Guangdong Enkong Machinery Co. Ltd

Foshan, China

• MOQ 1 Set(s)

We are offering glass sandblasting machine 1.Brief Description: 1.1The machine has full-automatic and manual functions, equipped with 3 automatically guns and 1 manual gun, 1.2 The nozzles of guns are made of special material which can increase using life. 2. Technical parameter: 2.1 Size (length�width�height): (1) 1500mm: 4800�1500�2300mm (2) 2000mm: 7400�1500�2780mm (3) 2500mm: 7400�1500�3300mm 2.2 Height of conveyor: 550mm 2.3 Height of processing glass:(1)1500mm;(2)2000mm;(3)2500mm 2.4 Speed for sandblasting: 12-15 m2/h (when use Green carborundum) 2.5 Air source of exterior: Air pressure: 0.6~0.8Mpa Air output: 5m3/min 1m3 gas storage and purifying equipment for compressed air are needed. 2.6 Total power: 3.5kw

We are Offering Glass Machine, Glass Polishing Machine, Glass Edging Machine, Glass Edger Machine. a. Technical Specifications (zm8): 1. Processing Glass Thickness: 3～28mm 2. Angle of Arris：45° 3. Min. Size of Glass：120mm×120mm 4. Processing Speed：1.0～5.0 M/min 5. Installed Power: 18.5kw 6. Occupation: 6.9m×1.1m 7. the Dimension of the Main Machine: 3.9m×0.9m×1.5m 8.power Depend On Your Requirement. 9.weight:3200kgs 10.stainless Steel Water Tank 11.the Infeed and Outfeed Adopts Timing Belt to Convey. b.general Information: 1.zm8 is Suitable for Processing Straight-line Edge & 45°arrise On Glass Sheet of Different Sizes and Thicknesses. 2.rough Grinding, fine Grinding of Flat Edge and Rough Grinding of Arris Can Be Finished At One Time. 3. Flat Glass with Same Thickness Can Be Continuously Processed. 4.production Speed is Adjusted By Variator. 5.input and Output Conveyors Adopt Timing Belt Which Can Improve the Stability of Transmission. 6.this Machine is Easy to Operate and Has Good Performance.

We are Offering Glass Machine, Glass Polishing Machine, Glass Beveling Machine, Glass Ebeveler Dger Machine. a.technical Specifications: processing Speed(m/min):0.73~3.65 min.glass Size (mm) :120×120 glass Thickness (a) :3~20mm remain Thickness (b): ≥1.5 bevel Width Bmax:30degree bevel Angle(θ) :3°~30°(θ=arcsin (a-b)/b 7. Size of Whole Machine L×b×h（mm）7780×1250×2550(xm251) 8. Size of Main Part L1×b1×h1（mm）4366×1225×1560(xm251) 9. New Weight（kg）4250(xm251) 10. Power（kw）16.83(xm251) 11. Stainless Steel Water Tank 12. the Infeed and Outfeed Adopts Timing Belt to Convey. b.general Information: 1.1 Xm251 is Designed for Grinding and Polishing a Bevel Edge, with Bottom Edge of Glass with Different Size and Thickness. 1.2 Rough Grinding, fine Grinding, Polishing of Bevel and Grinding of Bottom Edge Can Be Completed in One Time. 1.3 Processing Thickness, Angle and Remaining Thickness Appears On Digital Display. 1.4 the Processing Speed is Adjustable with a Step-less Motor Which Offers a Wide Range of Speed Selection. 1.4 Input and Output Conveyor Adopt Timing Belt Which Can Improve the Transmission Precision. 1.5 It is Easy to Operate and Has Good Performance.

