Getein Biotechnology

INTENDED USE The troponin I（cTnI) Quality Control is intended for in vitro diagnostic use in the Quality Control of Cardiac Troponin I on Immunoassay systems. SIZE Level 1 2 x 1ml Level 2 2 x 1ml Level 3 2 x 1ml PREPARATION FOR USE 1. Recover this product to room temperature, then open the vial carefully in case of the loss of content. 2. Dissolve the control material with 1 ml distilled water each vial. 3. Shake the vial gently to dissolve the content thoroughly. Violent shaking should be avoided. 4. Keep it at room temperature for 5 minutes prior use. STORAGE AND STABILITY UNOPENED: This product will be stable for 18 months when stored tightly at -20°C. OPENED: Once the control is thawed and opened, all analytes will be stable for 7 days when stored tightly capped at room temperature, for 15 days at 2 to 8°C and for at least 6 months at -20 to -70°C. APPLICABLE INSTRUMENT FIA8000 Quantitative Immunoassay Analyzer ASSIGNED VALUES The average test results by FIA8000 Quantitative Immunoassay Analyzer and detailed data by more than 10 instruments are contained in this instruction. You can find the corresponding data based on your device.

We are offering ck-mb quality control. Intended use. The ck-mb quality control is intended for in vitro diagnostic use in the quality control of creatine kinase mb (ck-mb) on immunoassay systems. size level 1 2 x 1ml level 2 2 x 1ml level 3 2 x 1ml preparation for use 1. Recover this product to room temperature, then open the vial carefully in case of the loss of content. 2. Dissolve the control material with 1 ml distilled water each vial. 3. Shake the vial gently to dissolve the content thoroughly. Violent shaking should be avoided. 4. Keep it at room temperature for 5 minutes prior use. storage and stability unopened: this product will be stable for 18 months when stored tightly at -20°c. Opened: once the control is thawed and opened, all analytes will be stable for 5 days when stored tightly capped at room temperature, for 15 days at 2 to 8°c and for at least 6 months at -20 to -70°c. applicable instrument fia8000 quantitative immunoassay analyzer assigned values the average test results by fia8000 quantitative immunoassay analyzer and detailed data bymore than 10 instruments are contained in this instruction. You can find the corresponding data based on your device.

We are offering nt-probnp quality control. Intended use the nt-probnp quality control is intended for in vitro diagnostic use in the quality control of n-terminal b-type natriuretic peptide precursor (nt-probnp) on immunoassay systems. size level 1 2 x 1ml level 2 2 x 1ml level 3 2 x 1ml preparation for use 1. Recover this product to room temperature, then open the vial carefully in case of the loss of content. 2. Dissolve the control material with 1 ml distilled water each vial. 3. Shake the vial gently to dissolve the content thoroughly. Violent shaking should be avoided. 4. Keep it at room temperature for 5 minutes prior use. storage and stabilityun opened: this product will be stable for 18 months when stored tightly at -20°c. Opened: once the control is thawed and opened, all analytes will be stable for 7 days when stored tightly capped at room temperature, for 5 days at 2 to 8°c and for at least 1 month at -20 to -70°c. applicable instrument fia8000 quantitative immunoassay analyzer assigned values the average test results by fia8000 quantitative immunoassay analyzer and detailed data by more than 10 instruments are contained in this instruction. You can find the corresponding data based on your device.

We are offering myoglobin quality control. Intended use the myoglobin （myo） quality control is intended for in vitro diagnostic use in the quality control of myoglobin (myo) on immunoassay systems. size level 1 2 x 1ml level 2 2 x 1ml level 3 2 x 1ml preparation for use 1. Recover this product to room temperature, then open the vial carefully in case of the loss of content. 2. Dissolve the control material with 1 ml distilled water each vial. 3. Shake the vial gently to dissolve the content thoroughly. Violent shaking should be avoided. 4. Keep it at room temperature for 5 minutes prior use. storage and stability unopened: this product will be stable for 18 months when stored tightly at -20°c. Opened: once the control is thawed and opened, all analytes will be stable for 5 days when stored tightly capped at room temperature, for 15 days at 2 to 8°c and for at least 6 months at -20 to -70°c. applicable instrument fia8000 quantitative immunoassay analyzer assigned values the average test results by fia8000 quantitative immunoassay analyzer and detailed data bymore than 10 instruments are contained in this instruction. You can find the corresponding data based on your device.

