Write a Review
Our Products
Our Complete range of products are MAGNETIC FLOW METER FOR TEXTILE INDUSTRIES, BTU HEAT METER, Turbine Flow Meter for Air and Turbine Flow Meter for Diesel.
CBRO make BTU-250 is a versatile compact energy totalizer extremely useful for measurement of energy convertion. Itmeasures the thermal energy required for air conditioning. It accepts 3 inputs, each one from a flow meter for Chilled water, inlet temperature sensor and outlet temperature sensor. From this it calculates the thermal power and energy consumed inmaintaining the temperature at given level. 9 digits are available for total energy and 4 digits Are available for instantaneouspower reading. The engg. unit can be easily selectable by user, either as KW & KWH or BTU / HR & BTU
* Compact Wall Mounting Design with IP 65 Enclosure.
*16 X 2 LCD Display For Total Energy As Well Instantaneous Power.
* Display of Chilled Water Flow, Power Temperature Available.
* Choice of Mounting Either on Inlet or Outlet As Per Site Conditions.
* Choice of Engineering Units : KW or BU
* Data Storage Upto 1 year With Hourly Storagefacility With Realtime.
* Storage Can Be Viewed By Scrolling Keys.
* Serial Interface With Computer Through MODBUS RTU
1. High Accuracy2. Output : 4-20mA3. Batching4. Media : Water, Diesel, Petrol , Air
Turbine Flow Meters are useful for liquids & gases in general industrial application for measuring flow rate.
| Turbine Flowmeter (TFM-70 Series)
|
| CBRO Turbine Flow Meters are useful for liquids & gases in general industrial application. They provide excellent performance with quality & reliability. Suitable for as hygienic application. The flowing media engages a vaned rotor causing it to rotate at an angular velocity proportional to flow rate. The pick -of coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal. Summation of the pulsating electrical signal is directly related to the total flow. The frequency is linearly proportional to flow rate which is converted to mA signal by electronic circuitry. Flow rate Indicator / Totalizer / Transmitter and Controllers are available in Local/Remote and Panel Mounted |
Specification:
| Fluid | : | Clear Liquids & Gases | Flow Units | : | M3/H,M3/M,M3/S L/H,L/M,L/S,USG/H,USG/M,USG/S |
| Viscosity | : | Up to 20 cp | Design Temperature | : | Up to 110C |
| Design Pressure | : | 10Kg/cm2 | Power Supply | : | 220 VAC/24VDC |
| Line Size | : | 6mm to 200mm | Output | : | 4-20 mA & pulse |
| Available Materials | : | SS304 /SS304L/SS316/SS316L | Relay Output | : | Low & High Flow Alarm |
| Connection | : | Flanged to ASA/BS/DIN/ Triclover Standard | Display | : | LCD 4 Digit Flow rate and 9 Digit for Total flow, frequency |
| Screwed to BSP/NPT(M/F) | Communication port | : | RS485 Modbus -(Optional) | ||
| Accuracy | : | 1% of FSD & 0.5% on request | Lowest velocity | : | 0.1 m/s |
1.Accuracy:+/-1.0%2.Pipe range:DN2-DN3003.Environmental temperature:-30C to 60C4.Simple and durable construction
Turbine Flow Meters are useful for liquids & gases in general industrial application for measuring flow rate.