We are offering Glass Machine, Glass Polishing Machine, Glass Beveling Machine, Glass Ebeveler Dger Machine. A technical Specifications: processing Speed(m/min):0.73~3.65 min.glass Size (mm) :120×120 glass Thickness (a) :3~20mm remain Thickness (b): ≥1.5 bevel Width Bmax:30degree bevel Angle(θ) :3°~30°(θ=arcsin (a-b)/b 7.size of Whole Machine L×b×h（mm）8270×1250×2520(xm351) 8.size of Main Part L1×b1×h1（mm）4966×1225×1620(xm351) 9.new Weight（kg）4500(xm351) 10.power（kw）22.83(xm351) 11..stainless Steel Water Tank 12.the Infeed and Outfeed Adopts Timing Belt to Convey. b.general Information: 1.1xm351 is Designed for Grinding and Polishing a Bevel Edge, with Bottom Edge of Glass with Different Size and Thickness. 1.2rough Grinding, fine Grinding, Polishing of Bevel and Grinding of Bottom Edge Can Be Completed in One Time. 1.3processing Thickness, Angle and Remaining Thickness Appears On Digital Display. 1.4. the Processing Speed is Adjustable with a Step-less Motor Which Offers a Wide Range of Speed Selection. 1.4 Input and Output Conveyor Adopt Timing Belt Which Can Improve the Transmission Precision. 1.5 the Grinding Wheels are Indirectly Connected to the Motor By a Belt to Reduce Vibration. 1.6 this Machine Features High Efficiency and Precision, Stable Quality, Easy Operation and Low Wear.

We offer Glass Straight Line Beveler Edging Machine. A.Techinical parameter: Processing speed(m/min):0.73~3.65 Min.glass size (mm) :80*80 Glass Thickness (a) :3~20mm Remain thickness (b): ≥1.5 Bevel width Bmax:30mm Bevel angle(θ) :3°~30°(θ=arcsin (a-b)/B 7.Size of whole machine L×B×H（mm）8900×1250×2550(XM354) 8.New Weight（kg）5500(XM354) 9.Power（kw）25.21(XM354) 10.Stainless steel water tank 12.The infeed and outfeed adopts Timing belt to convey.

We are Offering Glass Straight Line Edging Machine. a.technical Specifications(zm9): 1. Processing Glass Thickness: 3～28mm 2. Angle of Arris：45° 3. Min. Size of Glass：120mm×120mm 4. Processing Speed：1.0～5.0 M/min 5. Installed Power: 18.5kw 6. Occupation: 6.9m×1.1m 7. the Dimension of the Main Machine: 3.9m×0.9m×1.5m 8.power Depend On Your Requirement. 9.weight:3200kgs 10.stainless Steel Water Tank 11.the Infeed and Outfeed Adopts Timing Belt to Convey. 12.wheels Disposal: no.1 Diamond Wheel no.2 Resin Wheel no.3 fine Grinding Wheel 10s40 no.4 Poshing Wheel X081 no.5 Front Arris Resin Wheel no.6 Front Arris 10s40 Wheel (polishing) no.7 Rear Arris Resin Wheel no.8 Rear Arris 10s40 Wheel (polishing) no.9wool Felt Wheel(polishing) b.general Information: 1.zm9 is Suitable for Processing Straight-line Edge & 45°arrises of Glass Sheet with Various Size and Thickness. 2. the Main Base is Made of Cast Iron. 3.glass Thicknesses is Adjusted By a Servomotor and Showed On a Digital Display. 4. a Special Design of the In-feed Section for Controlling the Desired Amount of Glass Removal Without Adjusting Each Spindle Individually. 5. Independent Felt Wheel and the Cerium Water Recirculation System Make the Flat Edge More Shining. 6.input and Output Conveyor Adopt Timing Belt Which Can Improve the Transmission Precision. 7. It is Easy to Operate and Has Good Performance.

We are offering Glass straight-line polishing Machines. 1.Technical Specifications: 1. Processing glass thickness: 3～25mm 2. Angle of arris：45° 3. Min. size of processing glass：80mm×80mm 4. Max.Size of processing glass 5. Processing speed：1.0～5.0 m/min 6. Installed power: 9.15KW 7. Occupation: 5.8m×1.1m 8. The Package size : 3.3m×0.9m×1.5m 9.Weight:1700KGS 10.Stainless steel water tank 11.The infeed and outfeed adopts Timing belt to convey. 12.Huashun Brand Motor(Made-in-China) 13.Wheels disposal has: No.1 diamond wheel No.2 resin wheel No.3 Front arris resin wheel No.4 Rear arris resin wheel 2.General Information: 1.ZM4 is suitable for processing straight-line edge & 45°arrise on glass sheet of different sizes and thicknesses. 2.Rough grinding, fine grinding of flat edge and rough grinding of arris can be finished at one time. 3. It is suitable for rough processing before tempering and the other further processing. 4.Flat glass with same thickness can be continuously processed. 5.this machine is easy to operate and has good performance.

