Cascade Material Handling Pvt Ltd

Paud Road, Pune, Maharashtra

Achieve all the benefits of handling unitized loads in your manufacturing and distribution operation with Cascades J-Series Carton Clamps. Allowing efficient handling of a wide range of low, medium and high-density products including consumer paper products, appliances, consumer electronics, wine, packaged foods (canned or boxed), chemicals and plastics. Features Industry-leading visibility. Efficient hydraulic system which minimizes energy consumption and maximizes performance. Clamp and backhand protection. Flow divider for equal arm movement. Top-mounted hydraulic cartridges and test port for ease of access and adjustment. Sideshift circuit relief optimizes sideshift speed and performance. Rugged design for optimal strength, durability and performance. High strength steel frame. Lubrication-free, full length UHMW bearings. High strength steel castings. Maximum clamp force for secure handling. Efficient arm design. Thin arm profile for manipulating tight loads between stacks. Rubber-faced aluminum contact pads for secure handling of loads. Designed for convenience and performance. Integrated true centering key for precise and secure installation. Available in two pressure offerings to match attachment to truck hydraulic system.

Designed for handling large case loads in a variety of industries. The Razorback features thin, non-articulating arms for knifing between loads in trailers and containers. Features Industry-leading visibility. Efficient hydraulic system which minimizes energy consumption and maximizes performance. Layered razorback arm design provides flex with thin profile. Clamp and backhand protection. Flow divider for equal arm movement. Top-mounted hydraulic cartridges and test port for ease of access and adjustment. Sideshift circuit relief optimizes sideshift speed and performance. Rugged design for optimal strength, durability and performance. High strength steel frame. Lubrication-free, full length UHMW bearings. High strength steel castings. Maximum clamp force for secure handling. Efficient arm design. Thin arm profile for manipulating tight loads between stacks. Rubber-faced aluminum contact pads for secure handling of loads. Designed for convenience and performance. Integrated true centering key for precise and secure installation. Available in two pressure offerings to match attachment to truck hydraulic system.

Designed for magnum and T loaded appliances in trailers. Articulating pads securely hold the load without damage. The sideshifting feature allows the operator to easily maneuver the product being handled. Features Industry-leading visibility. Efficient hydraulic system which minimizes energy consumption and maximizes performance. Clamp and backhand protection. Flow divider for equal arm movement. Top-mounted hydraulic cartridges and test port for ease of access and adjustment. Sideshift circuit relief optimizes sideshift speed and performance. Rugged design for optimal strength, durability and performance. High strength steel frame. Lubrication-free, full length UHMW bearings. High strength steel castings. Maximum clamp force for secure handling. Cushion stop tipping cylinders for smooth operation. Thin arm profile for manipulating tight loads between stacks. Rubber-faced aluminum contact pads for secure handling of loads. Designed for convenience and performance. Integrated true centering key for precise and secure installation. Solenoid adaption group included to allow an existing truck auxiliary function to control the tipping feature of the clamp. Available in two pressure offerings to match attachment to truck hydraulic system.

Achieve all the benefits of handling wider loads in your manufacturing and distribution operation with Cascades J-Series Double Wide Carton Clamps. Allowing efficient handling of a wide range of low-, medium- and high density products including consumer paper products, appliances, consumer electronics, wine, packaged foods (canned or boxed), chemicals and plastics. Features Industry-leading visibility. Efficient hydraulic system which minimizes energy consumption and maximizes performance. Clamp and backhand protection. Flow divider for equal arm movement. Top-mounted hydraulic cartridges and test port for ease of access and adjustment. Sideshift circuit relief optimizes sideshift speed and performance. Rugged design for optimal strength, durability and performance. High strength steel frame. Lubrication-free, full length UHMW bearings. High strength steel castings. Maximum clamp force for secure handling. Efficient arm design. Thin arm profile for manipulating tight loads between stacks. Rubber-faced aluminum contact pads for secure handling of loads. Designed for convenience and performance. Integrated true centering key for precise and secure installation. Available in two pressure offerings to match attachment to truck hydraulic system.

