Other Products / Services #1750811

Portable spill kit for chemical universal only: make: enpac absorbs up to 8.8 gallons handle all types of spills with this portable kit. This handy kit features a compact design that easily fits behind the seat of a truck for quick response. Ideal for the smaller types of spills that truckers encounter on a regular basis. Hazmat version. Kit contents: 20 nos 15 x 19 pads 3 x 4 socks disposal bag & tie - pair nitril gloves1 pair safety goggles

Fire Resistant Test should be minimum for 15 Minutes & up to 90 Minutes

Test will be carried out by an Independent European Laboratories

Cabinets should have Inlet & Outlet Ventilation with Thermo Fuse and Thermo expanding seals of the door(s) allow keeping the Internal Body Fire Proof

Insulation between the walls will be either by Thermal Insulation Panel / 20mm thickness of Mineral Fiber Insulation

Safety Glasses and Goggles: Your Guide to Protective Eyewear

Why risk losing precious eyesight when wearing safety glasses or protective goggles can keep your eyes safe for a lifetime of good vision? experts say proper protective eyewear could prevent up to 90 percent of all eye injuries.

OSHA has adopted safety eyewear standards established by the American National Standards Institute (ANSI), a private, non-profit organization that creates quality and safety standards for a wide variety of products.

Where The Mats Should Be Used High Voltage Insulating Rubber Mats is highly recommended for Total safety of workmen from Electrical shocks when working in or around environments like :

• High Voltage Panels
• Substations
• Power Transformer Rooms
• Lift Machine Rooms
• LT & HT Labs
• Near Bus Bars & etc

Specifications

• Material : Elastomer Thermoplastic or Elastomer PVC
• Embossing : Anti-Skid without metallic derivatives
• Standard Width : 1 mtr. Customize upto 2 mtr
• Length : (i) 2 mtr. and maximum upto 20 mtr. For LT (2.0 mm) (ii) 2 mtr. and maximum upto 15 mtr. For HT (2.5 mm & 3.0 mm)
• Mat should be ISI Marked at every meter.
• Mat should be Tested by CPRI for IS : 15652:2006
• Mat should be suitable for both AC & DC electrical Installations.
• Insulating Mat can be pasted at front and rear side of the control panels and other electrical installations as recommended in IS 15652:2006.

Technical Features

• Good mechanical properties to withstand load and movement of breaker. Trolleys and associated electrical equipments
• High Di-electric strength.
• Fire Retardant
• Manufactured without any metallic derivatives.
• Suitable for both A.C. & D.C. electrical Installations
• Easy to install
• Water and moisture proof, does not decay.
• High tensile Strength and elongation Properties
• Insulation resistance up to 100000 mega ohm with 5000 V megger.
• Tested by CPRI (The leading research and test house for Power in India)

Features

• GP Manual Monitor
• Rated flow up to 1000 gpm (3800 lpm)
• Rotation Continuous 360
• Elevation +90 to -45
• Cast-in turning vanes & integrated removable stream shaper for maximum reach and stream performance
• Built in pressure gauge
• ''T'' handle manual control provides precise, easy positioning and control
• Compact, efficient design requires minimum mounting space Nozzle

Options

• Style 487 GP Smooth Bore Tip 1 1/4'', 1 3/8'', 1 1/2''
• Style 489 Smooth Bore Tip 1 3/4'', 2''
• Style 4445 & Style 4447 Nozzles
• Style 5147 Adjustable Flow
• Style 5150 Automatic
• Style 1545 SaberMaster
• 2420 Triple Stacked Tips Foam Nozzle Options
• Style 4445 & Style 4447 Fog Nozzle with 3621 Foam Tubes
• Style 4475 Akrofoam
• Style 3625 Foam Tube
• Style 3626 Foam tube with Dispersion Jaws

SPECIFICATION ENPAC 4 DRUM SPILL CONTAINMENT PALLETMOC Virgin HDPE materialCOLOUR YellowFORKLIFTABLE YesWEIGHT OF THE PALLET 41 KGSPILL CAPACITY 249.8 LtrsRegulations EPA 40CFR 264.175, SPCC, NPDES & UFCDimension (cm) 137 x 137 x 28.6Remarks Made of Virgin Hdpe MaterialOven tested at 60 degree centigrade for 6 hoursUser friendly for extreme conditionsAs per EPA, SPCC, NPDES , CFR 40 regulationsLoad bearing capacity -2721.5KgValue for money Performance We Keep the material in an oven for 6 hours at 60 degree centigrade to test the performance of the product . The product is best suitable for both indoor and outdoor application No testing is done

• Drum or barrel mounted lever action Stainless Steel piston pump
• Ideal for aggressive chemicals that are compatible with Teflon & S.S. materials
• Comes with 2 and 1-1/2 NPT Bung
• 2- piece Steel telescoping suction tube to accommodate different drum and barrel

• Wall Mounted Pump for Flexible Suction Length & Discharge
• MOC: SS 316 & Teflon
• Pump Inlet: 52 MM, Pump Outlet: " Serrated Nozzle
• Discharge Pressure: 1:1 (Discharge Pressure will be equal to Supply Air Pressure)
• Pump comes to stand still if any case discharge valve is closed.
• There is no damage for any part if the Pump RUNS DRY.
• You can easily shut off the pump by just shut down the discharge valve At Operation Area.

