Our Products

10 Products available

Our Products #9206074

CLIP-ON POWER FACTOR METER

Frequency 47 - 53 H Z
Weight 1.8 kg (approx)
Core - Gap 55 mm Maximum
Dielectric Test Voltage 2 KVAC ( r.m.s. ) for 1 min.
Insulation Resistance Test Over 25 ohm at 500v DC
Scale length 70 mm (approx)
Dimensions (In mm) 330 x 99 x 98
Response Time Less than 1.8 kg (approx)
Calibration 50 H 1 AC Supply
Confirms to IS 1248 - 1983
Accuracy ± 3* (expressed as phase angle)
Indicator Analogue, Moving Coil Type Indicating Meter
Accessories (Standard) (1) Potential Leads - 1 pair, (2) Operator"s Manual - 1No. (3) Carrying Case - 1N0. Accessory (optional), Neutral Box.

View Complete Details

Ask Latest Price & Details

Motorised Insulation Tester

Feature Accurate, Quick response and Graceful Appearance, Operated by 230volts, 50Hz AC mains
Scale Length 100mm (approx.)
Mains Supply 230V, 50Hz
Accuracy As per IS: 2992-1987
Dimensions (in inch) 14 x 10 x 10 (approx.) (Incl. Top Cover)
Weight (Incl. Top Cover) 9 kg. (approx.)for CIE/777 & 12 kg. (approx.) for CIE/777HM
Standard Mains cord (2mtrs length) - 1 No
Optional (At extra cost) H. V. Testing leads - 1 pair (2mtrs length), Rexine carrying case
Optional Extra Facility (at extra cost) 15 minuites Timer Facility
Response Time 3 seconds
High Voltage Test Withstands minimum 2 KV or (rated voltage + 1) KV A.C. (rms) for 1 min. between the electrical circuit & containing case
Insulation Resistance Test Better than 50 Megohms at 500 V D.C. between the electrical circuit & the containing case

View Complete Details

Ask Latest Price & Details

HIGH VOLTAGE BREAKDOWN TESTER

SALIENT FEATURES Robust Powder Coated Sheet Metal Case, Elegant Look, KV Meter to Read The Output Voltage, Millimeter to Show Leakage Current, Speedy and Accurate Testing of Breakdown/Withstand Test of Electrical & Electronic Components, Materials, Equipments, Panel Board Etc
Input Voltage 230V, +/- 10%, 50Hz, 1 phase A.C.
Output Voltage Continiously variable from(i) 0 to 3 KV AC for 3 KV Test Set(ii) 0 to 5 KV AC for 5 KV Test Set
Capacity 50 mA maximum in the H.V. Side
Tripping Current 25 mA & 50 mA (Toggle Switch Provided)
Duty Cycle Intermittent i.e., 5 minuites 'ON' & 10 minuites 'OFF'
MODE OF OPERATION Manual

View Complete Details

Ask Latest Price & Details

ELECTRIC MOTOR CHECKER

Weight 2.335 kg (with Batteries) (Approx)
Insulation Resistance 0-20 Megohms at 500 V DC, Max. Current 0.25 mA (with electronic Zero set facility)
Resistance 0-60 Megohms in 6 ranged (0-0.2 Megohms FSD in Range 1) (i.e. 0-0.2 / 0.6 / 2 / 6 / 20 / 60 Megohms marked as % on dial)
Inductance 0-300 mH in 6 ranged (0-1 mH FSD in Range 1) (i.e. 0-1 / 3 / 10 / 30 / 100 / 300 mH, Marked as % on dial)
Self Battery Test To check the condition of the battery of the instrument itself
Power Source 1.5V x 6 Nos AA size cells or 230V AC, 50Hz (Provided with inbuilt 9V Battery Eliminator Adaptor)
Dimensions 233mm x 216mm x 115mm (Approx)
SALIENT FEATURES Spring Loaded Shock Proof Pivot Jewel Type indicating meter, Most reliable and perfect actioned Rotary Switches for function and range selection, Push to test, to Save Power, Electronic zero Set for Insulation Resistance, Self Battery Test

