We are a prominent Jib Cranes Manufacturer recognized as an Exporter and Supplier in India and around the world. Designing and production of the Jib Cranes is done to give different types as per the capacity. Made using heavy-duty components, the Jib Cranes are made to have a long functional life and offer reliable performance in handling material safely for a long time. Construction Mast Carbon steel pipe of various sections Thickness : As per loading conditions, boom length, height etc. Arm section or as per specifications Also made from Zero friction rail to suit ergonomic handling systems Vertical Arm Standard sections or built up sections As per capacity and sizes of crane Element Made up of robust bearing assembly Less maintenance required Guide Ring 360 o rotation type jib crane Vertical arm rotates over this Requires regular cleaning and greasing Guide Wheel Assembly Connected to the vertical arm that rotates on guide ring Needs regular cleaning and greasing Span The arm length of crane Hook Height When it is in IOD position, it stands for maximum height of hook hoist Overall Height Maximum crane height over which no crane part is extended Base M.S. Plate, with size as per crane size and capacity Foundation bolts or Chemical Anchoring can be provided Mechanical Stoppers To restrict arm rotation to operating area Installation (Plumbing Mast) Usually installation is done using chemical anchors bolts and by foundation bolts in heavy-duty cranes Drop plumb line from top of mast, using fixture or equivalent At point 50 mm below the top mast plate, set plumb line a distance of 100 mm from the surface of the mast pipe At point "Y", 1500 mm below point "X" (approximately where rollers will contact mast pipe), the distance between plumb line and the surface of the mast pipe should also be 100 mm When mast is plumb and grout (FS300l) has cured; fully tighten the anchor bolt hardware Verify mast is plumb or not To prevents doom drifting Mast should be plumb Salient Features Standard Variable Frequency Drive (VFD) VFD ideal for single or multiple speed requirements Excellent load control is offered by VFD Positioning from slowest to maximum speed is easily possible Up to 25 times smoother than ballast resistor controls Produces very less heat Accurate starting and stopping Easily adjustable speed control Control panel with simple keypad for adjusting Acceleration rate Deceleration rate Rotation speed Low cost of maintenance No need for magnetic reversing contractors Reduces wearable components Panel wiring dig and VFD Manual is provided with crane Maintenance Instructions Periodicity greasing of main elements in between 6 to 12 months as per operational frequency Checking of foundation bolt fittings should be done at fixed intervals to avoid arm rotation imbalance Greasing of Guide Ring should be done on a monthly basis or earlier Loosening of Gear meter bolts must be checked to see gear and pinion alignment is proper or not Demanded by Steel Plants Construction industry Chemical industry Refineries Defense sector Mining industry Nuclear power plants

We are offering out door jib crane with powerized boom rotation. most flexible handling system for the given work station.2 designed for handling medium & heavy loads.boom is usually of std. I beam construction, rotates for 3500, & can be restricted to any degree of rotation with mechanical stoppers.all movements are hosed in single pendent, boom ratation in with positive gear drive arrangement with vfd control package for variable boom ratation speed .used with electric chain hoist & manual chain pulleys.a capacity varies from 1500 kg to 5000 kg.moduler built for easy installation & placement.available with various boom length & various hook height.most of the jib cranes installed with chemical anchoring even up to 2000 kg.capacity. In dependance of boom length & the floor concrete quality othewise on the pre-installed foundation bolts.availble in yellow colour & can be painted any colour on demand.

We are a leading Manufacturer of Single Girder and Double Girder EOT Cranes and Gantry Cranes. Our cranes are with twin drive for LT motions and can be available with center drive arrangement on demand. We follow BIS standards, to manufacture the above cranes. Girders are made with both beams and Plate fabricated structure as per the design requirements provided with the required camber so that the Girder deflection in full load condition will remain well within its allowable limit. It is easy to carry out maintenance of the crane as our cranes are of modular construction with imported good quality gear boxes and motors. Product Features : Produced according to IS std. IS807, IS3177, IS4137. Robust construction & Rigid design Excellent functioning and smooth operation Maintenance and operator friendly Provided with both LT and CT motions limits Reliable Precise start and stop as we use electro-magnetic brakes Product Specifications : IS 807-1963 Code of Tractive for Design, Manufacture, Erection & Testing (Structural Portion) of Cranes & Hoists IS 3177-1965 Code for Design of overhead Traveling Cranes & Gantry cranes other than Steel Mill Cranes IS 4137 Code of Practice for Design of Steel Mill Duty Cranes

• TypeElectric Chain Hoist
• ColorRed
• ConditionNew
• DrivenElectric
• Loading Capacity10-15Tons
• Country of OriginIndia

• TypeFestoon Systems
• ApplicationAutomobiles, Automotive Industry, Crane, Fittings, Fittings Use
• Surface FinishingPolished, Power Coated
• Country of OriginIndia

