TheVentilated Faadeor Double-skin facadeis a system of building consisting of two skins placed in such a way that air flows in the intermediate cavity.
The ventilation of the cavity can be mostly natural. Apart from the type of the ventilation inside the cavity, the origin and destination of the air can differ depending mostly on climatic conditions, the use, the location, the occupational hours of the building and the HVAC strategy.
In hot climates the cavity may be vented out of the building to mitigatesolar gainand decrease the cooling load.Most used products for ventilated Faade are Solid Sheet cassettes , Perforated Sheets , Dry Stone Cladding and Solid Sheet wide Planks with Suitable Stringers.
Whether for renovation or for new Project , it is always economic aspects that prompt the useof pre-painted aluminum as a material for faade for cladding with ventilation.The reason for selection of ventilated faade includes a variety of design possibility, longevityand very low operating cost during the use of building.

Aluminum tubular construction.
Anodizing or Powder Coated Safety Yellow.
Steel spring for self-closing actuation.
Designed to fit tubular Modular EnduRail handrail or guardrail
Gate does not require a stop point at closing side.
Gate arm can be of any length up to 750 mm for versatility.

nduRail offers a strategic integrated modular Railing and Guard rail solution to meet your safety requirements with absolute confidence for industrial structures, loading docks, walkways, to safety railings in aggressive environments, coastal environments, work platforms and the protection of road bridges and culverts.

EnduRail Structural Fittings Features

• Aesthetic Look and speed rail Design
• Lightweight, Corrosion resistant
• Low Long-Term Maintenance
• Cost Effective Alternative to Welding
• Pipe Fittings use with anypipeincluding aluminum, galvanized steel, stainless steel and black iron.

EnduRail aluminum handrail fittings are made from high-grade Aluminum Alloy to provide you strong alternative for fabrication of pipe structures similar form Kee safety klamp or Slip-on fittings. Combination of EnduRail Aluminum structural fitting forms a versatile, economical, and durable method of building tubular structures. EnduRail railings are only one-third the weight of iron railings, with about 75% of comparable tensile strength.

Because EnduRail Aluminum Pipe Railing Fittings can be easily installed with a hex key and pipe cutters there is no need to weld, thread or drill saving you both time and money. EnduRail is securely locked into place using large recessed setscrews that provide a smooth look to your rail or tubular structure system.

EnduRail Slip on rail fittings provide unlimited options of tubular structure requirement in Guardrails, Safety Barriers, Machinery Guards, Store fixtures, Awnings, Solar Panel Installation and Roof Edge Protection.When EnduRail Structural Fittings are used with correct specification of pipe and correct method of design is employed, it will meet the requirements of OSHA 29 CFR 1910.23 load standards.

EnduRail offers a strategic integrated modular Railing and Guard rail solution to meet your safety requirements with absolute confidence for industrial structures, loading docks, walkways, to safety railings in aggressive environments, coastal environments, work platforms and the protection of road bridges and culverts.

EnduRail Structural Fittings Features

• Aesthetic Look and speed rail Design
• Lightweight, Corrosion resistant
• Low Long-Term Maintenance
• Cost Effective Alternative to Welding
• Pipe Fittings use with anypipeincluding aluminum, galvanized steel, stainless steel and black iron.

EnduRail aluminum handrail fittings are made from high-grade Aluminum Alloy to provide you strong alternative for fabrication of pipe structures similar form Kee safety klamp or Slip-on fittings. Combination of EnduRail Aluminum structural fitting forms a versatile, economical, and durable method of building tubular structures. EnduRail railings are only one-third the weight of iron railings, with about 75% of comparable tensile strength.

Because EnduRail Aluminum Pipe Railing Fittings can be easily installed with a hex key and pipe cutters there is no need to weld, thread or drill saving you both time and money. EnduRail is securely locked into place using large recessed setscrews that provide a smooth look to your rail or tubular structure system.

EnduRail Slip on rail fittings provide unlimited options of tubular structure requirement in Guardrails, Safety Barriers, Machinery Guards, Store fixtures, Awnings, Solar Panel Installation and Roof Edge Protection.When EnduRail Structural Fittings are used with correct specification of pipe and correct method of design is employed, it will meet the requirements of OSHA 29 CFR 1910.23 load standards.

Decorative Expanded metal is by nature providing possibility of shielding all or part of the area exposed to sun light while allowing the passage of air and has advantage to adding an aesthetic and architectural value to various applications.Unique patters of Infra Mesh reduce the solar gain through blocking direct sun rays as it moves through the day and allowing the sufficient light. Such unique feature of Infra Mesh helps in utilization of more natural resources for LEED certification and add value by usage of green metal Aluminum.
Application:Our diverse product selection utilizes various opening sizes and shapes that reduce weight while achieving results in light and sound diffusion; security.The aesthetic qualities of Products provide unlimited design possibilities for architects and designers.

