Other Products / Services #4084407

C Crete HF - Heavy Duty Polyurethane Cementatious Flooring

C Crete HF is a specially formulated, seamless, hygienic, self levelling polyurethane flooring system applied in thickness of 6-9 mm. It possess exceptional flexural strength and impact resistance properties. It has superior abrasion resistance and can withstand a wide range of solvents and chemicals. The flooring comes in matt finish. C Crete HF can also be steam cleaned at higher thicknesses.

Very Tough, very durable finish

Can withstand temperatures upto +1300 C

Ideal for removing stubborn stains by steam cleaning

Better stability to thermal variations

Better scratch resistance

Excellent bond strength

Fast setting time

Good resistance to range of solvents and acids

Compliant with LEED green building VOC norms

Very long lasting service life Very good impact resistance due to higher flexural strength

polyurethane self leveling systems / coatings :

1. clean tech pusl - 2 mm and above high gloss polyurethane self smoothening floor coating
2. clean tech pu 150-pu coating non-yellowing grade which can be applied on top of epoxy coating
3. flex u tuff tc- low build polyurethane top coat, uv stable system, matt finish. mixing ratio 5:1
4. flex u tuff clr -low build polyurethane clear top coating over existing epoxy / pu flooring. mixing ratio is 4:1.
5. clean tech lbc(clear) -low build clear polyurethane coating, non-yellowing, full glossy finish. Mixing ratio 5:1

Injection Grouting systems Epoxy & Cementatious

CLEAN TECH IR(M) Low viscous injection epoxy resin system with high adhesive qualities and exceptional high compressive strength. It can be used in dry and wet conditions

CLEAN TECH SLV 100 - a 100 % solid low viscosity epoxy Healer/Sealer especially formulated to extend the life of concrete surfaces.

Clean Plast ME 101 - An expanding grout admixture for pressure / injection grouting and can be used for grouting of Pre-stressed cable ducts, bearing plates etc.

Manufacturer of Metal Rebuilding systems & Ceramic Repair coatings for Internal lining & Pump Refurbishment :

METAL REPAIR EG : Metal rebuilding system used for repair of metal shafts, worn out parts, to cover up the pin holes in the casings, etc.

manufacturer of clean tech arp (acid resistant pointing) for vitrified or other tiled areas - two component ultimate chemical resistant tile pointing material

clean tech arp is designed for use as chemical resistant pointing material for acid resistant tiles with exceptional chemical resistance. This pointing material clean tech arp is a modified version of chemi tech uc and is extremely popular as a jointing material for use in acid resistant tiles. it has a good track record of 15 years in bulk chemical, api, acid prickling areas, etc.

clean tech arp is designed as an extremely effective pointing material against 33% hcl, 98% sulphuric acid, variety of solvents, concentrated alkalies, and other wide range of chemicals. it is a well proven system. we can supply you this in 5 & 20 kg packs.

CLEAN TECH IR (M) : Low viscous injection resin system

Dosage: Mixing Ratio : ( A : B ) : 8:1 (by weight)

CLEAN TECH SLV 100 : Low viscosity Epoxy Healer/ Sealer for Concrete.

This when applied, goes into the pores of the concrete and blocks the seepage. This has ultra low viscosity, 100 CPS which is almost like water. It can cure under water in the presence of moisture.

Usage : CLEAN TECH SLV 100 is used to fill and seal cavities in structures such as On Bridge decks, Highways, Parking garages, Foundations etc.

chemi floor cr - chemical resistant self smoothing epoxy floor

chemi floor cr is a solvent free, self smoothening, jointless, monolithic, non porous, semi glossy and chemically resistant epoxy flooring which is laid at a thickness of minimum 2 mm. It is based on a special phenolic epoxy resin and a polyamine curing agent system which produces a high cross linked polymer network. This unique system prevents permeation and subsequent attack of the coating by highly aggressive chemicals, allowing the system to be used whenever superior chemical resistance is required. Excellent chemical resistance to wide range of acids, alkalis, solvents

epoxgrout 101 normal pourable epoxy grout having pot life of 15 minutes and compressive strength (14 days) 70 n / mm.

