Jiangsu Liangyou Renewable Energy Mechanical Engineering Co.,Ltd.

Liyang, China

• MOQ 1 piece
• Oil sealGerman
• MotorSiemens

• MOQ 1 Set(s)
• BearingSKF or NSK
• Power(kw)90
• Oil sealGerman
• Capacity（T/H)0.8-1.2
• MotorSiemens

We are offering biomass pellet mill. Advantages of biomass pellet mill: 1.main driving adopt high precise of gear driving, rind die adopt quick dismantling clamp, the efficiency improve approximately 20% higher than belt driving. 2.the machine’s driving parts use high quality of imported bearing and oil seal to ensure high efficient driving , stable and low noise operation. 3.the advanced compensation type serpentine spring coupling is with novel, compact, safe structure and low faulty etc., 4.considering material and heat treatment, the running parts’ have been strengthened in order to meet the requirement of biomass pelleting. 5.patented ring die technology, mainly improve ring’s crack prevention and increased capacity per our and overall capacity. 6.additional oil adding system, additional air cooling system, with high efficiency, low energy consumption, stable operation, good quality pellets and reliable performance.

• MOQ 1 Set(s)
• Cooling volume(M3)1.5
• Airlock power(KW)0.55
• Output(T/H)3
• Main motor power(KW)0.75

We are offering mklb pendulum flow cooler. Features: 1.the counter flow cooling principle is adopted to cool the pellets with high temperature and moisture. Hot air touches hot pellets and cool air touches cool pellets so as to avoid the pellet surface crack caused by sudden cooling produced by direct touching between cool air and hot pellets. At the same time, the airlock is used for feeding and space of air inlet bigger, therefore it can get better cooling effects; 2.swing discharge has smooth and reliable discharging, low residue; 3.low power consumption, easily operation; 4.pellet temperature after cooling is less than  +3°c~5°c ambient temperature; 5. It is suitable for pellet cooling.  

• MOQ 1 Set(s)
• Main motor power(KW)0.75
• Output(T/H)3
• Cooling volume(M3)1.5
• Air-lock power(KW)0.55
• Total power(KW)5.5

We are offering high performance counter flow cooler. Features: 1. The unique rotating well-distributed institution makes the materials more even and the cooling effect more thorough. 2. The pendulum flap discharging institution is controlled by hydraulic systemï¼�pneumatic systemï¼�, even and smooth discharging. The discharge speed can be adjustable. 3.â it can cool kinds of materials like round, block, piece or pellet status. 4.â low energy consumption and easy to operate. 5. The temperature after cooling will not be over 3 or 5 â°c of the room temperature. 6. Automatically stop during discharging.

• MOQ 1 Set(s)
• Rotor Dia(mm)650
• Capacity(m³/h)10-18
• Number of flying knives(pcs)2
• Feed roller motor power(kw)2*3
• Feed speed(m/min)37.2

We are offering drum chipper: this series drum shipper with compact and reasonable structure, convenient operation and maintenance, large production capacity, high rate of qualified wood chips.low energy consumption, is the ideal equipment for product high-quality wood chips.in order to meet the different needs of users for the length of wood chips, chip length can be adjusted in a certain range.the feed has two forms which are horizontal and inclined, it has two discharging ways which is upper discharging and bottom discharging for the users to choose.cutter adopts wear-resisting chromium plate structure, greatly prolong the service life. Our company’s drum chipper is exclusive equipment for chipping the high quality wood chips.the raw material is logs, bamboos, branches, wood slabs, and other wood processing remains etc.the machine can be used in pulp paper, mdf, osb, particle board, fuel of burning boiler etc. These series of drum chipper is made up of seat, knife rotor, upper and bottom feeding roller, hydraulic system and electronic control system.the seat adopts high strength steel plate welding and overall stress elimination treatment which improve the strength and service life.the feeding rollers adopt separated structure for replacement purpose.

• Output(t/h)10-15

We are offering tgss series chain conveyor. features 1.it can be widely used for conveying raw materials, semi finished grains, feed etc for grain warehouse, port, wharf; 2.it is simple structure, small floor space, low power, good tightness, stable, low noise, long service life and easily installation, maintenance. The chain is high strength type. Blockage detector is optional.