• Building Faade , Curtain wall screen.
• Cladding to Exterior Wall.
• Refurbishment of old Building Exterior look.
• External and Interior ceiling.
• Partition wall and as Privacy /Vision Barrier Panel.
• Sunscreen Panel over window and Doors.
• Balustrade Panel, Guard Railings, Signage Panel.

At Chemey , we constantly endeavor to deliver total solution for building products. Saicos wood Coatings are part it.Saicos Colour founded in Sassenberg, Germany in 2002 , a Stain and Paint Manufacturer, with richexperiencein wood chemicals and technical wood coatings.

Saicos specialties areecologically flawless wood protection products likeUV Protective coating, Hardwax Oil , Multi TopGround Coat for Wood and Cork floors and Care Products for all types of wood floors for the professional craftsman, industry and the private skilled do-it-yourselfer.

Saicos also produces ecofriendlyWood waxes(natural oil/wax based), clear, colored transparent and opaque that are durably protecting for all interior woodwork, furniture and other wooden items. The secret is they allow the wood to breathe and create a beautiful, sympathetic, smooth, dirt- and water-repellent and easy to clean surface.All Saicos waxes, stains and paints are micro porous, and will not crack, flake, peel or blister.

Our Wood Finishes are:

• Eco-Friendly Engineered from natural, renewable oils and waxes
• Safe Conforms to strict standards for health and purityapproved even for kids toys
• Beautiful Bring out the natural beauty of your woods
• Durable Bind to wood grain and will not flake, blister, or peel
• Efficient Simple to apply, high coverage products that get the job done fast
• Recognized bySustainable Industries and Green Building Product Dealer

Enviromental Benfits:

• Made mostly from readily renewable, natural ingredients.
• Extremely durable keeps existing flooring in good shape for decades.
• When dry, meets European safety standards for use on childrens furniture and toys and resistance to perspiration and saliva.

Practical Benefits:

• The major benefit of Hardwax Oil is that minor damaged areas or high wear areas can be rebuilt without refinishing the entire floor, saving thousands of dollars. You can even leave the furniture in place!
• Preserves the look and feel of real woodnot a plastic coating.
• Easy to apply just two thin coats for oil based products.
• Will not raise the grain when applied. Therefore no need to sand between coats.
• Thixotropic no brush marks in hot weather.
• Penetrates into the wood surface, keeping it elastic but making it water-resistant. Finished wood wont show water stains.
• Easy to clean just vacuum and damp-mop
• One liter covers about 200 to 250 square feet per coat and requires only 2 coats in most cases.

Our company is highly rated in offering Construction Scaffolding Systems to the clients. Construction Scaffolding Systems are precisely manufactured by team of dexterous professionals utilizing premium grade raw material at technically sound production unit observance in mind the set industry standards. These products are tested and developed in compliance with industry quality standards. Offered range is known for sturdy construction, high strength, corrosion resistance, high efficiency, accurate dimensions and finish standards. These products are obtainable in different specifications as per the requirements of clients.

Features:

• Easy installation
• Corrosion and abrasion resistance
• High strength

Our company has set benchmark in offering Integral Scaffolding to the clients. Integral Scaffolding is manufactured at widely developed manufacturing unit using supreme quality raw material and sophisticated technology under the guidance of experienced technocrats. Offered range is available in different lengths and thickness in accordance with customers specific demands. This product is tested by quality inspectors to ensure a flawless product delivery at clients end. Offered range can be widely used for maintaining, constructing and repairing of buildings.

Features:

• Long service life
• Robust construction
• Quality tested

We are instrumental in providing an extensive range ofFlexiCade-Hard yet Portable Barricadeto our clients across the globe. The offered product is dimensionally accurate with the feature of being easily repositionable. Clients can avail this product in accordance with their specifications at best market prices. This product is totally rust free and do not chip or peel as well. In addition, the product is stringently tested against various parameters, using advanced techniques to make the end product defect-free before it is delivered to clients premises.

Hard yet Portable Barricade :

• FlexiCade is unique portable railing system with easy and fast installation and dismantling

Features:

• Chemey Infrasys developed this concept after studying the need to neatly package temporary railing systems for Large Organized Manufacturing and Service Industries
• FlexiCade main railing system is made of welded Aluminum Extrusion
• FlexiCade has unique interlocking bases with E-Z grab raised handles for positioning, slots for toe boards and 4 receptacles for different railing configurations. The bases can be stacked and wont slide around. The railing is temporarily locked securely into the base with set screws and a hex key or Metal Locking Clip . The bases are of Epoxy color coated primed Mild steel for maintenance free service life

• Safety Features:

  As per site demand, Banners/Flexes/Weld mesh can be fixed for proper Signage or restriction. Reflective straps for Night Identification and Self Limiting Strap for identification during Power Cuts at Night in Extreme condition.

  Standard Size:

  In Multiple of -3.6 mtr * 3 No railing with 4 Base plates, 2 Bends, 2 Coupling, 1 Tee and required Metal locking clips / set screws and a hex key as per our standard complete set.

