Other Products / Services #574425

we are manufacturing graphite wiper blades for thin film evaporators. our material is non-reactive to the chemical being refined & can operate at very high temperatures (around 2000 degree celsius) in inert environment. the quality of material enhances the life of the equipment & gives consistent performance preventing breakdown.

The Carbon Wiper Blade manufactured by us have a unique combination of physical and chemical properties, which makes them most suitable for fast production WFEs. The blades are available in different sizes and specifications and have good mechanical and sliding properties. Wiped filmed evaporators are designed to spread a thin layer or film of liquid on one side of a metallic wall, with heat supplied to the other side. The unique feature of this equipment is not the thin film itself, but rather the mechanical wiping device for producing and agitating the film. This mechanical concept permits the processing of high-viscosity liquids, liquids with suspended solids, or situations requiring liquid rates too small to keep the thermal surface of a falling film evaporator uniformly wet. It is widely used in dairy, pharmaceuticals, petrochemicals, food industries etc. where high sensitivity & optimum temperature control is essential along with removal of volatile components from non volatile material. It is used for preservation of permissible commodities & herbal products for long time duration with keeping their natural composition unchanged. Features

• Inert Material (Non-reacting to Feed Material)
• Temperature resistance up to 1500oC.
• Up to 500mm long wipers.
• Best lubricating and sliding properties to prevent wear of evaporators cylinder.
• Prompt deliveries any quantity.

We are manufacturers of Graphite Blocks for Kiln Inlet & outlet Seals, used in Cement Plant. Our products are high quality with more strength & lubrication for better life & good performance.

We have come up with the finest range of Mechanical Carbon Seals. These Mechanical Carbon Seals are used in various industrial applications and are fabricated as per the international standards. Our Mechanical Carbon Seals are known for accurate dimensions and are properly tested under strict industry norms.

Features

• Controlled hardness
• Excellent resistance
• Fine finish
• Longer service life

We present an exclusive range of Graphite Molds. Our Graphite Molds are manufactured as per the industry standards to give best results. We provide wide variety of graphite grades combining properties like hardness, resistivity and flexural strength for this application. Our complete machined molds are made as per the customer specifications. We offer our Graphite Molds at economical prices.

Known For

• Excellent hardness
• Good resistivity
• Optimum flexural strength

Used In Manufacturing

• Diamond tools used in stone cutting industry

Basic Design of Graphite Moulds for Pressure Sintering The article to be sintered is simultaneously heated and subjected to pressure (F) in a graphite Mould. Heating can be arranged by direct passage of current or by induction. The Filing Space (5) is formed between the mould (4) and the plungers (3) and can be varied in form and volume. The water cooled brass contacts(1) reduce heat transference to other equipment. The graphite contacts(2) act as conductors for electric current and at the same time exert pressure on the plungers (3). Resistance Heating

• Through The Plungers : The plungers are in the electric circuit. The temperature over 1000^oC it is desirable to heat through the mould to achieve an even flow of current and heat. This avoids difficulties with conduction through plunger and mould, which can sometimes have a negative one-sided current flow, especially if a non-conductive component is being sintered.
• Through The Mould : In this case the mould is in the electric circuit and heat builds up in this and is conducted to the component being sintered.

We are eminent Manufacturer, Exporter and Supplier of Fiber Vanes for High Temperature Vacuum Pumps. The Fiber Vanes offered by us are made up of the next generation polymer compounds that make them ideal for vacuum pumps, working with high temperature fluids. Furthermore, the Profile & Grooves of the Vanes are machined with precision to have accurate fit in the rotors. Staffed with the diligent team members; we ensure that our Fiber Vanes comply with globally accepted standards and norms.

We are Manufacturer, Exporter and Supplier of Fiber Vanes for Oil Type Vacuum Pump. We offer the best and qualitative Fiber Vanes for Oil Type Vacuum Pump that is manufactured in the advanced production unit and that too with the use of newest technology. Further, we use both Cotton Fiber & Glass Fiber reinforced material for manufacturing these Vanes. The choice of material depends on the working temperature of the fluids in the Vacuum Pump. The profile & Grooves of the Vanes are machined with precision to have accurate fit in the rotors. Backed with the diligent team members and management, they ensure that the Fiber Vanes for Oil Type Vacuum Pump commensurate to global standards.