• MOQ 1 Set(s)
• MotorSiemens
• BearingNSK or SKF

We are offering biomass pellet mill. Advantages of biomass pellet mill: 1.main driving adopt high precise of gear driving, rind die adopt quick dismantling clamp, the efficiency improve approximately 20% higher than belt driving. 2.the driving parts of machineuse high quality of imported bearing and oil seal to ensure high efficient driving , stable and low noise operation. 3.the advanced compensation type serpentine spring coupling is with novel, compact, safe structure and low faulty etc., 4.considering material and heat treatment, the running parts have been strengthened in order to meet the requirement of biomass pelleting. 5.patented ring die technology, mainly improve ring die crack prevention and increased capacity per our and overall capacity. 6.additional oil adding system, additional air cooling system, with high efficiency, low energy consumption, stable operation, good quality pellets and reliable performance. Our company has a ring die production workshop, our auto drilling is leading technology in china, self-manufactured ring dies are with distinct material, fine process and heat treatment, hole drilling technology can reach gun drilling effect, good production performance and high capacity.

• MOQ 1 Set(s)
• MotorSiemens
• BearingNSK or SKF

Remarkable feature of ring die wood pellet machine: 1. Main drive adopts high accurate gear drive,  with an output of about 20% higher than belt drive. 2. The drive part of the machine including motor optimize,  the high quality SKF bearings and NAK oil seals ensure high efficient and steady driving with low noise. 3. The imperative feeder device is adopted,  which making the machine operate smoothly as the material like wood sawdust,  corn,  wheat,  and rice straw is very light,  so they are needed to be pushed into pelleting chamber by force. 4. Special design of feed conditioner adopts the frequency-conversion speed regulating control to guarantee wood pellets quality. 5. The ring die is made by international advanced technology,  has long service life and ensure high quality of pellets. 6. The international advanced compensation type flexible coupling is of novel and compact structure,  make sure operation with safety,  low noise and less trouble. 7. Permanent magnet device can remove impurities in the pelleting process.

• MOQ 1 Set(s)
• MotorSiemens
• BearingNSK or SKF

 Features 1. It is widely used for pellet of light substance, such as wood chips, sawdust, straw, pasture, chrysanthemum, palm leaf and so on; 2. The feeder’s especial structure makes materials conveyed evenly, it is specially designed for pellet of light substance with the density of 0.3-0.6g cm3; 3. Feeder, conditioner and chute are made of stainless steel with long service life; 4. It is with magnet and over load protection system, which can protect machine well during production; 5. Feeder is with a variable speed controlled to meet different outputs requirements; 6. It makes gear directly-connecting as the driver, and is with quick-release die fixed by clamps, which can increase the output 15% more than the same type machine with belt-convey; 7. The bearing and oil seal in the main drive are imported from Japan to ensure highly-efficient, stability, credibility; 8. The alloy steel die is with international advanced equipment and technic, and has long service life, slippery pellet and high quality.

• MOQ 1 Set(s)
• MotorSiemens
• BearingNSK or SKF

Our advantages: 1.It is widely used for many raw material of farm waste and forestry waste, such as wood chips, wheat straw, sawdust, bamboo powder, peanut shell, rice rusk, palm leaf and so on. 2.The main driving adopt gear driving, ring die adopt quick dismantling clamp, with an output of 20% higher than belt driving. 3.The machine driving parts use international advanced bearing and oil seal ensure the efficient running and stable operation as well as low noise. 4.Considering the material and heat treatment of running parts which have been strengthened in order to meet the requirement of biomass pelleting. 5.Patented ring die technology, mainly improve ring�s crack prevention and increase the overall capacity. 6.Additional oil adding system, additional air cooling system, with high efficiency, low energy consumption, simple labor, stable operation and reliable performance. 7.The imperative feeding is adopted, which making the machine operate smoothly as the raw materials are very light, they are need to pushed into pelleting chamber with force. 8.The advanced S-shaped flexible coupling is of novel, compact, safe structure, ensure the long service life and low faulty.

• MOQ 1 Set(s)
• Capacity（T/H)5
• Main motor power(KW)1.1

We are offering pendulum flow cooler. features: 1.the counter flow cooling principle is adopted to cool the pellets with high temperature and moisture. Hot air touches hot pellets and cool air touches cool pellets so as to avoid the pellet surface crack caused by sudden cooling produced by direct touching between cool air and hot pellets. At the same time, the airlock is used for feeding and space of air inlet bigger, therefore it can get better cooling effects; 2.swing discharge has smooth and reliable discharging, low residue; 3.low power consumption, easily operation; 4.pellet temperature after cooling is less thanâ  +3â°c~5â°câ ambient temperature; 5. It is suitable for pellet cooling.â â 

• MOQ 1 Set(s)
• Output(T/H)10
• Main motor power(KW)1.5

We are offering china cheap swing cooler. features: 1. The unique rotating well-distributed institution makes the materials more even and the cooling effect more thorough. 2. The pendulum flap discharging institution is controlled by hydraulic system pneumatic system, even and smooth discharging. The discharge speed can be adjustable. 3. it can cool kinds of materials like round, block, piece or pellet status. 4. low energy consumption and easy to operate. 5. The temperature after cooling will not be over 3 or 5 °c of the room temperature. 6. Automatically stop during discharging.

