Our Products
we offer powder containment booths. Cleanair make powder containment booths are used to control the hazardous emissions of powders, dust or vapors during powder dispensing, product sampling, or bag dispensing, etc., without risk to the operator or environment. The downdraught prevents airborne dusts caused by weighing and dispensing operations rising into the operator's breathing zone. The air forced downwards is extracted at low level into the booth's filtration system where dust particles are contained at each level of filtration prior to being re-circulated back into the booths'' air stream. Powder containment booths cleanair make powder dispensing sampling booths are designed to give mixed air flow stream for product, operator and environmental protection and used to control the hazardous emissions of dust powder during powder dispensing sampling process. 0.3 micron downward air stream deflects air-borne dust away from the operator breathing zone which is caused in handling operation. Dust particle available is being filtered at three levels of filtration prior to being circulated back to the booths air stream. For filling, refilling, weighing & sampling of raw material & components
Clean Air Systems specializes in designing and manufacturing Lab Furniture. Both with minimum and maximum details we can design lab furniture that meet customer specifications. Our range of lab furniture includes: Island Tables, Instrument Tables, Wall Tables, Storage Shelves and Reagent Racks etc. These custom made lab furniture consists of under-bench modular with inner storage shelves, lockable doors, granite working tops, foot rest, reagent racks with power points, water sinks and inlets & outlets etc. Our Lab furniture are made from pre treated galvanized iron sheets, with complete epoxy powder coated finish.
Our range of lab furniture available in standard and custom made sizes to suit difference choice of customer requirement.
Laminar Airflow are used as equipment of local workplaces in medical, pharmaceutical and other institutes with high requirements for air cleanliness in the working zone. Cleanair specializes in designing and creating following types of Laminar Airflows.
Air Shower Entry System high velocity air from jet nozzles ensures efficient scrubbing action necessary to remove particulate matter. Contaminated air then flows through sidewalls of the air shower and flows through pre filters and final HEPA filters.
Sterile Garment Cabinet a positive contribution to maintaining the cleanliness of your controlled cleanroom environment. Cleanroom garments can accumulate particulate contamination during storage and between laundry washes, which in turn may lead to lower product yields and increased product quality issues.
Softwall Clean Room design is commonly used in the microelectronics and medical mold injection industry as well as many others. Cleanair Tent's softwall design allows it to be used as either a totally freestanding room or it can be used in combination with your existing walls and ceiling. Each room comes completely factory prefabricated for minimal on-site erection time and is totally self-contained with all components factory-finished.
Laboratory Fume Exhaust hoods are readily available in metal construction with inner FRP lining or in complete FRP constructions. Heavy-duty and dynamically balanced blower assembly provided in the unit removes smoke fumes odor from any chemical process conducted in the hood. Work surface of these Fume Hoods is equipped with acid proof ceramic lining or with finely polished granite. The front sash is connected to suitably balanced counter weigh for convenient vertical sliding.
Air curtains are the best suited elements to control the indoor climate in all the places where the doors cannot always be closed. The preliminary purpose of these Air Curtains is to disallow the influx of outside air through an opening.
Cleanair Laminar Airflow cabinets are designed and best suited for creation of a bacterial dust free air space. Laminar Airflow Cabinets are used while working in following conditions
Laminar Airflow Cabinets are used as equipment of local workplaces in medical, pharmaceutical and other institutes with high requirements for air cleanliness in the working zone. Cleanair specializes in designing and creating following types of Laminar Airflows.
Model No | Working Area Size In Feet | Overall Equipment Size in MM |
Top Cabinet Size in MM |
Support Stand Size in MM |
(W x D x H) | (W x D x H) | (W x D x H) | (W x D x H) | |
Horizontal Laminar Airflow Benches | ||||
CAH 0600 | 2' x 2' x 2' | 680 x 850 x 1760 | 680 x 850 x 1000 | 680 x 850 x 760 |
CAH 0900 | 3' x 2' x 2' | 980 x 850 x 1760 | 980 x 850 x 1000 | 980 x 850 x 760 |
CAH 1200 | 4' x 2' x 2' | 1280 x 850 x 1760 | 1280 x 850 x 1000 | 1280 x 850 x 760 |
CAH 1800 | 6' x 2' x 2' | 1880 x 850 x 1760 | 1880 x 850 x 1000 | 1880 x 850 x 760 |
Vertical Laminar Airflow Benches | ||||
CAV 0600 | 2' x 2' x 2' | 680 x 800 x 2000 | 680 x 800 x 1240 | 680 x 800 x 760 |
CAV 0900 | 3' x 2' x 2' | 980 x 800 x 2000 | 980 x 800 x 1240 | 980 x 800 x 760 |
CAV 1200 | 4' x 2' x 2' | 1280 x 800 x 2000 | 1280 x 800 x 1240 | 1280 x 800 x 760 |
CAV 1800 | 6' x 2' x 2' | 1880 x 800 x 2000 | 1880 x 800 x 1240. | 1880 x 800 x 760 |
Clean Air has also mastered manufacturing Wall Units for laboratories and medical facilities, which is generally appreciated for its ample space. Designed based on latest technology, these wall units are widely used in laboratory and medical facilities. Not only are these units are available in different sizes, they also accommodate product in an organized manner, thus making it easier for lab attendants and professionals to manage well.
Some of the main features are:
Clean Air offers a wide range of Sink Unit that is used in laboratories and medical facilities. These are extensively used for manually and hygienically washing different laboratory accessories. We also offer these in customized specifications.
Salient features: