Hgmount Asbestos Sheet Co., Ltd.

hengshui, IL, China

We are offering asbestos packing with graphite it is fabricated by asbestos threads impregnated with dry graphite, and the outermost is coated with 100% graphite. It is often applied for high temperatures and pressures and used in pumps and valves for oils, steam, solvent, gas, ammonia, abrasive liquids. product specification: temperature: up to 450��; size: 4.0mm ~ 50mm; packing: 10kg/roll. asbestos packing with graphite and oil asbestos packing treated with lubricant and graphite is suitable for dynamic sealing used in pump, valve for steam, industrial water, air and petroleum oil. product description: temp: up to 350��; specification: 4.0mm ~ 50.0 mm; packing: 10kg/roll. reinforced asbestos packing steel wire reinforced asbestos packing is treated by graphite and rubber. It is suitable for static sealing, such as steam hammer, reactor and steam valve and so on. application: compatible with alkali solution, viscous liquids, water, steam, gas, hot water and salt solution. Product description: specification: 4.0mm ~ 50.0 mm; temp: up to 550��; packing: 10kg/roll.

We are offering high performance oil- resistant paronite is a compressed mixture of long asbestos, oil-resistant synthetic rubber, and heat-resisting filler. Owing to using different oil-resistant synthetic rubbers, this high performance paronite is mainly for ams liquid, seawater, halons, petroleum fractions. It will be operating well in extreme weathers, for it has a wide range of working temperatures from -40�� (-40�h) to +250�� (482�h). specification: thickness: 0.5 - 6.0mm; length: 400mm, 1000mm, 1270mm, 1360mm, 1500mm; width: 400mm, 1000mm, 1270mm, 1500mm; operating condition and application working environment max pressure working temperature connections equipment petroleum fractions, heavy and light oils 16 mpa -40�� to +250�� tongue and groove, hollow-ledge, may seal "smooth" connections at a pressure up to 2.5 mpa pumps, vessels, vehicles, pipelines, compressors, internal combustion engines. Ams liquid 16 mpa -40�� to +100�� seawater 10 mpa -2�� to +50�� halons grades 12, 22, 114b-2 2.5 mpa -50�� to +150�� note: surface roughness rz �� 40 microns. physical and mechanical property item value density 1.5 - 2.0g/cm3 tensile strength (transverse) 20mpa deformation rate (35 mpa) ��12% recoverability (35 mpa) ��30%

General paronite is designed as light duty gasket material. It is a compressed mixture based on chrysotile asbestos fibers, synthetic rubber or natural rubber, sulfur and other modifying additives. It can be found in sealing water, stream, salt solutions and water-based solution. general paronite is fabricated in sheets and can be cut to any size for its good machinability. Its working temperature ranges from -60�� to 450��. paronite sheet specification thickness: 0.3 - 6.0mm; length: 400mm, 1000mm, 1270mm, 1360mm, 1500mm; width: 400mm, 1000mm, 1270mm, 1500mm; colors: white, red, grey, etc. working environment and application working environment max pressure operating temperature view sealable connection equipment superheated fresh water, superheated and saturated steam 4.5 mpa -60�� - to +450�� connection type "tongue and groove", "hollow-ledge", "smooth" couplings are compacted at a pressure of fluid to 4 mpa vessels, valves, pipes, pumps and compressors, other units salt solutions, water-based, gaseous and ammonia 2.5 mpa -40�� to +150�� light and heavy petroleum products 2.3 mpa -60�� to +175�� physical and mechanical properties item value density 1.7 - 1.9g/cm3 tensile strength in the cross section 11.0mpa deformation(35 mpa) 8 - 18% recoverability (35 mpa) ��30%

We are offering asbestos rope - twisted, square and lagging asbestos rope is made of braided asbestos fiber and its section tends to be round, rectangle or square. It is widely used in centrifugal pumps, compressors, vacuum pumps, mixers and ship propeller shaft seals, piston pumps and so on. It has a good thermal conductivity, acid and alkali resistance. Compared with other sealing materials, asbestos rope can be molded into any shape and operates well at extreme temperatures. Especially, it has a ability of halting the spread of fire. note: all asbestos ropes can be reinforced by steel wire, cooper wire, or nickel wire. pure asbestos rope pure asbestos rope is designed for static sealing and operates well at high pressure and temperature working environments. twisted asbestos rope it is manufactured by two or more strands of long asbestos (chrysotile) and widely used as caulking, sealing and heat insulation on thermal installations and heat conduction systems. Ideal working temperature ranges from 250 - 550��. The diameter of the round section is from ��3.0mm to 50mm. product specification: working temp: 250 - 550�� diameter: ��3.0mm to 50mm. packing: 10kg/roll square asbestos rope this asbestos rope is still made of long asbestos fiber yarn and woven into square form with the side of length from 3.0 mm to 50.0mm. Due to good prosperities of heat resistance and low thermal conductivity, it is often used as heat insulation and sealing materials. product specification: working temp: 250 - 550�� side length: 3.0 ~ 50.0mm packing: 10kg/roll asbestos lagging rope asbestos lagging rope has two layers: the outside is braided with dusted asbestos; the inside is filled with ceramic. This thermal insulating material has good elasticity and great flexibility, and is ideal for applications of heating pipelines where need flexures and constant vibration. products specification: temp: up to 650�� size: ��12 - 50mm packing: 10kg/roll asbestos rope is not often made of 100% asbestos. There are three kinds of sealing rope, which are treated with other materials to improve their comprehensive properties. It is also called asbestos packing.

