive easier and will not crack.


• Corrosion resistance while providing tee lowest resistance to ground.

• Used in various sectors including Lightning Protection System, Power generators, Solar system, Sugar and paper Industry, Transmission and power generators, Telecommunication Industry, Manufacturing Facilities and Refineries & Equipment Body Earthing.


• Suitable for different humidity, temperature and PH value of the soil conditions.


• Ideal for deep driving whilst also provides lasting resistance to corrosion.


• Ideally used in applications where soil conditions are very aggressive.

Surface Plating:

• The coating thickness for copper-coated rods shall not be less than 0.010 inch thick at any point on the rod when measured with an eddy-current device per ASTM E-376.


• 99.9% pure electrolytic copper coating.


• Minimum copper coating of 10 mils on rods.

• Strong, Lightweight and Compact.


• Available in a variety of thread combinations and connections.


• Low to medium pressure lines.


• Yellow brass plating. Bagged.


• Material strong enough to minimize potential cross threading.

Application:

• Common Applications include Horticultural, Agricultural, Irrigation, Marine & Plumbing.


• Suitable for use above or below ground in varying operating pressures and temperatures.

• Excellent strength & ductility.


• Corrosion resistance.


• Good bearing properties.


• Low magnetic permeability.


• Black anodized for superior performance.


• Available in a variety of thread combinations and connections.

• Suitable for Structure Pipe, Gas Pipe, Hydraulic Pipe and Chemical Fertilizer Pipe.


• Provide female pipe x male pipe thread connections with a hex for use with a wrench.


• For securing the adapters to motor shafts.

• For corrosion resistance, ductility at high temperatures, and low magnetic permeability.


• Manufactured to industry standards for lead-free pipe fittings.


• Tapered pipe threads are manufactured to exacting quality and standards.

Application:

• Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines.


• Used for connecting and extending pipes or fittings.


• Used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries.


• Used in water, refrigeration, instrumentation, hydraulic systems, grease, fuels, LP and natural gas.

• Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines.


• Used for connecting and extending pipes or fittings.


• Used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries.


• Used in water, refrigeration, instrumentation, hydraulic systems, grease, fuels, LP and natural gas.

• Special fitting configurations and/or sizes available.


• Unique design provides a superior noise reduction.


• Capable of a wide range of flow settings.


• Provide a compact male/female pipe to male/female pipe thread connection.

• Protect valves, air tools and air components from dirt and other foreign matter.


• Low profile has many applications for vacuum relief or pressure equalization on gear boxes, oil tanks or reservoirs.


• Also for single acting cylinder ports.


• Provides dual job of metering exhaust air to control cylinder or tool speed.

• Any Size Available as per Custom Specification and Requirements.

• Provides more strength than the plastic style fittings.


• Strong, durable, rustproof, highly resistant to temperature change.


• Permits maximum flow with minimum pressure drop.


• Flare, hose barb and pipe end configurations.


• Low pressure brass hose fittings, couplings and adapters in common configurations, sizes and styles.


• Ensures a perfect seal every time.

• Used anywhere water hoses are connected and disconnected frequently.


• Designed for use with residential and commercial-grade hose.


• Provides strength, durability and longer-lasting performance.

• Any Size available as per custom specification and requirements.

• High Strength, Corrosion Resistance and Electrical Conductivity.


• Resistant to high temperature.


• ROHS Compliant.


• Offer greater stability for installation.


• Available in male/male, male/female and female/female orientations.

• Used to space circuit boards, panels, doors or gears.


• Used for wrench tightening.


• Used to secure cables and ports.


• In electronics, frequently used to raise a printed-circuit board above a surface.


• For fastening applications in the electrical engineering and electronics sector.

• Serve to isolate the ends of the winding from the tank and to attach them to various elements of the electrical installation.


• Distinguished by a wide variety of shapes, designs and sizes, depending on the voltage, power, installation location and customer specification.


• The internal installation has a smooth or finely-brushed surface.


• Safety requirements in accordance with GOST 12.2.007.2-75. Protection class 1 according to GOST 12.2.007.0-75.


• Fire safety GOST 12.1.004-91.