We have come up with the finest range of Graphite Dies. A metallurgical process of continuous casting allows continuous control of the transformation from a liquid metal to a solid state. This process results in the obtaining of semi-finished products. Our Graphite Dies are manufactured with the use of modern technology and have accurate dimensions.

The continuous casting of non-ferrous and precious metals & the casting of gray iron represent an extensively used manufacturing method. This technique offers the benefit of non-stop production and ensures best possible material quality as a result of rapid solidification. Two very helpful characteristics are the uniformity of product structure and absence of shrinkholes. As the resulting cast metal surfaces are generally unblemished and smooth, extensive finishing is not typically needed.

Type Of Products Obtained

• Wires
• Rods
• Tubes
• Strips
• Custom sections

The graphite die used in this transformation, allows

• The shaping of the metal
• The heat extraction important to transform the metal from liquid to solid state

Distinction Possible Between

• Vertical casting
• Vertical casting, furnace-dependent
• Horizontal continuous casting
• Vertical casting, not furnace-dependent

The design of the casting process and the casting equipment are similar in all cases. A significant component of the continuous casting machine is the cooling device, which has a water-cooled jacket and a mold (die). Graphite combines a number of favorable properties and is preferably used as a mold (die) material.

We manufacture Carbon Vanes for Dry Running Vacuum Pumps. Our material is high strength which gives better life & performance.

Manufacturer, Exporter and Supplier of Vacuum Pump Graphite Vane. we are one of the reliable names in this domain. Perfectly designed and manufactured under the vigil supervision of veterans and experts. we have state of the art designing and production unit. Staffed with adroit team members and management; they ensure that the Vacuum Pump Graphite Vane commensurate to the international standards. Our Graphite Vanes are widely reckoned for their perfect finish, strong construction and cost effective prices. Further, we test them for ensuring zero defect quality prior to final dispatch.

Features:

• Self lubricating properties.
• Low specific density.
• Non reactive.
• Best Suited For.
• Dry & wet rotary pumps.
• Compressors and vane type vacuum pumps.

We are listed amidst the most celebrated Manufacturers, Exporters and Suppliers of Vacuum Pump Carbon Vane. The offered Vacuum Pump Carbon Vane is manufactured in the advanced production unit and that too with the use of newest technology and sophisticated machines. High grade, fine finish and reasonable prices are few key traits of our Carbon Vanes. Backed with the diligent and industrious team members; they ensure that the Vacuum Pump Carbon Vane is free from any type of faults or defects.

Features:

• Self lubricating properties
• Low specific density
• Non reactive

Best Suited For:

• Dry & wet rotary pumps
• Compressors and vane type vacuum pumps

We bring to our clients, a wide spectrum of Graphite Crucibles. These Graphite Crucibles are made out of fine quality, ultra fine grain graphite blocks with precision dimension control. Our Graphite Crucibles are well tested under stringent industry parameters and are offered at affordable prices.

Best Suited for

• Melting and casting of precious metals in Jewelry manufacturing industry
• Melting various precious metals such as Gold & Silver

Manufactured for the following machines

• Nutech
• Yasui
• Galloni
• Schultheiss
• Indutherm

Features

• Resistant to heat
• Enhanced efficiency
• Maximum resistance to oxidation
• Corrosion resistance
• Non reactive properties

we are manufacturing graphite rings used in high temperature sealing & rotory joints.

We offer to our clients Graphite Vanes that are appreciated for their perfect finish. Our Graphite Vanes are made using high quality material. These Graphite Vanes are well tested under stringent industry norms to make sure that the final products are free from any type of faults or defects.

Features

• Self lubricating properties
• Low specific density
• Non reactive

Best Suited For

• Dry & wet rotary pumps
• Compressors and vane type vacuum pumps

We bring forth the finest quality Graphite Seals. These Graphite Seals are manufactured with the use of high grade graphite and are highly durable. These Graphite Seals are resistant to early wear and are useful in various industries. Our Graphite Seals are well tested under strict norms and are available at economical prices.

Used In Industries Like

• Cement
• Textile
• Glass
• Sugar mills
• Furnaces
• Paper Mills
• Copper
• Aluminum
• Ferrous extrusion Industry