High Chemical Company

Esaos, Douala, Cameroon

• MOQ 10 Metric Ton

We are offering polyurethane paints. pressing:once aim at the adhesive face, extruded from inside to outside (eject the bubble), knock on and compact it with the rubber hammer or wooden hammer, 24hours later, it will reach the maximum intensity. packaging:30g aluminum tube, 1l, 15kg, 180kg iron tin(barrel). jd1000 epoxy polyester finish is a two-component solvent polyester finish. It can be applied in the cold and moist environment, especially in the wet and humid areas. The coating is hard and wear-resistant. Large range of colors is available for the customer’s reference and it is applicable to the floor in the light industrial workshop, warehouse, etc. jd-d10 high-solid primer is two-component solvent epoxy resin paintcoating. It has good penetration and sealing power on the porous matrix such as concrete and water whetsone, etc. It can reinforce the substrate strength and provide good adhesion. it is an all-purpose primer for epoxy series paints that can be applied on the surface of concrete, water whetsone, etc. Added into arenaceous quartz or amorphous silica, it can be also used as the undercoat. advantages of the epoxy resin concrete floor paintcoating: 1. Beautiful, seamless, dustproof and easy to clean 2. Have good bonding with the solid base, small shrinkage with good abrasion resistance and durability 3. Have good corrosion-resistance to the general chemicals. 4. Nice appearance, rapid construction and economy. 5. Applicable to the moderate load.

• MOQ 10 Metric Ton

We are offering Polyurethane Vanish. Pressing:once aim at the adhesive face, extruded from inside to outside (eject the bubble), knock on and compact it with the rubber hammer or wooden hammer, 24hours later, it will reach the maximum intensity. Packaging:30g aluminum tube, 1L, 15kg, 180kg iron tin(barrel). JD1000 Epoxy Polyester Finish is a two-component solvent polyester finish. It can be applied in the cold and moist environment, especially in the wet and humid areas. The coating is hard and wear-resistant. Large range of colors is available for the customer’s reference and it is applicable to the floor in the light industrial workshop, warehouse, etc. JD-D10 High-solid Primer is two-component solvent epoxy resin paint/coating. It has good penetration and sealing power on the porous matrix such as concrete and water whetsone, etc. It can reinforce the substrate strength and provide good adhesion. It is an all-purpose primer for epoxy series paints that can be applied on the surface of concrete, water whetsone, etc. Added into arenaceous quartz or amorphous silica, it can be also used as the undercoat. Advantages of the epoxy resin concrete floor paint/coating: 1. Beautiful, seamless, dustproof and easy to clean 2. Have good bonding with the solid base, small shrinkage with good abrasion resistance and durability 3. Have good corrosion-resistance to the general chemicals. 4. Nice appearance, rapid construction and economy. 5. Applicable to the moderate load

• MOQ 10 Metric Ton

We are offering chloroprene rubber adhesive. main ingredients:chloroprene rubber product features:this product is easy to coat and solidify faster, its initial adhesion is strong, solid and durable, and the glue liquid is clear, aromatic, and not contains benzene solvent. product performance:this product is mainly used for the adhesion of aluminum-plastic board, fireproofing board and glued board;it does not matter when exposed to the weather, it is anti-freezing, and has particularly strong durability.it can bond steel, aluminum, copper, rubber, plastic, leather, shoe leather, paper box, fabric, craftwork etc. usage: cleaning:rub away the oiliness, dirt, dust etc on adhesive face, and then polish by sander and dry it. coating:use a brush or scraper to coat the glue evenly on adhesive face from inside to outside(if large area bonding, you had better coat the glue on the two adhesive faces at the same time), retain 5-15minutes(subject to the adhesive layer of non significant hand sticky). pressing:once aim at the adhesive face, extruded from inside to outside (eject the bubble), knock on and compact it with the rubber hammer or wooden hammer, 24hours later, it will reach the maximum intensity. packaging:30g aluminum tube, 1l, 15kg, 180kg iron tin(barrel).