Hebei Huachuang M&C Technology Co Ltd

tangshan, China

76-81GHz FMCW High Frequency Radar Level Transmitter -0.12MPa 0120m Continuous Measuring Radar Level Sensor

HCDAR-8X series radar level sensor is a level measuring instrument that uses FMCW (Frequency Modulated Continuous Wave) special millimeter wave technology, with a working frequency of 76-81GHz. Signal output options include 2-wire 4-20mA, 4-wire 4-20mA, or RS485. It has a maximum range of up to 120m and a blind zone of 8cm. The antenna beam angle is about 3°, and its outstanding performance enables accurate measurement of liquids, solids, and powder materials.

Email: sales3@ WhatsApp: +8615027566496

IP68 0.5%-1.0% 4-20mA Ultrasonic Water Level Meter Ultrasonic Liquid Level Sensor

Ultrasonic level transmitter is a non-contact, high-reliability, cost-effective, and easy-to-install and maintain level measurement instrument. It is a low-cost measuring device for measuring liquids, slurries and solids at industrial sites. It is widely used in water treatment, municipal, chemical, metallurgical, and mechanical manufacturing industries.

Email: sales3@ WhatsApp: +8615027566496

-2085 0-350m Submersible Hydrostatic Liquid Transmitter Stainless Steel 304 24VDC Hydrostatic Water Level Transmitter

The input level gauge is based on the principle that the measured hydrostatic pressure is proportional to the height of the liquid. A pressure sensor is used to convert the pressure signal into an electrical signal, which is converted into a standard current signal or digital signal after temperature compensation and linear calibration.

It is equipped with a high-quality cable with an air duct; on-site display is available; two types of sensors are available for multiple applications. The imported silicon piezoresistive sensor features high precision and good stability; the ceramic sensor has a large-hole design, offering anti-blocking and anti-corrosion performance. It is directly submerged in the liquid to be tested, making installation simple.

The input-type liquid level meter is suitable for urban water supply and sewage treatment, water conservancy and hydropower monitoring and control, marine and offshore systems, chemical, medical equipment, industrial on-site liquid level measurement and control, water supply and drainage, environmental protection systems, and static pressure level measurement of various media in various industries.

Email: sales3@ WhatsApp: +8615027566496

The HCDAR-3D-30 Millimeter-Wave 3D Scanner is specially designed for enclosed warehouse environments such as silos. It can perform real-time material scanning in normal-temperature silos, tanks, and other storage bins, realizing functions such as static target detection within the spatial range, point cloud data output, spatial scanning imaging, and volume and weight calculation output. It is not affected by harsh environments such as rain, dust, and light.

The HCDAR-3D-30 Millimeter-Wave 3D Scanner uses millimeter-wave signals to conduct all-round, high-precision, non-contact measurement of materials, acquire high-density point cloud data, and automatically calculate information such as height, volume, and mass.

-2085 0-350m Submersible Hydrostatic Liquid Transmitter Stainless Steel 304 24VDC Hydrostatic Water Level Transmitter

The input level gauge is based on the principle that the measured hydrostatic pressure is proportional to the height of the liquid. A pressure sensor is used to convert the pressure signal into an electrical signal, which is converted into a standard current signal or digital signal after temperature compensation and linear calibration.

It is equipped with a high-quality cable with an air duct; on-site display is available; two types of sensors are available for multiple applications. The imported silicon piezoresistive sensor features high precision and good stability; the ceramic sensor has a large-hole design, offering anti-blocking and anti-corrosion performance. It is directly submerged in the liquid to be tested, making installation simple.

The input-type liquid level meter is suitable for urban water supply and sewage treatment, water conservancy and hydropower monitoring and control, marine and offshore systems, chemical, medical equipment, industrial on-site liquid level measurement and control, water supply and drainage, environmental protection systems, and static pressure level measurement of various media in various industries.

80ghz Fmcw Radar Cement Level transmitter rs485 -40-120 radar Water Tank Liquid Level Sensor

HCDAR-8X series radar level sensor is one kind of level measuring instrument which uses FMCW ( Frequency Modulated Continuous Wave ) special millimeter wave technology , the working frequency is 76-81Ghz. The signal output has options : 2 wires 4-20mA, 4 wires 4-20mA or RS485. The max range can reach 120m, and the blind zone of 8cm. The antenna beam angle is about 3, the outstanding performance makes it is workable for the accurate measurement of liquids, solids, and powder materials.

IP67, 6 angle, 80G FMCW radar level sensor, -40 85 C, 0 - 30m water level measurement

The HCDAR-8X series radar level sensor is a level-measuring instrument that uses FMCW (Frequency Modulated Continuous Wave) specialized millimeter wave technology, with an operating frequency of 76 - 81 GHz.Signal output options include 2-wire 4 - 20mA, 4-wire 4 - 20mA, or RS485. It can achieve a maximum measuring range of up to 120m, with a blind zone of 8cm. The antenna beam angle is approximately 3. Its outstanding performance enables accurate measurement of liquids, solids, and powder materials.