• Using compressed air, two way drum pump offers both safe and powerful vacuuming of fluids, as well as instant pump out capability. The drum can be emptied with a turn of a knob, eliminating the need for dumping.
• Two Way Drum Pump is suitable for use with most nonflammable Liquids.
• Installs on 210 drum in less than a minute, Pulls liquids up to 90 LPM
• Turn of Knob changes filling mode to empty mode in seconds
• Two Way Drum Pump is truly a versatile, plant maintenance tool for fast cleaning and pump in / pump out handling of Coolant sumps, even with chips, Tramp oil, Sludge and waste water from parts washers, Hydraulic oil, Solvents, Liquid spills and much more

• Suitable for Electric Transporting Drums , Loading Unloading On Pallets
• Automatic Gator Grip, Suitable with Steel & HDPE Rimmed Drums
• Single-stage vertical-lift drum Stacker allow you to stacker a drum up
• Mainly used for chemical plants and food plants for transferring, loading & unloading and compounding materials of fluids, such as dyes, paintings, adhesives, petrol and edible oils, etc.
• Suitable for Steel Drum & HDPE/Plastic Drum
• Loading Capacity : 300 kgs
• Lifting Height : 1100 mm
• Lifting Speed : 80 mm/second

• Manual Lift with Manual Drum Rotor 1800
• With Scale, which Can control Pouring & Measure Capabilities accuracy : + 3%
• It has a rim clamp that can securely grasp the top lip of the drum.
• The design is simple, one person can operate easily.

• 4- Wheeler barrel trolley for best control, more safety, easy to operate.
• For lifting, shifting of all 210 liters Plastic & M.S. drum handling needs.
• Multi-functional drum truck allows you to move drums on four wheels and acts as a drum cradle for storage and dispensing.
• White virgin rollers allow for easy faucet positioning of drums.
• Dully power coated & ready for use.
• Wheels Option: Polyurethane (P.U) wheels, White virgin wheels
• MOC Option: M.S. Powder Coated or S.S. Material

• For easy lifting, shifting and transporting of all 210 litres plastic & M.S. drums.
• Zero maintainence, easy to operate.
• One man can handles all.
• Product is Dully power coated with anti corrosive Treatment
• Wheels Option: Polyurethane (P.U) wheels, Pneumatic Wheels, White virgin wheels
• MOC Option: M.S. Powder Coated or S.S. Material

• The Hydraulic Drum Lifter handles drums up to 22-1/2" in dia.
• Lift height is 12-1/2" to the bottom of a standard 34-1/2"H Steel Drum
• 11.25" Llift height- with 300 Kgs capacity
• Two rigid and one swivel-locking caster for easy maneuverability.
• Caster lock helps prevent accidental rolling.
• Pallet truck-type pump handle takes the effort out of lifting drum

ESD safe clothing is made using Fabric consisting of 96% Polyester and 4% conductive fibers can be supplied in many different forms such as knee length coats, aprons, caps, pants, booties and bunny suits. The fabric is compatible in cleanrooms as well. The apparel is stitched together using a conductive silver impergnated thread to ensure lifelong conductivity. The apparel is stitched in standard sizes-Small S, Medium M, Large L and Extra Large XL sizes. The garments can also be stitched as per customer specifications incorporating pockets, logos and other features to suit different requirements of the operators.

TYVEK is air and water vapour permeable, yet repels water-based liquids and aerosols. It acts as an excellent barrier against particles and fibres. It is low-linting and also antistatically treated.Therefore it also helps to prevent human contamination of products and processes in clean-room environments.

Application

• Agrochemical handling
• Asbestos
• Automotive industry
• Chemical industry
• Cleanroom applications
• Contaminated land clean-up
• Electronics
• Emergency response services
• Food processing
• Decontamination of contaminated land and work sites
• Disease management
• Disposal of hazardous materials
• Industrial cleaning and maintenance
• Medical applications and exposure to biological hazards
• Nuclear industry
• Pharmaceuticals

• Made for general
• Protective use in high temperature Environments
• Boiler suits are manufactured in two main types: heat resistant and heat and electric arc resistant.

We are the main supplier of this product.

Nomex Fire Fighting Suit Consisting Of Jacket, Trouser with Pab Helmet & Knitted Hood, Fire Fighting Hand Gloves, Fireman Boot.