• Detachable plug-in fittings made of dezincification-resistant brass for improved performance.


• Degree of protection IP00.


• Ambient air temperature from -40 C to +40 .

• Prevent oil leakage between the stud and insulator.


• Brass studs are designed for electrical connection between the transformer windings and a suitable input pin line, the transformer pin.


• Brass Transformer Insulators are designed for isolation of the transformer tank from current-carrying studs.


• Insulating Heads with O-Vi coating are designed for fixing the sealant over insulated head.


• The contact clamps are designed to provide reliable contact of the trunking of the transformer substation on the LV side with current-carrying parts of the power transformer terminals on the LV side, and also to reduce the effect of the transient processes in the electric network. It should be taken into account that bolt contacts require periodic monitoring and tightening of bolts.


• Used in transformers for electrical engineering and energy distribution, i.e. in power plants and substations, in local distribution networks, in wind power generation, in industrial plants and in the power supply units of electronic devices.

• Any Size Available as per Custom Specification and Requirements.

• Ensuring sufficient rigidity of the structure.


• Reduction to a minimum of the number of work piece settings during its processing.


• The availability of elements of the work piece, ensuring its secure attachment in the device.


• The absence or minimization of the number of blind holes and holes located at right angles to the main coordinate axes of the parts.


• The maximum possible unification of the shape and size of the machined elements to ensure the minimum number of processing tools and the use of standard subroutines.


• Allowance for machining is minimal, but sufficient to obtain the specified parameters of accuracy and roughness.

• Used for external machining of shafts and other components.


• For used in CNC Machining Process, Turning Process and Lathe Process.


• Simplifies the assembly process and improves the performance of machines, units and assemblies.


• For manufacturing medical device, geometry devices and more.

• Any Size Available as per Custom Specification and Requirements.

• Powder coated bases can be supplied to reduce the risk of corrosion.


• Pre-drilled fixing holes for ease of installation (these can be threaded if required).


• We use the highest quality raw materials.


• The manufacturing process ensures you receive a quality product consistently.


• Earth Bar resists water corrosion and provides enhanced conductivity, due to its improved water resistance.

• Used for connecting wires for electrical meters and fuse links are used with electrical fuses.


• Brass Earth Bars protects against atmospheric corrosion and hence provides longer life when exposed to corrosive atmospheres.


• Tinned or Brass Earth Bars could be used in external applications or where atmospheric conditions are more severe and aggressive than normal i.e. high moisture content areas, high humidity etc.


• Often used in various marine projects.


• Ideal to ensure complete and easy introduction of the conductor strands.


• Used in panel, telecom and utilities.


• Pre-drilled base holes for ease of installation.

• Any Size available as per custom specification and requirements.

• A range of fittings with high reliability and performance.


• Bronze flexible metal construction.


• Use where strength and corrosion resistance required.


• Adjacent materials including residual core materials.


• Resist the effects of exposure more than bare metal.


• Exhibits some patination or corrosion.

• Used in many applications including plumbing, heating systems, hot water plumbing, pneumatic and marine type construction.


• Resists the harmful effects of corrosion when in contact with fresh or salt water that is polluted with mineral acids.


• Provides a tight seal when installed correctly.


• For use with portable water applications.


• For use in hazardous areas where movement or vibration requires a flexible connection or a difficult bend is required in a conduit system.

• Any Size available as per custom specification.

• Corrosion resistant Brass Auto Parts.


• Withstand high temperature.


• Hassle free installation.


• Robust Construction.


• ROHS Compliant, UL Approved.

• Used in Automotive, Automobile, Plastic Moulding, Aerospace, Instrumentation and different industrial sectors.


• Used in air brakes, hose ends and valves that finding application in automobile and automotive sector.

• Any Size Available as per custom specification.

• Corrosion resistant and reduces lead removal costs.


• Increased Electrical Conductivity.


• Ensure Solid Connections.

• Ideally suited for high load applications.


• For the construction of battery sheds.


• For easy and reliable wiring of accessories.


• Used in different industrial applications.

• Any Size Available as per Custom Specification and Requirements.

• Available in standard metric range.


• RoHS compliant.


• Available in male/male, male/female and female/female orientations.