epoxgrout 102 specialized epoxy grout for low heat generation having greater pot life approx. 90 mins. and compressive strength (14 days) 80 n/mm

epoxgrout 103 epoxy grout having high early strength with greater pot life of 60 mins. and compressive strength (1 day) 60 n/mm

CLEAN TECH IPU : Low viscous polyurethane injection system

Dosage : Mixing - Mixing Ratio: ( A : B ) : 2:1 (by weight)

manufacturer of heat resistant specialty coating :

1. corro tech hr 650 high temperature heat resistant coating designed to withstand upto 650 deg. c. this is a silicon resin based coating with aluminium flakes. it meets eil specifications f-12. this product is eil approved
2. chemi tech 450 ht- two component high performance heat resistant coating for protection of metal surfaces from film integrity, corrosion and weathering resistance operating at temperatures upto 400c. low dft corrosion resistant, heat resistant coating based on hybrid silicon resin technology
3. chemi tech ht 200 heat resistant coating - multipurpose epoxy coatings provides hard wearing chemical resistant, easy to clean surface. it has outstanding adhesion, film integrity, up to 175c temperature . it can be applied to horizontal as well as vertical surfaces to forms a very thick film.
4. cerami tech htx- ceramic enhanced high temperature service epoxy ceramic coating - high performance , solvent free, two component ceramic reinforced composite modified blend of epoxy resins, fine ceramic reacted with a curing agent to produce excellent resistance to erosion and corrosion combined for high temperature immersion subjected to extreme corrosive or severe fluid flow condition with optimum physical and mechanical strength. designed to protect chemical and corrosion attack in high temperature surfaces such as pipes, tank linings, pumps, impellers, valves, heat exchangers dealing in hot water, steam, hydrocarbons, acidic and alkaline solutions. it can also be used for internal tank coating for storing refinery intermediate/ petroleum products / hydrocarbon .
5. corro tech hrp 100 (s) third generation single component high performance, high build coating based on methoxy functional inorganic copolymer. it can be applied on st2 surface and can withstand upto 380 deg.c.

manufacturer of top range of chemical resistant coatings :

• chemi tech uc : 100% solid functional ultimate chemical resistant epoxy coating used in floors, steel structures, tank linings, pipelines, splash zones etc. Designed to withstand strong chemicals like 33% hcl, 98% sulphuric acid, conc. Nitric acid, alkalies and variety of solvents. It can be applied both on metal and concrete.
• chemi tech cr 101 : high performance epoxy phenolic coating designed for use where corrosion and chemical resistance is required.
• chemi tech cr 201 : high performance solvent free coating designed for aggressive environments. It gives chemical and corrosion resistance
• chemi tech uw: under water curing epoxy coating.
• clean tech ep a 100% epoxy modified system with pitch, designed for chemical & corrosion protection colour black.
• chemi tech cr 251 : chemical resistant lining used for sewage line
• chemi tech 450 ht- two component high performance heat resistant coating for protection of metal surfaces from film integrity, corrosion and weathering resistance operating at temperatures upto 400c. low dft corrosion resistant, heat resistant coating based on hybrid silicon resin technology
• chemi tech ht 200 heat resistant coating - multipurpose epoxy coatings provides hard wearing chemical resistant, easy to clean surface. It has outstanding adhesion, film integrity, up to 175c temperature . It can be applied to horizontal as well as vertical surfaces to forms a very thick film.
• chemi floor cr - chemical resistant self smoothing epoxy floor - solvent free, jointless, monolithic, non porous, semi glossy and chemically resistant epoxy flooring which is laid at a thickness of minimum 2 mm. It is based on a special phenolic epoxy resin and a polyamine curing agent system

polyurethane decorative flooring deco crete

a unique formulation permits deco crete to be applied in varied multicolor finishes. It is a pu based formulation with excellent gloss and color retention characteristics. This product brings life to conventional epoxy or pu floors and can be worked out in various designer finishes.

it is recommended for application over 2mm self leveling epoxy screed. This screed improves load bearing characteristics besides minimizing undulations.

adavantages:

• excellent gloss and color retention

• jointless and monolithic

• easy to clean and maintain

• can be laid with a designer touch in multiple color choices.