View Complete Details

Ask Latest Price & Details

Digital Earth Tester

Display 3½ Digits, LCD
Standard Accessories (i) Carrying Case (ii) Charging Cord (iii) Instruction Manual
Optional Accessories (at extra cost) 4 Nos. M. S. Spike (45 cm Length) • 4 Nos. Rolls of flexible wire wound on spool ( 10 mts., 20 mts,
AVAILABLE IN DUAL RANGES (a) 0 - 20 - 200 OHM (b) 0 - 10 - 1000 OHM (c) 0 - 100 - 1000 OHM (d) 0 - 5 - 500 OHM (e) 0 - 10 - 1
SALIENT FEATURES Rugged ABS body, Easy to use hand held meter, Ni-cd Re- chargeable Cells, Facility as to make bench top type instrument, Confirms to ISS : 9223/1979, Four terminals (To measure earth resistance as well as specific soil resistivity), Lo-Bat or Δ indication appe

View Complete Details

Ask Latest Price & Details

AC CLAMP METER

Weight 1.6 Kg (approx.)
Accuracy +/- 5% F.S.D. for Current, +/- 3% F.S.D. for Voltage
Calibration 50Hz, A.C. Supply
Scale Length 50mm (approx.)
Core Gap 55mm Maximum (approx.)
Dimensions (In mm) 330 x 99 x 88 (approx.)
H. V. Test 2KV AC (rms) for 1 min.
Insulation Resistance Test Over 20 Megohms at 500 V DC

MODEL NO	A. C. CURRENT	A. C. VOLTAGE
R7VA1 R7VA2 R7VA3 R4A2V R2A3V1 R2A3V2 R7A	0-10/30/100/300/1000A 0-10/25/100/250/1000A 0-50/100/250/500/1000A 0-50/100/200/400A 0-60/300A 0-25/125A 0-10/25/50/100/250/500/1000A	0-300/600V 0-300/600V 0-300/600V 0-300/600V 0-150/300/600V 0-150/300/600V N.A.

View Complete Details

Ask Latest Price & Details

PHASE SEQUENCE INDICATOR

Frequency 25-60Hz
Standard Accessories Rexine carrying case
Working Voltage 100V to 500V AC at 25Hz to 65Hz
Dimensions 96mm x 96mm
Rating 30 seconds @ 500 V, Burden – 15VA @ 500 V, Voltage – 50-500V (in horizontal position), 100-500V (in vertical position)

View Complete Details

Ask Latest Price & Details

DIGITAL INSULATION TESTER

Application Ideal for Insulation Measurement of Electrical Equipments (Motor, Transformer, Machine etc.), Household Appliances ( Mixer, Toaster, Washing Machine Etc., ), Industrial, Commercial & Residential Installations, Electrical Cables for Distribution Networks, Cable
SPECIAL FEATURES Rugged ABS body, Easy to use hand held meter, Ni-cd Re-chargeable Cells, Facility as to make benchtop type instrument, Accurate and Quick response, Graceful Appearance, Direct Measurement of Insulation Resistance, Lo-Bat Indication on Display
Display 3 1/2 Digits, L.C.D.
Accuracy Insulation ± 3% of F.S. ± 5 digits. Out put Voltage (DC) ±10% at rated resistance
Confirms to ISS 10656 - 1983
Dimensions (in mm) 172x98x38 (Approx)
H. V. Test 2KV AC (r.m.s.) For 1 min.Between electrical circuit and containing case.
Insulation Resistance Test More than 50 M Ohm at 500V DC between electrical circuit & containing case.
Standard Accessories Carrying Case, Charging Cord, Testing Lead (1m length), Instruction Manual
Guarantee Guaranteed for 12(twelve) months against any manufacturing defects.

