Post Buy Requirement
CA
Ankleshwar, Gujarat, India
Verified Add Review

Valves & Valve Fittings

Bellow Seal Valves

Irrespective of proper selection, installation and periodic and preventive cares on conventional valves, leakages cannot be totally eliminated. Though performance seems to be satisfactory initially, they are bound to leak through gland after some operations. Selection of Bellow Sealed Valves is the only solution for this problem.

Therefore, use of bellow seal valve is on the increase.

 

Bellow Seal Valves because they Aid, help and complement -

  • Stringent fugitive emission Laws
  • Environment Protection Laws
  • Air Purification or Clean Air Act.
  • Greenhouse Effect Prevention Bill
  • Energy conservation Law

 

Available in Gate / Globe / Angle valves versions. They incorporate a Metallic SS bellows which is flexible welded to the shaft at the lower end and to the Body-Bonnet Flange at the other thus effectively shutting off any leak/emission to the atmosphere.

The Hydra Brand Bellows incorporated in UKL valves are imported from Germany, manufactured as per International Standards, ensuring a consistent and reliable performance, long life and uncompromising Quality.

View Complete Details

Piston Valves

UKL piston valves are ideally recommended for critical and hazardous media, including Steam, Heat Transfer Oils, Acids, Gases, VACUUM.

Manufactured in Forged Carbon Steel / Stainless Steels to 800# - Sizes 15mm to 40mm, in SW and Threaded Ends. Cast Carbon Steel / Stainless Steels with Flanges to 150#, #300 & DIN standards – 50 to 200mm.

Salient Features

  • Economic, easy to service
  • Absolutely leak-tight across the ports and to the atmosphere
  • No erosion of sealing surface
  • Saves energy and does not contaminate the environment
  • Maintenance free

 

UKL Piston valves can be provided with additional feature like

  • Regulating Piston/Lantern Bush; for coarse regulating/Throttling operation
  • Extended Spindle: For Cryogenic application/Hot media to prevent heat transfer to H/W and aid handling of valve
  • Heating Jacket: For Media that tends to solidify/crystallize at low temperature and needs constant heating by either steam/Thermic oils circulated through the Jacket.
  • Pneumatic, Hydraulic or Electrical Actuator: For remote operating of the Valves
View Complete Details

Ball Valves

Full BoreReduced Bore.

Type 2 Piece, Full Bore/ Reduced Bore (Fire safe)
Size 15- 300 mm/ 1/2"- 12"
Body  WCB/ CF8/ CF8M/ CF3/ CF3M/ LCB/ CA15
Ball CF8/ CF8M/ CF3/ CF3M/ LCB/ CA15
Seat PTFE/ RPTFE/ PEEK
Ends Flanged RF/ RTJ to ANSI B16.5
Stem ASTM A479 SS 304, SS 316/ ASTM A182 SS410
Operation Lever/ Gearbox/ Pneumatic/ Electric Actuator
Temperature (-)29°C  to (+)200°C
Pressure As per Class 150, 300, 600, 900
View Complete Details

Trunnion Mounted Ball Valves

Trunnion mounted/ 2 Piece Design
Trunnion mounted/ 3 Piece Design

Type Trunnion mounted, Full Bore/ Reduced Bore
Size 50- 600 mm/ 2"-24"
Body  WCB/ CF8/ CF8M/ CF3/ CF3M/ LCB/ CA15
Ball CF8/ CF8M/ CF3/ CF3M/ LCB/ CA15
Seat Nylon/ Viton/ Devlon/ PEEK
Ends Flanged RF/ RTJ to ANSI B16.5
Stem ASTM A479 SS 304, SS 316/ ASTM A182 SS410
Operation Lever/ Gearbox/ Pneumatic/ Electric Actuator
Temperature (-)29°C  to (+)200°C
Pressure As per Class 150, 300, 600, 900, 1500
View Complete Details

Screwed End Ball Valves

3 Piece DesignScrewed/ Socket weld end connections.

Type 3 Piece Body, Full Bore / Reduced Bore
Size 15- 50 mm/ 1/2"-2"
Body  WCB/ CF8/ CF8M/ CF3/ CF3M
Ball AISI 316/ CF8M/ CF3M
Seat PTFE/ RPTFE
Ends BSP(F)/ BSP(T)/ NPT/ Socket Weld
Stem ASTM A182 SS304/ SS316
Operation Lever/ Pneumatic/ Electric Actuator
Temperature (-)29°C  to (+)200°C
Pressure As per Rating 1000 (WOG)
View Complete Details

Oilfield Ball Valves

Full Bore / Reduced bore


Type 2 Piece, Full Bore/ Reduced Bore (Fire safe)
Size 15- 150 mm/ 1/2"- 6 "
Body  WCB/ CF8/ CF8M/ CF3/ CF3M/ LCB/ CA15
Ball CF8/ CF8M/ CF3/ CF3M/ LCB/ CA15
Seat PTFE/ RPTFE/ DELRIN/ PEEK
Ends Flanged RF/ RTJ to ANSI B16.5
Stem ASTM A479 SS 304, SS 316/ ASTM A182 SS410
Operation Lever/ Gearbox/ Pneumatic/ Electric Actuator
Temperature (-)29°C  to (+)200°C
Pressure As per Class 150, 300, 600, 900, 1500
View Complete Details

Forged Steel Valves

Complies to API 602, BS EN 15761

Size 15mm to 50mm
Type Gate, Globe, Check
Material  A105, F304, F316, F11, F22
Ends Screwed, Socket Weld, Butt weld
Rating Class 800, 1500
Specials Extended Bonnet
Testing As per API 598/ BS EN 12266
View Complete Details

Thermodynamic Steam Traps

These traps used largely on Tracing lines or Tank Farms where steam is supplied to maintain Temp / viscosity of the Oil.


UKL Thermostatic trap has a unique Simple design, Minimum number of components and where the Bellow is enclosed and protected thus ensuring long life for the Bellows



  • MOC: Forged Carbon Steel and Stainless steel.

  • Sizes: 15 mm - 25 mm.

  • End connections: Screwed/Socket weld ends.

  • For Max Press up to 31 bar and Max. Temp 300Deg.C.


View Complete Details

Ball Valve

Chem-Tech Associates is a prominent engineering and distribution company of high quality ball valve in India.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Mrunal Suthar (Chem-tech Associates)
  • SF-6, Ravi Kiran Complex,Valia Chokdi, Ankleshwar Gidc, Gujarat - 390002, India
  • Share us via
  • Call 08068051369 Ext. 091