• Short Lead Time also available.


• Able to perform under severe conditions such as high mechanical load.


• Corrosion Resistance.


• Custom body lengths and thread types available.

• For variety of assembly applications.


• Used in mechanics and electronics to separate two parts from one another.


• Used to secure cables to the external ports.


• Ideal for heavy duty and high temperature applications.


• Offer excellent Electrical Insulation.


• Provide fully insulated and strong fixing for Printed Circuit Boards and Busbars etc.

• Any Size available as per custom specification and requirements.

• Machines with numerous capabilities.


• Cast in a specific shape and design to form a certain structure.


• Base or central foundation of casting defines the overall shape of the casting.


• Consequently, the metal cast may resemble a simplistic design of a circle or rectangle.


• The casting method depends on the metal or alloy being cast, and the dimensions and geometry of the part design, among other factors.


• Accepts higher tolerances for more detailed part designs.


• Creates closer to net-shape parts that require less secondary machining/processing.


• Nearly always lighter than otherwise-identical forged parts.


• Easier and less time-consuming modification of part designs and accompanying molds.

• Useful at the early development stage if the chosen route to production is pressure die casting, sand casting or investment casting for instance.


• Used to design depressions in the form of holes and slots on the surface.


• Suited for making parts that require internal cavities.


• Used to shape a solid piece of metal into its desired shape.


• Mechanically Stronger Parts with greater impact strength, shear strength and wear resistance.

• Any Size Available as per Custom Specification and Requirements.

• Complete reliability.


• Absolutely certain discrimination.


• Provision for manual control.


• Quick operational Parts.


• Usable with Low voltage (LV) Switchgear, Medium voltage (MV) Switchgear, High voltage (HV) Switchgear.


• Utilized to minimize the flow of electrical energy when any problem occurs in the electrical circuits.


• Corrosion Resistance, High Strength and Precision Made.

• For use in electrical purposes which has been in use as safety purposes.


• Preferred choice for large scale and small scale applications.


• Used as a circuit breaker with a purpose for short circuit or overload protection.


• Utilized in many industrial, mechanical and engineering applications.


• For protecting household electrical circuit against short circuit and over current faults.

• Standard barrel Copper cable Lugs and splices for copper class 2r rigid stranded conductor sizes 4mm2 630mm2, copper class 5f flexible stranded conductor sizes 4mm2 300mm2 and copper class 6f flexible stranded conductor sizes 10mm2 240mm2.


• Standard barrel Copper Cable Lugs with 45 and 90 bent palms for copper class 2r rigid stranded conductor sizes 10mm2 300 mm2, copper class 5f flexible stranded conductor sizes 10mm2 300mm2 and copper class 6f flexible stranded conductor sizes 10mm2 240mm2.


• Long barrel Copper Cable lugs for copper class 2r rigid stranded conductor sizes 10mm2 630mm2, copper class 5f flexible stranded conductor sizes 10mm2 300mm2, and copper class 6f flexible stranded conductor sizes 10mm2 240mm2.

• Fully annealed


• ROHS Compliant


• Also include crimp lines for improved accuracy during installation.


• Easy to use in conjunction with mechanical or hydraulic crimping equipment.


• Heat shrink can be formulated to be flame retardant.


• Heat shrinkable moulded shapes.


• End caps & breakout boots for power cables.


• Specialised military heat shrink.

• Standard duty copper cable lugs and ferrules for use with copper cables and wires in general industrial, commercial and domestic applications.


• Heavy duty copper cable lugs and ferrules for use with copper cables and wires in specialised applications such as medium and high voltage electrical reticulation systems.


• Aluminium cable lugs and ferrules for use with aluminium cables in electrical reticulation systems.


• Copper and Aluminium shear lugs for applications where crimping equipment cannot be used.


• Bi-metal lugs for mating copper and aluminium conductors to prevent dissimilar metal corrosion.


• The termination of cables and wires in electrical reticulation systems and equipment.


• The joining of cables and wires in electrical reticulation systems and equipment.

• Hex lock nuts are the most common type of lock nut. They have six uniform sides that create a flat bearing surface.

• DIN 436 Square Washers feature a large outside diameter to distribute the load on sheet metal surfaces.