View Complete Details

Ask Latest Price & Details

Digital Clamp Meter

Frequency 2 kHz , 20 kHz
Display 3½ Digit, 1999 counts, liquid Crystal Display
Jaw opening capability 55mm (max. conductor size)
DC VOLTAGE 2V / 20V / 200V / 1000V
AC VOLTAGE 200V / 750V
AC CURRENT 20A / 200A / 1000A
RESISTANCE 200 OHM / 20K OHM / 2 M OHM
TEMPERATURE 0ºC TO 750ºC
SALIENT FEATURES Accurate, Reliable, Safe, Easy to Use, Attractive Look, Large LCD For Easy Reading, Back Light Display, Data Hold Facility, Low Battery Indication, Diode & Audible Continuity Test Facility

View Complete Details

Ask Latest Price & Details

DIGITAL MULTIMETER

Operating Temperature 0 - 40ºC, 32ºF - 122ºF (<80% RH, <10ºC non-condencing)
Power Source 4.5V
Weight 360g. Approx (Battery Included).
Application With Frequency, Temperature, Voltage, Resistance, Diode & Audible continuity testing.
Display 3¾ Digits, LCD Display . Automatic Indication of functions & symbols
Range Selections Automatic & Manual
Over Range Indication LCD will display "OL"
Low Battery Indication The *±* is displayed when the battery is under the proper operation range.
Polarity Indication *_* displayed automatically
STORAGE TEMPERATURE -10 - 60ºC, 14ºF - 140ºF (<70% RH, battery removed )
Fuse Protection uA and mA , F500 / mA / 250V 5X20, A , F 10A / 250V 6.3X32.
Sample Range 3 times / sec for digital data
Battery Type AAA 1.5V.
Dimensions 185(L) X 87 (W) X53 (H) mm.
SPECIAL FEATURES Secondary Injection Moulded Case, VAC, VDC, mVDC, ohms, Capacitance, Frequency (upto 100kHz), AC / DC amps, AC / DC milliamps, AC / DC micro-amps, Temperature ( -50*C - 100*C ), Relative mode, DATA Hold

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Mr. Rajesh Sharma (Cambridge Instruments & Engineering Co.)
55 Ezra Street, 4th Floor, Kolkata - 700001, West bengal, India
Share us via
Found Something Wrong with this Listing? Report Here.

View Contact No.

Our Products

10 Products available

Our Products #9206074

CLIP-ON POWER FACTOR METER

Frequency 47 - 53 H Z
Weight 1.8 kg (approx)
Core - Gap 55 mm Maximum
Dielectric Test Voltage 2 KVAC ( r.m.s. ) for 1 min.
Insulation Resistance Test Over 25 ohm at 500v DC
Scale length 70 mm (approx)
Dimensions (In mm) 330 x 99 x 98
Response Time Less than 1.8 kg (approx)
Calibration 50 H 1 AC Supply
Confirms to IS 1248 - 1983
Accuracy ± 3* (expressed as phase angle)
Indicator Analogue, Moving Coil Type Indicating Meter
Accessories (Standard) (1) Potential Leads - 1 pair, (2) Operator"s Manual - 1No. (3) Carrying Case - 1N0. Accessory (optional), Neutral Box.

View Complete Details

Ask Latest Price & Details

Motorised Insulation Tester

Feature Accurate, Quick response and Graceful Appearance, Operated by 230volts, 50Hz AC mains
Scale Length 100mm (approx.)
Mains Supply 230V, 50Hz
Accuracy As per IS: 2992-1987
Dimensions (in inch) 14 x 10 x 10 (approx.) (Incl. Top Cover)
Weight (Incl. Top Cover) 9 kg. (approx.)for CIE/777 & 12 kg. (approx.) for CIE/777HM
Standard Mains cord (2mtrs length) - 1 No
Optional (At extra cost) H. V. Testing leads - 1 pair (2mtrs length), Rexine carrying case
Optional Extra Facility (at extra cost) 15 minuites Timer Facility
Response Time 3 seconds
High Voltage Test Withstands minimum 2 KV or (rated voltage + 1) KV A.C. (rms) for 1 min. between the electrical circuit & containing case
Insulation Resistance Test Better than 50 Megohms at 500 V D.C. between the electrical circuit & the containing case