IP68 0.5%-1.0% 4-20mA Ultrasonic Water Level Meter Ultrasonic Liquid Level Sensor

Ultrasonic level transmitter is a non-contact, high-reliability, cost-effective, and easy-to-install and maintain level measurement instrument. It is a low-cost measuring device for measuring liquids, slurries and solids at industrial sites. It is widely used in water treatment, municipal, chemical, metallurgical, and mechanical manufacturing industries.

HCDAR-63 series is a 26G high-frequency radar level measuring instrument, outputting 4-20mA/RS485 signals with a maximum range of up to 70 meters. The horn antenna is further optimized and can be added with an air purge function. The new microprocessor can perform signal analysis and processing at a higher rate. The sensor is stable and reliable for measuring various solid particles and powder. A universal flange can be configured to adjust the angle according to the material heap angle to obtain a better echo signal.

0-350m 4-20mA 24VDC Display submersible hydrostatic level transmitter

The input level gauge is based on the principle that the measured hydrostatic pressure is proportional to the height of the liquid. The pressure sensor is used to convert the pressure signal into an electrical signal, which is converted into a standard current signal or digital signal after temperature compensation and linear calibration.

High-quality cable with air duct; can be displayed on site; two sensors are available for multiple applications. The imported silicon piezoresistive sensor has high precision and good stability; the ceramic sensor has a large hole design, anti-blocking and anti-corrosion; it is directly put into the liquid to be tested, and the installation is simple;

Input-type liquid level meter is suitable for urban water supply and sewage treatment, water conservancy and hydropower monitoring and control, marine and marine systems, chemical, medical equipment, industrial on-site liquid level measurement and control, water supply and drainage, environmental protection systems and various industries for static pressure level measurement of a variety of media.

LCD 4-20mA output 0.1%0.2% accuracy water oil differential pressure transmitter sensor

HDCP series Intelligent Differential Pressure Transmitter is a high-performance pressure transmitter with world-leading technology, developed using an internationally advanced monocrystalline silicon pressure sensor and patented packaging process. It adopts a patented double overload protection diaphragm design and internal circuit surge protection design, which can accurately measure gauge pressure, absolute pressure, flow rate, liquid level and density. Designed with a high level of integration and modular circuit technology, it achieves the functions of remote transmission, local zero and full range adjustment.

Therefore, it can be used in the process control fields of petroleum, chemical, metallurgy, electric power, food, papermaking, medicine, machinery manufacturing, scientific experiment and aviation military industries.

IP68 0.5%-1.0% 4-20mA Ultrasonic Water Level Meter Ultrasonic Liquid Level Sensor

Ultrasonic level transmitter is a non-contact, high-reliability, cost-effective, and easy-to-install and maintain level measurement instrument. It is a low-cost measuring device for measuring liquids, slurries and solids at industrial sites. It is widely used in water treatment, municipal, chemical, metallurgical, and mechanical manufacturing industries.

0-10V Water Pressure Sensor High Quality China 4-20mA Pressure Transmitter

Pressure transmitter adopts the imported silicon piezoresistive sensor as the pressure measuring element, which is divided into simple type, sanitary type and industrial type.

The simple type pressure transmitter has Hirschman joint type and integrated cable type, both using a single-chip scheme. This chip is a special signal conditioning chip for pressure transmitters with high integration, high precision and good stability. It features 1-wire digital communication calibration with no potentiometer.

The sanitary type pressure transmitters planar diaphragm design solves the problem of common pressure transmitters being unable to clean dirt and impurities from pressure leading holes. It adopts advanced temperature compensation and nonlinear correction technologies, so it is particularly suitable for applications in food and pharmaceutical industries that require high-level sanitary conditions.

The industrial pressure transmitter adopts a high-performance 24-bit AD converter, with a backlight LCD, optional HART or RS485 communication, and three buttons on the keyboard for easy adjustment.

LCD HART or RS485 Silicon Piezoresistive Pressure Transmitter 0-60MPa Liquid Level Measurement Pressure Sensor

Pressure transmitter adopts the imported silicon piezoresistive sensor as the pressure measuring element, which is divided into simple type, sanitary type and industrial type.

The simple type pressure transmitter has Hirschman joint type and integrated cable type, both using a single-chip scheme. This chip is a special signal conditioning chip for pressure transmitters with high integration, high precision and good stability. It features 1-wire digital communication calibration with no potentiometer.

The sanitary type pressure transmitters planar diaphragm design solves the problem of common pressure transmitters being unable to clean dirt and impurities from pressure leading holes. It adopts advanced temperature compensation and nonlinear correction technologies, so it is particularly suitable for applications in food and pharmaceutical industries that require high-level sanitary conditions.

The industrial pressure transmitter adopts a high-performance 24-bit AD converter, with a backlight LCD, optional HART or RS485 communication, and three buttons on the keyboard for easy adjustment.