• MOQ 1 Set(s)

We are offering 1.Technical Specifications: 1. Processing glass thickness : 3�19mm 2. Min.size processing glass: 80mm�80mm 3. Processing speed: 0.5�4.5m/min 4. Installation power: 13.6KW 5. Occupation land: 6.6m�length��1.1m�width� 6. Dimension: 3.6m(length) �0.9m(width) �1.5m(height) 7.Power depend on requirement(220V, 60HZ/380V, 50HZ/415V, 50V and so on) 8.Weight:3500KGS 10.Stainless steel water tank 11.The infeed and outfeed adopts Timing belt to convey. 12.Wheels disposal: No.1 Front arris resin wheel No.2 Rear arris resin wheel No.3 Diamond Round (Pencil) wheel No.4 Diamond Round (Pencil) wheel No.5 BK60 polishing wheel No.6 BK120 polishing wheel No.7 BD wheel 2.General Information: 1. ZM7Y can process pencil/OG edging edges of different glass thickness with different shape wheels. 2.Rough grinding, fine grinding and polishing of the pencil edge can be finished at one time. 3. Same thickness of glass sheet can be process continually. 4.The brightness of pencil edge will be close to the original glass after polished. 5. this machine is easy to operate and has good performance.

We are offering Glass Washing Machine, Glass Drying Machine. 1.Brief introduction: 1. QX12 Glass Washer & Drier adopts horizontal structure. It is made up of in-feed, washing, drying, and out-feed sections. 2. The washing speed is adjusted by variable motor. 3. Four pairs of brushers and three pairs of sponge rollers can guarantee reliable performance. 4. The temperature of hot-air can be set in advance. 2.Technical parameter Max. Size: 1100*2000mm Min. size: 100*150mm Processing thickness: 3-15mm Processing speed:0.7-3.5m/min Brusher: 4pairs Sponge roller: 3pairs Power: 8KW Dimension: 3400(L)*1600(W)*1020(H) Weight: 800KG

• MOQ 1 Set(s)

We are Offering Glass Washing and Drying Machinery. 1.brief Introduction: 1.qx16 Glass Washer & Drier Adopts Horizontal Structure. It is Made Up of In-feed, Washing, Drying, and Out-feed Sections. 2.the Washing Speed is Adjusted By Variable Motor. 3.four Pairs of Brushes and Three Pairs of Sponge Rollers Can Guarantee Reliable Performance. 4.the Temperature of Hot-air Can Be Set in Advance. 2.technical Parameter: max. Size: 1500*2100mm min. Size: 150*150mm processing Thickness: 3-15mm processing Speed:0.7-3.5m/min brusher: 4pairs sponge Roller: 3pairs power: 10kw dimension: 4100(l)*2000(w)*1100(h) weight: 900kg

We are Offering Glass Washer and Drier Machinery. 1.brief Introduction: 1.qx25 Glass Washer & Drier Adopts Horizontal Structure and is Used for Cleaning and Drying Glass. 2.it is Made Up of 3 Pairs of Brush. 3.it Can Process Different Glass like Float, Coating By Different Options. 4. the Motor Adjusting the Height, Digital Display, and the Washing Section Can Be Elevated or Lowered as a Whole, and the Max. Hoist Height is 400mm. 2.technical Parameter: 3. Minimal Size of Processing Glass（mm2）：350*350 4. Width of Processing Glass（mm）：350-2500 5. Thickness of Processing Glass（mm）：3-30 6. Transmitting Speed（m/min）：1.0-5m/min 7. Power（kw）:23 8.weight:3500kgs

We are offering Glass Washer and Drier Machine. 1. Brief introduction: QX26 Glass Washer & Drier adopts horizontal structure and is used for cleaning and drying glass. It is made up of 4 pairs of brush, 2 pairs of air knife. It can process different glass like float, coating and LOW-E glass by different options. Washing & Drying sections can rise up to the Maximal height 500mm. PLC Control system 2. Technical parameter: 1. The Max. width of processing glass：2600mm； 2. The Min. size of processing glass：300mm×350mm； 3. The thickness of processing glass：3mm~35mm； 4. Processing speed：1.0m/min~6m/min； 5. Power：39KW； 6. Brusher No.：4pairs 7. The diameter of brusher：Ф180mm.

