Other Products / Services #3089707

UKL Trap Modules are available in two versions:

The open loop: Where the condensate is let out to the atmosphere, and consists mainly of one inlet Isolation, Bypass valves and a Steam Trap.

The Closed loop: Where the condensate connected for recovery, consist with Valves upstream and downstream isolation and Bypass, Strainer (for Ball Float), Steam Traps, Sight Glass, Non-return valve, Sight Glass, diffusers (for TD trap) etc.

Available in Carbon Steel, Stainless steel construction.

• 15mm to 25mm Complete Fabricated Modules with Thermodynamic & Thermostatic steam traps
• 15mm to 50mm Complete Fabricated Modules with Ball Float type steam traps

It is cumbersome, occupies more space and involves a number of joints, piping components, Welding and other process and statutory certification in most cases and is extremely time consuming.

Uni Klinger can provide the Gland Packing for other applications where one need tight seal in static or rotating application.

Uni Klinger can provide the Gland Packing for other applications where one need tight seal in static or rotating application. Uni Klinger offers Non Asbestos Gland Packing from 3mm Sq to 25mm Sq size.

Uni Klinger can provide the Gland Packing for other applications where one need tight seal in static or rotating application.

Uni Klinger offers Non Asbestos Gland Packing from 3mm Sq to 25mm Sq size.

Anti Stick This eliminates the need for application of grease to flange surface. Results in faster and safer flange cleaning. Ensures better sealing with replacement Gasket.

Anti Corrosion This finish reduces the amount of leachable chlorides at the contact Surface with flange thus reducing the corrosive effect of Flange material.Asbestos Free Surface This property confirms complete Asbestos free surface without changing any Chemical and Physical properties of Gasket.

Sheets are manufactured in Metallic & Non-Metallic to cover maximum pressure up to 200bar & temperature up to 550 degree C.

Sheets size available: 1.5mx2m, 1.5m x4m , 1.5mx6m Thickness available: 0.5mm to 6mm thickness.

Advantages

• UKL has been approved by BIS to manufacture all grades of sheets with ISI Mark
• Klinger gaskets are designed for 0.25ml/minute leak rateas against 3ml/min allowable leak rate as per DIN3535/6

Series F in-line shaft mounted geared motors offer ratios from 5:1 to 100:1 in double reduction form and in combined units form upto 20, 000:1.Motors are available upto 45 kw giving a maximum output torque of 7200Nm.The series F geared motors are primarily designed as a shaft mounted unit incorporating an integral torque reaction bracket. The units are also available with bolt-on feet or output flanges and output shafts of single and double extension. All variants are available either motorized or with output shaft assembly.Motorized units can be fitted with backstop while reducer units can be fitted with backstop and fan.

Rack & Pinion Pneumatic

Scotch & Yoke Pneumatic

Electric Rotary

Aluminum Die Cast powder coated body

Polycarbonate Dome

Fully Adjustable spring loaded cams

Special PCB to eliminate complex wiring

Protection against short circuit

1/2"/ 15 mm size conduit entry

Namur mounting as standard

Enclosure as per weatherproof to IP65/ IP67

Suitable to withstand temperature (-)20C to (+)80C

Air Filter Regulator

Manual Gear Operators

Valve Positioner

I-P Converter/ Smart Positioner

Quick Exhaust Valve

Air Lock Relay

Speed Control Valve

Fittings & Tubing

Air Reservoir Tank

UKL Ball Float Trap discharge condensate near to steam saturation temperature, which works on the principle of Buoyancy, [densities difference of Water and Steam].The rising condensate level elevates the Float open the valve and discharges the condensate, and reverse, when the level of condensate drops, valve close the trap.

The working principle of this trap can also be used as Auto Air Moisture Drain, as Air Eliminator in liquid line, as well as for lifting condensate, as a pump.

• MOC: Cast Iron and Cast Carbon Steel
• Available in Sizes: 15 mm - 50 mm
• End connections: Screwed/Socket weld ends, Flanged ends to #150 / 300 /600
• Available for working pressure up to 40 bar and Differential Pressure up to 32 Bar

Reflex Gauge:

Works on the principle of Total Internal Refraction of light through the Reflex glass having grooves giving clear Black and white indication of the level in the vessel. For Steam at 40 bar saturated temp, and other media 40 bar 400 Deg C.

Transparent type:

Using Transparent glasses, two in numbers, giving a level indication in the form of rising and falling meniscus. This often requires the use of Illuminators to view the level. Steam at 40 bar.85bar and 120Bar saturated temp. Other media 400 deg C.

Bicolor type:

A variation of the transparent type, wherein the incident light is made to pass through a wedge shaped centerpiece, to separate the light. The same is viewed through filters to see Green and Red light for Steam and Condensate. Steam: 180 Bar Saturated Temp.

The level gauges can be provided with accessories like double arm lever, Illuminators, Scales, and Non Frosting Blocks. Inclined type as well as Direct Weld - On type.

Therefore it makes sense to recycle reuse this condensate. This function is also done by the inverted bucket trap, which works on the principle of buoyancy, [densities difference of water and steam].the rising in condensate level fills and envelopes the bucket causing it to sink which open the mechanically linked valve and discharges the condensate, and reverse, when the level of condensate drops steam enters the bucket, causes the flotation of the bucket which close the valve and stops condensate discharge & traps the steam.

We are leading manufacturer and supplier of huge range of Flow Meters.