CETCON Building Technologies Pvt Ltd

Gandhinagar, Gujarat

Product Code : 317

We are one of the eminent Manufacturers, Exporters and Suppliers of CETCRETE AR. Our Acrylic based polymer component for waterproofing is the best in the market. We make it using premium raw materials sourced from renowned manufacturers. Our CETCRETE AR is known for its compositional accuracy and balance. We offer CETCRETE AR at economical prices and provide customized packaging solutions for it as well.

Description : CETCRETE AR is saponification - resistant acrylic co-polymer dispersion with extraordinary favorable characteristics when as polymer component in hydraulically setting mortars

Advantages :

• Strength of adhesion to the base is distinctly improved.
• The compressive and flexural strength is increased compared with the reference mix.
• Water absorption is reduced, thus providing waterproofing properties.
• The water retention value of the mortar is improved this involving less risk of drying out, shrinkage crack etc.

Area of application :

• Waterproofing water retaining structures, terraces, roofs, basements, parapets, swimming pools, bathrooms and sunken portions of toilet blocks.
• General concrete repairs, Protection of concrete against corrosion and salt attack.

Direction of use:

• Remove all dirt and loose particles from the surface by wire brush.
• For best results, damp the surface before coating.
• Pour the CETCRETE AR one part of liquid into a suitable container.
• Add lumps free 2 part of cement to the above mix and mix for 2 to 4 minutes to obtain smooth, lump free slurry.
• Apply the mixed material with a stiff brush marking out the area apply like a paint.
• Keep stirring the mixed material to avoid setting during application and apply within 30 minutes after mixing.
• Apply second coat after 6 to 8 hour of first coat with other direction.

Coverage : 2 sq.mts. per kg in two coats depend upon application and surface.

Packing : Supplied in 1 kg, 5 kg, 10 kg, 20 kg, 50 kg & 225 kg

Product Code : 917

Located in Gujarat, we have amassed lot of appreciation from our global clients for manufacturing, supplying and exporting the high-quality CETCRACK at affordable prices. This efficient Polymer Modified Crack Filler Powder displays amazing adhesive properties, flawless finishes and excellent resistivity to adverse environment. Durable-in-nature, it is formulated with eco-friendly ingredients. For availing CETCRACK at discounted prices, turn to us!

Description : CETCRACK is a speci ally formulated cement based polymer modified powder for filling cracks in plastered surfaces. When mixed with water forms a creamy consistent paste which is easy to use for filling cracks.

Advantages :

• Good adhesion
• Smooth finish
• High tensile strength
• Non shrink

Area of application : Repairing of cracks in internal and external plaster to give a thin render coat to even out surface

Direction for use :

• Clean the crack to remove all loose material. If crack is too fine, it must be broken to ascertain its actual width and depth. Ensure the surface is free from oil, dust and grease.
• Develop the cracks in v shaped groove.
• Sprinkle water on prepared groove to remove loose particles.
• Mix 3.5 volumes of crack filler CETCRACK to one part of water to get uniform consistency.
• Apply this past to a clean groove & press properly finishes the surface as desired.
• Painting work can start after 24 hours.

Coverage : Approx. 60 RFT/ kg for 5 mm x 5 mm crack

Packing : Supplied in 1 kg & 30 kg