Nomex 111 A , Fire Fighter Jacket & Trouser Certified To EN 469 Standard

Nomex Three Layer Suits:-

• Standard: CE EN469 approved
• Outer fabric: Nomex IIIA. 200g/square meters
• Moisture Layer: 50% Nomex/50% viscose coated PTFE membrane.
• Thermal layer Carbon felt laminate with 50% Nomex 50% viscose comfortable face cloth.

Specification :

• Double close front, Velcro fixing device and safety zipper.
• Throat safeguard design adjust by Velcro fixing device
• Double supper large pocket on the frock and pants, one radio pocixets on the chest and a Concealed paper pocket between double close fronts.
• Cuff can be adjusted by Velcro and with fireproof, waterproof and thumb ring design.
• Extra patches shall be placed to the bottom of jacket's arms to increase the movement capacity.
• The reflector bands shall be sewed as rounded to the cuffs, foot, chest and the back parts of the jackets.
• Waist of the trouser shall be higher at least 30 cm than jacket's foot.
• Elastic girdle and Elastic suspenders shall be easily opening-locking and adjustable clips.
• The sewing thread shall be fire proof thread.

Fire Fighting Hand Gloves:-

• Outer Shell : Heat Resistant Fr Leather
• Second Layer : Aramid Knit Fabric
• Lining : Membrane
• Thermal Final Layer : Fr Fleece Fabric
• Retro Reflective Trim On Back Side
• Approval To EN 659 & EN 388

Fire Fighter Anti Flash Hood:-

• Nomex ( Aramid ) Knitted Fabric
• Approval To EN 13911

Fire Fighting Boot:-

Fire Fighter Boot Certified To EN ISO 15090 Standard

Pioneer reflectors with clamp Their high reflection gives the drivers an extra time to tPSe evasive action. Reflectors are fixed with base plate in a special manner to protect the inner surface from dust, water & humidity which enhances life of the reflectors.

Pioneer Wheel Stopper made from Plastic for Parking Solutions.

Dimension

• (L)500mm x (H)160mm x (W)150mm

Professional anti theft heavy duty Wheel Clamp Lock. Made of Heavy gauge hardness Steel for maximum Can be adjusted to fit 7 to 11 inches Width tires. Anti - technology open. It is difficult to open without special tools or keys.

Dimension

• 490mm x 240mm x 70mm
• Weight : 2760Grams (Appx)

250 KG LOAD FALL ARRESTER IN CABLE - 10 M

• Load fall arrester in galvanized cable 4 mm to secure all moving loads under 250 kg. High resistance ABS case
• This item is not a P.P.E. It complies with Machinery Directive, and it can absolutely not be used for the persons protection
• Cable : galvanized steel
• Casing: ABS
• High resistance ABS case
• AN517 - AN518
• Inertia locking system
• Integrated energy absorber
• 2 integrated carrying handles
• Intensive use

CABLE SELF-RETRACTABLE FALL ARRESTER WITH WINCH + 1 AM020 - 30 M

• Self retracting fall arrest in steel cable with removable rescue hoist. Steel housing. Inertia locking system. Energy dissipater
• Cable : steel
• Casing: steel
• Winch : steel
• Connector : light alloy

We are the main supplier of this product.

Scott Safety have over 75 years experience in the design and manufacture of Respiratory Protection Equipment. Approved to EN137:2006 Type 2, the Scott Sigma 2 Type 2 Self Contained Breathing Apparatus combines the highest level of respiratory protection in a simple to operate, cost effective piece of equipment that meets the needs of Industrial and Marine firefighters.

Sigma 2 Type 2s proven durability, reliability and appeal is confirmed by an extensive user base who demand a combination of maximum performance and true operational simplicity.

• Proven high performance pneumatic system
• Compact first breath activated demand valve with bypass
• Ergonomically designed lightweight backplate and type 2 harness
• Kevlar blend flame retardant webbing with Kevlar cylinder band
• Wide choice of facemasks from the Vision 3, Promask PP and Panaseal ranges
• Corrosion resistant Nickel plated components
• Simple operation for users
• All components are user serviceable, low cost and easy to maintain
• Will accept wide range of 200 and 300 bar cylinders

The Spirit SX powered air purifying respiratory protection system provides a choice of the most advanced electronically controlled and maintained power units which are programmable to meet the precise needs of both the user and their application. The Spirit SX powered air purifying respirator (PAPR) system provides adaptability and controllability, enabling users to achieve a new level of precision in meeting their comfort and performance needs.

• Adjustable flow with particle filters from 170 l/min to 220 l/min
• Automatic diagnostic check at start-up
• Large TFT colour display of operating status
• Suite of alert, warning and alarm notifications
• Prevents use with two filters of different types
• Prevents use with combination filters if they are not securely fitted
• Automatic recognition of filter type in use
• Automatic recognition of headtop or mask in use
• Filter thread areas protected from contamination and ingres
• Locking filters
• The motor is guaranteed for 3 years or 1800 hours run time.