China Xingtai Aoli Chemical Co.,Ltd

HeBei, China

Specifications item test result sn 99.9% as 0.008% fe 0.0025% cu 0.008% pb 0.04% bi 0.015% sb 0.02% cd 0.0008% zn 0.001% al 0.001% our tin ingot with sn 99.9 , sn 99.95 , sn 99.997 , sn 99.99 and also can supply you as your reqeust package detail: 25kg/block , 1000kg/wooden case or as buyers’requirement.

Hdpe property unit typical value mass density g/cm3 0.941-0.959 melt flow rate(190 centidegree /2.16kg) g/10min ≤ 1.0 tensile yield strength mpa ≥ 19.0 flexural modulus mpa ≥ 965 elongation@ break % ≥ 400 impact embrittlement temperature centidegree max -118 dielectric constant 100khz 2.32 1mhz 2.31 loss tangent 100khz max 0.0001 1mhz max 0.0001 volume resistivity ohm-cm min 1x10 15.

Specification. item test method test data data unit mfr(melt flow rate) gb/t 3682 1.5-2.0 g/10min density gb/t 1033 0.917-0.923 g/cm3 tensile break stress gb/t 1040 12 mpa tensile yield stress gb/t 1040 8.3 mpa elongation at break gb/t 1040 500 % haze gb/t 2410 14 %

Epoxy resin e-12(604) eppoxy equiv weight(g/eq) 770-870 softening point(°c) 88-95 viscosity(gardner) j-k organic chloride(eq/100g) ≤ 0.0028 inorganic chloride(eq/100g) ≤ 0.0005 color(fe-co scale) ≤ 4 volatile(%) ≤ 0.2.

Ldpe standard standard melt flow rate(g/10min) (1: 21.6kg) 0.1 9.0-13.0 density(g/cm 3 ) 0.95 0.948-0.951 power ash% 0.01 0.04 tensile strength(mpa) 22 23 elongation at break% 600 600 environmental stress-cracking 1500 1500 ldpe resins are made by high pressure autoclave process and mainly used for blown film extrusion and injection molding applications. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. Ldpe is particularly suitable for applications that require excellent processability and optical proterties.

We offer Paraffin Wax. Specifications fully refined paraffin wax 1) low oil content 2) suitable melting point 3) moderate tensile strength 4) highly stable fully refined paraffin wax specifications items 54# 56# 58# 60# 62# 64# test method melting point 54-56 56-58 58-60 60-62 62-64 64-66 gb/t2539 oil content% 0.5max gb/t3554 needle penetration (25)1/10mm 18max 16max gb/t4985 color(white) +28min +25min gb/t3555 light stability 4max 5max sh/t0404 odor none sh/t0414.

1. Formula: (c2h3cl)n 2. Cas no.: 9002-86-2 3. H.s. Code: 39041090 4. Standard: gb/t 5761-2006 5. Appearance: white powder 6.property :pvc resin is the most widely raw material used in plastic production. It has good chemical stability, corrosion resistance and water resistance. It can be dissolved in acetone, hydrochloric ether, ester and some alcohol. It can offer good solubility, good electrical insulation, thermoplasticity and membrane forming capacity. 7.usage: it is used in the insulation material of pvc tube, panel, hard transparent sheet, foil, disc, pvc monofilament, blow molding product, appliance insulation material. 8.specification: name pvc resin sg5 appearance white powder specifications item result average polymerization 1100-1000 k value 68-66 viscosity(ml/g) 118-107 impunity particle number(piece)≤ 16 surface density, g/ml≥ 0.48 volatile(including water)%≤ 0.40 residue screened:0.25mm screen hole≤ 2.0 0.063mm screen hole≥ 95 pearleye number, grain/400c≤ 20 absorbing volume(g) of elasticizer/100g pvc resin≥ 19 white degree (160, 10minlater), %≥ 78 rudimental chloroethylene volume, ppm≤

Specification: high gloss polypropylene excellent at surface gloss good rigidity and toughness high quality and competitive price test project test methods unit typical values [1] tensile stress gb/t1040-92 mpa 25-35 flexural stress gb/t 9341-2000 mpa 45-55 flexural modulus gb/t9341-2000 mpa 1000-1500 impact strength gb/t1043-93 kj/m 2 ≥8.0 elongation at break gb/t1040-92 % ≥600 heat distortion temperature gb/t1634-2004 °c ≥100 mfr gb/t 3682-2000 g/10min 6-16 testing condition 23±2°c, 50±5%rh non-toxic, tasteless, density is small, the strength, stiffness and hardness heat-resistance than hdpe. It has good performance and high insulation effect, but not by humidity temperature, it will become abrasion resistance, crisp time-varying aging. It is suitable for making general machinery parts, corrosion parts and insulation parts.

1> grade: al99.85, al99.80, al99.70, al99.60, al99.50, al99.90 ect. 2> appearance : silvery white metal grade% al(min%) fe(max%) si(max%) cu(max%) ga(max%) others% al99.85 99.85 0.12 0.08 0.005 0.030 0.030 al99.80 99.80 0.15 0.10 0.01 0.03 0.03 al99.70 99.70 0.20 0.13 0.01 0.03 0.03 al99.60 99.60 0.25 0.18 0.10 0.03 0.03 al99.50 99.50 0.03 0.25 0.02 0.03 0.03 al99.90 99.90 0.50 0.45 0.02 0.05 0.05

Antimony ingot sb-00/sb-0 supply ability: 100mt/per month antimony is a kind of non-ferrous metal, silvery white solid with polish and crisp character. 1. Purity: 99.65%/99.85%/99.99% 2. Pack: 26-28kg/ingot 3. Antimony ingot (sb) 4.antimony ingot cas no.: 7440-36-0 properties antimony in its elemental form is a silvery white, solid that exhibits poor and properties and at low. A, antimony resembles a metal in its appearance and in many of its physical properties, but does not chemically react as a metal. It is reactive with and. Antimony and some of its alloys are unusual in that they expand on cooling. Antimony is geochemically categorized as a, occurring with and the, and the abundance of antimony in the 's crust is estimated at 0.2 to 0.5.