Cascade Bale clamps can efficiently and economically handle nearly any type of baled product including cotton, flax, wool, synthetic textile fibres, hay, rags and recycled clothing. Features Industry-leading visibility. Efficient hydraulic system which minimizes energy consumption and maximizes performance. Clamp and backhand protection. Flow divider for equal arm movement. Top-mounted hydraulic cartridges and test port for ease of access and adjustment. Sideshift circuit relief optimizes sideshift speed and performance. Rugged design for optimal strength, durability and performance. Center mounted hardened replaceable frame wear segment (except for revolving models). High strength steel frame. Lubrication-free, full length UHMW bearings. High strength steel castings. Maximum clamp force for secure handling. Designed for convenience and performance. Integrated true centering key for precise and secure installation. Available in two pressure offerings to match attachment to truck hydraulic system. UNIQUE ARM FEATURES Integral welded corner casting for added strength. OR Bolt-on arm offering added for flexibility. Standard 3 rib facing with elliptical cutouts for optimal load engagement.

Designed primarily for the textile industry, Cascade Bar Arm Attachments are used for handling rolls of cloth material such as towels, linens and denim. Features Industry-leading visibility. Efficient hydraulic system which minimizes energy consumption and maximizes performance. Clamp and backhand protection. Flow divider for equal arm movement. Top-mounted hydraulic cartridges and test port for ease of access and adjustment. Sideshift circuit relief optimizes sideshift speed and performance. Rugged design for optimal strength, durability and performance. Center mounted hardened replaceable frame wear segment. (Except for revolving models). High strength steel frame. Lubrication-free, full length UHMW bearings. Maximum clamp force for secure handling. Designed for convenience and performance. Integrated true centering key for precise and secure installation Available in two pressure offerings to match attachment to truck hydraulic system. UNIQUE ARM FEATURE Heavy-duty rounded end bars minimizes potential for damage. Custom bar arm lengths, diameters and tip configurations. Centered or inset bar arm mounting locations.

Bulk Box Handlers are used to handle produce, piece parts, etc., where a box attached to a pallet requires support of multipurpose arms for rotating and dumping. Features Industry-leading visibility. Efficient hydraulic system which minimizes energy consumption and maximizes performance. Clamp and backhand protection. Flow divider for equal arm movement. Top-mounted hydraulic cartridges and test port for ease of access and adjustment. Sideshift circuit relief optimizes sideshift speed and performance. Rugged design for optimal strength, durability and performance. High strength steel frame. Lubrication-free, full length UHMW bearings. High strength steel castings. Maximum clamp force for secure handling. Designed for convenience and performance. Integrated true centering key for precise and secure installation. Available in two pressure offerings to match attachment to truck hydraulic system. UNIQUE FEATURES Bolt-on forks for ease of change. Forks can be mounted in two positions. 30 " OTO & 25 " OTO. Heavy duty rotator with 360 continuous rotation. Regenerative hydraulic valve is standard and offers. optimal arm speed.

Drum clamps are widely used in the petroleum and chemical industries and in other applications that require the handling of standard 55-gallon drums. Drum clamps can also help improve productivity by handling up to four drums per load. Features Industry-leading visibility. Efficient hydraulic system which minimizes energy consumption and maximizes performance. Clamp and backhand protection. Flow divider for equal arm movement. Top-mounted hydraulic cartridges and test port for ease of access and adjustment. Sideshift circuit relief optimizes sideshift speed and performance. Rugged design for optimal strength, durability and performance. Center mounted hardened replaceable frame wear segment (except for revolving models). High strength steel frame. Lubrication-free, full length UHMW bearings. Maximum clamp force for secure handling. Designed for convenience and performance. Integrated true centering key for precise and secure installation. Available in two pressure offerings to match attachment to truck hydraulic system. UNIQUE ARM FEATURES Replaceable rubber faced arm pads. Pivoting arm design for 4 arm design.

For handling large blocks of foam rubber or other light weight volume products like insulation materials. The high visibility tubular arms are strong but smooth to avoid product damage. Features Industry-leading visibility. Efficient hydraulic system which minimizes energy consumption and maximizes performance. Clamp and backhand protection. Flow divider for equal arm movement. Top-mounted hydraulic cartridges and test port for ease of access and adjustment. Sideshift circuit relief optimizes sideshift speed and performance. Rugged design for optimal strength, durability and performance. Center mounted hardened replaceable frame wear segment. High strength steel frame. Lubrication-free, full length UHMW bearings. High strength steel castings. Maximum clamp force for secure handling. Designed for convenience and performance. Integrated true centering key for precise and secure installation. Available in two pressure offerings to match attachment to truck hydraulic system. UNIQUE ARM FEATURES Arms are fabricated from special thick walled tubing for reliable, rigid operation.