• TypeHydraulic Floor Cranes
• ApplicationConstruction
• ConditionNew
• Driven TypeHydraulic
• Country of OriginIndia
• Brand NameMALGUDI

We are offering jib crane with sliding boom type. most flexible handling system for the given work stationdesigned for handling medium loads.boom is profile section supported with tubueler section, rotates for 3600, & can be restricted to any degree of rotation with mechanical stoppers.used with electric chain hoist, manual chain pulleys & also with air balancers.a capacity varies from 50 kg to 500 kg.moduler built for easy installation & placement.available with various boom length & various hook height.these jib cranes are installed with chemical anchoring .availble in yellow colour & can be painted any colour on demand

• ApplicationIndustrial
• ConditionNew
• Automatic GradeSemi Automatic
• Country of OriginIndia

we do take up the jobs for assy. Automation as per the customer requirements with light profile tracks along with balancers, zero gravity balancers, hoists as the lifting devices for various capacities up to 1000kg capacity. as system is one of the ergonomic handling systems, peoples find it most flexible for part of the assy. Automation systems. It need minimum human efforts with max: working speed to handle. these systems are privided with proper supporting structure  from roof, simply supported & cantilever type depending on the site conditions.

• TypeFestoon Systems
• ApplicationAutomobiles, Automotive Industry, Crane, Fittings, Fittings Use
• Surface FinishingPolished, Power Coated
• Country of OriginIndia

We are a prominent Jib Cranes Manufacturer recognized as an Exporter and Supplier in India and around the world. Designing and production of the Jib Cranes is done to give different types as per the capacity. Made using heavy-duty components, the Jib Cranes are made to have a long functional life and offer reliable performance in handling material safely for a long time. Construction Mast Carbon steel pipe of various sections Thickness : As per loading conditions, boom length, height etc. Arm section or as per specifications Also made from Zero friction rail to suit ergonomic handling systems Vertical Arm Standard sections or built up sections As per capacity and sizes of crane Element Made up of robust bearing assembly Less maintenance required Guide Ring 360 o rotation type jib crane Vertical arm rotates over this Requires regular cleaning and greasing Guide Wheel Assembly Connected to the vertical arm that rotates on guide ring Needs regular cleaning and greasing Span The arm length of crane Hook Height When it is in IOD position, it stands for maximum height of hook hoist Overall Height Maximum crane height over which no crane part is extended Base M.S. Plate, with size as per crane size and capacity Foundation bolts or Chemical Anchoring can be provided Mechanical Stoppers To restrict arm rotation to operating area Installation (Plumbing Mast) Usually installation is done using chemical anchors bolts and by foundation bolts in heavy-duty cranes Drop plumb line from top of mast, using fixture or equivalent At point 50 mm below the top mast plate, set plumb line a distance of 100 mm from the surface of the mast pipe At point "Y", 1500 mm below point "X" (approximately where rollers will contact mast pipe), the distance between plumb line and the surface of the mast pipe should also be 100 mm When mast is plumb and grout (FS300l) has cured; fully tighten the anchor bolt hardware Verify mast is plumb or not To prevents doom drifting Mast should be plumb Salient Features Standard Variable Frequency Drive (VFD) VFD ideal for single or multiple speed requirements Excellent load control is offered by VFD Positioning from slowest to maximum speed is easily possible Up to 25 times smoother than ballast resistor controls Produces very less heat Accurate starting and stopping Easily adjustable speed control Control panel with simple keypad for adjusting Acceleration rate Deceleration rate Rotation speed Low cost of maintenance No need for magnetic reversing contractors Reduces wearable components Panel wiring dig and VFD Manual is provided with crane Maintenance Instructions Periodicity greasing of main elements in between 6 to 12 months as per operational frequency Checking of foundation bolt fittings should be done at fixed intervals to avoid arm rotation imbalance Greasing of Guide Ring should be done on a monthly basis or earlier Loosening of Gear meter bolts must be checked to see gear and pinion alignment is proper or not Demanded by Steel Plants Construction industry Chemical industry Refineries Defense sector Mining industry Nuclear power plants

We are offering out door jib crane with powerized boom rotation. most flexible handling system for the given work station.2 designed for handling medium & heavy loads.boom is usually of std. I beam construction, rotates for 3500, & can be restricted to any degree of rotation with mechanical stoppers.all movements are hosed in single pendent, boom ratation in with positive gear drive arrangement with vfd control package for variable boom ratation speed .used with electric chain hoist & manual chain pulleys.a capacity varies from 1500 kg to 5000 kg.moduler built for easy installation & placement.available with various boom length & various hook height.most of the jib cranes installed with chemical anchoring even up to 2000 kg.capacity. In dependance of boom length & the floor concrete quality othewise on the pre-installed foundation bolts.availble in yellow colour & can be painted any colour on demand.