Guangzhou Yili Trading Co. Ltd

Guangzhou, China

• MOQ 1kg Kilogram
• AppearanceWhite powder

We are offering leveling agents. Brief introduction the flow agent tl88 is a homopolymer of buty1 acrylate (bua) absorbed on silica (sio2). The tl88a is a super fine and dispersal homopolymer of buty1 acrylate (bua) absorbed on silica (sio2). Both can be applicable to any powder coating systems. Tl88a especially good to the transparent powder coating, improving its surface of powder coating. Advantage: 1. it can reduce the extend of the film and eliminate the orange peel and craters of film effectively. Tl88a especially effect on improving the gloss of the film. 2. it is a homopolymer of buty1 acrylate (bua) absorbed on silica (sio2) leveling agent. 3. it don't contain silicon and ketone, have no interference to the adhesion of the powder coating. 4. tl88, tl88a don't contain wetting agent. 5. tl88 and tl88a can be added directly with other component and extruded. 6. the dosage of tl88and tl88a in formulation is about 0.5~1.5%wt, based on total coating. Storage: keep in the cool and dry place, far away from fire. Package: packing with pe bag lined fiber drums, net weight 20kg per carton drum. Warming this material don't contain toxic material, but wear rubber gloves and dust-mask before operation

• AppearanceWhite powder

We offer Thermal Transfer Agent. Description Heat Transfer Agent ZY01 can transfer to coating film surface and form a release layer while the powder coating is cured. It makes the tearing of transfer paper very easily without affecting the pattern effect, and could obtain quite clear transferred pattern. Application and performance 1. The recommended dosage of ZY01 is 0.5~1% of the total formulation weight, but the exact dosage should be confirmed after testing. ZY01 can be pre-mixed with other materials before extrusion. The extruding temperature is the same as that of the general powder coating. 2. The pigment selected for color modulation in the formulation should be weak in transferring property. 3. The production process is: bake the base powder coating until fully cure → stick the transfer paper and vacuuming → bake for a few minutes → tear the paper after cooling. 4. Stick the transfer paper on the film, vacuum it, put in the oven to make the paper cling to the coated film, and then bake at 160～170℃ for another 4～5 minutes. After that, tear the paper after cooling. Package, storage and other cautions 1. Store in a cool and dry place to avoid contacting other chemical products. Seal tightly after using. As this product is irritant to respiratory tract, please wear dustproof mask and glove when operating. 2. Package: 20kgspolyethylene-lined kraft paper-plastic compound bag. 3. Validity will be 1 year under normal temperature.

• AppearanceWhite powder

We offer Wrinkle texture agent. Description AS183 is a kind of metal complex, with strong curing accelerating function, can shorten the curing time, then form the wrinkle texture. Storage stability is not good, high requirements for temperature & rotor speed during the add procedure. Dosage: 3.5~5% of resin, 1.8% of total Adding Method: Extrusion Features: 1. wrinkle powder coating agent 2. Storage stability is not good 3. high requirements for temperature & rotor speed

We are offering anti caking agents. Ss03 is a compund of acrylate polymer and organic compounds. It can decrease melt viscosity, improve dry flow fluidity, avoid powder blocking, anti- agglomeration, make powder ascending rate higher. Replacement of the micronized silica, solve the matting problem. (reason of cluster: low glass transition temperature of resin, or low-temp curing agent effect like dimethylimidazole will lead to low temp of powder glass transition )

• MOQ 1 Kilogram
• AppearanceWhite powder

We are offering anti static agent. Our new developed agent to avoid powder pulsing and blocking of spray gun. With the effect of anti-static, much better than dfa(dry flow additives), oxide c and micronized silica, wax. F19 was the miracle agent to avoid powder pulsing. dosage: 0.3~0.6% adding method: post-bended features: 1.dispersant for metallic powder and pearlescent powder. 2.fix the problem of powder-pulsing and powder-blocking during spraying. 3.anti-static property 4.better effect than dry flow additives, oxide c and micronized silica.

• MOQ 1 Kilogram
• AppearanceWhite powder

We are offering fast curing agent. Low temperature and fast curing agent 301q is a substance with chemical structure of cyclic amidine. It can be applied to epoxy powder coating as a hardener and also to hybrid coating as an accelerant. pplication and performance 1. it is a high activity curing agent in epoxy powder coating to achieve rapidly curing 2. When used in dicyandiamide-cured pure epoxy resin powder or epoxypolyester hybrid powder, 301q is an accelerating agent. 3. The dosage of 301q as curing agent: 0.05-0.2% of the weight of total resin package, storage and other precautions 1. Store in a cool and dry place to avoid contacting other chemical products. Seal tightly after using. As this product is irritant to respiratory tract, please wear dustproof mask and glove when operating. 2. Package: 25kgspolyethylene-lined kraft paper-plastic compound bag. 3. Validity will be 1 year under normal temperature.