Post Buy Requirement
BC
Chennai, Tamil Nadu, India
Add Review

Industrial Valves #5318702

Angle Control Valve

  • Feature Long service life and Stainless steel housing with thread, clamp and weld end connection
The parabolic trim results in a flow characteristic approximately 35% larger than conventional control valves. It is available in either stainless steel on stainless steel or with a durable PTFE seal for tight shut-off.
View Complete Details

Pneumatic Butterfly Valves

  • Feature Compact design and High flow rate
The connection between the flap and the actuator follows a standard interface (flange connection). The rotary movement in the actuator is achieved by a linear piston with a steep-threaded spindle. The rotary actuator moves the butterfly valve by max. 90. The compact electropneumatically actuated control valve can be used for a wide range of applications and media. NOTE: The use of these control valves is only useful in a process control loop; The valve is not suitable for direct position control.
View Complete Details

Pneumatic Diaphragm Valves

Pilot controlled diaphragm valve with pneumatically operated piston actuator and valve body from cold-formed stainless steel pipe. Actuator from PA or PPS.

Flow optimized and deadleg free bodies
Hermetical separation of fluids from the operating mechanism by diaphrag
View Complete Details

Direct Acting Solenoid Valve

  • Feature Seat valve, direct-acting , Port connection size up to G 1/2
This direct-acting plunger solenoid valve Type 0256 can be used in many ways. It is delivered with brass or stainless steel bodies for a wide range of orifices and connections.
View Complete Details

Plunger Valve

  • Features Vibration-proof, bolted coil system , Explosion proof versions
The coils are moulded with chemically resistant epoxy. 'Kick and Drop' electronics are available for overexcitation (plug 2511) for the reduction of electrical power consumption during operation. An optional sliding ring bearing increases the service life with dry gases
View Complete Details

Direct Acting Valves

Direct-acting, compact small-format valve with diameter of up to DN 1.6
Vibration-proof, bolted coil system
Banjo threaded connection for direct mounting on pneumatic valves
Simple and quick push-in, flange, or manifold installation
Service-friendly manual override
View Complete Details

Metal Diaphragm Valves

  • Feature Hermetical separation of fluids from the operating mechanism by diaphragm
The material combinations are selectable. The diaphragm is both a switch element and a sealing element to the outside. It can be easily replaced. The flow can be continually adjusted with the manually actuator. The valves have no dead volume and can be mounted to be self-draining. This enables high flow capacities and a variety of applications to be realized. The valves are autoclavable.
View Complete Details

Diaphragm Actuated Valves

Pilot controlled diaphragm valve with pneumatically operated piston actuator and valve body from cold-formed stainless steel pipe. Actuator from PA or PPS.

Flow optimized and deadleg free bodies
Hermetical separation of fluids from the operating mechanism by diaphragm
For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.
View Complete Details

Plastic Diaphragm Valve

  • Feature Flow optimized and deadleg free bodies and Robust actuators with modular acessory program
Pilot controlled diaphragm valve with pistonactuator and diaphragm seal. As standard, actuator from PA. The flow optimised and zero dead volume valve body makes high flow rates possible.
View Complete Details

Steam Solenoid Valve

Direct-acting plunger solenoid Type 0355 for controlling hot media like steam, oil and gas

32-way-valve
Push-over solenoid system
Media temperature up to +180C
for liquide and gasouse nedia
View Complete Details

Angle Seat Valve

  • Feature Long service life , High flow rate
The actuator is available in two different materials, depending on the ambient temperature. High flow rates are attained with the virtually straight flow path. The reliable selfadjusting packing gland provides high sealing integrity. These maintenance-free and robust valves can be retrofitted with a comprehensive range of accessories for position indication, stroke limitation or manual override
View Complete Details

Digital Control Valves

  • Feature Switchable standard input signal and Infinitely variable PWM frequency
An internal current control with the duty factor of the PWM signal as manipulated variable ensures that every value of the input signal, irrespective of the thermal condition of the coil, is unambiguously assigned a given value of the effective coil current.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Burkert Contromatic PVT Ltd (Burkert Contromatic PVT Ltd)
  • No M6, Type - II, Thiruvanmyur Dr Vikram Sarabhai Instronic Estate 600041, Thiruvanmiyur, Chennai, Tamil Nadu
  • Share us via
Retailer of Industrial Valves from Chennai, Tamil Nadu by Burkert Contromatic PVT Ltd
Post Buy Requirement
BC
Chennai, Tamil Nadu, India
Add Review

