Dongli Chemical

• MOQ 24000 Cubic Meter

We are offering strong base anion resin. Polymer matrix structure______________ styrene crosslinked with dvb physical form and appearance__________ clear spherical beads whole bead count___________________ 95% min. functional groups____________________ r-n(ch3)3+ ionic form , as shipped________________ cl total exchange capacity, cl- form, wet, volumetric__________________________ 1.1 eql min. moisture retention, cl- form___________ 50-60% particle size range___________________ 0.3-1.25mm swelling cl- oh-__________________ 20-30% shipping weight (approx.)_____________ 660-710 gl specific gravity, moist cl- form_______ 1.08 ph range, stability___________________ 0 - 14.

• MOQ 20 Metric Ton

We are offering nsf certified strong acid cation exchange resin.

• MOQ 20 Metric Ton

We are offering strong acid cation exchange resin, na h form, industry water softening, deionization.

• MOQ 20 Cubic Meter

Sac resin, styrene crosslinked with dvb, cation resin nah. 001x7 is intended for use in all water softening, dealkalization, deionization and chemical processing applications. typical physical & chemical characteristics polymer matrix structure______________ styrene crosslinked with dvb physical form and appearance__________ clear spherical beads whole bead count___________________ 97% min. functional groups____________________ r-so3¯ ionic form, as shipped________________ na total exchange capacity, na+ form, wet, volumetric__________________________ 1.9 meql min. moisture retention, na+ form___________ 48-52% particle size range___________________ 0.3-1.20mm bigger than 1.2 mm 1.0% max less than 0.3mm 1.0 %max uniformity coefficient 1.7 max. swelling na+→ h+___________________ 10% max. shipping weight (approx.)_____________ 800 gl specific gravity, moist na+ form_______ 1.29 ph range, stability___________________ 0 - 14 suggested operating condition maximum temperature na+ form__________________ h+ form__________________ 150°c (300of) max. 100°c (212of) max. minimum bed depth_________________ 0.6m(24inches) backwash rate______________________ 25 to 50% bed expansion regenerant concentration sodium cycle_____________ 4% to 6% nacl regenerant flow rate ________________ 4 to 12 bvh (0.5 to 1.5gpmcuft.) regenerant contact time _____________ at least 30 minutes regenerant level ____________________ 112 -300gl (4 to 10 pounds cuft.) displacement rinse rate ______________ same as regenerant flow rate displacement rinse volume ___________ 10 to 15 gallonscu.ft. fast rinse rate ______________________ same as service flow rate fast rinse volume ___________________ 35 to 60 gallonscu.ft. service flow rate ___________________ 10-25mh (2 to 10 gpmcuft.)

• MOQ 20 Cubic Meter

001x8 is a high purity premium grade, high capacity, gelular, sulfonated, polystyrene cation resin supplied in the sodium or hydrogen form as moist, tough, uniform, spherical beads. 001x8 is intended for use in all water softening, dealkalization, deionization and chemical processing applications. Typical physical & chemical characteristics polymer matrix structure______________ styrene crosslinked with dvb physical form and appearance__________ clear spherical beads whole bead count___________________ 95% min. Functional groups____________________ r-so3¯ ionic form , as shipped________________ na total exchange capacity, na+ form, wet, volumetric__________________________ 2.0 meql min. Moisture retention, na+ form___________ 45-48% particle size range___________________ 0.4-1.25mm swelling na+→ h+___________________ 10% max. Ca2+→na+__________________ 5% max. Shipping weight (approx.)_____________ 820 gl specific gravity, moist na+ form_______ 1.29 ph range, stability___________________ 0 - 14.