We are offering Glass Variable Miter Edger Machine. A.Technical Specifications: 1. Processing glass thickness: 3～28mm 2. Miter angle：0°～60° 3. Min size processing glass：80mm×80mm 4. Processing speed：0.75～3.75m/min 5. Installation power: 20.3KW（ZM9J） 6. Dimension: 4.4m(length) ×1.2m(width) ×1.7m(height) (ZM9J) 7.Power depends on your requirement. (380V, 50HZ, 415V, 50HZ, 220V, 60HZ and other) 8.Weight:3500KGS (ZM9J) 9.Stainless steel water tank 10.The infeed and outfeed adopt Timing belt to convey. 4.General Information: 1.this machine is able to grind and polish the miter angle on glass, with bottom edge polishing and rear seaming all at the same time. 2. The control system uses a Mitsubishi PLC control unit. 3. Input and output conveyor adopt timing belt which can improve the transmission precision. 4. The processed glass surface is very bright and smooth, approaching the original glass surface. 5. The miter angle is from 0 to 60 degree.

We are Offering Glass Variable Miter Edger Machinery. a.technical Specifications: 1. Processing Glass Thickness: 3～28mm 2. Miter Angle：0°～60° 3. Min Size Processing Glass：80mm×80mm 4. Processing Speed：0.75～3.75m/min 5. Installation Power: 23.3kw（zm11j） 6. Dimension: 4.86m (length) ×1.2m (width) ×1.7m (height)(zm11j) 8.power Depend On Your Requirement. 9.weight: 4500kgs(zm11j) 10.stainless Steel Water Tank 11.the Infeed and Outfeed Adopts Timing Belt to Convey. Modela 1. this Machine is Able to Process the Miter Edge, Bottom Edge and Arrises On Glass. 2. Input and Output Conveyors Adopt Timing Belt Which Can Improve the Stability of Transmission. 3. the Processed Glass is as Bright as the Original. 4. Different Options: Digital Display, Plc. Model B 1. the Processing of Arris, Bottom Edge and Miter Edge of Glass Can Be Finished At One Time. 2. Input and Output Conveyors Adopt Timing Belt Which Can Improve the Stability of Transmission. 3. the Processed Glass is as Bright as the Original. 4. Different Options: Digital Display, Plc.

We are offering Glass Shaped Edger Machine. 1.Brief Description: 1.1YXM1 Glass Shape Edging Machine is designed for the grinding and polishing of external edges of shaped glass. 1.2By changing the grinding wheel, different edge profiles (flat edge with arris, pencil edge, bevel edge and OG edge) can be processed. 1.3 The height of the spindle is easy to adjust. 1.4 A pneumatic cylinder (included attachment) makes it possible to process round glass automatically. 1.5 The turntable drive motor and worn gear are installed in the base housing. Its speed is adjusted by a step-less motor. 2. Technical parameter: 1. Wheel diameter：Φ150mm （grinding beveling edge） Φ100mm、Φ150mm（grinding circle edge） 2. Rotate speed of working table：0.3 rpm~3rpm 3. Rotate speed of independence turn plate： 0.7 rpm ~7rpm 4. Processing glass thickness： 3 mm ~40 mm 5. Size of processing glass ：Φ100mm~Φ2200mm 6. Bevel angle： 0°~30° 7. Maximum width of bevel B: 35mm (grinding wheel working width: b≤25mm.) 8. Minimum curvature radius of outside circle upon continuous grinding: R30mm. 9. Minimum curvature radius of inside circle: R100mm. 10. Power of installation 2.85KW

We are Offering Glass Inner and External Edging Machine. a.brief Description 1.1 the Machine is Suitable for Grinding and Polishing Inner&external Edges of Shaped Glass. 1.2 By Changing the Grinding Wheel, Different Edge Profiles(flat Edge with Arris, Pencil Edge and Og Edge)can Be Processed. 1.3 the Height of the Spindle is Easy to Adjust. 1.4 a Pneumatic Cylinder (included Attachment) Makes It Possible to Process Round Glass Automatically. b.technical Parameter: environment Temperature：1℃　～ 40℃ relative Air Humidity：≤ 90﹪ applied Vacuum Degree Scope：-0.05 Mpa～-0.1 Mpa water Pressure：0.1 Mpa～0.2 Mpa air Supply Pressure：0.6 Mpa～０.8 Mpa 68l/min glass Thickness: 3 Mm～40 Mm glass External Diameter：φ100 Mm～φ1600 Mm glass Internal Diameter：φ150 Mm～φ600 Mm maximum Radii of Curvature：r75mm rotation Speed of Spindle：2850r/min rotation Speed of Working Table：0.4 R/min～2.0 R/min installation Power：4.2ｋw total Height of the Main Machine：1915 Mm max Rotating Radii：960 Mm height of Working Table：1100 Mm weight：about 850kg