We offer a full in-house machinery guarding solution including consultation, design, manufacture and installation. All machine guarding is designed and engineered in accordance with the latest standards allows us to provide best practice solutions to guarding applications , therefore providing protection to persons whilst maintaining machine functionality and productivity.The all New Lift out Guarding System Installs Fast and Costs less We offer flexible Perimeter Machine Guarding solutions as both off the shelf or tailored solutions for particular applications.

Features::

• Durable powder coated mild steel, or anodized/powder coated aluminium construction
• A range of heights from 1.4 m to 3.0m or as required.
• Standard mesh size 30 mm * 50 mm * 3.5 mm thick wire
• Post made out of 50 mm* 50 mm slotted square section of required thickness.
• A range of duty ratings for different environments and impact resistance.
• Access options such as hinged or sliding single or double doors, trackless doors and vertical gates.
• A variety of infill materials such as sheet steel, weld-mesh, clear or tinted polycarbonate.
• Locking options such as snap locks, cylinder locks and panic locks.
• Simple assembly and installation.
• A wide range of colours.
• National delivery and installation service to suit demanding production schedules.

Chemey Infrasys supply and install a complete range of both standard and tailored guards to a wide range of machine tools including:

Features::

• Drilling Machine Guards
• Lathe Guards
• Grinder Guards
• Chuck Guards
• Milling Machine Guards
• Saddle Shields
• Lead Screw Guards

Design Support::

Using the latest Computer Aided Design we can generate accurate machinery representations and then overlay the proposed machine guarding solution to illustrate form and function. This is a key feature of our design facility, allowing operators to see the guarding in virtual position prior to installation, highlighting any potential design changes prior to manufacture.This flexibility makes modification of the design easy at any stage of the process, ensuring that all machine guarding meets client expectations, operator requirements and the relevant EN standards.

• Compliant with EN 141223: 2016 and OSHA requirements for assured safe operation
• Built using EnduRail structural pipe fittings for quality assurance
• Products consist of high quality tubing and cast clamps that seamlessly compliment the Companys safety portfolio
• No welded parts so any damage can be easily repaired, keeping the gate operational
• All aluminum structure for corrosion resistance to allow continuous operation even in corrosive environments
• Balanced for ease of operation and minimal number of moving parts for lower maintenance
• Will be supplied part assembled to facilitate on site installation
• Standard Pallet Gate range has been designed to be fully adjustable in width and can accommodate openings and height up to 1.5m .
• Different configurations available to suit the type of operation required.

EnduRail Structural Aluminum Fittings are made from high grade Aluminum Alloy to provide you with a lightweight, corrosion resistant and strong alternative for fabrication of pipe structures. EnduRail fittings offer you flexibility, to be used for a variety of applications from contemporary to industrial; EnduRail fittings are only one-third the weight of cast iron fittings, with about 75% of comparable tensile strength.

Because EnduRail fittings can be easily installed with a hex key and pipe cutters there is no need to weld, thread or drill saving you both time and money. EnduRail is securely locked into place using large recessed setscrews that provide a smooth look to your rail system.

Description::

• EnduRail Fittings are a simple method of constructing tubular structures
• Lightweight
• Corrosive resistant aluminum alloy
• Large set screws resist thread stripping
• Low long term maintenance
• Available for schedule 40 and 80 nominal pipe sizes 1 to 2
• Recessed set screws for a smooth look
• Cost effective alternative to welded rail

Applications::

• Handrails
• Guardrails
• Safety Barriers
• Machinery Guards
• Store fixtures
• Awnings

We offer the best Aluminium Scaffold Tower with Stairway. Developed by making use of supreme quality aluminium and other required basic material. We offer these scaffolds in different heights and sizes that can be customized as per the requirements of the clients.

Features:

• Scaffolding width: 1.35 metre
• Scaffolding length: 1.80 & 2.0 metre
• Working heights can be extended from 4.0 to max. 12.35 m with standard parts
• Comfortable entry into the scaffolding from outside through the wide entry frame stairways with 100 mm deep, non-slip tread surfaces and entry platform
• 200 kg/m loading capacity i.e. depending on platform size from 500 kg to max. 560 kg
• The non slip platform with large size trap door and solid platform rails with toe guard confirm the industrial standards.
• The max. platform heights are limited based on outdoors or enclosed area of application.
• Stabilizers are standard part of supply in working heights above 6 metre.

We are consistent in offering to our clients a premium quality range of Mobile Scaffold Tower. We have developed this range using best quality Aluminium Frames. Customers are availed this range in the most comprehensive and industry leading prices. We have stringently checked this range as per the standards.

Mobile Scaffold Tower with Ladder Frame comprise precision construction based scaffold towers with stabilizers and ladder frames. These are made available by us in scaffolding width of 800 & 1400 mm and in scaffolding lengths of 1.60 , & 2.0 metre . Further, . These have loading capacity of 200 kg/m2 which depends on platform size that can be made available from 260 kg to maximum 560 kg.

Features:

• Scaffolding width: 0.75 metre, 1.35 metre
• Scaffolding length: 1.80 metre, 2.00 metre
• Working heights can be extended from 4.50 metre to max. 13.45 metre with standard parts
• 200 kg/m2 loading capacity, i.e. depending on platform size from 260 kg to maximum 560 kg
• The non slip platform with large size trap door and solid platform rails with toe guard confirm the industrial standards.
• The max. platform heights are limited based on outdoors or enclosed area of application.
• Stabilizers are standard part of supply in working heights above 6 metre.

Mild steel construction.Powder Coated Safety Yellow.Steel spring for self-closing actuation.Designed to fit Hand Rail.Gate requires a stop point at closing side.Universal Clamp can fix on Square or Round tube up to 2 size.Universal mount is designed to fit any hand post angle and direction.Telescoping model adjusts every 2 for versatility.

Mild steel construction.
Powder Coated Safety Yellow.
Steel spring for self-closing actuation.
Designed to fit Hand Rail.
Gate requires a stop point at closing side.
Universal Clamp can fix on Square or Round tube up to 2 size.
Universal mount is designed to fit any hand post angle and direction.
Telescoping model adjusts every 2 for versatility.

Automatic Sliding Gate Operator works as a mechanical device that provides vital support for opening as well as closing of the gates installed at the end of a driveway. We can offer these operators in hydraulic/electromechanical working support as per the operating demands of both swinging and sliding gates.

Features:

• Technically advanced range of automatic gate operators
• Can also be programmed for opening/closing processes through use of wireless remote device
• These make use of very less voltage which makes them also suitable to be operated through support of power generated from solar panels
• Comes with support of battery backup for handling working demands in case of blackouts
• Delivers high push force as well as provides fast operating speeds
• Allows for quick and easy installation
• Delivers smooth acceleration and deceleration support
• Come with multiple operating features that include alarm modes
• Can be set up with LCD user interface

• For remote operating of driveway gates

Till late 90s crowd control was not handled in scientific way and many incidents occurred where people were crushed against and injured by the make shift barrier materials , reaching the point where safety of dignities become prime concern. Chemey had worked hard to understand the need of current situation and designed and developed the barricade system, which allows the control of the crowd without affecting the individual safety and the shows/program.

Designed safe Barrier structures are configured to ensure safest environment for every person present considering the crowd dynamics. We worked together with best educational institutes to carry out required research to make it more effective and efficient for the purpose to serve.

All our barriers are designed and developed with proper technical inputs and extensively tested for ease of use, strength and sliding resistance before it is put in the market. The system is configured for easy transport, rapid and simple set up. Proper set up will allow the control with minimum required crew.

Features:

• Minimum maintenance requirements
• Rust proof
• Durability

Weld Mesh fences are available in square as well as in rectangular mesh finish using steel wire construction. We deliver optimum welded wire mesh fencing solutions as per the specific requirements of the customers.

Available range :

High Security Weld Mesh, Industrial Weld Mesh & Architectural Weld Mesh.

Application Areas:

• Metal mesh
• Reinforcement Mesh
• Mild Steel Welded Mesh
• Galvanized Wire Mesh
• Border fence
• Fence gates
• Fencing Material
• Window grill
• Boundary fencing
• Agricultural fencing
• Fencing net
• Garden fencing
• Security fencing
• Barrier fence
• Fence rails
• Industrial fence
• Tree guard
• Perimeter fencing
• Commercial Fence
• Road Fence
• Airport Fence
• Reservoir Fence

Decorative Expanded Metal Mesh patterns are special patterns for architectural or more decorative applications. These patterns provide an aesthetically pleasing design for building facades , security partitions, sign panels, sunshades, and room panels. While providing security, the pattern helps control light and heat while providing airflow and just the right amount of visibility and/or privacy in certain applications. Expanded Metal patterns are very aesthetically appealing including the unique Expanded Metal Hexagonal Ribbon Mesh pattern. Aluminum expanded metal offers savings in weight and metal, free passage of light, liquid, sound, and air, while providing a decorative or ornamental effect.

Our diverse product selection utilizes various opening sizes and shapes that reduce weight while achieving results in light and sound diffusion; security; flow and filtration of gases, fluids and solids. Expanded Metal also have properties such as load bearing capabilities for walking and working surfaces both horizontally and vertically. Specifications : Aluminum Alloy 8011 H14, Available in standard (raised ) surface.

Workability:Easy to Weld, Cut, and Form with proper equipment.

How is it Measured? :Nominal size of diamond opening, short-way X Strand thickness X width X length.

Applications:

• Building Facades, Claddings , Security Wall, Machinery Guards, Flooring , Walkways, etc.
• Expanded Metal can be used in a variety of applications from flooring to infill panels and many others for commercial industrial and retail use.
• Our diverse product selection utilizes various opening sizes and shapes that reduce weight while achieving results in security; light and sound diffusion; flow and filtration of gases, fluids and solids.
• Expanded Metal also have properties such as load bearing capabilities for walking and working surfaces both horizontally and vertically.

