Chengdu Shuhong Equipment Manufacturing Co.,Ltd

• MOQ 1 Piece(s)

The shaft furnace is a kind of vertical furnace with a circular cross section, the lining is refractory materials (silicon carbide bricks), between the silicon carbide bricks and steel cylindrical shell, there are fireproofing bricks and heat insulation refractory materials. The furnace main body is welding part with circle steel welding structure, on the top of the furnace is charging door for charging the cathode and other furnace burden. the fuel can be ng or lpg, if the shaft melting furnace speed is from 10~20th, it shall be equipped with 2 rows of burners or more than 2 rows burners to meet different capacities. At the beginning, the furnace is designed and applied for charge the following mixed materials as per proper percentage: cathode, 1# copper scrap, wasted copper wire and wirebar. Due to its' transformation designation, it can melt the shaped copper and others high conductivity copper, such as the wire and casting bar, 2# copper scrap, etc.

• MOQ 1 Piece(s)

We are offering aluminum rod continuous casting and rolling line. 1. Brief introduction aluminum rod continuous casting and rolling line can produce three kinds of conductive aluminum rods of 15mm, 12mm, 9.5mm. 2. Process flow 2.1 aluminum ingot and scrap aluminum wire-aluminum melting furnace --four-wheel horizontal continuous casting machine- oil-pressure shearer -continuous rolling mill - coiler with dual basket - aluminum rod 2.2. Melt aluminum or melt aluminum molten which is stored in the holding furnace will be injected to four-wheel continuous casting machine through launders. The sectional area of trapezoidal casting ingot is2, 330mmã�â² , scrap aluminum bar is cut by oil-pressure shearer and then acceptable aluminum bars are sent to continuous rolling mill, after emulsion bag, guiding wheel, leading pipe and take-up coiler, the rod will become looping.

• MOQ 1 Piece(s)
• Oxygen-FreeUp-Casting

We are offering oxygen free copper rod up casting line. General introduction the oxygen free copper rod produced by continuous up-casting line is high-conducting electrical material. It has the following characteristics: high conductivity, low oxygen content, excellent elongation. After further processing, the final products can not only be wires and cables, magnetic conductor, enameled wire, but also can be used in others electronic products, such as telecommunications products, etc. Low investment, quick running of the production line, quick return of the capital investment is main feature of this line.

• MOQ 1 Piece(s)

We are offering sh25009.5-25514 aluminum (aluminum alloy) rod continuous casting and rolling line has our patent technology. There are many features as convenient dismantlement, high production efficiency, low energy consumption and good quality of aluminum (aluminum alloy) rod. It can produce aluminum rod and 9.5 mm aluminum alloy rod in the same situation. it adopts process of continuous casting and rolling and produces aluminum (aluminum alloy) rod of 9.5mm from aluminum ingot with the casting sectional area of 2, 330 mmã��ã�â² . The raw material of aluminum rod is common aluminum ingot while the raw material of aluminum alloy rod is aluminum alloy ingot.

• MOQ 1 Piece(s)

We are offering copper rod line sh2500/8-255/12. Brief introduction the simple structure, high production efficiency, low energy consumption and excellent quality are main features of this production line. It adopts the process of continuous casting and rolling. It can produce low oxygen bright copper rod of 8mm by using the copper ingot with the casting sectional area of 2, 330 mmâ² . The raw material is cathode or red copper scrap. The new set replaces of copper rod continuous casting set in upward hauling type and traditional continuous casting and rolling set with 14 stands. It is composed of melting copper refining furnace, four-wheel continuous casting machine, auxiliary machine, rolling mill, copper rod cooling, reverting and take-up unit, emulsion cooling system, lubrication system and electric control system etc. Using red copper scraps, reflection refining furnace should be employed. If raw material is cathode, 8 tons shaft furnace (continuously producing).

• MOQ 1 Piece(s)

The shuhong aluminum shaft melting furnace is a new style speed energy-saving aluminum furnace, which is developed according to the craft characteristics of continuous-casting and continuous-rolling and other continuous fusing crafts. It can be satisfied with the requests of crafts of continuously providing aluminum, which is aluminum's continuous-casting, continuous-rolling, pressure casting, the gathering fusing of gravity casting. All of this can lower the oil expense, decrease the burning damages, increase the quality of products, lower the labor strength, improve the condition of working and increase the productivity. generally speaking, the shuhong aluminum shaft melting furnace is not used alone. It always is used matching with the couple-furnaces heat preservation furnace (refining in furnace) or one-furnace heat preservation furnace (refining on-line), which can reach the purposes of continuous melting, refining, and providing aluminum.

• MOQ 1 Piece(s)

At present, many countries in the world rely on copper scrap regeneration to meet domestic demand at a large extent, and the recovery and utilization of scrap copper has an important meaning, which makes the copper metal resources expanded, whereas, the copper scrap should be purified by refining furnaces. The widely used refining furnaces are: stationary reverberatory furnace, tilting refining furnace and NGL furnace. The principle and process for the 3 furnaces almost the same, but also have their own characteristics, Chengdu Shuhong will design and manufacture according to the different needs of customers. 1.Stationary Reverberatory Furnace 2.Tilting Refining Furnace 3.NGL furnace

• MOQ 1 Piece(s)

We are offering aluminum rod line sh 1600-15. 1. Brief introduciton aluminum rod continuous casting and rolling line can produce three kinds of conductive aluminum rods of 15, 12, 9.5mm. 15mm aluminum rod is produced by 11 rolling stands; 12mm aluminum rod is produced by 13 rolling stands and 9.5mm aluminum rod is produced by 15 rolling stands. 2. Process flow 2.1. Aluminum ingot and scrap aluminum wire - aluminum melting furnace -four-wheel horizontal continuous casting machine -oil hydraulic shearer-continuous rolling mill -oil tank and leading pipe -coiler with dual basket 2.2. Melt aluminum or prepared melt aluminum is injected to four-wheel continuous casting machine through launder and is cast to aluminum bar of 2, 340 mmâ² . Scrap aluminum bar is cut by oil hydraulic shearer and then acceptable aluminum bars are sent to continuous rolling mill. Conductive aluminum rods are sent to coiler with dual basket via oil tank and leading pipe and coiler.