View Complete Details

Ask Latest Price & Details

HIGH VOLTAGE BREAKDOWN TESTER

SALIENT FEATURES Robust Powder Coated Sheet Metal Case, Elegant Look, KV Meter to Read The Output Voltage, Millimeter to Show Leakage Current, Speedy and Accurate Testing of Breakdown/Withstand Test of Electrical & Electronic Components, Materials, Equipments, Panel Board Etc
Input Voltage 230V, +/- 10%, 50Hz, 1 phase A.C.
Output Voltage Continiously variable from(i) 0 to 3 KV AC for 3 KV Test Set(ii) 0 to 5 KV AC for 5 KV Test Set
Capacity 50 mA maximum in the H.V. Side
Tripping Current 25 mA & 50 mA (Toggle Switch Provided)
Duty Cycle Intermittent i.e., 5 minuites 'ON' & 10 minuites 'OFF'
MODE OF OPERATION Manual

View Complete Details

Ask Latest Price & Details

ELECTRIC MOTOR CHECKER

Weight 2.335 kg (with Batteries) (Approx)
Insulation Resistance 0-20 Megohms at 500 V DC, Max. Current 0.25 mA (with electronic Zero set facility)
Resistance 0-60 Megohms in 6 ranged (0-0.2 Megohms FSD in Range 1) (i.e. 0-0.2 / 0.6 / 2 / 6 / 20 / 60 Megohms marked as % on dial)
Inductance 0-300 mH in 6 ranged (0-1 mH FSD in Range 1) (i.e. 0-1 / 3 / 10 / 30 / 100 / 300 mH, Marked as % on dial)
Self Battery Test To check the condition of the battery of the instrument itself
Power Source 1.5V x 6 Nos AA size cells or 230V AC, 50Hz (Provided with inbuilt 9V Battery Eliminator Adaptor)
Dimensions 233mm x 216mm x 115mm (Approx)
SALIENT FEATURES Spring Loaded Shock Proof Pivot Jewel Type indicating meter, Most reliable and perfect actioned Rotary Switches for function and range selection, Push to test, to Save Power, Electronic zero Set for Insulation Resistance, Self Battery Test

View Complete Details

Ask Latest Price & Details

Digital Earth Tester

Display 3½ Digits, LCD
Standard Accessories (i) Carrying Case (ii) Charging Cord (iii) Instruction Manual
Optional Accessories (at extra cost) 4 Nos. M. S. Spike (45 cm Length) • 4 Nos. Rolls of flexible wire wound on spool ( 10 mts., 20 mts,
AVAILABLE IN DUAL RANGES (a) 0 - 20 - 200 OHM (b) 0 - 10 - 1000 OHM (c) 0 - 100 - 1000 OHM (d) 0 - 5 - 500 OHM (e) 0 - 10 - 1
SALIENT FEATURES Rugged ABS body, Easy to use hand held meter, Ni-cd Re- chargeable Cells, Facility as to make bench top type instrument, Confirms to ISS : 9223/1979, Four terminals (To measure earth resistance as well as specific soil resistivity), Lo-Bat or Δ indication appe

View Complete Details

Ask Latest Price & Details

AC CLAMP METER

Weight 1.6 Kg (approx.)
Accuracy +/- 5% F.S.D. for Current, +/- 3% F.S.D. for Voltage
Calibration 50Hz, A.C. Supply
Scale Length 50mm (approx.)
Core Gap 55mm Maximum (approx.)
Dimensions (In mm) 330 x 99 x 88 (approx.)
H. V. Test 2KV AC (rms) for 1 min.
Insulation Resistance Test Over 20 Megohms at 500 V DC

MODEL NO	A. C. CURRENT	A. C. VOLTAGE
R7VA1 R7VA2 R7VA3 R4A2V R2A3V1 R2A3V2 R7A	0-10/30/100/300/1000A 0-10/25/100/250/1000A 0-50/100/250/500/1000A 0-50/100/200/400A 0-60/300A 0-25/125A 0-10/25/50/100/250/500/1000A	0-300/600V 0-300/600V 0-300/600V 0-300/600V 0-150/300/600V 0-150/300/600V N.A.