100g-7.5kg magnesium ingots magnesium lngots 99.90-99.98% mg 99.90%min , si 0.025%max , al 0.02%max , fe 0.05%max 7.5kg±0.5 each ingot, 1-1.3mt per magnesium pallet or wooden pallet .size, weight, package can be made according to the buys request. specifications: grades & specifications composition(%) mg fe si ni cu al c mn total impurities %(≥) %(≤) grade 1 99.98 0.002 0.003 0.0005 0.0005 0.004 0.002 0.002 0.005 grade 2 99.95 0.003 0.01 0.001 0.002 0.01 0.003 0.015 0.005 grade 3 99.90 0.04 0.02 0.001 0.004 0.02 0.005 0.03 0.01 grade 4 99.80 0.05 0.03 0.002 0.02 0.05 0.005 0.05 0.05

Captions： sodium silicate (%) technical indicator (na2o+ sio2)% ≥ 99.0 iron(%) ≤ 0.02 modulus 2.2-3.4.

specifications cobalt carbonate 1.cas no.:513-79-1 2.the cobalt(co): 46.5% min , 46% min 3.purple prism crystal powder. cobalt carbonate molecular formula:2coc3.3co(oh)2.xh2o specification: molecular weight:534.74 name of index index the cobalt(co) % ≥ 46 46.5 nickel(ni) % ≤ 0.02 0.008 copper(cu) % ≤ 0.01 0.006 calcium(ca ) % ≤ 0.01 0.005 k+na% % ≤ 0.02 0.005 iron(fe ) % ≤ 0.01 0.002 aluminum(al ) % ≤ 0.02 0.01 magnesium(mg ) % ≤ 0.01 0.002 manganese(mn ) % ≤ 0.01 0.002 properties: purple prism crystal powder. soluble acid and ammonia, it is not soluble in cold water, hot water decomposition.

Specifications cobalt oxalate (coc2o4 ·2h2o) 1. Chemical formula: coc2o4 2h2o 2. Molecular weight: 182.98 3. Property: light pink crystalline powder, soluble in ammonia, insoluble in water 4. Application: used in the manufacture of cobalt powder and cobalt products of other raw materials. 5. Packaging: plastic bag lining, plus woven bag, 25kg / bag 6. Specification: co(≥ %) (≤% ni mn cu ca mg zn fe pb na si cl- h2o 31.5 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.05 0.5 physical index density (hb, g/cm3) 0.20.45 f.s.s.s (μm) 0.52.0

Cobalt oxide co 72%min fe 0.07%max nio 0.5%max so42- 0.05%max cu 0.3%max alkali and alkaline metal 0.5% max 100 mesh screenings 1%max.

Zirconium Basic Carbonate Molecular Formala: ZrOCO3 Molecular Weight: 167.22 CAS NO: 57219-64-4 Property: white powder Specifications: Zr(Hf)O2 (%) ≥42 Na2O (%) ≤0.15 Fe2O3 (%) ≤0.002 SiO2 (%) ≤0.03 TiO2 (%) ≤0.001.

Cerium Dioxide 99.9% min Product Type：Rare Earth Oxide Content(percent)：99.9% Molecular Formula: CeO2 CAS No.: 1306-38-3 ISO9001 Appearance: Light yellow powder Item Value Standard Testing method TREO% 99.9 >99 GB/T 14635.2 CeO2/TREO% 99.95 >99.9 GB/T 20166.1 La2O 3/TREO% 0.0051

Gadolinium Oxide Molecular Formula: Gd2O3 Molecular Weight: 362.5 CAS：12064-62-9 Appearence: White powder Content: 99.5%, 99.99%, 99.999%

Lanthanum Oxide Molecular Formula: La2O3 Molecular Weight: 325.84 CAS：1312-81-8 Appearence: White powder Item Specification Analytical Instrument La2O3-2N-1 La2O3-3N-2 La2O3-3N-1 La2O3-4N-1 TREO(wt%) ≥ 99.0 ≥ 99.0 ≥ 99.0 ≥ 99.0 Rare Earth(wt%) La2O3/TREO ≥ 99.0 ≥ 99.5 ≥ 99.9 ≥ 99.99 ICP Spectrograph CeO2/TREO ≤ 0.30 ≤ 0.05 ≤0.03 ≤0.005 Pr6O11/TREO ≤0.025 ≤0.010 ≤0.005 ≤0.002 Nd2O3/TREO ≤0.025 ≤0.010 ≤0.005 ≤0.001 Sm6O3/TREO ≤0.02 ≤0.004 ≤0.004 ≤0.001 Y2O3/TREO ≤0.01 ≤0.001 ≤0.001 ≤0.001 Non-Rare Earth Impurities(wt%) Fe2O3 ≤0.01 ≤0.01 ≤0.008 ≤0.0005 Atomic Absorption Spectrophotometer CaO ≤0.08 ≤0.10 ≤0.08 ≤0.0002 CI- ≤0.05 ≤0.05 ≤0.05 ≤0.0005 SiO2 ≤0.03 ≤0.05 ≤0.02 ≤0.0002 L.O.I. ≤3.0 ≤2.5 ≤2.5 ≤2