• MOQ 10 Cubic Meter

We are offering cation resin to purolite c100x10. __ na total exchange capacity, na+ form, wet, volumetric__________________________ 2.2 eql min. Moisture retention, na+ form___________ 40-46% particle size range___________________ +1.2 mm

• MOQ 20 Cubic Meter

201x4 is a high capacity, shock resistant, gelular, type i, strongly basic anion exchange resin supplied in the chloride or hydroxide form as moist, tough, uniform, spherical beads. 201x4 is intended for use in all type of deionization systems and chemical processing applications and is especially suited for use in regenerable mixed beds. It also shows good kinetics of exchange, enabling very low concentration levels of both strong and weak acid anions to be achieved at practical flowrates. Typical physical & chemical characteristics polymer matrix structure______________ styrene crosslinked with dvb physical form and appearance__________ clear spherical beads whole bead count___________________ 95% min. Functional groups____________________ r-n(ch3)3+ ionic form , as shipped________________ cl total exchange capacity, cl- form, wet, volumetric__________________________ 1.1 eql min. Moisture retention, cl- form___________ 50-60% particle size range___________________ 0.3-1.25mm swelling cl-→ oh-__________________ 20-30% shipping weight (approx.)_____________ 660-710 gl specific gravity, moist cl- form_______ 1.08 ph range, stability___________________ 0 - 14.

• MOQ 20 Cubic Meter

201x7 is a high capacity, shock resistant, gelular, type i, strongly basic anion exchange resin supplied in the chloride or hydroxide form as moist, uniform, spherical beads. 201x7 is intended for use in all type of deionization systems and chemical processing applications. Typical physical & chemical characteristics polymer matrix structure______________ styrene crosslinked with dvb physical form and appearance__________ clear spherical beads whole bead count___________________ 95% min. Functional groups____________________ r-n(ch3)3+ ionic form , as shipped________________ cl total exchange capacity, cl- form, wet, volumetric__________________________ 1.30 meql min. Moisture retention, cl- form___________ 45-52% particle size range___________________ 0.3-1.25mm swelling cl-→ oh-__________________ 18-20% shipping weight (approx.)_____________ 670-720 gl specific gravity, moist cl- form_______ 1.09 ph range, stability___________________ 0 - 14.

• MOQ 5 Cubic Meter

We are offering anion resin. d201 is a high capacity, shock resistant, macroporous, type I , strongly basic anion exchange resin supplied in the chloride or hydroxide form as moist, tough, uniform, spherical beads. D201 has a high operating capacity, especially on high-fma feedwaters, as well as a high reversible sorptive capacity for complex organic materials, such as the fulvic and humic acids which occur in many surface water supplies. It is recommended for use in waters with low silica loads. For high silica waters, a type 1 anion resin such as pure d201 is recommended. Typical physical & chemical characteristics polymer matrix structure______________ styrene crosslinked with dvb physical form and appearance__________ opaque beads whole bead count___________________ 95% min. Functional groups____________________ r-n(ch3)2(c2h4oh)+ ionic form , as shipped________________ cl total exchange capacity, cl- form, wet, volumetric__________________________ 1.2 eql min. Moisture retention, cl- form___________ 47-57% particle size range___________________ +1.2 mm

• MOQ 5 Cubic Meter

d202 is a high capacity, shock resistant, macroporous, type ii , strongly basic anion exchange resin supplied in the chloride or hydroxide form as moist, tough, uniform, spherical beads. D202 has a high operating capacity, especially on high-fma feedwaters, as well as a high reversible sorptive capacity for complex organic materials, such as the fulvic and humic acids which occur in many surface water supplies. It is recommended for use in waters with low silica loads. For high silica waters, a type 1 anion resin such as d202 is recommended. Typical physical & chemical characteristics polymer matrix structure______________ styrene crosslinked with dvb physical form and appearance__________ opaque beads whole bead count___________________ 95% min. Functional groups____________________ r-n(ch3)2(c2h4oh)+ ionic form , as shipped________________ cl total exchange capacity, cl- form, wet, volumetric__________________________ 1.2 meql min. Moisture retention, cl- form___________ 48-55% particle size range___________________ 0.3-1.2 mm (16-50 mesh) swelling cl-→ oh-__________________ 10% max shipping weight (approx.)_____________ 680-730 gl ph range, stability___________________ 0 - 14