• MOQ 1 Set(s)
• Main motor power(KW)1.5
• Output(T/H)15

We are offering counter flow cooler. uses adverse current cooling principle to cool the high temperature, high humidity pellet, avoid the hot material direct contacting the cold wind, prevents from the pellet surface split. Uses wind-shutting feeding, avoids feed port wind-leakage phenomenon; build-in adjustable taper dispersing material organization, the material distributes even; the new type eight-corner cooling warehouse cooling effect is great; shock type discharging effect is good; the speed is adjustable; no residual material; does not clean when change the material variety.

• MOQ 1 Set(s)
• Motive Power(kw)0.55
• Output(t/h)10-20

We are offering drum cleaner. features 1.it has good cleaning effect and high impurities removing efficiency. The efficiency of removing big impurities is higher than 99%. The big impurities do not contain complete granules or clean materials; 2.horizontal cantilever screen cylinder is adopted. Screen cylinder is divided into feeding section and discharging-sieving section. The use of different combination of screen holes can get ideal sieving efficiency; 3.adverse feeding type is adopted. The discharging section of screen cylinder is fitted with screw, which increases actual sieving length, reaches sufficient sieving effect and effectively prevents impurities from carrying clean materials; 4.the structure of inner sieving and outer brush cleaning is adopted. The fiber impurities and paddy straw are discharged in the shape of ball through guide screw and are cleaned automatically and reliably; 5.it has low power, high capacity, smooth and reliable running, convenient screen replacing and maintenance , compact structure and less floor space; 6.it is widely used for pre -cleaning of raw materials in the industries of feed, oil, flour, rice milling, grain warehouse, food, etc.

• MOQ 1 Set(s)
• Output(t/h)20-40
• Motive Power(kw)0.55

We are offering professional drum screener. Product description: 1 it is mainly used for the receiving, moving and cleaning of the grain as well as the precleaning of the raw materials in the feed, food processing , chemical industry , etc. 2 equipped with different sieve, this screener can dispose many materials like wheat, corn, rice, oil etc.

• MOQ 1 Set(s)
• Overall dimension(L*W*H)3681*870*900
• Capacity(m³/h)8-16
• Weight(kg)1200

We are offering china cheap drum chipper. Advantage of our drum chipper: this series drum shipper with compact and reasonable structure, convenient operation and maintenance, large production capacity, high rate of qualified wood chips.low energy consumption, is the ideal equipment for product high-quality wood chips.in order to meet the different needs of users for the length of wood chips, chip length can be adjusted in a certain range.the feed has two forms which are horizontal and inclined, it has two discharging ways which is upper discharging and bottom discharging for the users to choose.cutter adopts wear-resisting chromium plate structure, greatly prolong the service life. Our company’s drum chipper is exclusive equipment for chipping the high quality wood chips.the raw material is logs, bamboos, branches, wood slabs, and other wood processing remains etc.the machine can be used in pulp paper, mdf, osb, particle board, fuel of burning boiler etc. These series of drum chipper is made up of seat, knife rotor, upper and bottom feeding roller, hydraulic system and electronic control system.the seat adopts high strength steel plate welding and overall stress elimination treatment which improve the strength and service life.the feeding rollers adopt separated structure for replacement purpose.

• MOQ 1 Set(s)
• Wood chips length（mm）30
• Feed opening size(mm)225*680

We are offering best price wood drum chipper. 1.the wood chipper is a machine cutting the tree into chips,  which is widely used in the paper mill,  paper pulp mill or chipboard mill. the whole set of wood chipper equipment usually including 3 parts,  the log feeding structure,  the wood chipper( tree chipper) and the chips discharging structure. 2.the log feeding structure usually adopted two ways,  the conveyor or handwork. for the big log or high capacity model chipper,  it usually uses the conveyor feeding the logs into the chipper. for the small model chipper,  it usually feeding the logs into chipper by hand work,  which could reduce the cost of the conveyor. 3.for the chips discharging structure,  it usually adopted the two ways,  the chips discharging tube or the discharging conveyor. the discharging tube could blow the chips to about five meters high and spray into the truck directly or the designated place. the discharging conveyor could transport the chips for a longer way to the designated place,  such as warehouse.