Operate both as a clamp and a fork positioner. Awkward loads, such as crates, bales & tires can be clamped between the forks. The ability to position the forks speeds pallet handling and reduces wear and tear on the pallets Features Industry-leading visibility. Efficient hydraulic system which minimizes energy consumption and maximizes performance. Clamp and backhand protection. Flow divider for equal arm movement. Top-mounted hydraulic cartridges and test port for ease of access and adjustment. Sideshift circuit relief optimizes sideshift speed and performance. Rugged design for optimal strength, durability and performance. Center mounted hardened replaceable frame wear segment. (Except for revolving models). High strength steel frame. Lubrication-free, full length UHMW bearings. Maximum clamp force for secure handling. Designed for convenience and performance. Integrated true centering key for precise and secure installation Available in two pressure offerings to match attachment to truck hydraulic system. Unique Arm Feature: Bolt-on pallet fork arms.

Multi-Purpose Clamps efficiently and economically handle many types of corrugated, metal and wooden containers as well as baled product. Substantially reduce or completely eliminate the need for pallets and the associated cost of pallet purchase or rental, maintenance, disposal and storage. Build loads to order, or skim partial loads with the Cascade Multi-Purpose clamp. Features Industry-leading visibility. Efficient hydraulic system which minimizes energy consumption and maximizes performance. Clamp and backhand protection. Flow divider for equal arm movement. Top-mounted hydraulic cartridges and test port for ease of access and adjustment. Sideshift circuit relief optimizes sideshift speed and performance. Rugged design for optimal strength, durability and performance. Center mounted hardened replaceable frame wear segment. (Except for revolving models). High strength steel frame. Lubrication-free, full length UHMW bearings. High strength steel castings. Maximum clamp force for secure handling. Designed for convenience and performance. Integrated true centering key for precise and secure installation. Available in two pressure offerings to match attachment to truck hydraulic system. UNIQUE ARM FEATURES Integral welded arm casting for added strength. OR Bolt-on arm offering for added flexibility. Ribbed rubber faced contact pads for secure load handling.

For high-volume, damage free and secure handling of pulp bales and unitized pulp in stevedoring, mill, warehousing, shipboard and transporting operations. Features Industry-leading visibility. Efficient hydraulic system which minimizes energy consumption and maximizes performance. Clamp and backhand protection. Flow divider for equal arm movement. Top-mounted hydraulic cartridges and test port for ease of access and adjustment. Sideshift circuit relief optimizes sideshift speed and performance. Rugged design for optimal strength, durability and performance. Center mounted hardened replaceable frame wear segment. (Except for revolving models). High strength steel frame. Lubrication-free, full length UHMW bearings. High strength steel castings. Maximum clamp force for secure handling. Designed for convenience and performance. Integrated true centering key for precise and secure installation. Available in two pressure offerings to match attachment to truck hydraulic system. UNIQUE ARM FEATURES Integral welded corner casting for added strength. OR Bolt-on arm offering added for flexibility. Standard 3 rib facing with elliptical cutouts for optimal load engagement.

Rugged and durable clamps built to excel in recycling harsh applications. Designed with full length alloy steel wear bars, full width UHMW bearings and Frame bumpers to protect cylinders these recycling clamps withstand the most demanding applications. Industry-leading visibility. Efficient hydraulic system which minimizes energy consumption and maximizes performance. Clamp and backhand protection. Flow divider for equal arm movement. Top-mounted hydraulic cartridges and test port for ease of access and adjustment. Sideshift circuit relief optimizes sideshift speed and performance. Rugged design for optimal strength, durability and performance. High strength steel frame. Lubrication-free, full length UHMW bearings. High strength steel castings. Maximum clamp force for secure handling. Designed for convenience and performance. Integrated true centering key for precise and secure installation. Available in two pressure offerings to match attachment to truck hydraulic system. UNIQUE FEATURES Integral arm casting for added strength. Hardened steel full width wear bars protects frame from wear when scraping on the ground. Bumper/Cylinder cover. Full length wear tile under arms protects arms and allows better sweeping capabilities. Valve guard protects hydraulics located behind frame from impact and debris. Cylinders with metallic wiper rings to prevent foreign material entering the cylinder.

Cascades TURNAFORK is used in a variety of manufacturing, receiving, warehousing and shipping environments that require both clamp handling and pallet handling. Rotate the arms to the vertical position for clamping, or to the horizontal position to handle most types of conventional pallets. Order picking layers of varied product onto a pallet is simplified. In addition to clamp handling of cartons, the versatile TURNAFORK is also used for clamping awkward or difficult loads such as large tires.

A dual purpose attachment for both clamp and pallet handling. Useful in shipping, receiving and order picking operations requiring both palletless handling of boxes, crates and cartons, as well as palletized loads and scrap bales.