We are offering d-dimer quality control. Intended use. the d-dimer quality control is intended for in vitro diagnostic use in the quality control of d-dimer on immunoassay systems. size level 1 2 x 1ml level 2 2 x 1ml level 3 2 x 1ml preparation for use 1. Recover this product to room temperature, then open the vial carefully in case of the loss of content. 2. Dissolve the control material with 1 ml distilled water each vial. 3. Shake the vial gently to dissolve the content thoroughly. Violent shaking should be avoided. 4. Keep it at room temperature for 5 minutes prior use. storage and stability unopened: this product will be stable for 18 months when stored tightly at -20°c. Opened: once the control is thawed and opened, all analytes will be stable for 5 days when stored tightly capped at room temperature, for 15 days at 2 to 8°c and for at least 6 months at -20 to -70°c. applicable instrument fia8000 quantitative immunoassay analyzer assigned values the average test results by fia8000 quantitative immunoassay analyzer and detailed data bymore than 10 instruments are contained in this instruction. You can find the corresponding data based on your device.

We are offering hs-crp quality control. Intended use the hs-crp quality control is intended for in vitro diagnostic use in the quality control of hs-crp on immunoassay systems. size level 1 2 x 0.5ml level 2 2 x 0.5ml level 3 2 x 0.5ml preparation for use 1. Recover this product to room temperature, then open the vial carefully in case of the loss of content. 2. Dissolve the control material with 0.5 ml distilled water each vial. 3. Shake the vial gently to dissolve the content thoroughly. Violent shaking should be avoided. 4. Keep it at room temperature for 5 minutes prior use. storage and stability unopened: this product will be stable for 18 months when stored tightly at -20�°c. Opened: once the control is thawed and opened, all analytes will be stable for 5 days when stored tightly capped at room temperature, for 15 days at 2 to 8�°c and for at least 6 months at -20 to -70�°c. applicable instrument fia8000 quantitative immunoassay analyzer assigned values the average test results by fia8000 quantitative immunoassay analyzer and detailed data by more than 10 instruments are contained in this instruction. You can find the corresponding data based on your device.

We offer gp one step test for nt-probnp. Introduction n-terminal b-type natriuretic peptide precursor(nt-probnp) is secreted from the left cardiac ventricle in response to volume and pressure overload. It's an inactive n-terminal fragment that split from bnp prohormone. gp one step test for nt-probnp is used as an aid in the clinical diagnosis, evaluation and prognosis of heart failure (hf). intended use early detection of patients with heart failure diagnosis and risk stratification of heart failure distinguishing dyspnea caused by heart failure from other diseases monitoring and prognostic assessment of heart failure treatment screening and diagnosis of non-cardiac heart failure patients assisting risk stratification of acs

• fastaccurate

We offer Cardiac Troponin I Fast Test Kit. GP Cardiac Troponin I Fast Test Kit is used as an aid in the diagnosis of myocardial injury such as Acute Myocardial Infarction (AMI), Unstable Angina, Acute Myocarditis and Acute Coronary Syndrome (ACS).

Gp one step test for ck-mbctnimyo is used as an aid in theclinical diagnosis, prognosis and evaluation of myocardial injury such asacute myocardial infarction, unstable angina, acute myocarditis andacute coronary syndrome.

We are offering One Step Test for D-Dimer. Introduction D-Dimer is a marker of endogenous fibrinolysis and should therefore bedetectable in patients with deep-vein thrombosis. GP One Step Test for D-Dimer is used as an aid in the assessment and evaluation of patients suspected of having deep-vein thrombosis orpulmonary embolism. Intended use As an aid in the exclusion of venous thromboembolism (VTE) As an aid in the exclusion of disseminated intravascular coagulation As an aid in the diagnosis of acute coronary syndrome (ACS) As an aid in the diagnosis and prognosis of cerebral infarction As an aid in the diagnosis and prognosis of liver troubles As an aid in the evaluation of coagulation status of pregnancy-induced hypertension Monitoring the thrombolytic therapy.

We are offering GP One Step Test for NT-proBNP/cTnI. Introduction NT-proBNP is secreted from the left cardiac ventricle in response tovolume and pressure overload. Cardiac troponin I (cTnI) is a sensitive and specific indicator of heartmuscle (myocardium) damage. GP One Step Test for NT-proBNPcTnI is used as an aid in the clinicaldiagnosis, prognosis and evaluation of Heart Failure (HF), AcuteMyocardial Infarction (AMI) and Acute Coronary Syndrome (ACS). Intended use �Diagnosis, risk stratification, prognosis of Heart Failure �Diagnosis, risk stratification, prognosis of Acute Coronary Syndrome.