• MOQ 1 Set(s)
• Overall dimension(L*W*H)2850*2790*1497
• Max dia of log190

We are offering superior quality wood chipper. Advantages of wood chipper: ♦ advanced structure,  high quality cutting chippers,  wide scope of application,  simple operation,  easy maintenance; ♦ wear-resistant sharp alloy tool,  reliable advanced and to enhance its service life; ♦ wearing parts low-consumption,  low running cost.

• MOQ 1 Set(s)
• Capacity （t/h）13-18
• Power （kw）90
• Grinding chamber width（mm）600
• Rotor diameter（mm）660

We are offering circle tear hammer mill grinder. Our advantages: 1.it is used in crushing small wood block, wood chips. 2.design of combined grinding chambers improve the crushing effect more than 15%. 3.design of combined grinding chambers prolong the service life of hammers and sieve plates. 4.advantage rotor bearings improve the rotor rotation stability and worn hammers’ stable operation, reduce the bearing heat. 5.improved structure of press sieve is convenient for dismantlement. 6.unique structure of door, reduce the vibration and lower the noise. 7.improved design of grinding chamber, decrease the air resistance and increase the the crush efficiency. 8.lowering the gravity of rotor make running more balanced, can easily realize the function of coarse grinding and fine grinding.

• MOQ 1 Set(s)
• Spindle diameter（r/min）2970
• Power （kw）90/110

We are offering hammer mill. The raw material for the hammer mill hammer mill can smash all kinds of raw materials of pellet feed,  such as corn,  sorghum,  grain,  legumes,  broken cake pellet and other materials.  the structure of the hammer mill this series hammer mill adopts steel plate jointing structure, motor and rotor are installed on the same base, adopts dowel pin coupling transmission, balance the rotor check, can work be positive and negative, operation door interlocked safety device to ensure that the operation door can not open. Features of the hammer mill: 1.it is simple structure, safe, dependable, easy to mount and easy to operate, high output; 2. It is widely used for grinding granular materials, such as corn, sorghum, wood chips, wheat, soybean, etc; 3. Steel plate welded structure; motor and rotor are mounted on same base plate; 4. Pin coupling direct connection driving;all rotors pass an accurate dynamic balancing test; 5. Ensure the safe operation door is locked when the machine is in operation; 6. The inlet is on top of machine  for ease of operation.

• MOQ 1 Set(s)
• Mash Output(t/h)18
• Granule Output(t/h)20

We are offering advance tdtg bucket . Features 1. It has compact structure and small overall dimensions of transect and floor space can be saved remarkably; 2. Head: rubber covering technology is adopted for head pulley to increase friction coefficient and improve the driving efficiency; height of discharging section of head is increased, thus extending the materials discharging time. And it is fitted with outlet adjusting plate and buffer chamber to effectively reducing the returning of materials; the housing is lined with replaceable uhmw wear proof materials; 3. Middle casing: the edge meshing technology is adopted, resulting in high strength and good tightness; the balancing pipe is added to balance the pressure between two housing of machine body; wide opening access door facilitates the repair and replacing of bucket; explosion- proof port is available and can effectively reduce pressure and release explosion; 4. Foot: new type shaft sealing structure prevents dust from leaking; split structure of bearing housing guarantees the reliability of use of machine; two sealing devices in the adjusting plate prevent the dust and materials from leaking out of the adjusting plate; 5. The machine is fitted with anti-reverse device so as to avoid the blockage caused by power failure; 6. Speed detector and off track alarm sensor are optional; 7. It can be used for granular, powder and block materials vertical conveying and widely for feed mill, oil plant, food, chemicals, construction materials, grain warehouse and port.

• MOQ 1 Set(s)
• Pellet Output(t/h)35
• Mash Output(t/h)25

We are offering high capacity hook elevator. introduction tdtg series bucket elevator is applicable for continuous and vertical elevating of materials in shape of powder, granule and small piece. It can be widely used in the industries of feed, cereal, oil, food, chemicals, building materials, grain depot, port and pier. Features of  pellet bucket elevator 1. Bucket elevator has characteristics of large transport capacity, high elevation, stable operation and long working life. 2. The machine is applicable for conveying the powder, grain and small block materials, such as coal, cement, block, sand, clay and ore. 3. Bucket elevator is allowed to convey materials with high temperature(250°c) when armed with special chain structure, and the elevating height can reach 40m. 4. It has vast range of application with almost no limitation for lifting material forms and properties. Materials like power, grain or big lump could be all applicable .also its good sealing condition could effectively reduces the environmental pollution. 5. excellent running reliability. Advanced design and processing method ensure the running reliability of the complete machine. 6. long service life. The design of this machine ensures that the materials is seldom scattered while feeding and discharging, which reduces the mechanical wearing.