Handles single or dual concrete cubes safely and efficiently using a variety of fork lengths and spacing to fit any cube handling application. Single sideshifting models allow accurate positioning on single unit loads. Dual independent sideshifting models offer accurate fork positioning and greater stability, so operators can pick dual cubes separately, then sideshift them together for stable transportation. Features Utilizes our proven high-visibility sideshifters, which are no-weld mounted, allowing for easy re-positioning Over-center sideshift standard for easy truck loading Heavy-duty structural frame Protected bearing segments with easily accessible grease fittings Heavy-duty cylinders with case-hardened and chromed rods for long life in outdoor operations Self-cleaning cylinder rods Floating-eye forks

Fork positioners allow lift truck operators to move the forks quickly and accurately to fit different pallet sizes without leaving their seats. Features Increase Productivity by moving the forks without getting off of the truck seat and accurately placing the load without additional truck maneuvering. Reduce Damage to pallets and product by ensuring the forks are in the ideal position for the load being handled. Quick and Easy Installation is achieved without welding and the use of a Sequence Valve or RFHC (Radio Frequency Hydraulic Control) permits the use of a single auxiliary valve to control an additional function.

G-Series Rotators give your driver the ability to quickly dump or invert a load, and then immediately return the forks to the pick-up position in one continuous motion. Cascade rotators are widely used in food processing, automotive manufacturing, chemical processing, recycling operations, smelting and casting operations, and general manufacturinganywhere it is necessary to dump bins or tote boxes. Features Rugged ConstructionCascades gear drive box and ring gear design are proven to provide superior durability. Large visibility window gives the driver an excellent view of the fork tips. Center seal locks out contamination. Rotational TorqueGood torque specifications ensure smooth, positive rotation of the load. Many fork bar widths are available to suit a wide variety of applications. Rotators may be ordered with forks or with fork bars only.

Designed to handle a variety of bin sizes without damaging the bin. The Hydraulic Bin Retainer accommodates plastic and wood bins used in the agricultural markets such as handling grapes, apples, pears, potatoes, nuts and seed. The Hydraulic Bin Retainer is also popular with the industrial sector handling steel bins used to transport scrap metal and paper waste. Bins are held securely on the forks, preventing slippage and damage to the bins when rotated. Features Heavy-duty 360 Cascade rotator that rotates in both directions Bin Retainer is fabricated from proven D-Series extrusions Ranges to match a variety of bin sizes Pressure reduction valve to prevent excessive force on bin

Designed for the bottling, brewing, production or warehouse/shipping industries, Cascades new G series Single-Double Pallet Handler is a new and superior product built to help you perform in real working conditions and meet the demanding applications throughout the material handling industry. You can handle a single pallet, or spread the forks hydraulically to lift, carry and sideshift multiple pallets side by side. FEatures Superior visibility through and over the frame for damage free handling at all stacking heights All steel frame for increased overall durability, eliminating flexing Easy access cylinders for quick servicing Bolt-on Interchangeable forks for low service cost Full-length, fully enclosed wrap around UHMW plastic bearings provide maximum strength and full bearing support, greatly reducing wear on bearing surface Dual class II and III mountings, easily field converted Inner forks mounted on a chrome pin for greater inner fork stability Adjustable fork set spread for ability to handle different types of pallets

Specially designed clamping arms mounted on top of carriage fold down on the pipe/poles to secure and prevent load from rolling off or tipping sideways. Features Excellent driver visibility for easy loading and unloading. Can be fitted to a new or existing truck. Available with sideshifting function for added versatility. Capacity ranges from 5, 000 lb to 36, 000 lb.

FEATURES The forged heel is enlarged (bent and upset manufacturing process) for maximum strength. The inside heel area can be ordered with an optional special "concave type " radius that will reduce damage to the edges of the product. Some applications may require our optional elongated tube (floating eye) so that when the load is being set down on an uneven surface, the forks first being relieved of the load can rise. This prevents damage to the product when the forks are withdrawn. Block handling forks can be ordered in any length required and are manufactured with tube, hook, or floating eye mountings. Typical section sizes used for block handling forks are 2 "x 1.5 "(T x W) and 2 "x 2 "(T x W). Special sizes are available upon request.