View Complete Details

Ask Latest Price & Details

PHASE SEQUENCE INDICATOR

Frequency 25-60Hz
Standard Accessories Rexine carrying case
Working Voltage 100V to 500V AC at 25Hz to 65Hz
Dimensions 96mm x 96mm
Rating 30 seconds @ 500 V, Burden – 15VA @ 500 V, Voltage – 50-500V (in horizontal position), 100-500V (in vertical position)

View Complete Details

Ask Latest Price & Details

DIGITAL INSULATION TESTER

Application Ideal for Insulation Measurement of Electrical Equipments (Motor, Transformer, Machine etc.), Household Appliances ( Mixer, Toaster, Washing Machine Etc., ), Industrial, Commercial & Residential Installations, Electrical Cables for Distribution Networks, Cable
SPECIAL FEATURES Rugged ABS body, Easy to use hand held meter, Ni-cd Re-chargeable Cells, Facility as to make benchtop type instrument, Accurate and Quick response, Graceful Appearance, Direct Measurement of Insulation Resistance, Lo-Bat Indication on Display
Display 3 1/2 Digits, L.C.D.
Accuracy Insulation ± 3% of F.S. ± 5 digits. Out put Voltage (DC) ±10% at rated resistance
Confirms to ISS 10656 - 1983
Dimensions (in mm) 172x98x38 (Approx)
H. V. Test 2KV AC (r.m.s.) For 1 min.Between electrical circuit and containing case.
Insulation Resistance Test More than 50 M Ohm at 500V DC between electrical circuit & containing case.
Standard Accessories Carrying Case, Charging Cord, Testing Lead (1m length), Instruction Manual
Guarantee Guaranteed for 12(twelve) months against any manufacturing defects.

View Complete Details

Ask Latest Price & Details

Digital Clamp Meter

Frequency 2 kHz , 20 kHz
Display 3½ Digit, 1999 counts, liquid Crystal Display
Jaw opening capability 55mm (max. conductor size)
DC VOLTAGE 2V / 20V / 200V / 1000V
AC VOLTAGE 200V / 750V
AC CURRENT 20A / 200A / 1000A
RESISTANCE 200 OHM / 20K OHM / 2 M OHM
TEMPERATURE 0ºC TO 750ºC
SALIENT FEATURES Accurate, Reliable, Safe, Easy to Use, Attractive Look, Large LCD For Easy Reading, Back Light Display, Data Hold Facility, Low Battery Indication, Diode & Audible Continuity Test Facility

View Complete Details

Ask Latest Price & Details

DIGITAL MULTIMETER

Operating Temperature 0 - 40ºC, 32ºF - 122ºF (<80% RH, <10ºC non-condencing)
Power Source 4.5V
Weight 360g. Approx (Battery Included).
Application With Frequency, Temperature, Voltage, Resistance, Diode & Audible continuity testing.
Display 3¾ Digits, LCD Display . Automatic Indication of functions & symbols
Range Selections Automatic & Manual
Over Range Indication LCD will display "OL"
Low Battery Indication The *±* is displayed when the battery is under the proper operation range.
Polarity Indication *_* displayed automatically
STORAGE TEMPERATURE -10 - 60ºC, 14ºF - 140ºF (<70% RH, battery removed )
Fuse Protection uA and mA , F500 / mA / 250V 5X20, A , F 10A / 250V 6.3X32.
Sample Range 3 times / sec for digital data
Battery Type AAA 1.5V.
Dimensions 185(L) X 87 (W) X53 (H) mm.
SPECIAL FEATURES Secondary Injection Moulded Case, VAC, VDC, mVDC, ohms, Capacitance, Frequency (upto 100kHz), AC / DC amps, AC / DC milliamps, AC / DC micro-amps, Temperature ( -50*C - 100*C ), Relative mode, DATA Hold

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Mr. Rajesh Sharma (Cambridge Instruments & Engineering Co.)
55 Ezra Street, 4th Floor, Kolkata - 700001, West bengal, India
Share us via
Found Something Wrong with this Listing? Report Here.

View Contact No.