• MOQ 1 Set(s)

We are offering high performance disk granulator.  features 1、it can be used for not only production of common compound fertilizer but also high concentration fertilizer； 2、it is with advantages of high output, high intensity of granular, low investment and easily operation and widely used by most of producer； 3、it can control uniformity and intensity of granular effectively; less moisture content and easily for drying

• MOQ 1 Set(s)
• Capacity(t/h)5
• Volume(m³)2.5

We are offering high quality fkln series counter flow cooler.  features 1. The counter flow cooling principle is adopted to cool the pellets with high temperature and moisture. Hot air touches hot pellets and cool air touches cool pellets so as to avoid the pellet surface crack caused by sudden cooling produced by direct touching between cool air and hot pellets. At the same time, the airlock is used for feeding and space of air inlet bigger, therefore it can get better cooling effects; 2.slide reciprocating discharger has smooth and reliable discharging, low residue; 3.low power consumption, easily operation; 4.pellet temperature after cooling is less than  +3℃～5℃ ambient temperature; 5. It is suitable for fertilizer pellet cooling.

• MOQ 1 Set(s)
• Mash output(t/h)6-8
• Power(kw)2.2

We are offering advance chinese rotary screener. Features 1. Three moving modes i.e. Circumferential, elliptical and rectilinear are combined, resulting in good screening effect; 2. Belt is adopted for driving the screener hull. The bias weights are balanced and low noise. The support at the tail of screener hull is an improved elastic support with less vibration; 3. The strengthened base ensures that equipment will run more smoothly. And the hanging structure can be used according to the actual site conditions so as to meet customer’s requirements of retrofit; 4. The improved steel cable structure avoids the wearing of steel cable; 5. The adoption of one body or combined screener cover structure guarantees lower screener covers weight, stronger rigidity and better sealing; 6. It is applicable for screening and classifying of fertilizer granule. It is also can be used for cleaning of fertilizer and classifying of semi finished products after second grinding by large and medium fertilizer factories.

• MOQ 1 Set(s)
• Power(kw)0.2*2
• Capacity(t/h)3-5

We are offering high capacity ffjz series vibrating screener. Features 1. It is equipment which classifies mixtures with various particle sizes through vibrating screen; 2. Self balancing is adopted for driving. There are two vibrating motors mounted on screener hull symmetrically, which rotation direction is contrary to ensure screening effect; 3. It is small space occupying, stable and widely used. 

• MOQ 1 Set(s)
• Speed (r/min)7.2
• Length Of Barrel (m)10

We are offering superior service ytgz series drum dryer. Features 1、in order to control temperature of dryer, there are thermal element for inlet and outlet of dryer; change of temperatures can be indicated by thermometer to make it easy for controlling of working temperature inside of dryer (usually 350-380 celsius degree); 2、it is widely used for cement, mine, construction, chemicals, grain, compound fertilizer industries.

• MOQ 1 Set(s)
• Dia Of Barrel (mm)￠1200
• Degree Of Inclination (°)3-5

We are offering drum dryer. 1.features of drum drier:   the drum dryer is mainly composed by the revolving body, lifting plate, driving device, supporting device, sealing ring and other components. So it has the advantages of reasonable structure, perfect in workmanship, high yield, low energy consumption, convenient to operate.   2.drum dryer main features: 1). drum dryer has strong anti overload ability, large handling capacity, less fuel consumption, low dry cost. 2). The drum dryer adopt downstream drying method, the hot air with wet materials enter into the dryer by the same side, can use the high temperature air to achieve very high evaporation strength, the exist temperature of dryer is low, the thermal efficiency is high. 3). The drum dryer according to different materials' properties change operation parameters, make the material in the dryer cylinder body can form a stable all broken fabric curtain, qualitative heat is more fully. 4).the drum dryer have new feeding and discharging device eliminate the feeding jams, discontinuous, uneven and returning charge etc. Phenomenon, reduce the load of dust removal system.  

• MOQ 1 Set(s)
• Mixing Time (min)13
• Volume ( m³)1
• Homogeneity (CV≤%)10

Features 1. It is suitable for processing biological fertilizer, organic fertilizer and compound fertilizer, etc; 2. The mixing time is 1-3 minutes, and the homogeneity can reach 10%. It can add water, oil and other liquids; 3. The discharge door is adopted to slide gate; 4. Many forms of opening door at the bottom, such as pneumatic, electric and strobe forms, collocate gas seal, avoid leakage of fine materials.