TheVentilated Faadeor Double-skin facadeis a system of building consisting of two skins placed in such a way that air flows in the intermediate cavity.
The ventilation of the cavity can be mostly natural. Apart from the type of the ventilation inside the cavity, the origin and destination of the air can differ depending mostly on climatic conditions, the use, the location, the occupational hours of the building and the HVAC strategy.
In hot climates the cavity may be vented out of the building to mitigatesolar gainand decrease the cooling load.Most used products for ventilated Faade are Solid Sheet cassettes , Perforated Sheets , Dry Stone Cladding and Solid Sheet wide Planks with Suitable Stringers.
Whether for renovation or for new Project , it is always economic aspects that prompt the useof pre-painted aluminum as a material for faade for cladding with ventilation.The reason for selection of ventilated faade includes a variety of design possibility, longevityand very low operating cost during the use of building.

Aluminum tubular construction.
Anodizing or Powder Coated Safety Yellow.
Steel spring for self-closing actuation.
Designed to fit tubular Modular EnduRail handrail or guardrail
Gate does not require a stop point at closing side.
Gate arm can be of any length up to 750 mm for versatility.

nduRail offers a strategic integrated modular Railing and Guard rail solution to meet your safety requirements with absolute confidence for industrial structures, loading docks, walkways, to safety railings in aggressive environments, coastal environments, work platforms and the protection of road bridges and culverts.

EnduRail Structural Fittings Features

• Aesthetic Look and speed rail Design
• Lightweight, Corrosion resistant
• Low Long-Term Maintenance
• Cost Effective Alternative to Welding
• Pipe Fittings use with anypipeincluding aluminum, galvanized steel, stainless steel and black iron.

EnduRail aluminum handrail fittings are made from high-grade Aluminum Alloy to provide you strong alternative for fabrication of pipe structures similar form Kee safety klamp or Slip-on fittings. Combination of EnduRail Aluminum structural fitting forms a versatile, economical, and durable method of building tubular structures. EnduRail railings are only one-third the weight of iron railings, with about 75% of comparable tensile strength.

Because EnduRail Aluminum Pipe Railing Fittings can be easily installed with a hex key and pipe cutters there is no need to weld, thread or drill saving you both time and money. EnduRail is securely locked into place using large recessed setscrews that provide a smooth look to your rail or tubular structure system.

EnduRail Slip on rail fittings provide unlimited options of tubular structure requirement in Guardrails, Safety Barriers, Machinery Guards, Store fixtures, Awnings, Solar Panel Installation and Roof Edge Protection.When EnduRail Structural Fittings are used with correct specification of pipe and correct method of design is employed, it will meet the requirements of OSHA 29 CFR 1910.23 load standards.

EnduRail offers a strategic integrated modular Railing and Guard rail solution to meet your safety requirements with absolute confidence for industrial structures, loading docks, walkways, to safety railings in aggressive environments, coastal environments, work platforms and the protection of road bridges and culverts.

EnduRail Structural Fittings Features

• Aesthetic Look and speed rail Design
• Lightweight, Corrosion resistant
• Low Long-Term Maintenance
• Cost Effective Alternative to Welding
• Pipe Fittings use with anypipeincluding aluminum, galvanized steel, stainless steel and black iron.

EnduRail aluminum handrail fittings are made from high-grade Aluminum Alloy to provide you strong alternative for fabrication of pipe structures similar form Kee safety klamp or Slip-on fittings. Combination of EnduRail Aluminum structural fitting forms a versatile, economical, and durable method of building tubular structures. EnduRail railings are only one-third the weight of iron railings, with about 75% of comparable tensile strength.

Because EnduRail Aluminum Pipe Railing Fittings can be easily installed with a hex key and pipe cutters there is no need to weld, thread or drill saving you both time and money. EnduRail is securely locked into place using large recessed setscrews that provide a smooth look to your rail or tubular structure system.

EnduRail Slip on rail fittings provide unlimited options of tubular structure requirement in Guardrails, Safety Barriers, Machinery Guards, Store fixtures, Awnings, Solar Panel Installation and Roof Edge Protection.When EnduRail Structural Fittings are used with correct specification of pipe and correct method of design is employed, it will meet the requirements of OSHA 29 CFR 1910.23 load standards.

Decorative Expanded metal is by nature providing possibility of shielding all or part of the area exposed to sun light while allowing the passage of air and has advantage to adding an aesthetic and architectural value to various applications.Unique patters of Infra Mesh reduce the solar gain through blocking direct sun rays as it moves through the day and allowing the sufficient light. Such unique feature of Infra Mesh helps in utilization of more natural resources for LEED certification and add value by usage of green metal Aluminum.
Application:Our diverse product selection utilizes various opening sizes and shapes that reduce weight while achieving results in light and sound diffusion; security.The aesthetic qualities of Products provide unlimited design possibilities for architects and designers.

• Building Faade , Curtain wall screen.
• Cladding to Exterior Wall.
• Refurbishment of old Building Exterior look.
• External and Interior ceiling.
• Partition wall and as Privacy /Vision Barrier Panel.
• Sunscreen Panel over window and Doors.
• Balustrade Panel, Guard Railings, Signage Panel.

At Chemey , we constantly endeavor to deliver total solution for building products. Saicos wood Coatings are part it.Saicos Colour founded in Sassenberg, Germany in 2002 , a Stain and Paint Manufacturer, with richexperiencein wood chemicals and technical wood coatings.

Saicos specialties areecologically flawless wood protection products likeUV Protective coating, Hardwax Oil , Multi TopGround Coat for Wood and Cork floors and Care Products for all types of wood floors for the professional craftsman, industry and the private skilled do-it-yourselfer.

Saicos also produces ecofriendlyWood waxes(natural oil/wax based), clear, colored transparent and opaque that are durably protecting for all interior woodwork, furniture and other wooden items. The secret is they allow the wood to breathe and create a beautiful, sympathetic, smooth, dirt- and water-repellent and easy to clean surface.All Saicos waxes, stains and paints are micro porous, and will not crack, flake, peel or blister.

Our Wood Finishes are:

• Eco-Friendly Engineered from natural, renewable oils and waxes
• Safe Conforms to strict standards for health and purityapproved even for kids toys
• Beautiful Bring out the natural beauty of your woods
• Durable Bind to wood grain and will not flake, blister, or peel
• Efficient Simple to apply, high coverage products that get the job done fast
• Recognized bySustainable Industries and Green Building Product Dealer

Enviromental Benfits:

• Made mostly from readily renewable, natural ingredients.
• Extremely durable keeps existing flooring in good shape for decades.
• When dry, meets European safety standards for use on childrens furniture and toys and resistance to perspiration and saliva.

Practical Benefits:

• The major benefit of Hardwax Oil is that minor damaged areas or high wear areas can be rebuilt without refinishing the entire floor, saving thousands of dollars. You can even leave the furniture in place!
• Preserves the look and feel of real woodnot a plastic coating.
• Easy to apply just two thin coats for oil based products.
• Will not raise the grain when applied. Therefore no need to sand between coats.
• Thixotropic no brush marks in hot weather.
• Penetrates into the wood surface, keeping it elastic but making it water-resistant. Finished wood wont show water stains.
• Easy to clean just vacuum and damp-mop
• One liter covers about 200 to 250 square feet per coat and requires only 2 coats in most cases.

Our company is highly rated in offering Construction Scaffolding Systems to the clients. Construction Scaffolding Systems are precisely manufactured by team of dexterous professionals utilizing premium grade raw material at technically sound production unit observance in mind the set industry standards. These products are tested and developed in compliance with industry quality standards. Offered range is known for sturdy construction, high strength, corrosion resistance, high efficiency, accurate dimensions and finish standards. These products are obtainable in different specifications as per the requirements of clients.

Features:

• Easy installation
• Corrosion and abrasion resistance
• High strength

Our company has set benchmark in offering Integral Scaffolding to the clients. Integral Scaffolding is manufactured at widely developed manufacturing unit using supreme quality raw material and sophisticated technology under the guidance of experienced technocrats. Offered range is available in different lengths and thickness in accordance with customers specific demands. This product is tested by quality inspectors to ensure a flawless product delivery at clients end. Offered range can be widely used for maintaining, constructing and repairing of buildings.

Features:

• Long service life
• Robust construction
• Quality tested

We are instrumental in providing an extensive range ofFlexiCade-Hard yet Portable Barricadeto our clients across the globe. The offered product is dimensionally accurate with the feature of being easily repositionable. Clients can avail this product in accordance with their specifications at best market prices. This product is totally rust free and do not chip or peel as well. In addition, the product is stringently tested against various parameters, using advanced techniques to make the end product defect-free before it is delivered to clients premises.

Hard yet Portable Barricade :

• FlexiCade is unique portable railing system with easy and fast installation and dismantling

Features:

• Chemey Infrasys developed this concept after studying the need to neatly package temporary railing systems for Large Organized Manufacturing and Service Industries
• FlexiCade main railing system is made of welded Aluminum Extrusion
• FlexiCade has unique interlocking bases with E-Z grab raised handles for positioning, slots for toe boards and 4 receptacles for different railing configurations. The bases can be stacked and wont slide around. The railing is temporarily locked securely into the base with set screws and a hex key or Metal Locking Clip . The bases are of Epoxy color coated primed Mild steel for maintenance free service life

• Safety Features:

  As per site demand, Banners/Flexes/Weld mesh can be fixed for proper Signage or restriction. Reflective straps for Night Identification and Self Limiting Strap for identification during Power Cuts at Night in Extreme condition.

  Standard Size:

  In Multiple of -3.6 mtr * 3 No railing with 4 Base plates, 2 Bends, 2 Coupling, 1 Tee and required Metal locking clips / set screws and a hex key as per our standard complete set.

