Hong Ye Jie Technology Co., Ltd (shenzhe

• MOQ 200 Kilogram
• Hardness (Ao) 28±2
• Viscosity (cps) ≤33000

• MOQ 200 Kilogram

shoe mold silicone rubber using instruction: the component a of shoe mold silicone rubber is white flowing liquid and the component b is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. notes: shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon, mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100:2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.

• MOQ 200 Kilogram

Application: rtv silicone rubber hy-6 series is primarily intended for making molds for poly resin crafts, pu crafts, pu resin crafts , gypsum crafts , unsaturated resin crafts, lighting and candles crafts , plastic toy , stationery gifts crafts industry, a large statue buddha, furniture, furniture decorative materials, statues buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. decirption: silicone rubber for mold making is white or red flowing liquid with general hardness of 22-50aâ°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation. Specification: rtv silicone rubber hy-6 series now including 6 types of rtv silicone rubber: hy615/hy620: low viscosity and hardness, suitable for pouring way for making small molds for soft material like soap, wax. Hy625/hy630: medium viscosity and hardness, suitable for making molds for items like resin stationery, plaster/gypsum moldings, etc. In both pouring and brushing way. Hy638: medium viscosity anf hardness, most suitable for brushing mold making for items like concrete statuaries, concrete pavers, fake rocks, etc. Hy640: low viscosity and high hardness, suitable for pouring mold making for large and simple items such as fake rocks, concrete pavers, conrete fences, etc.

• MOQ 200 Kilogram
• Viscosity (cps)≤16000
• Hardness (A°)20±2

• MOQ 200 Kilogram
• Viscosity(cps) ≤18000
• Hardness(Ao) 38±2

• MOQ 100 Kilogram

We are offering electronic silicone for led encapsulation. electronic silicone for led encapsulation hy-9055 electronic potting compound product feature of encapsulation silicone 9055: hy-9055# is a kind of low viscosity, inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. The flame retardant ul94-v0 level can be achieved. It mainly applied in electronic components surface with materials of pc(poly-carbonate), pp, abs, pvc, etc. And metal materials. typical application: hy-9055# is suitable for - high powered electronics, - dc/dc module and circuit board which requires heat dissipation and high temperature resistance. it can be broadly used for led screen, wind power generator, pcb substrate, etc. technical guidelines: 1, pls put part a and part b in separate container and stir evenly before mixing the two part together. 2, weight ratio: part a: part b = 1:1 3, deaeration the mixture in vacuum pump under 0.08 mpa for 3-5 minutes. 4, the temperature influences the curing time of hy-9055#. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. Suggested operation time and temperature. With temperature of 80~100°c, the silicone will cure in 15 minutes, while in 25°c room temperature, the silicone will cure around 8 hours. warm tips of rtv silicone for electronic encapsulation: 1.the following material may hinder the curing of the product, so pls apply after summary experiment. When necessary, pls clean the application areas. l condensation silicone which not completely cured or organic tin compounds l sulphur, sulfide and sulfur rubber materials. l amine compounds as well as contains the amine materials. l pewters solder flux. 2. Should be sealed storage.the mixture should be used up at once, avoid causing waste. 3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes. 4. When it gets stratified after a period of storage, please mix 9060 evenly before using, it does not affect the performance