• MOQ 1 Set(s)
• Oil sealGerman
• MotorSiemens

We are offering high perfermance horizontal ring die pellet mill. Remarkable feature of ring die wood pellet machine: 1.â mainâ driveâ adoptsâ highâ accurateâ gearâ drive, â withâ anâ outputâ ofâ aboutâ 20%â higherâ thanâ beltâ drive. 2.â theâ driveâ partâ ofâ theâ machineâ includingâ motorâ optimize, â theâ highâ qualityâ skfâ bearingsâ andâ nakâ oilâ sealsâ ensureâ highâ efficientâ andâ steadyâ drivingâ withâ lowâ noise. 3.â theâ imperativeâ feederâ deviceâ isâ adopted, â whichâ makingâ theâ machineâ operateâ smoothlyâ asâ theâ materialâ likeâ woodâ sawdust, â corn, â wheat, â andâ riceâ strawâ isâ veryâ light, â soâ theyâ areâ neededâ toâ beâ pushedâ intoâ pelletingâ chamberâ byâ force. 4.â specialâ designâ ofâ feedâ conditionerâ adoptsâ theâ frequency-conversionâ speedâ regulatingâ controlâ toâ guaranteeâ woodâ pelletsâ quality. 5.â theâ ringâ dieâ isâ madeâ byâ internationalâ advancedâ technology, â hasâ longâ serviceâ lifeâ andâ ensureâ high quality of pellets. 6.â theâ internationalâ advancedâ compensationâ typeâ flexibleâ couplingâ isâ ofâ novelâ andâ compactâ structure, â make sure operation with safety, â lowâ noiseâ andâ lessâ trouble. 7.â permanentâ magnetâ deviceâ canâ removeâ impuritiesâ inâ theâ pelletingâ process.

• MOQ 1 Set(s)
• Output(t/h)10-20
• Motive Power(kw)0.55

We are offering Wood Pre Screener. Product Description: It is mainly used for the receiving, moving and cleaning of the grain as well as the precleaning of the raw materials in the feed, food processing , chemical industry , etc. Equipped with different sieve, this screener can dispose many materials like wheat, corn, rice, oil, etc.

• MOQ 1 Set(s)
• Feed speed(m/min)37
• Feed roller motor power(kw)2*4
• Main motor power(kw)110

We are offering good function wood slicer. Products introduction of wood chipper: 1.the wood chipper is a machine cutting the tree into chips,  which is widely used in the paper mill,  paper pulp mill or chipboard mill. the whole set of wood chipper equipment usually including 3 parts,  the log feeding structure,  the wood chipper( tree chipper) and the chips discharging structure. 2.the log feeding structure usually adopted two ways,  the conveyor or handwork. for the big log or high capacity model chipper,  it usually uses the conveyor feeding the logs into the chipper. for the small model chipper,  it usually feeding the logs into chipper by hand work,  which could reduce the cost of the conveyor. 3.for the chips discharging structure,  it usually adopted the two ways,  the chips discharging tube or the discharging conveyor. the discharging tube could blow the chips to about five meters high and spray into the truck directly or the designated place. the discharging conveyor could transport the chips for a longer way to the designated place,  such as warehouse.

• MOQ 1 Set(s)
• Overall dimension(L*W*H)4670*2250*1515
• Rotor Dia(mm)800
• Capacity(m³/h)38
• Main motor power(kw)132

We are offering superior service log chipper. Advantages of wood chipper: ♦ advanced structure,  high quality cutting chippers,  wide scope of application,  simple operation,  easy maintenance; ♦ wear-resistant sharp alloy tool,  reliable advanced and to enhance its service life; ♦ wearing parts low-consumption,  low running cost.

• MOQ 1 Set(s)
• Grinding chamber width（mm）500
• Capacity （t/h）10-15
• Rotor diameter（mm）660
• Power （kw）55/75

We are offering hammer mill.  our advantages: 1.it is used in crushing small wood block, wood chips. 2.design of combined grinding chambers improve the crushing effect more than 15%. 3.design of combined grinding chambers prolong the service life of hammers and sieve plates. 4.advantage rotor bearings improve the rotor rotation stability and worn hammers’ stable operation, reduce the bearing heat. 5.improved structure of press sieve is convenient for dismantlement. 6.unique structure of door, reduce the vibration and lower the noise. 7.improved design of grinding chamber, decrease the air resistance and increase the the crush efficiency. 8.lowering the gravity of rotor make running more balanced, can easily realize the function of coarse grinding and fine grinding.