• couples advantages of designer floor (such as marble) with monolithic floors (like epoxy).

• good flexibility and impact cushioning characteristics

WALL TECH 2KWPU - Hygienic Anti Bacterial, Anti Fungal, washable water based Polyurethane Wall Coating

Wall Tech 2KWPU is the higher end, two components; Hygienic Anti Fungal, Anti Bacterial water based, washable water based Polyurethane Wall Coating for highly sterile environments. Being a two component offering, it has much higher life than standard single component products available in the market. Further, it has excellent bacteria and microbial resistance, making it an essential requirement for hospital OTs, ICUs, core pharma areas, five star hotel kitchens or any other area requiring a clean environment

As a finishing coat it has many advantages over conventional solvent based coats such as:

Antifungal, anti bacterial characteristics

Washable

Excellent adhesion to surface

Free from fire hazards

Solvent free

High bond strength

Eco-friendly

Thixotrophic for application on vertical surfaces

Durable

cleantech sa solvent free, thixotrophic non-sag, epoxy adhesives specially formulated to meet the requirement for bonding pre-fabricated concrete and other structural members / segments.

clean tech ba - a solvent free two component bonding agent, based on selected epoxy resins for bonding of structural concrete, new to old concrete. it can be applied on floor as well as vertical surfaces.

clean tech erm epoxy repair mortar for floors, vertical and overhead structures. ideally suited for repairs & joints, pot holes etc.

polyastic pg/gg - a two-component polysulphide based sealant for expansion joints. it has excellent tensile modulus, elongation , bonding and uv and weather resistance.

polyastic pu - a single component, non sag , elastomeric polyurethane based sealant. it cures on exposure to atmospheric humidity to form a resilient elastomer

Cementatious Grouts and Mortars

CLEAN TECH CG 102 - A non shrink, high strength free flow cementatious grout.

c crete md - heavy duty polyurethane cementitious flooring

c crete md is a specially formulated, hygienic, seamless, self leveling polyurethane flooring system applied in thickness of 3-5 mm. It possess exceptional flexural strength and impact resistance properties. It has superior abrasion resistance and can withstand a wide range of solvents and chemicals. The flooring comes in matt finish.

good impact resistance due to higher flexural strength

better scratch resistance

tough, durable finish

lesser chance of cracking

can withstand subzero temperature

fast setting time

compliant with leed green building voc norms

long lasting service life, especially when compared to epoxy

dura screed - high performance polymer modified screed

dura screed is a normal setting, rapid drying eco friendly, hydraulic mineral binder for high performance screeds dura screed mixed with inert materials of assorted grain size from 0 to 6 mm, creates screeds of high dimensional stability and constant moisture stability, guaranteeing hard floors after just 5 days.

can be used both internal & external surfacesrapid curing, can be usable in 5 daysvibration resistant

manufacturer of insuflor 100 - self leveling insulating flooring for protection on ac and dc installations.

insuflor 100 is a self-smoothening, pigmented polymer modified matrix, which is laid at a thickness of 2 mm.

insuflor 100 is joint less, monolithic, smooth, non-porous, hygienic, insulating, chemically resistant and easy- to- clean floor-topping.

it is recommended for application in the following areas

electric / electronics industries

computer rooms

battery rooms/ electrical panel rooms

engineering industries

auto-ancillaries and service stations

laboratories

aerospace and light-engineering industry

picture-tube manufacturing plants

pharmaceutical / chemical industries

Manufacturer of following range of Primers for concrete & concrete protection :

• CLEAN TECH MC PRIMER - All purposferrous, non-ferrous, metals, concrete primer - White colour.It can bond on anodized / GI substrates and can offer excellent corrosion protection. Excellent Primer for roof metal sheets. It also can be used for corrosion protection of reinforce bars.
• CLEAN TECH WB CONPROTEC - Breathable water based coating
• CLEAN TECH SLV 100 - Ultra low viscous sealer
• CLEAN TECH PRIMER(M) solvent fee Epoxy primer

CLEAN TECH RAPIDPLUG : Rapid Curing Cementitious Mortar