Bolt-On Forks are attached to the carriage (fork carrier) with bolts instead of hooks or a tube. This design greatly diminishes any movement of the forks when loaded or when the lift truck is in motion. FEATURES Usually the fork is bolted all the way up the upright. In most instances, the bolt-on design reduces deflection in the upright of the fork, thus reducing the overall deflection. The forks can either be bolted on from the front or the back of the carrier. If bolted from the front, the holes will be counter-bored/sunk to alleviate projection of the bolt heads and damaging product. Obtaining the correct bolt-hole pattern for each set of forks is very important. If measuring the pattern on-site, it is important to first identify if the bolt pattern is inch or metric. Attachment make and model information is also helpful. Bolt holes should not be drilled on the outside heel radius. The start of a bolt-hole pattern should begin at a minimum of 6 in. (152.4mm) above the top of the blade.

For use in highly sanitary applications such as the food and beverage industry.

These forks fold up to enable lift trucks to manoeuver in areas where movement is restricted, i.e. elevators. FEATURES Folding Forks consist of a blade, shank, pin and either a hook or shaft mount attachment. There is a chain attached to a pin that wraps around the blade. The chain locks into a pin retainer to ensure the blade is held in the vertical position. There are many variables to be considered when ordering a Folding Fork assembly, contact Cascade Fork Engineering.

Forged heel, square heel, single taper, double taper, with or without Peek-A-Boo backs. FEATURES A two-stage taper factored into the blade design. A shorter but more durable slim tip for easy entry into the stack. 10% of the blade near the inside of the heel is at full thickness, providing increased rigidity. 20% from the tip of the fork is 50% of the full thickness of the blade, thus reducing fork deflection. The top of the blade can be polished to reduce friction when engaging a load.

Forks for hazardous locations and atmospheres. FEATURES The most popular Spark Retardant Fork is covered in ASTM B36 alloy 6 brass that is 0.125 " thick (except rear of upright and hooks) and brazed 100% along all seams. Stainless steel clad forks are also available for the food industry though these are not spark retardant.

Cascade Weigh Forks, or forklift scales, let you weigh your product as you move it. The wireless display uses Bluetooth so you can view and track the weight of individual loads, total weight of multiple loads and number of units within a load. Features Quick installation and set up Digital calibration for fast and easy adjustments Interchangeable rechargeable batteries for each fork Bright backlit LCD driver display with rechargeable batteries Manual and automatic zero correction Gross/net weighing Displays both kg and lb units Automatic push button tare Automatic low voltage shut off Manual tare entry totaling with sequence number 5-digit ID code entry Piece counting by sampling or manual piece weight entry Error indicator Internal clock Compatible with load backrests

Push/Pulls and Cascade-Kooi Rollerforks are two great ways to manage diverse inventory, including a wide range of palletless loads, easily. When you combine them, you get the ultimate attachment for versatile materials handling. FEATURES Flexible applications: compatible with both slip sheets and pallets, as well as boxes, cartons, and bagged goods. No hydraulic connections for fast installation and removal. No pantograph or face plate for excellent visibility over Push-Pulls. Ideal for handling single-stacked loads. ISO ITA Class II or III mounting as standard for quick installation.

The Cascade Layer Picker handles single or multiple layers of canned & bottled products and increases the speed of pallet production from 1250 cases/hour compared to 250 cases/hour manually. Beverage warehouses and distribution facilities benefit from its speed and versatility.

Cascade provides a rugged line of integral carriages that provide significant gains in net capacity due to reduced effective thickness. Sideshifter, fork positioner and sideshifting fork positioner available.

With a Double Sideshifter you can use your lift truck to move two pallets of product side-by-side instead of one pallet. The Cascade Double Sideshifter gives your driver the ability to pick loads that are separated, bring them together, sideshift both loads and spread the loads.

Whether loading, transporting, storing or staging products, Cascades Multiple Load Handlers with the RapidSync option move even faster, allowing you to get even more product out the door quicker. Open and close cycle times are up to 45%* faster than a competitive model and 27% faster than our other models. With Cascade RapidSync you 'll never have to "re-set " your forks. Our patented technology ensures that the forks move precisely where they should be and remain that way. perfectly syncronized.(*45% faster than similarly sized competitive model when tested at a flow rate of 7 GPM in the Cascade lab).

Multiple Load Handler Magnetic D-Bumpers protect surfaces subject to scratching or wear, including powder-coated metal surfaces, anodized aluminum, glass or wood products. Built in pallet protectors at the bottom of the bumpers form a stop block which prevents pallet damage caused by the radius of the fork. Features Easy to install or remove in seconds without any tools. Sticks securely to multiple load handler fork shanks. Stabilizer pins align with existing fork bolts for increased hold. 30-35 durometer (shore A) black rubber outer layer, a metal inner core and a bottom magnetic layer. Resistant to abrasions, atmospheric agents and oil. Rib design provides additional load cushioning. Lightweight limited effect to truck 's net capacity. Improves noise reduction. The magnetic field generated by the D-Bumpers does not interfere with electronic instruments. Temperature range from -22F to 284F.