• MOQ 1 Set(s)
• Capacity （t/h）13-18
• Power （kw）75/90
• Rotor diameter（mm）600
• Spindle diameter（r/min）2970

We are offering hammer grinder. The raw material for the hammer mill hammer mill can smash all kinds of raw materials of pellet feed,  such as corn,  sorghum,  grain,  legumes,  broken cake pellet and other materials.  the structure of the hammer mill this series hammer mill adopts steel plate jointing structure, motor and rotor are installed on the same base, adopts dowel pin coupling transmission, balance the rotor check, can work be positive and negative, operation door interlocked safety device to ensure that the operation door can not open. Features of the hammer mill: 1.it is simple structure, safe, dependable, easy to mount and easy to operate, high output; 2. It is widely used for grinding granular materials, such as corn, sorghum, wood chips, wheat, soybean, etc; 3. Steel plate welded structure; motor and rotor are mounted on same base plate; 4. Pin coupling direct connection driving;all rotors pass an accurate dynamic balancing test; 5. Ensure the safe operation door is locked when the machine is in operation; 6. The inlet is on top of machine  for ease of operation.

• MOQ 1 Set(s)
• Rotor diameter（mm）660
• Power （kw）90/110
• Output(t/h)16-22

We are offering high efficiency hammer grinder. Features of  mfsp series hammer mill   reasonable design of grinding chamber, increasing pass ratio of material reasonable and safe sieve pressing mechanism, convenient, quick and safe replacing of sieve. Special design and machined rotor assembly, ensure more smoothly, reliable and safe running. Main motor and filter system are interlock controlled, ensuring filter bag have good ventilating ability and increase capacity. Key part adopts imported product, increasing service life, reducing the cost of operation and maintenance.

• MOQ 1 Set(s)
• Grinding chamber width(mm)250
• Capacity（kg/h）600-800
• Rotor diameter（mm）500
• Rotor speed（rpm）2800-3000

we are offering Straw Crush Mill.LYXF series of chipper & hammer mill made by our company combines functions of a disc chipper and beater hammer mill.It is widely used for its more functions.

• MOQ 1 Set(s)
• Weight（kg）700
• Capacity（kg/h）800-1200
• Rotor speed（rpm）1800-3000
• Power （kw）22+7.5
• Rotor diameter（mm）500

We are offering superior quality chipper&hammer mill. Lyxf series of chipper & hammer mill made by our company combines functions of a disc chipper and beater hammer mill.it is widely used for its more functions.

• MOQ 1 Set(s)
• Capacity50m³/h(barking)
• Rotor speed（rpm）850

We are offering hammer re-grinder. Hammer re-grinder is hammer beater type.it can crush barks, wood veneer and oversize shavings moreover, it can crush raw material which are used for particle board or fuel boiler.

• MOQ 1 Set(s)
• Max dia of logs（mm）100
• Rotor speed（rpm）950
• Capacity（m3/h）8-12
• Length of wood chips（mm）12-35

We are offering wood manule slicer. The serial disc chippers is special equipment for producing high-quality wood chip, extensively used in the material-preparing process of industries a

• MOQ 1 Set(s)
• Capacity（m3/h）15-20
• Rotor speed（rpm）740

We are offering manual operation log slicer. The serial disc chippers is special equipment for producing high-quality wood chip, extensively used in the material-preparing process of industries as pulp paper making, shaving board, mdf and in independent wood chip production base, log is the main raw material for cutting.

• MOQ 1 Set(s)
• Power(kw)0.2*2
• Capacity(t/h)3-5

We are offering vibrating screener . Features 1. It is equipment which classifies mixtures with various particle sizes through vibrating screen; 2. Self balancing is adopted for driving. There are two vibrating motors mounted on screener hull symmetrically, which rotation direction is contrary to ensure screening effect; 3. It is small space occupying, stable and widely used. 

• MOQ 1 Set(s)
• Head Pulley Dia.(mm)Φ360
• Output Granular Materials(t/h)10

We are offering hook elevator. tdtg series bucket elevator is applicable for continuous and vertical elevating of materials in shape of powder, granule and small piece. It can be widely used in the industries of feed, cereal, oil, food, chemicals, building materials, grain depot, port and pier. Features of  pellet bucket elevator 1. Bucket elevator has characteristics of large transport capacity, high elevation, stable operation and long working life. 2. The machine is applicable for conveying the powder, grain and small block materials, such as coal, cement, block, sand, clay and ore. 3. Bucket elevator is allowed to convey materials with high temperature(250°c) when armed with special chain structure, and the elevating height can reach 40m. 4. It has vast range of application with almost no limitation for lifting material forms and properties. Materials like power, grain or big lump could be all applicable .also its good sealing condition could effectively reduces the environmental pollution. 5. excellent running reliability. Advanced design and processing method ensure the running reliability of the complete machine. 6. long service life. The design of this machine ensures that the materials is seldom scattered while feeding and discharging, which reduces the mechanical wearing.