• The zinc plated finish helps to resists corrosion in demanding application.


• For Wood Construction and screws.


• Available as per custom specification.

• Brass Sleeve Anchors allow them to anchor into concrete, brick and block.


• Each part is plated or coated and assembled into a complete ready to use anchor.


• The anchor consists of a threaded stud with an outwardly flared cone shaped end.


• A tubular expander sleeve is assembled over the stud and butted against the small diameter of the cone.


• A washer and hex nut are then assembled on the stud to complete the anchor.


• Brass Sleeve Anchor works on a true expansion principle: Tightening of the nut pulls the cone-shaped stud end into the expander sleeve, wedging it outward and locking the anchor into the base material.


• Widely used for medium duty application into concrete, brick and block.

Material:

• Insulator: Polypropylene, 360 Brass, Copper


• Movable Bar/ Fixed Bar: Nickel Plating Copper


• Basement: Reinforced polypropylene


• Bolt and Nut: Nickel Plating Brass, Trivalent Chromate Plating steel

Mounting:

• DIN rail-mountable

Ground:

• Rated surge voltage: 8 kV


• Surge voltage category: III


• Connection in acc. with standard: IEC 60947-7-2

Connections:

• Connections: Spring cage


• Wire: 2810 AWG


• Stripping length: 3/8 in. (0.95 cm)


• Internal cylindrical gage: A4

• High-grade, strain-crack and corrosion proof copper alloys and 360 Brass alloy to prevent electrolytic corrosion and rusting.


• Screw locking maintenance-free design ensures proper operation and prevents screws from backing out, so tightening of the terminal screws is not necessary.


• As the Earth Terminal will be fastened on to cabinet enclosure by using screw.


• The work at the time of expansion and the renovation on site will become easy.


• In case that welding inside the cabinet enclosure with surface treated steel plate might be difficult, this earth terminal will be convenient and useful.

• Use to measure the earth resistance of electrical instruments and electrical circuits.


• Use for the wiring to grounding circuits at Cubicles, Earth terminal boards.


• For use in all industries with potentially explosive atmospheres.


• Reliable protection against transient overvoltage and electromagnetic fields.


• For temperature-related fluctuations in pressure on the cable.

• Material: High quality Copper, Aluminum, Free Cutting Brass, CDA 360 Grade Brass or any standard Brass.


• Surface Plating: Dull Tin Plating, Zinc Finish, Bright Zinc Finnish, Tin Finish, etc.


• Conformal Standards: IEC 61219, ASTM B687 99, DIN Standards.

• Easily adapted to conductor sizes up to 50 mm2 by using one of the three cable sockets.


• Designed & Manufactured under strict and approved quality control procedures.


• Red for Non-corrosive dry atmosphere and Blue for corrosive humid conditions.


• All Earth Clamps have anodized Aluminium Labels indicating terminal size.


• Meet the demands of required earth termination systems.


• Ensure a low resistance and corrosion resistance connection between Termination and down conductors.


• High Mechanical Strength, Excellent Corrosion Resistance and conductivity.

• Grounding clamps are used to connect the grounding electrode conductor to the ground rod.


• Mechanical Earth Clamps have set screws to tighten the clamp around the ground rod to form a connection.


• Provides a stable earth for circumferential welding of pipes and fittings and eliminates weld pinholes caused by poor earthing.

• Solid Copper Earth Rods feature an internal tapped hole at each end which allows them to be joined together with the use of a coupling dowel.


• When deep driving a solid copper earth rod the usual practice is to insert the rod into a bore hole and backfill with either Low-Resistance Earthing Compound or Bentonite.


• Available with different threaded version.


• Threads are formed by roll threading process to ensure extra strength and avoid the risk of chipping while driving the rods in the ground.

• For earthing Installation.


• Solid copper earth rods are installed where extremely high corrosion resistance and exceptionally long service are required.


• Commonly used where soil conditions are more aggressive, i.e. areas with high levels of salt content.

• Threads are rolled by roll threading process, which ensures treat a wen copper covers are maintained, wen at the root of the thread.


• Roll thread gives greater strength than cut thread.


• Thread rolling process raises the surface of the rod.