We offer a full in-house machinery guarding solution including consultation, design, manufacture and installation. All machine guarding is designed and engineered in accordance with the latest standards allows us to provide best practice solutions to guarding applications , therefore providing protection to persons whilst maintaining machine functionality and productivity.The all New Lift out Guarding System Installs Fast and Costs less We offer flexible Perimeter Machine Guarding solutions as both off the shelf or tailored solutions for particular applications.

Features::

• Durable powder coated mild steel, or anodized/powder coated aluminium construction
• A range of heights from 1.4 m to 3.0m or as required.
• Standard mesh size 30 mm * 50 mm * 3.5 mm thick wire
• Post made out of 50 mm* 50 mm slotted square section of required thickness.
• A range of duty ratings for different environments and impact resistance.
• Access options such as hinged or sliding single or double doors, trackless doors and vertical gates.
• A variety of infill materials such as sheet steel, weld-mesh, clear or tinted polycarbonate.
• Locking options such as snap locks, cylinder locks and panic locks.
• Simple assembly and installation.
• A wide range of colours.
• National delivery and installation service to suit demanding production schedules.

Chemey Infrasys supply and install a complete range of both standard and tailored guards to a wide range of machine tools including:

Features::

• Drilling Machine Guards
• Lathe Guards
• Grinder Guards
• Chuck Guards
• Milling Machine Guards
• Saddle Shields
• Lead Screw Guards

Design Support::

Using the latest Computer Aided Design we can generate accurate machinery representations and then overlay the proposed machine guarding solution to illustrate form and function. This is a key feature of our design facility, allowing operators to see the guarding in virtual position prior to installation, highlighting any potential design changes prior to manufacture.This flexibility makes modification of the design easy at any stage of the process, ensuring that all machine guarding meets client expectations, operator requirements and the relevant EN standards.

• Compliant with EN 141223: 2016 and OSHA requirements for assured safe operation
• Built using EnduRail structural pipe fittings for quality assurance
• Products consist of high quality tubing and cast clamps that seamlessly compliment the Companys safety portfolio
• No welded parts so any damage can be easily repaired, keeping the gate operational
• All aluminum structure for corrosion resistance to allow continuous operation even in corrosive environments
• Balanced for ease of operation and minimal number of moving parts for lower maintenance
• Will be supplied part assembled to facilitate on site installation
• Standard Pallet Gate range has been designed to be fully adjustable in width and can accommodate openings and height up to 1.5m .
• Different configurations available to suit the type of operation required.

EnduRail Structural Aluminum Fittings are made from high grade Aluminum Alloy to provide you with a lightweight, corrosion resistant and strong alternative for fabrication of pipe structures. EnduRail fittings offer you flexibility, to be used for a variety of applications from contemporary to industrial; EnduRail fittings are only one-third the weight of cast iron fittings, with about 75% of comparable tensile strength.

Because EnduRail fittings can be easily installed with a hex key and pipe cutters there is no need to weld, thread or drill saving you both time and money. EnduRail is securely locked into place using large recessed setscrews that provide a smooth look to your rail system.

Description::

• EnduRail Fittings are a simple method of constructing tubular structures
• Lightweight
• Corrosive resistant aluminum alloy
• Large set screws resist thread stripping
• Low long term maintenance
• Available for schedule 40 and 80 nominal pipe sizes 1 to 2
• Recessed set screws for a smooth look
• Cost effective alternative to welded rail

Applications::

• Handrails
• Guardrails
• Safety Barriers
• Machinery Guards
• Store fixtures
• Awnings

We offer the best Aluminium Scaffold Tower with Stairway. Developed by making use of supreme quality aluminium and other required basic material. We offer these scaffolds in different heights and sizes that can be customized as per the requirements of the clients.

Features:

• Scaffolding width: 1.35 metre
• Scaffolding length: 1.80 & 2.0 metre
• Working heights can be extended from 4.0 to max. 12.35 m with standard parts
• Comfortable entry into the scaffolding from outside through the wide entry frame stairways with 100 mm deep, non-slip tread surfaces and entry platform
• 200 kg/m loading capacity i.e. depending on platform size from 500 kg to max. 560 kg
• The non slip platform with large size trap door and solid platform rails with toe guard confirm the industrial standards.
• The max. platform heights are limited based on outdoors or enclosed area of application.
• Stabilizers are standard part of supply in working heights above 6 metre.

We are consistent in offering to our clients a premium quality range of Mobile Scaffold Tower. We have developed this range using best quality Aluminium Frames. Customers are availed this range in the most comprehensive and industry leading prices. We have stringently checked this range as per the standards.

Mobile Scaffold Tower with Ladder Frame comprise precision construction based scaffold towers with stabilizers and ladder frames. These are made available by us in scaffolding width of 800 & 1400 mm and in scaffolding lengths of 1.60 , & 2.0 metre . Further, . These have loading capacity of 200 kg/m2 which depends on platform size that can be made available from 260 kg to maximum 560 kg.