• MOQ 1 Set(s)
• Power (kw)55/75
• Speed Of Rotor (rpm)1480
• Output (t/h)10-15

We are offering advance ffsp series organic fertilizer hammer mill. Features： 1. The grinding chamber is of tear circle shape, effectively eliminating the circular flow in the grinding process and getting higher capacity; 2. The bottom of grinding chamber is fitted with u-shape double grinding structure, further improving the capacity with evener particle size; 3. Rotor passes accurate dynamic balancing test, resulting in low equipment noise and smooth running. 4. Both coarse and fine grinding is realized through adjusting the gap between beater and screen; 5. New type s shape coupling directly connecting driving results in big offset travel and effectively avoid the heating of bearing; 6. Beater blade edge is vacuum-welded by special alloy steel, resulting in long service life; 7. The imported products are used for key parts, resulting in long service life and low maintenance cost; 8. The moving full-wide operation door facilitates maintenance and replacing of beater; 9. It is widely used in fertilizer factory.

• MOQ 1 Set(s)
• Power(kw)75/90
• Output(t/h)1.5-3.5

We are offering fertilizer pellet mill .  features 1. The feeder is advanced to meet viscosity of fertilizer and ensure materials can enter pressing chamber evenly; 2.the compression ratio is advanced to increase output and pdi; 3.one distributing plate on top of main shaft is adopted to make discharging more evenly; 4.feeder, conditioner and chute are made of stainless steel with long service life; 5.the bearing and oil seal in the main drive are imported and operation more stable.

• MOQ 1 Set(s)

We are offering china fpzl series disk granulator. features 1、it can be used for not only production of common compound fertilizer but also high concentration fertilizer； 2、it is with advantages of high output, high intensity of granular, low investment and easily operation and widely used by most of producer； 3、it can control uniformity and intensity of granular effectively; less moisture content and easily for drying

• MOQ 1 Set(s)
• Capacity(t/h)10
• Power(kw)1.5
• Volume(m³)4

We are offering counterflow cooler. 1. The counter flow cooling principle is adopted to cool the pellets with high temperature and moisture. Hot air touches hot pellets and cool air touches cool pellets so as to avoid the pellet surface crack caused by sudden cooling produced by direct touching between cool air and hot pellets. At the same time, the airlock is used for feeding and space of air inlet bigger, therefore it can get better cooling effects; 2.slide reciprocating discharger has smooth and reliable discharging, low residue; 3.low power consumption, easily operation; 4.pellet temperature after cooling is less than  +3℃～5℃ ambient temperature; 5. It is suitable for fertilizer pellet cooling.

• MOQ 1 Set(s)
• Pellet Output(t/h)16-22
• Mash Output(t/h)14-18
• Power(kw)5.5

We are offering rotary screener. Features 1. Three moving modes i.e. Circumferential, elliptical and rectilinear are combined, resulting in good screening effect; 2. Belt is adopted for driving the screener hull. The bias weights are balanced and low noise. The support at the tail of screener hull is an improved elastic support with less vibration; 3. The strengthened base ensures that equipment will run more smoothly. And the hanging structure can be used according to the actual site conditions so as to meet customer’s requirements of retrofit; 4. The improved steel cable structure avoids the wearing of steel cable; 5. The adoption of one body or combined screener cover structure guarantees lower screener covers weight, stronger rigidity and better sealing; 6. It is applicable for screening and classifying of fertilizer granule. It is also can be used for cleaning of fertilizer and classifying of semi finished products after second grinding by large and medium fertilizer factories.

• MOQ 1 Set(s)
• Power(kw)0.2*2
• Capacity(t/h)6-10

We are offering ffjz series vibrating screener   features 1. It is equipment which classifies mixtures with various particle sizes through vibrating screen; 2. Self balancing is adopted for driving. There are two vibrating motors mounted on screener hull symmetrically, which rotation direction is contrary to ensure screening effect; 3. It is small space occupying, stable and widely used. 

• MOQ 1 Set(s)
• Length Of Barrel (m)1200
• Power (kw)15
• Speed (r/min)4.8
• Volume (m3)21.2
• Dia Of Barrel (mm)￠1500

We are offering ce approved drum dryer. Features 1、in order to control temperature of dryer, there are thermal element for inlet and outlet of dryer; change of temperatures can be indicated by thermometer to make it easy for controlling of working temperature inside of dryer (usually 350-380 celsius degree); 2、it is widely used for cement, mine, construction, chemicals, grain, compound fertilizer industries.