• Rods have a high carbon steel core and tip that provide superior strength when driving.


• Molecular bond to nickel-sealed high strength steel core.


• Perfectly bonded rod will lose longer, drive easier and will not crack.


• Corrosion resistance while providing tee lowest resistance to ground.

• Used in various sectors including Lightning Protection System, Power generators, Solar system, Sugar and paper Industry, Transmission and power generators, Telecommunication Industry, Manufacturing Facilities and Refineries & Equipment Body Earthing.


• Suitable for different humidity, temperature and PH value of the soil conditions.


• Ideal for deep driving whilst also provides lasting resistance to corrosion.


• Ideally used in applications where soil conditions are very aggressive.

Surface Plating:

• The coating thickness for copper-coated rods shall not be less than 0.010 inch thick at any point on the rod when measured with an eddy-current device per ASTM E-376.


• 99.9% pure electrolytic copper coating.


• Minimum copper coating of 10 mils on rods.

• Strong, Lightweight and Compact.


• Available in a variety of thread combinations and connections.


• Low to medium pressure lines.


• Yellow brass plating. Bagged.


• Material strong enough to minimize potential cross threading.

Application:

• Common Applications include Horticultural, Agricultural, Irrigation, Marine & Plumbing.


• Suitable for use above or below ground in varying operating pressures and temperatures.

• Excellent strength & ductility.


• Corrosion resistance.


• Good bearing properties.


• Low magnetic permeability.


• Black anodized for superior performance.


• Available in a variety of thread combinations and connections.

• Suitable for Structure Pipe, Gas Pipe, Hydraulic Pipe and Chemical Fertilizer Pipe.


• Provide female pipe x male pipe thread connections with a hex for use with a wrench.


• For securing the adapters to motor shafts.

• For corrosion resistance, ductility at high temperatures, and low magnetic permeability.


• Manufactured to industry standards for lead-free pipe fittings.


• Tapered pipe threads are manufactured to exacting quality and standards.

Application:

• Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines.


• Used for connecting and extending pipes or fittings.


• Used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries.


• Used in water, refrigeration, instrumentation, hydraulic systems, grease, fuels, LP and natural gas.

• Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines.


• Used for connecting and extending pipes or fittings.


• Used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries.


• Used in water, refrigeration, instrumentation, hydraulic systems, grease, fuels, LP and natural gas.

• Special fitting configurations and/or sizes available.


• Unique design provides a superior noise reduction.


• Capable of a wide range of flow settings.


• Provide a compact male/female pipe to male/female pipe thread connection.

• Protect valves, air tools and air components from dirt and other foreign matter.


• Low profile has many applications for vacuum relief or pressure equalization on gear boxes, oil tanks or reservoirs.


• Also for single acting cylinder ports.


• Provides dual job of metering exhaust air to control cylinder or tool speed.

• Any Size Available as per Custom Specification and Requirements.

• Provides more strength than the plastic style fittings.


• Strong, durable, rustproof, highly resistant to temperature change.


• Permits maximum flow with minimum pressure drop.


• Flare, hose barb and pipe end configurations.


• Low pressure brass hose fittings, couplings and adapters in common configurations, sizes and styles.


• Ensures a perfect seal every time.

• Used anywhere water hoses are connected and disconnected frequently.


• Designed for use with residential and commercial-grade hose.


• Provides strength, durability and longer-lasting performance.

• Any Size available as per custom specification and requirements.

• High Strength, Corrosion Resistance and Electrical Conductivity.


• Resistant to high temperature.


• ROHS Compliant.


• Offer greater stability for installation.


• Available in male/male, male/female and female/female orientations.

• Used to space circuit boards, panels, doors or gears.


• Used for wrench tightening.


• Used to secure cables and ports.


• In electronics, frequently used to raise a printed-circuit board above a surface.


• For fastening applications in the electrical engineering and electronics sector.

• Serve to isolate the ends of the winding from the tank and to attach them to various elements of the electrical installation.


• Distinguished by a wide variety of shapes, designs and sizes, depending on the voltage, power, installation location and customer specification.


• The internal installation has a smooth or finely-brushed surface.