Features:

• Scaffolding width: 0.75 metre, 1.35 metre
• Scaffolding length: 1.80 metre, 2.00 metre
• Working heights can be extended from 4.50 metre to max. 13.45 metre with standard parts
• 200 kg/m2 loading capacity, i.e. depending on platform size from 260 kg to maximum 560 kg
• The non slip platform with large size trap door and solid platform rails with toe guard confirm the industrial standards.
• The max. platform heights are limited based on outdoors or enclosed area of application.
• Stabilizers are standard part of supply in working heights above 6 metre.

Mild steel construction.Powder Coated Safety Yellow.Steel spring for self-closing actuation.Designed to fit Hand Rail.Gate requires a stop point at closing side.Universal Clamp can fix on Square or Round tube up to 2 size.Universal mount is designed to fit any hand post angle and direction.Telescoping model adjusts every 2 for versatility.

Mild steel construction.
Powder Coated Safety Yellow.
Steel spring for self-closing actuation.
Designed to fit Hand Rail.
Gate requires a stop point at closing side.
Universal Clamp can fix on Square or Round tube up to 2 size.
Universal mount is designed to fit any hand post angle and direction.
Telescoping model adjusts every 2 for versatility.

Automatic Sliding Gate Operator works as a mechanical device that provides vital support for opening as well as closing of the gates installed at the end of a driveway. We can offer these operators in hydraulic/electromechanical working support as per the operating demands of both swinging and sliding gates.

Features:

• Technically advanced range of automatic gate operators
• Can also be programmed for opening/closing processes through use of wireless remote device
• These make use of very less voltage which makes them also suitable to be operated through support of power generated from solar panels
• Comes with support of battery backup for handling working demands in case of blackouts
• Delivers high push force as well as provides fast operating speeds
• Allows for quick and easy installation
• Delivers smooth acceleration and deceleration support
• Come with multiple operating features that include alarm modes
• Can be set up with LCD user interface

• For remote operating of driveway gates

Till late 90s crowd control was not handled in scientific way and many incidents occurred where people were crushed against and injured by the make shift barrier materials , reaching the point where safety of dignities become prime concern. Chemey had worked hard to understand the need of current situation and designed and developed the barricade system, which allows the control of the crowd without affecting the individual safety and the shows/program.

Designed safe Barrier structures are configured to ensure safest environment for every person present considering the crowd dynamics. We worked together with best educational institutes to carry out required research to make it more effective and efficient for the purpose to serve.

All our barriers are designed and developed with proper technical inputs and extensively tested for ease of use, strength and sliding resistance before it is put in the market. The system is configured for easy transport, rapid and simple set up. Proper set up will allow the control with minimum required crew.

Features:

• Minimum maintenance requirements
• Rust proof
• Durability

Weld Mesh fences are available in square as well as in rectangular mesh finish using steel wire construction. We deliver optimum welded wire mesh fencing solutions as per the specific requirements of the customers.

Available range :

High Security Weld Mesh, Industrial Weld Mesh & Architectural Weld Mesh.

Application Areas:

• Metal mesh
• Reinforcement Mesh
• Mild Steel Welded Mesh
• Galvanized Wire Mesh
• Border fence
• Fence gates
• Fencing Material
• Window grill
• Boundary fencing
• Agricultural fencing
• Fencing net
• Garden fencing
• Security fencing
• Barrier fence
• Fence rails
• Industrial fence
• Tree guard
• Perimeter fencing
• Commercial Fence
• Road Fence
• Airport Fence
• Reservoir Fence

Decorative Expanded Metal Mesh patterns are special patterns for architectural or more decorative applications. These patterns provide an aesthetically pleasing design for building facades , security partitions, sign panels, sunshades, and room panels. While providing security, the pattern helps control light and heat while providing airflow and just the right amount of visibility and/or privacy in certain applications. Expanded Metal patterns are very aesthetically appealing including the unique Expanded Metal Hexagonal Ribbon Mesh pattern. Aluminum expanded metal offers savings in weight and metal, free passage of light, liquid, sound, and air, while providing a decorative or ornamental effect.

Our diverse product selection utilizes various opening sizes and shapes that reduce weight while achieving results in light and sound diffusion; security; flow and filtration of gases, fluids and solids. Expanded Metal also have properties such as load bearing capabilities for walking and working surfaces both horizontally and vertically. Specifications : Aluminum Alloy 8011 H14, Available in standard (raised ) surface.

Workability:Easy to Weld, Cut, and Form with proper equipment.

How is it Measured? :Nominal size of diamond opening, short-way X Strand thickness X width X length.

Applications:

• Building Facades, Claddings , Security Wall, Machinery Guards, Flooring , Walkways, etc.
• Expanded Metal can be used in a variety of applications from flooring to infill panels and many others for commercial industrial and retail use.
• Our diverse product selection utilizes various opening sizes and shapes that reduce weight while achieving results in security; light and sound diffusion; flow and filtration of gases, fluids and solids.
• Expanded Metal also have properties such as load bearing capabilities for walking and working surfaces both horizontally and vertically.