The compact, lightweight and versatile 3H Paper Roll Clamp is ideal for handling ultra-light rolls of paper and related packaging materials. Utilizing single-arm geometry and 360 rotation to handle narrow width and small-size rolls, this innovative and unique design is ideally suited for paper converting and packaging, including food packaging where sanitary handling is a mandate. The 3H is available in powered and manual versions with integral or class II carriage mounting configurations, for use on stand-up trucks and powered and manual, walkie-style equipment. The 3H Paper Roll Clamp is built to provide the durability, speed and energy efficiency associated with the H-Series family of paper roll clamps. Features Self-lubricated arm cylinder bushings eliminates the need for grease where sanitary handling is a mandate. Ideally suited for paper and packaging converters where rolls are handled from pallet to unwinding without touching the ground. Cylinders are equipped with internal check valves for added reliability when handling rolls. Versatile design allows handling plastic film, light-weight aluminum, plastic wraps and other related packaging materials, in addition to small paper rolls. Pad alignment system using innovative design insures proper pad alignment on approach to every roll.

Designed for small printers and convertors of fabric, packaging and speciality papers. Lightweight clamp with excellent specifications maximizes capacity on walkie and stand up trucks. Also ideal for handling tires on small lift trucks servicing the aircraft industry. Capacity: 1, 875 - 2, 425 lbs.

Cascades rugged and reliable 13H Paper Roll Clamps have been specifically designed to handle small rolls of newsprint, form and printing stock, making them ideal for newspaper publishers, printers and warehouses. The 13H Paper Roll Clamps feature an expanded roll capacity range and capacity rating allowing you to efficiently handle an even wider variety of roll sizes.

Cascades 18H & 20H Paper Roll Clamps are designed for small printers, newspaper publishers and newsprint warehouses.

Designed for mills, warehouses, printers, newspaper publishers and converters with demanding operations handling kraft, newsprint and coated paper stocks.

The H-Series Roll Clamp was designed with a thinner pad profile to eliminate damage while knifing in between rolls in containers, trailers and rail cars. Excellent visibility through the arms and frame allow for maximum productivity and reduced damage.

Suitable for mills, stevedores and shippers of large rolls of packaging paper of all types. It is also the base clamp for the jumbo tissue roll industry. Features Highly durable arm structure and pad profile that eliminates damage from knifing between rolls in containers, trailers, and rail cars. Pad protectors reduce wear to the contact pads. Pad alignment system using dual spring technology holds the contact pads in proper alignment. A variety of arm styles for flexibility in any application. Short arm positioning to optimize small roll handling. Excellent visibility through arms. High-flow revolving connection provides fast arm speed and longer battery life on electric trucks and less fuel consumption on internal combustion trucks. Quick 360 rotation speed with 15-tooth pinion. High-torque, heavy-duty rotator drivetrain proven to provide superior durability. Can be configured with 2, 3 or 4 pads. High-strength castings provide structural life needed for robust applications.

The 46H and 55H Paper Roll Clamps are designed for operations that handle large, heavy rolls, such as kraft, linerboard, and heavily coated stocks. Suitable for mills, converters, stevedores and shippers of large rolls of packaging paper of all types. Features Highly durable arm structure and pad profile that eliminates damage from knifing between rolls in containers, trailers, and railcars Pad protectors reduce wear to the contact pads Pad alignment system using dual spring technology holds the contact pads in proper alignment A variety of arm styles for flexibility in any application Short arm positioning to optimize small roll handling Excellent visibility through arms High-flow revolving connection provides fast arm speed and less energy consumption Quick 360 rotation speed with 15-tooth pinion High-torque, heavy-duty rotator drivetrain proven to provide superior durability 55H: High-torque, heavy-duty dual rotator drivetrain for fast, continuous rotation Can be configured with 2, 3 or 4 pads High-strength castings provide structural life needed for robust applications