• Safety requirements in accordance with GOST 12.2.007.2-75. Protection class 1 according to GOST 12.2.007.0-75.


• Fire safety GOST 12.1.004-91.


• Detachable plug-in fittings made of dezincification-resistant brass for improved performance.


• Degree of protection IP00.


• Ambient air temperature from -40 C to +40 .

• Prevent oil leakage between the stud and insulator.


• Brass studs are designed for electrical connection between the transformer windings and a suitable input pin line, the transformer pin.


• Brass Transformer Insulators are designed for isolation of the transformer tank from current-carrying studs.


• Insulating Heads with O-Vi coating are designed for fixing the sealant over insulated head.


• The contact clamps are designed to provide reliable contact of the trunking of the transformer substation on the LV side with current-carrying parts of the power transformer terminals on the LV side, and also to reduce the effect of the transient processes in the electric network. It should be taken into account that bolt contacts require periodic monitoring and tightening of bolts.


• Used in transformers for electrical engineering and energy distribution, i.e. in power plants and substations, in local distribution networks, in wind power generation, in industrial plants and in the power supply units of electronic devices.

• Any Size Available as per Custom Specification and Requirements.

• Ensuring sufficient rigidity of the structure.


• Reduction to a minimum of the number of work piece settings during its processing.


• The availability of elements of the work piece, ensuring its secure attachment in the device.


• The absence or minimization of the number of blind holes and holes located at right angles to the main coordinate axes of the parts.


• The maximum possible unification of the shape and size of the machined elements to ensure the minimum number of processing tools and the use of standard subroutines.


• Allowance for machining is minimal, but sufficient to obtain the specified parameters of accuracy and roughness.

• Used for external machining of shafts and other components.


• For used in CNC Machining Process, Turning Process and Lathe Process.


• Simplifies the assembly process and improves the performance of machines, units and assemblies.


• For manufacturing medical device, geometry devices and more.

• Any Size Available as per Custom Specification and Requirements.

• Powder coated bases can be supplied to reduce the risk of corrosion.


• Pre-drilled fixing holes for ease of installation (these can be threaded if required).


• We use the highest quality raw materials.


• The manufacturing process ensures you receive a quality product consistently.


• Earth Bar resists water corrosion and provides enhanced conductivity, due to its improved water resistance.

• Used for connecting wires for electrical meters and fuse links are used with electrical fuses.


• Brass Earth Bars protects against atmospheric corrosion and hence provides longer life when exposed to corrosive atmospheres.


• Tinned or Brass Earth Bars could be used in external applications or where atmospheric conditions are more severe and aggressive than normal i.e. high moisture content areas, high humidity etc.


• Often used in various marine projects.


• Ideal to ensure complete and easy introduction of the conductor strands.


• Used in panel, telecom and utilities.


• Pre-drilled base holes for ease of installation.

• Any Size available as per custom specification and requirements.

• A range of fittings with high reliability and performance.


• Bronze flexible metal construction.


• Use where strength and corrosion resistance required.


• Adjacent materials including residual core materials.


• Resist the effects of exposure more than bare metal.


• Exhibits some patination or corrosion.

• Used in many applications including plumbing, heating systems, hot water plumbing, pneumatic and marine type construction.


• Resists the harmful effects of corrosion when in contact with fresh or salt water that is polluted with mineral acids.


• Provides a tight seal when installed correctly.


• For use with portable water applications.


• For use in hazardous areas where movement or vibration requires a flexible connection or a difficult bend is required in a conduit system.

• Any Size available as per custom specification.

• Corrosion resistant Brass Auto Parts.


• Withstand high temperature.


• Hassle free installation.


• Robust Construction.


• ROHS Compliant, UL Approved.

• Used in Automotive, Automobile, Plastic Moulding, Aerospace, Instrumentation and different industrial sectors.


• Used in air brakes, hose ends and valves that finding application in automobile and automotive sector.

• Any Size Available as per custom specification.

• Corrosion resistant and reduces lead removal costs.


• Increased Electrical Conductivity.


• Ensure Solid Connections.

• Ideally suited for high load applications.


• For the construction of battery sheds.


• For easy and reliable wiring of accessories.


• Used in different industrial applications.