We are offering Glass horizontal drilling machine. 1.General description: 1.1ZJ130 Glass drilling machine is a cold processing machine which is easy to drill holes on sheets of glass and is equipped with upper and lower drilling bit. 1.2An automatic cylinder drives the lower-drill bit while the upper bit is operated by manual. 1.3Holes of different sizes can be achieved with bits of different diameters. 1.4 this machine works efficiently, it has low glass damage and is easy to operate. 2.Technical parameter: 1. Hole Diameter: φ5～φ220㎜ 2. Glass thickness range: 3 ~20 mm 3. Max. size of Processing glass: 2700×2200mm 4. Height of Working Table: 870mm 5. Distance between drilling center and back column:1300 mm 6. Hole at drilling axis and drilling bit connection end: taper k=60°, screw hole G1/2” 7. Size: 750×2200×1700mm (L×W×H) 2200×2500×1700mm (with floating working table) 8. Weight: 1000KG (with floating working table) 9. Power: 4.95Kw (with air compressor 1.5kw)

We are Offering Glass Vertical Drilling Machine. 1. General Description: 1.1lz25 Glass Vertical Drilling Machine is Controlled By Plc. 1.2in Actual Operation, Just Put the Glass On the Transmission Belt, Input Drilling Position Data, Press the Start Button, the Machine Will Automatically Locate Itself and Finish all Drilling Operations, and Stop When the Work is Completed. 3. Its Features are High Drilling Efficiency and Accurate Locating, Suitable for Processing Building and Furniture Glass. 4. this Machine is Equipped with a Moveable Human-machine Interface. 2. Technical Parameter: drilling Diameter：φ4~φ60mm  glass Thickness：3~19mm max. Height of Processing Glass：2500 Mm min. Size of Processing Glass：500*10mm speed of X Axis：1~5m/min speed of Z Axis：1~5m/min drilling Tolerance：±0.5mm size：7000*2020*3620mm drilling Connector： Taper K=60℃；bolt Holeg1/2″ weight： 3000kg power：6.45kw

We are offering Glass Double Edger Machine. 1. Brief introduction: SM2015/25/30/40 is available in different models (from1500mm to 4000mm of width), each of which produced in 20 spindles (10cups wheels per side , and the safety corner cutting is option), differing only in their maximum processing dimensions. Adopt PLC for controlling. SM2015/25/30/40 Glass straight-line double edging machine is suitable for grinding two parallel straight-line edge of flat glass, rough, fine, polishing and corner grinding finished at one time, its feature of high precision, efficiency and stable .the lathe bed use the double straight-line guide rail and ball-bearings, the drive is smooth and reliable. The product adopts the PLC control, speed control by inverter. Set parameter via the Human-machine interface. The operation is easy and convenient. 2. Technical parameter: SM2015/25/30/40 1500mm 120mm 3-19mm 0.5-4.5m/min 45kw 6000KG 3980*3110*1760 2500mm 300mm 3-25mm 0.5-4.5m/min 47KW 7500Kg 4860 *4360 *1760 3000mm 300mm 3-25mm 0.5-4.5m/min 47KW 8000KG 4860*5060*1760 4000mm 300mm 3-25mm 0.5-4.5m/min 47KW 8500KG 4860*6060*1760 3. Wheels position: (From input to output end) ← No. Name Spec. No.1Rough grinding Diamond wheel 150×12×8×8, 80-120 mesh No.2fine grinding Diamond wheel 150×12×8×8, 180mesh No.3 round grinding Resin wheel 150×12×10×10, 240mesh No.4Fine grinding for upper arris Resin wheel 130×12×10×10, 240mesh No.5fine grinding for lower arris Resin wheel 130×12×10×10, 240mesh No.5polishing for upper arris Polishing wheel 10S40 130×60×35 No.7polishing for lower arris Polishing wheel 10S40 130×60×35 No.8 Polishing wheel BK46 150×70×40 NO.9 Polishing wheel BK60 150×70×40 NO.10 Polishing wheel CE-3 150×70×30 No.11 safty corner cutting Diamond wheel 75*12*8*10 240mesh