Designed for operations that handle large, heavy rolls, such as kraft, linerboard, and heavily coated stocks, 68H-75H clamps are suitable for mills, converters, stevedores and shippers of large rolls of packaging paper of all types. Available load capacities range from 10, 500 to 16, 500 lbs. (4760-7480 kg) Features Highly durable arm structure and pad profile that eliminates damage from knifing between rolls in containers, trailers, and railcars Pad protectors reduce wear to the contact pads Pad alignment system using dual spring technology holds the contact pads in proper alignment A variety of arm styles for flexibility in any application Short arm positioning to optimize small roll handling Excellent visibility through arms High-flow revolving connection provides fast arm speed and less energy consumption Quick 360 rotation speed with 15-tooth pinion High-torque, heavy-duty rotator drivetrain proven to provide superior durability Can be configured with 2, 3 or 4 pads High-strength castings provide structural life needed for robust applications

Designed for the most demanding concrete pipe and heavy paper roll operations, the 70H-120H Pivot Arm Roll Clamps are designed for lifting extremely heavy loads. The 70H-120H represents a 7-12 ton metric rating and replaces the imperial F model numbers. Features Heavy duty arm & frame structure modeled after proven roll clamp design. Dual rotator drive boxes Heavy duty 220D & 400D rotators depending on model Thin-frame profile increases truck capacity Protected hydraulics Easy to service cylinders in standard sizes Continuous 360 rotation

When arm thickness is an issue, sliding arm clamps offer a narrow arm profile. Features Maximized arm speed by selecting high or low pressure cylinders which correspond to operating pressure of lift truck. Thin arm profile enables damage-free knifing between tightly stacked rolls. Split left hand arm allows handling rolls with up to a 3 " difference in diameter. Full width lip over UHMW bearings provide maximum strength and bearing support. Greatly reduces wear on bearing surface and the need to frequently replace bearings. Hydraulic circuit provides the following: Over-clamping protection Sideshift pressure relief Excellent accessibility for servicing Great visibility. Built-in stand to easily remove and store clamp when not in use.

Designed for mills and stevedores where multiple roll handling improves productivity. The Multi-Roll clamp is application rated and field proven for demanding high-cycle operations, and handles both half and full rolls from 31 " to 63 ". Features High-strength tubular frame construction Hoses routed inside for maximum protection Vertical mounting frames located in front of mast rails for unparalleled visibility High-grip contact pad surfaces for reduced clamp force requirements Split arms to handle different roll diameters concurrently Lube-free pivot bushings provide longer service life Articulating center arm eliminates nip point damage Check valves and cylinders can be serviced without clamp disassembly

Designed for mills and stevedores where multiple roll handling improves productivity, Cascade 's Single & Double Tower Clamps are application rated and field proven for demanding high-cycle operations. These versatile clamps handle from two to eight paper rolls. Features High-strength tubular frame construction Hoses routed inside for maximum protection Vertical mounting frames located in front of mast rails for unparalleled visibility High-grip contact pad surfaces for reduced clamp force requirements Split arms for variations of roll diameters Lube-free pivot bushings provide longer service life Articulating center arm eliminates nip point damage Check valves and cylinders can be serviced without clamp disassembly

These push/pulls are rugged, heavy duty attachments for high cycle slipsheet applications requiring high productivity with low maintenance. The Cascade dedicated push/pulls are the best performing and durable push/pull available. Features High visibility pantograph, gripper jaw and faceplate Full bottom taper/adjustable platens 4 tilting faceplate Chamfered platen corners and gripper jaw design protects the slipsheet High strength, rigid pantograph for safe load packing T-1 steel platens Protected hydraulics Cushion cylinders reduce operating noise Simplified hydraulic circuit Sideshift J-plate is automatically engaged when the push/pull is set on the truck carriage No false carriage is required on quick disconnect models Sideshift feature provides 4 inches (100mm) of sideshift in each direction

The Cascade Mark 55 Push/Pull is the solution for operations that must handle both slipsheeted and palletized product. Hydraulically positionable outer platens are easily opened for conventional slipsheet handling and closed to allow pallet handling. In addition, the Mark 55 Push/Pull allows four-way handling of the popular Mark 55 block pallet. Features Hydraulically adjustable outer platens Sideshifting capability standard Class II mounting standard High visibility pantograph, gripper jaw and faceplate 4 tilting faceplate Protected hydraulics Cushion cylinders to reduct operating noise

Use the Cascade Sheet-Sav Push/Pull to keep your slip sheets in house. This is a popular attachment for manufacturers who handle product on slip sheets within their operation and who transfer product without a slip sheet onto a pallet, into a container, or onto a flatbed truck. Popular for bagged cement, bagged seed and grain, packaged food, dairy products, fruit and produce and corrugated box blank handling. Features High visibility pantograph, gripper jaw and faceplate Adjustable platens 4 tilting faceplate Chamfered platen corners and gripper jaw design protects the slipsheet QFM models: Frame mounts between forks (20 " wide) for minimum effective thickness (lost load) High strength, rigid pantograph for safe load packing Protected hydraulics Cushion cylinders reduce operating noise Simplified hydraulic circuit