We are offering versatile asbestos cement pipes asbestos cement pipe, length 4m, internal diameter 300mm asbestos cement pipes are made of high-grade cement reinforced by 10% -15% chrysotile. They are still in great grade in construction, electric cable pipes, and industries, for their good properties of long life span, low thermal conductivity, durability, high heat and acid resistance, ease of installation as well as affordability. for different proposes, they can be divided into three types: non-pressure, pressure and cable pipes. non pressure pipe non-pressure asbestos cement pipe is often used in chimneys, drainage systems, wiring and construction fencing. pressure-free pipes comes with the diameters of 100, 150, 200, 250, 300, 400 , 500 mm and lengths of 3950 and 5000mm. asbestos cement pressure pipes at the construction sitepressure pipe pressure asbestos cement pipes are available for transportation, industrial and drinking water (cold or hot), water supply, ventilation and garbage disposal and so on. Pressure pipes are available in diameters of 100, 150, 200, 250, 300, 400, 500mm and lengths in 4000, 5000 mm. cable protective pipe asbestos cement cable protective pipe is characterized by high heat resistance (1500��), good heat dissipation, acid and alkali resistance, non-magnetic, smooth wall with the friction efficient less than 0.3, and easy machinability. When laid under the earth, electric cable pipe will be hardened by the humid earth and its strength will be raised. Its service period can reach 100 years. Three classes cable protective pipes are at stock - class a, class b, and class c. class a: (inside diameter * wall thickness) - 100*10mm, 125*10.5mm, 150*10.5mm, 175*12mm, 200*13mm; length - 4000mm; designed as concrete encapsulation laying. Class b: (inside diameter * wall thickness) - 100*11mm, 125*14mm, 150*14mm, 175*14mm, 200*15mm; length - 4000mm; available for direct buried installation of sidewalks and green belts. Class c: (inside diameter * wall thickness) - 100*14mm, 150*16mm, 200*16mm; length - 4000mm; for areas where overloaded vehicles go through, such as highways, secondary roads

We are offering oil-resistant paronite sheet is a blend of compressed long asbestos fiber, oil-resistant synthetic rubber, heat-resistant filler. It is mainly for c1 ~ c5 hydrocarbons (gas and liquid), coke oven gas. Oil-resistant paronite is manufactured in the form of sheets. Paronite sheet can be cut into pads for its good machinability. specification thickness: 0.4 - 3.0mm; length�� width: 500��500mm; 1700��1000mm; oil-resistant paronite sheets of different colors, available in 0.4 - 3mm thickness operating environment and applications working environment max pressure operating temperature connections equipment heavy and light oil products, petroleum fractions, melting wax 3 mpa up to +300�� "tongue and groove", "hollow-lug" or "smooth" connection - at medium pressure up to 4 mpa vessels, compressors, pumps, valves and control valves, internal combustion engines and other units c1-c5 hydrocarbons (gas and liquid) 2 mpa -40�� to +100�� coke oven gas 6.4 mpa up to +490�� nitrogen and oxygen in gaseous states 5 mpa up to +150�� note: surface roughness rz �� 40 (gost 2789) physical and machinery properties item value density 1.5g/cm3 tensile strength (transverse) 14 mpa deformation rate (35 mpa) 5% - 16 % recoverability��35 mpa�� ��40 % if you need to consult the price, please contact the business department by e-mail: when you contact us, please provide your detail requirements. That will help us give you a valid quotation.

Compressed asbestos gasket is a compressed mixture of long fiber asbestos, synthetic rubber and other modifying materials. According to different formulations, processes and usages, it can be divided into standard and oil-resistant (g2184). According to working temperatures and pressures, it can be also classified into low (g2183), medium (g2182) and high pressure (g2181). They are all available for sealing steam, water, inert gas, oils and other non-aggressive mediums. asbestos gasket is die cut or circle cut from paronite or jointing sheets. Various special specifications are at stock and we can fabricate custom gaskets. size of jointing sheet or paronite: thickness: 0.3 - 6.0mm; length: 1500mm, 1270mm; width: 1360mm; 1270mm; 1500mm. Package: wooden pallet 1000kgs, 2000kgs /each. oil-resistant asbestos gasket various shapes of compressed asbestos gasket for heavy duty technical parameters: item g2183 g2182 g2181 g2184 pressure 2.0mpa 3.5mpa 4.5mpa 4.0mpa temperature 200�� 350�� 450�� 400�� tensile strength 5.0mpa 9.0mpa 18.0mpa 14.0mpa

