Huapeng Group Co., Ltd

zhengjiang, China

Sivacon 8pv low voltage switchgear The SIVACON low voltage switchgear is an economical, practical and type-tested switchgear and controlgear assembly, used for example in: power plants, process industry, oil&gas, public&private building and so on. Huapeng Group is the technology partner of Siemens. It is the unique authorized manufacture of SIVACON 8PV in China. It is notable for its good availability and high degree of personnel and system safety. It can be used on all power levels up to 6300A: as main switchboard, as motor control centre, as subdistribution board. With the many combinations that the SIVACON modular design allows, optimized solutions can be offered for a wide range of demands in both fixed-mounted and withdrawable-unit design. Technical Data at a Glance: Standards and specifications: Type-tested low-voltage switchgear and controlgear assembly (TTA), Protection against electrical shock, testing of response to internal faults (arcing faults) Rated operational voltage: up to 690V, Rated insulation voltage: 1000V, Rated impulse with stand voltage: 8kV, Rated current: up to 6300A, Rated impulse withstand current: up to 200kA Rated short-time withstand current: up to 100kA Internal separation: forms 1 to 4, Surface treatment: frame parts- Sendzimir galvanized, enclosure-sendzimir galvanized/powder-coated, doors-powder-coated Degree of protection: IP20 to IP 54, Dimensions: height-2200mm, width-400, 500, 600, 800, 1000mm, depth-400, 600, 1000, 1200mm, SIVACON can accommodate up to 40 feeders per cubicle, that’s a world record. Even an initial base area of 400*400mm can be utilized. Standardized external dimensions simplify space requirement planning. SIVACON is completely communicative with the components DP/3WN1, DP/33WN6, SIMOCODE-DP as well as AS-I, via PROFIBUS-DP SIVACON executes all control commands reliably and supplies all required diagnostic and operating data to the process control level. TTA-tested standard modules: Verified safety for every specifically designed switchboard installation. Solid-wall design: Safe pressure equalization in the event of an arcing fault. Spring-loaded locks for front doors and top cover with pressure relief flaps: Personnel safety, safe pressure equalization in the event of an arcing fault. Circuit-breaker design, withdrawable-unit design, test and disconnected position with door closed: Ensure plant safety, personnel safety and improved availability. Degree of protection of switchboard unaffected, prevents dangerous deposits in the switchboard, reliable contacting of withdrawable units and protection for operating personnel in the event of internal faults. Withdrawable-unit design and visible isolating gaps: Visible isolating gaps on incoming/outgoing side, safe to work on withdrawable unit, on cable connection and on loads, and constant isolating gap condition. Withdrawable-unit design and standard operator interface with operating error protection for all withdrawable units: No maloperations and less time required for instruction. Withdrawable-unit design and isolating contact system located inside the contours of the withdrawable units: Protected against damage. Fixed-mounted design and lateral universal cubicle busbar: Visible and accessible connections. Siemens switching devices: No premature failures, minimized downtimes and shor delivery times.

Sivacon 8pt low voltage switchgear The SIVACON low-voltage switchboard is the standard solution for building and industrial technology. SIVACON is tailored to the needs of the world market, i.e. it takes into account the call for standard solutions from a single source on the one hand and on the other for local production and the resulting advantages in terms of financing and procurement close to the plant. As a power distribution board, SIVACON is available throughout the world and can be used at all power levels up to 7400 A, as withdrawable as well as plug-in and fixed-mounted units. SIVACON Features: • Type-tested standard modules (TTA) • Standardized busbar position at the top of the cubicle • 3- and 4-pole busbar system up to 7400 A • Rated peak withstand current Ipk up to 375 kA • Deep switchgear compartment for universal installation Modular structure of device compartments • Single-front and back-to-back installation • Cable lead-in from above or below • Cable connection from the front or rear Modular technology makes it possible to adapt SIVACON optimally to all requirements. • Standard horizontal busbar position at the top of the cubicle • Any components can be installed in the device compartments regardless of the busbar position and cubicle depth • Requirement-oriented compartmentalization of functional units (Form 1 to Form 4 according to IEC 60439-1) • Deep device compartments The frame consists of rigid sheet steel sections that are linked to one another: SIVACON’s dimensionally accurate and sturdy frame is available in bolted or welded versions. Surface Treatment: Optionally powder-coated, wetpainted or sendzimir-galvanized Frame and enclosure are manufactured from sheet steel in the following thicknesses: Frame: 2.5 mm Enclosure: 2.0 mm Degrees of Protection to IEC 60529 IP 30, IP 31, IP 40, IP41, IP 42 naturally ventilated IP 40, IP 54 unventilated Differing requirements for the busbar system call for individual options.

PZ2000 Lighting Distribution Box Configuration Description Main Components: enclosure, rail for components setting, wiring bar, insulator, components, wire and so on Operation: manual Wiring:conducting wire Frame:combined by modular parts, mechanical connection and enclosure. The box body is steel plate, the components are setted by rail. Corrosion-resistant:all the metal parts are processed by galvanizing or epoxy static powder painting

GKL Power Distribution Box Description and Features Main Components: Enclosure, components installation rail, wiring copper bar, insulator, components, wire and so on. Operation: Manual/ automatic Installation: Fixed installation or rail installation Wiring: Bolt wiring Feature of Frame Construction: There are frame type and box type and they are welding construction.