Industrial Valves #5318702

Angle Control Valve

  • Feature Long service life and Stainless steel housing with thread, clamp and weld end connection
The parabolic trim results in a flow characteristic approximately 35% larger than conventional control valves. It is available in either stainless steel on stainless steel or with a durable PTFE seal for tight shut-off.
View Complete Details

Pneumatic Butterfly Valves

  • Feature Compact design and High flow rate
The connection between the flap and the actuator follows a standard interface (flange connection). The rotary movement in the actuator is achieved by a linear piston with a steep-threaded spindle. The rotary actuator moves the butterfly valve by max. 90. The compact electropneumatically actuated control valve can be used for a wide range of applications and media. NOTE: The use of these control valves is only useful in a process control loop; The valve is not suitable for direct position control.
View Complete Details

Pneumatic Diaphragm Valves

Pilot controlled diaphragm valve with pneumatically operated piston actuator and valve body from cold-formed stainless steel pipe. Actuator from PA or PPS. Flow optimized and deadleg free bodiesHermetical separation of fluids from the operating mechanism by diaphrag
View Complete Details

Direct Acting Solenoid Valve

  • Feature Seat valve, direct-acting , Port connection size up to G 1/2
This direct-acting plunger solenoid valve Type 0256 can be used in many ways. It is delivered with brass or stainless steel bodies for a wide range of orifices and connections.
View Complete Details

Plunger Valve

  • Features Vibration-proof, bolted coil system , Explosion proof versions
The coils are moulded with chemically resistant epoxy. 'Kick and Drop' electronics are available for overexcitation (plug 2511) for the reduction of electrical power consumption during operation. An optional sliding ring bearing increases the service life with dry gases
View Complete Details

Direct Acting Valves

Direct-acting, compact small-format valve with diameter of up to DN 1.6Vibration-proof, bolted coil systemBanjo threaded connection for direct mounting on pneumatic valvesSimple and quick push-in, flange, or manifold installationService-friendly manual override
View Complete Details

Metal Diaphragm Valves

  • Feature Hermetical separation of fluids from the operating mechanism by diaphragm
The material combinations are selectable. The diaphragm is both a switch element and a sealing element to the outside. It can be easily replaced. The flow can be continually adjusted with the manually actuator. The valves have no dead volume and can be mounted to be self-draining. This enables high flow capacities and a variety of applications to be realized. The valves are autoclavable.
View Complete Details

Diaphragm Actuated Valves

Pilot controlled diaphragm valve with pneumatically operated piston actuator and valve body from cold-formed stainless steel pipe. Actuator from PA or PPS. Flow optimized and deadleg free bodiesHermetical separation of fluids from the operating mechanism by diaphragmFor selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.
View Complete Details

Plastic Diaphragm Valve

  • Feature Flow optimized and deadleg free bodies and Robust actuators with modular acessory program
Pilot controlled diaphragm valve with pistonactuator and diaphragm seal. As standard, actuator from PA. The flow optimised and zero dead volume valve body makes high flow rates possible.
View Complete Details

Steam Solenoid Valve

Direct-acting plunger solenoid Type 0355 for controlling hot media like steam, oil and gas 32-way-valvePush-over solenoid systemMedia temperature up to +180Cfor liquide and gasouse nedia
View Complete Details

Angle Seat Valve

  • Feature Long service life , High flow rate
The actuator is available in two different materials, depending on the ambient temperature. High flow rates are attained with the virtually straight flow path. The reliable selfadjusting packing gland provides high sealing integrity. These maintenance-free and robust valves can be retrofitted with a comprehensive range of accessories for position indication, stroke limitation or manual override
View Complete Details

Digital Control Valves

  • Feature Switchable standard input signal and Infinitely variable PWM frequency
An internal current control with the duty factor of the PWM signal as manipulated variable ensures that every value of the input signal, irrespective of the thermal condition of the coil, is unambiguously assigned a given value of the effective coil current.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Burkert Contromatic PVT Ltd (Burkert Contromatic PVT Ltd)
  • No M6, Type - II, Thiruvanmyur Dr Vikram Sarabhai Instronic Estate 600041, Thiruvanmiyur, Chennai, Tamil Nadu
  • Share us via