we are offering acid-resistant paronite sheet, thickness 0.4 mm acid-resistant paronite is highly recommended for equipment in acid environment. it is based on long asbestos fiber, acid-resistant synthetic rubber and sulfur. it is available for organic-based solvents, alkalis, acids and other corrosive liquids and gases. this paronite sheet can be used in any climatic conditions, with a wide range of working temperatures from -60�� (-76�h) to +250�� (+482�h). specification thickness: 0.4 ~ 6.0 mm; length�� width: 4100��1500mm; 3810��12 70mm; 2000��1500mm; 1500��1360mm; 1270��1270mm; 1500��1500mm; packaging packed in boxes (wood, cardboard or metal) or crates lined with water-proof paper. operating condition and application working environment max pressure mpa max temperature �� connection equipment organic-based solvents 1 250 tongue and groove, hollow-ledge, smooth pumps, compressors piping fittings oxidizers, alkalis, acids, and other corrosive liquids and gases 2.5 150 physical and mechanical property item value density 2.0 - 2.5g/cm3 tensile strength (transverse) 10 mpa loss on ignition 25% compressibility (35 mpa) 2% - 12% recoverability (35 mpa) ��30%

We are offering steel wire reinforced paronite. Paronite sheet reinforced by steel wire makes it ideal for operating under high pressures ( up to 10 mpa) and high temperatures( up to 450��). specification thickness: 0.8mm, 1.0mm, 1.2mm, 2.0mm, 3.0mm; length �� width: 400��300mm, 1500��1000mm. packaging packed in boxes (wood, cardboard or metal) or crates lined with water-proof paper. operating environment and application operating environment max pressure (mpa) max temperature(�� c) sealing connections equipment steam (superheated and saturated), fresh water (superheated) 10 450 "tongue and groove", "hollow-ledge" for sealing smooth connections under medium pressure up to 4.0 mpa piping, valves and control valves, pumps, compressors, internal combustion engines and other units dry inert gases, air 7.5 250 light and heavy oil products, oil fractions 7.5 400 physical and mechanical property item value density 1.9-2.5g/cm3 maximum weight increase when exposed for 5 hours: - kerosene at 23 �� c - in aircraft ms-20 oil at a temperature of +150 �� c 8% - 21% 28% loss on ignition 25% compressibility (35 mpa)% 6%~13% recoverability (35 mpa) ��30% pliability no cracks note: surface roughness rz �� 40 microns.

Asbestos cement sheet is weatherproof, durable, corrosion-resist, heat insulating. All these properties contribute it an ideal construction material. three types of asbestos cement products at stock - flat sheet, corrugated sheet and coated corrugated sheet. flat sheet flat sheet is mainly applied for equipment and constructions. In steel making factory, it can be used in vacuum furnace, smelting furnace, heating equipment for its exceptional thermal insulation. In constructions, it can be used in commercial buildings, shopping malls, hotels, factories, warehouses, tunnels, theaters, stations and hospitals. Asbestos cement sheet has a collection of fire insulation, waterproof, noise insulation, physical and technical specifications length 1750 ��10mm width 1110 ��6mm thickness 8-10 ��1.0mm flexural strength �� 18.0 mpa density �� 1.6 g / cm3 impact strength �� 2.0 kj / m2 frost resistance 25 cycles residual strength ��90% corrugated sheet corrugated sheets, or roofing sheets, are widely used in attic roofs, furnace curtain, residence, public and agricultural buildings. physical and technical characteristics length 1750 ��15mm width 1130 ��5mm thickness 5.8 ��0.3mm ordinary wave height 40 ��4.0mm overlapping wave height 40 ��6.0mm overlapped wave height, mm 32 ��6.0mm the width of the overlapping wave 43 ��7.0mm width overlapped wave 37mm step wave 150mm the flexural strength not less than 16.0 density (bulk density) �� 1.6 mpa impact strength �� 1.50kj / m2 frost resistance 25 cycles water resistance �� 24 hours residual strength �� 90% coated sheet coated sheet is coated with colorful polymer which adds fashion elements to buildings, such as attic roofs, schools, theaters and so on. coated asbestos sheet decorate your properties coated asbestos cement corrugated sheet, 1750��1110mm, 5.8mm physical and technical properties length 1750 ��15mm width 1130 ��5mm thickness 5.8 ��0.3mm ordinary wave height 40 ��4.0mm overlapping wave height 40 ��6.0mm overlapped wave height, mm 32 ��6.0mm the width of the overlapping wave 43 ��7.0mm width overlapped wave 37mm step wave 150mm the flexural strength not less than 16.0 mpa density (bulk density) ��1.6 g / cm3 impact strength �� 1.50kj / m2 frost resistance 25 cycles residual strength, % �� 90% adhesion of the polymer coating to the sheeting, mpa �� 1.0 mpa appearance no cracks, bubbles, bundles color fastness �� e (a, b, l) heat resistance of the polymer coating sheets 100% for 2 hours mark on frost resistance f 50, f 75, f 100 no change the look of the polymer coating