HCDAR-8S features a compact structure design, small size, and high precision, suitable for the measurement of liquid media with a maximum range of 16 meters. The sensor adopts a PTFE integrated structure with excellent corrosion resistance.The HCDAR-8X series transmits a microwave signal with a frequency that varies linearly with time, and the signal reflected back when the microwave contacts the material is mixed with the transmitted signal through a "mixer". The difference frequency between the two is proportional to the distance from the radar to the reflector, and the required distance information is obtained through FFT transformation.

26GHz 420mA Corrosion Resistant Liquid Level Transmitter -0.10.3 MPa 0-20m Radar Level Sensor

This HCDAR-6X series adopts a 26G high-frequency radar sensor, with a maximum measurement range of up to 70 meters. The antenna undergoes further optimized processing, and the new microprocessors with higher speed and efficiency can perform signal analysis. The instrument can be used for reactors, solid silos, and very complex measurement environments.

-401200 0-60m 76 81GHz radar level sensor angle 3 IP68 High temperature resistant radar level transmitter

HCDAR-8X series radar level sensor is a level measuring instrument that uses FMCW (Frequency Modulated Continuous Wave) special millimeter wave technology, with a working frequency of 76-81GHz. The signal output has options: 2-wire 4-20mA, 4-wire 4-20mA or RS485. It has a maximum range of up to 120m and a blind zone of 8cm. The antenna beam angle is about 3, and its outstanding performance makes it workable for the accurate measurement of liquids, solids, and powder materials.

IP68 0-30m Guided Wave Radar Level Sensor 420 mA HART Radar Level Transmitter

The guided wave radar level transmitter is used for liquids, solid particles, and small-sized oil tanks, as well as various conductive and non-conductive mediums, such as coal bunkers, ash bins, and oil tanks. It provides continuous measurement of the level of liquids, particles, and slurries. The measurement is not affected by medium type, temperature, inert gas, steam, dust, foam, and so on. Its accuracy can reach 3mm, with a measuring range of up to 30 meters, high temperature resistance of 250 degrees Celsius, and high pressure resistance of 20 kgf.

03m IP68 low dielectric constant liquid guided wave wave radar level transmitter

The guided wave radar level transmitter is used for liquids, solid particles and small-sized oil tanks, all kinds of conductive and non-conductive mediums, such as coal bunkers, ash bins, oil tanks and etc. Guided wave radar level transmitter offers continuous measurement of the level of liquids, particles and slurries. The measurement wont be affected by the medium type, temperature, inert gas, steam, dust, foam and so on. The accuracy could reach 3mm, the measuring range can be 3 meters, high temperature resistance could be 250 centigrade and high pressure resistance can be 20 kgs.

26GHz RS485 Radar Liquid Level Sensor -40250 070m Industrial Tank Level Meter

This HCDAR-6X series adopts a 26G high-frequency radar sensor, with a maximum measurement range of up to 70 meters. The antenna undergoes further optimized processing, and the new microprocessors with higher speed and efficiency can perform signal analysis. The instrument can be used for reactors, solid silos, and very complex measurement environments.

Pressure transmitter adopts the imported silicon piezoresistive sensor as the pressure measuring element, which is divided into simple type, sanitary type and industrial type.

The simple type pressure transmitter has Hirschman joint type and integrated cable type, both use single chip scheme. This chip is the special signal conditioning chip of pressure transmitter with high integration, high precision and good stability. 1-wire digital communication calibration, no potentiometer.

The sanitary type pressure transmitter planar diaphragm design solves the problem that common pressure transmitters are unable to clean the dirt and impurities on pressure leading holes. It adopts the advanced temperature compensation and nonlinear correction technologies, so it is particularly suitable for the applications of food and pharmaceutical industries where high level sanitary conditions are required.

The industrial pressure transmitter adopts high performance 24-bit AD converter, with backlight LCD, HART or RS485 communication as optional, and three buttons on keyboard to fulfill the adjustment easily.

Email: sales3@ WhatsApp: +8615027566496

0-60MPa 0.25%0.5% Accuracy industrial type Pressure transmitter 0-10VDC Pressure sensor

Pressure transmitter adopts the imported silicon piezoresistive sensor as the pressure measuring element, which is divided into simple type, sanitary type and industrial type. The simple type pressure transmitter has Hirschman joint type and integrated cable type, both using a single-chip scheme. This chip is a special signal conditioning chip for pressure transmitters with high integration, high precision and good stability. It features 1-wire digital communication calibration with no potentiometer. The sanitary type pressure transmitters planar diaphragm design solves the problem of common pressure transmitters being unable to clean dirt and impurities from pressure leading holes. It adopts advanced temperature compensation and nonlinear correction technologies, so it is particularly suitable for applications in food and pharmaceutical industries that require high-level sanitary conditions. The industrial pressure transmitter adopts a high-performance 24-bit AD converter, with a backlight LCD, optional HART or RS485 communication, and three buttons on the keyboard for easy adjustment.