• Any Size Available as per Custom Specification and Requirements.

• Available in standard metric range.


• RoHS compliant.


• Available in male/male, male/female and female/female orientations.


• Short Lead Time also available.


• Able to perform under severe conditions such as high mechanical load.


• Corrosion Resistance.


• Custom body lengths and thread types available.

• For variety of assembly applications.


• Used in mechanics and electronics to separate two parts from one another.


• Used to secure cables to the external ports.


• Ideal for heavy duty and high temperature applications.


• Offer excellent Electrical Insulation.


• Provide fully insulated and strong fixing for Printed Circuit Boards and Busbars etc.

• Any Size available as per custom specification and requirements.

• Machines with numerous capabilities.


• Cast in a specific shape and design to form a certain structure.


• Base or central foundation of casting defines the overall shape of the casting.


• Consequently, the metal cast may resemble a simplistic design of a circle or rectangle.


• The casting method depends on the metal or alloy being cast, and the dimensions and geometry of the part design, among other factors.


• Accepts higher tolerances for more detailed part designs.


• Creates closer to net-shape parts that require less secondary machining/processing.


• Nearly always lighter than otherwise-identical forged parts.


• Easier and less time-consuming modification of part designs and accompanying molds.

• Useful at the early development stage if the chosen route to production is pressure die casting, sand casting or investment casting for instance.


• Used to design depressions in the form of holes and slots on the surface.


• Suited for making parts that require internal cavities.


• Used to shape a solid piece of metal into its desired shape.


• Mechanically Stronger Parts with greater impact strength, shear strength and wear resistance.

• Any Size Available as per Custom Specification and Requirements.

• Complete reliability.


• Absolutely certain discrimination.


• Provision for manual control.


• Quick operational Parts.


• Usable with Low voltage (LV) Switchgear, Medium voltage (MV) Switchgear, High voltage (HV) Switchgear.


• Utilized to minimize the flow of electrical energy when any problem occurs in the electrical circuits.


• Corrosion Resistance, High Strength and Precision Made.

• For use in electrical purposes which has been in use as safety purposes.


• Preferred choice for large scale and small scale applications.


• Used as a circuit breaker with a purpose for short circuit or overload protection.


• Utilized in many industrial, mechanical and engineering applications.


• For protecting household electrical circuit against short circuit and over current faults.

• Standard barrel Copper cable Lugs and splices for copper class 2r rigid stranded conductor sizes 4mm2 630mm2, copper class 5f flexible stranded conductor sizes 4mm2 300mm2 and copper class 6f flexible stranded conductor sizes 10mm2 240mm2.


• Standard barrel Copper Cable Lugs with 45 and 90 bent palms for copper class 2r rigid stranded conductor sizes 10mm2 300 mm2, copper class 5f flexible stranded conductor sizes 10mm2 300mm2 and copper class 6f flexible stranded conductor sizes 10mm2 240mm2.


• Long barrel Copper Cable lugs for copper class 2r rigid stranded conductor sizes 10mm2 630mm2, copper class 5f flexible stranded conductor sizes 10mm2 300mm2, and copper class 6f flexible stranded conductor sizes 10mm2 240mm2.

• Fully annealed


• ROHS Compliant


• Also include crimp lines for improved accuracy during installation.


• Easy to use in conjunction with mechanical or hydraulic crimping equipment.


• Heat shrink can be formulated to be flame retardant.


• Heat shrinkable moulded shapes.


• End caps & breakout boots for power cables.


• Specialised military heat shrink.

• Standard duty copper cable lugs and ferrules for use with copper cables and wires in general industrial, commercial and domestic applications.


• Heavy duty copper cable lugs and ferrules for use with copper cables and wires in specialised applications such as medium and high voltage electrical reticulation systems.


• Aluminium cable lugs and ferrules for use with aluminium cables in electrical reticulation systems.


• Copper and Aluminium shear lugs for applications where crimping equipment cannot be used.


• Bi-metal lugs for mating copper and aluminium conductors to prevent dissimilar metal corrosion.


• The termination of cables and wires in electrical reticulation systems and equipment.


• The joining of cables and wires in electrical reticulation systems and equipment.