Shenzhen, China
Write a Review
Welcome to Hongye Aerospace Company
Manufacturer / Exporter / Supplier Of Glass Fiber FRP Surfacing Mat, Silicone Rubber, Resin, PU Resin, Polyurethane Resin, Glass Fiber Cloth, Epoxy Resin, Composite Material, Unsaturated Polyester Resin, Platinum Cure Silicone Rubber, Fiberglass Cloth, Polyurethane Casting Resin, Glass fiber Chopped Strand Mat, Unsaturated Resin
we are offering Glass Fiber Frp Surface Mat. Description--Glass fiber FRP surfacing mat Glass fiber surface mat is mainly used in the surface layer of glass products. Divided into two categories: specific wound type series (S-SM)and hand lay-type series (S-HM) Characteristic--Glass fiber FRP surfacing mat Fiber distribution evenly, finished products with smooth surface, corrosion resistance, low binder content, volt mode is good Application--Glass fiber FRP surfacing mat Wound glass fiber mat is mainly applied to the surface of the pipe and tank wrap products, it can improve product surface corrosion resistance and enhanced compressive strength, anti-leakage and prolong life. Hand lay glass surface mat is mainly used for hand lay products with complex geometric curve, its volt mode is Datasheet--Glass fiber FRP surfacing mat Product name Alkaline or not gram weight (gm2) breadth（mm) BMZ020# Not Alkali 20 20-2000 Shelf life--Glass fiber FRP surfacing mat 12-24 months under the room temperature of 25C Packaging--Glass fiber FRP surfacing mat Selling Units: Single item Single package size: 1X1X1 cm Single gross weight: 1.2 KG
we are offering Glass fiber chopped strand mat. Description--Glass fiber chopped strand mat Fiber chopped strand mat is a kind of non-woven glass fiber reinforced material, which is made by chopping glass fiber first, then be settled down non-directional and uniform, adding some powder or emulsion binder. It is mainly used for hand laying up process and laminating process, easy to process, with excellent forming performance. Chopped strand mat can be saturated with resin fast, with high transparency, at the same time, uniform fiber makes the products smooth on surface during the lamination process, good performance on coating model. Characteristics--Glass fiber chopped strand mat Weight is evenly distributed per gram, can be saturated fast, bubbles easy to be eliminated, with high transparency for finished products, excellent coating model performance, less consumption of resin. Application--Glass fiber chopped strand mat Mainly used for tank, winding pipe products, the surface layer of the glass products. Can improve the surface corrosion resistance and enhance the compressive strength for finished fiber glass products, prevent leakage, prolong the service life. Hand laying up type glass fiber mat is mainly used for hand laying up product with complex geometric curve, it is with excellent coating model performance, rapid resin saturated speed, can improve the strength and corrosion resistance performance for finished glass fiber mat products. Parameters --Glass fiber chopped strand mat Technical Model Non-alkalialkaline Gravity(gm2) Width（mm) WDZ150# Non-alkali 150 900-3200
we are offering Polyurethane Casting Resin. Description--Polyurethane Resin polyurethane resin is a polymer material developed material room temperature curing two-component with low viscosity small odor soft transparent glue For it’s good advantages of Wear resistance yellowing resistance UV resistance and never hardensit is widely used for outdoor application Application--Polyurethane Resin 1)Used in aviation railways construction sports and other aspects; 2)Surface varnish for wooden and metal; 3)Insulation for storage tanks pipes cold storage fermentation tanks cold preservation barrels 4)Waterproof for building insulation 5)Used for prefabricated polyurethane sheet 6)For the products making of plastic products wear-resistant synthetic rubber synthetic fibers hard and soft foam products 7) For adhesives and coatings;such as for all types of wood chemical equipment telecommunications equipment and instrumentation and surface finishing of various means of transport toys handicrafts hand model gifts etc Characteristics --Polyurethane Resin Good radiation resistance yellow resistance and good hardness it is very suitable for outdoor products Good resistant of UV and aging Non change hardness not easy broken no shrinkage and non deformation and good adhensive and good sunshine resistance for the long time using Low viscosity and good leveling Instructions --Polyurethane Resin Operation 1 Operated under the conditions of ventilation environment 2 prepare the tools and make sure it is clean dry Un-oil and not contact with any chemical Solvent 3 Weigh part A and part B exactly ( multi-component part A will leads to the bottom of the bubble multi-component B may cause surface sticky)
We are offering fiberglass woven roving fabric glass fiber cloth. description glass fiber rove for winding is suitable for reinforcing unsaturated polyester resin, vinyl resin, epoxy resin, polyurethane resin etc. characteristics: uniform tension, speed and fully penetration, less hairiness, excellent mechanical properties. high hardness, low static, good dispersibility, good short cut ability. application aerospace, transportation, petroleum and natural gas pipeline, the roof of the vehicle, chemical equipment etc. Technical parameters model non-alkalialkaline filament diameter(μm) linear density(tex) wcs# non-alkali 11-24 300, 1200, 2400, 4800, 9600 zcs# medium-alkali 11-24 300、1200、2400、4800、9600 gcs# high-alkali 11-24 300、1200、2400、4800、9600 wdqcs# non-alkali 12-13 2400 package each yarn group can be packed with heat shrink film or stretch film, and then placed in trays or boxes, each tray 48 or 64 yarn group, each yarn 15-18kg. according to the requirements of users can increase the weight of yarn group, but no more than 24kg.it can also be the packed into cartons, one roll each box. container capacity: 1 x 20 foot container can hold 10 large and 10 small tray, net weight is about 20 tons
We are offering liquid platinum cure silicone rubber for is generally named two-components silicone rubber, part a and part b. It features an exceptional fluidity and good operability. The mixing ratio is 1:1 or 1:1, mainly be suitable for making molds it’s food grade silicone rubber.
We are offering unsaturated polyester resin. Unsaturated polyester resin description with high hardness, not easy to be broken, suitable for the production of many crystal crafts production application suitable for production of crystal lamp, candle holder, crystal crafts, crystal gifts, crystal trophy, crystal vase, crystal model building mode, crystal perfume bottles, crystal ashtray, crystal vase, hotel supplies, crystal stationery cards taiwan, crystal ball, crystal key button, crystal animal, flower and so on transparent products. operation ways 1, first, take a mount of resin, then add 0.5% - 1% cobalt ( thixtropic ) , and stirring evenly; 2, then add 0.8%-1.5% catalyst according to the amount of the resin and stirring evenly; 3, for the cure time is closely to the environmental temperature and humidity , so pls adjust the mix ratio of the catalyst and thixotropic 4the gel time of about 9-15 minutes at room temperature of 25c. warm tips : 1., it is belong to flammable items, pls avoid fire, and child contact, if contact with skin , pls wash by clean water and go to a doctor. 2, don’t add the thixotropic and cure agent at the same time , otherwise , it will be eexplosion and fired, 3. the catalyst and the thixotropic must be isolated storage package resin : 220kgiron drum package thixotropic : 25kgs per plastic drum cure agent : 25kgs per plastic drum shelf life under the temperature of 25℃ storage for a period of three to six months
Share your thoughts with other customers for Hongye Aerospace Company
Add Review
Amber Qu (Hongye Aerospace Company)No. 4163, Pingdi Liulian, Longgang Road, Pingdi Street, Longgang District, Shenzhen, China
Share us via