QFM (Quick Fork Mount) Push/Pulls are ideal for applications requiring quick and convenient removal and installation of a push/pull attachment. The rugged Cascade QFM can be installed or removed in less than one minute and does not require removal of the lift truck forks. Ideal for applications requiring an attachment for slipsheets on an intermittent or irregular basis Features Chamfered platen corners prevent tears in the slipsheet Gripper jaw design protects tabs 4 tilting faceplate Frame mounts between the forks (20.5 spacing) for minimum lost load (effective thickness) High visibility pantograph, gripper jaw and faceplate High strength, rigid pantograph mechanism Abrasion resistant steel platens Cylinders, valve and hydraulics are protected within the arms

The 20G Rotator provides the ability to quickly dump or invert a load easily and accurately. It is ideally suited for seasonal use in the agriculture industry and provides versatility when inverting and dumping bins is required. Features Unique Cascade drive is designed specifically for seasonal use in the agriculture industry. Hydraulically operated bin retainer designed to securely clamp on top of the bin and hold it in place while rotating. 180 degree rotation to quickly dump or invert a load and immediately return to the pick-up position. Good torque performance ensures smooth, positive rotation of the load. Designed for handling plastic, wooden and metal bins used in the agricultural market.

Lightweight bin retainer for the agricultural market. Holds plastic and wooden bins securely during rotation. For bin inverting and dumping versatility Features Easy mounting and removal Front bar chamfered for easy bin pick-up Wide lower hook for stability Heavy duty upper fork hook Adjustable in 3/4 increments

The Drop Bottom Box Dumper (BBD) is designed to lift special metal bins with a hinged bottom. Typically found in the metal forming industry, a BBD can also be used in many other applications from warehousing to automotive.

Used for handling wide loads such as trusses, rebar and pipe, the Fixed Fork Spreader has two additional forks to provide stability for the load. Can be mounted on pin-type carriage, ITA carriage or sideshifting carriage. Quick Disconnect makes it easy to mount and detach.

A safe and efficient method of handling forgings and castings when loading and unloading furnaces and forging presses. Features 360 rotation ITA hook mounting or pin type Protected cylinder for arm open/close Protected revolving connection and hoses Heavy-duty pivot bearings Heat-treated pins

Designed to provide the agricultural, food processing, and manufacturing markets an efficient and economical means of handling and dumping bins. Can easily accommodate various bin heights by manually adjusting the top bin stops.

Two model offerings allow you to handle either 18 full barrel kegs or 36 empty barrel kegs. They provide a safe and efficient method for loading and unloading trailers at breweries, distributors and warehouse operations. Not designed to handle Sankey kegs. Features Four special scalloped forks Bolt-on keg stabilizer arms Integral load backrest Class II bolt-on lower hooks

Extending the load is a useful application when loading and unloading trucks or railcars from one side only. On the front of the load extender a range of attachments can be fitted, like fork positioners and roll clamps, making the load extender a flexible tool. Features Extended reach allows the operator to work from one side which reduces working time and increases productivity.

Designed for transporting unstable loads such as soft drinks, malted beverages, bottled water and empty containers, Load Stabilizers allow faster operating speeds and more efficient handling procedures by securing the palletized load. They are particularly valuable in outdoor operations and facilities with rough floors. E-Series Load Stabilizers have a net capacity of 3, 500 lbs. and are available with a wide range of pad sizes, arm configurations and backrest styles. Features Excellent driver visibility Narrow frame width Frame fits between forks Thin arm pad profile Highly competitive rating specifications Internal relief valve Carriage compatibility

A reliable and efficient method of handling marble, granite and other stone slabs, the Marble Handler is designed to support the load as it is pulled out of a closed-top container. The load can then be picked up with an overhead crane. Features Traversing carriage Thin arm pad profile Internal relief valve Carriage compatibility

Designed for the mining and earth moving industries and may be used in any application requiring the need to handle earth moving tires. The Cascade Tire Handler allows you to safely handle OTR tires weighing up to 34, 200 lbs. (15.6 metric tons). The ability to rotate, tip and sideshift the tire provides the flexibility needed to align the tire to the truck and complete the tire change without the lift truck driver leaving the cab of the lift truck.