| Turbine Flowmeter (TFM-70 Series)
|
| CBRO Turbine Flow Meters are useful for liquids & gases in general industrial application. They provide excellent performance with quality & reliability. Suitable for as hygienic application. The flowing media engages a vaned rotor causing it to rotate at an angular velocity proportional to flow rate. The pick -of coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal. Summation of the pulsating electrical signal is directly related to the total flow. The frequency is linearly proportional to flow rate which is converted to mA signal by electronic circuitry. Flow rate Indicator / Totalizer / Transmitter and Controllers are available in Local/Remote and Panel Mounted |
Specification:
| Fluid | : | Clear Liquids & Gases | Flow Units | : | M3/H,M3/M,M3/S L/H,L/M,L/S,USG/H,USG/M,USG/S |
| Viscosity | : | Up to 20 cp | Design Temperature | : | Up to 110C |
| Design Pressure | : | 10Kg/cm2 | Power Supply | : | 220 VAC/24VDC |
| Line Size | : | 6mm to 200mm | Output | : | 4-20 mA & pulse |
| Available Materials | : | SS304 /SS304L/SS316/SS316L | Relay Output | : | Low & High Flow Alarm |
| Connection | : | Flanged to ASA/BS/DIN/ Triclover Standard | Display | : | LCD 4 Digit Flow rate and 9 Digit for Total flow, frequency |
| Screwed to BSP/NPT(M/F) | Communication port | : | RS485 Modbus -(Optional) | ||
| Accuracy | : | 1% of FSD & 0.5% on request | Lowest velocity | : | 0.1 m/s |
Electromagnetic flow meters1. High Quality2. Water Treatment Flow meter3. Dairy Industry.4. Sugar Industry.
CBRO Make Electromagnetic flowmeter of series DIGIMAG -250 accurately measures the flow rate of conducting liquids or slurries flowing in closed pipes. Due to simple and right design the flowmeter is an obstruction less & maintainence free instrument in place of conventional mechanical flow measuring device. The use of Pulsed DC technology offershighest ability & better measuring accuracy in form of 4-20mA DC linearly proportional to volumetric flow.
CONSTRUCTION DETAILS
CERTIFICATIN : CE CERTIFIED
METERINGTUBE : S.S 304
ELECTRODE : S.S 316
FLANGE : C.S.
LINING : PTFE
END CONNECTION :ASA150#Flanged as per B 16.5.
MOUNTING : Inline
ACCURACY : +/-0.5% of Actual Flow Rate(+/- 0.3%, +/-0.2% on request)
REPEATABILITY : +/- 0.2% F.S
MIN CONDUCTIVITY : 10 uS/cm
MAX PROCESS TEMP. :0-60 deg C Normally (Higher Temperature Available)
PRESSURERATING :10 Bar(Higher Pressuer Available)
MAINSPOWER :230 V AC 50Hz / 24 V DC
ENCLOSURE M.O.C. : Cast Aluminum IP65SignalAmplifier Box
Size 220 X 120 X 85 mm with glass window.
CABLE ENTRY :PG-9 / PG-11
FLOW UNIT : Selectable.
EMPTY PIPEDETECTION : Available
LOW CUTTOFF : Available
OUTPUT : 4 20 Ma
COMMUNICATION : RS 485 MODBUS
DIRECTION : Suitable for Bi- Directional
PROGRAMMING : Through Key/ Keypad on front facia.
TERMINALS : Shock Hazard Protected screwless terminals.
SIGNAL CONVERTOR : Integral / Remote (with 3 meterCable)
INTERCHANGE ABILITY :Fully interchangeable with all sizes of flow sensors.
POWERFAILURE MODE :Provision of RAM/PROM to store parameterentered and measured flow dataduring power failure
Features :
*DIN 10 TO DIN 1200NB pipe line.
*High Accuracy better than +-0.5% of reading.
*Zero Pressure Drop.
*Suitable for High Viscosity Conductive Liquids.
*Digital Flow rate / Totalizer Indication.
*Isolated Transmitting Output 4-20 mA.
*No Grounding Rings require.
*Minimum Upstream & Downstream Stright Length.
*Compact & Rugged, IP 65 protection.
*Remote Flow indication Totalizer / batching systems.
Applications :
1. Effluent Treatement Plants.
2. Sewage Treatement Plants.
3. Water Supply Schemes.
4. Steel & Aluminium.
5. Pulp & Paper.
6. Chemical & Fertilizers.
7. Food & Drug.
8. Pumps & Valve Calibration Lab.
9. Dairy Industry.
10. Corrosive Liquids.
11. Sugar Industry.
Rohan Chalke (Cbro Incorporation)
B-204 Princeton Hirananadani Estate G. B. Road ThaneMaharashtra400607India, Mumbra
Share us via
