Jiangxi Ptfe,Pom,Polyethylene Co. Ltd

Jiangxi, JiuJiang, China

• MOQ 200 Kilogram
• Density2.18~2.3g/cm3

We are offering Molded Ptfe Sheet. ptfe had special performance compared with other plastic. Such as never aging, colleagues of high and low temperature resistance, and etc. So ptfe was widely used as a resistant high&low temperature material, corrosion-resistant materials, insulation materials in the atomic energy, defense, aerospace, electronics, electrical, chemical industry, machinery, instruments, meters, construction, textile, metal surface treatment, pharmaceutical, medical, food, and metallurgical smelting industry, and become irreplaceable products.

• MOQ 200 Kilogram
• ColorWhite
• Dielectric Strength19.7KV/mm

We are offering pom rod. Features : ■ no centerline porosity ■ good dimensional stability ■ low moisture absorption ■ good wear and abrasion resistance properties ■ excellent machinability ■ good combination of mechanical properties ■ chemical resistance to fuels and solvents

• MOQ 100 Kilogram
• Water Absorption< 0.01%
• ColorWhite

• MOQ 200 Kilogram
• Stylemolded polytetrafluoroethylene pipe

We are offering Extruded Ptfe Tubing. In the fluorocarbon & plastic, ptfe Won the reputation of plastic king. The most well known brand name of PTFE is Teflon by DuPont company. PTFE had Special performance Compared with other plastic. such as Never aging, Colleagues of high and low temperature resistance, and etc. so PTFE was widely used as a resistant high&low temperature material, corrosion-resistant materials, insulation materials in the atomic energy, defense, aerospace, electronics, electrical, chemical industry, machinery, instruments, meters, construction, textile, metal surface treatment, pharmaceutical, medical, food, and metallurgical smelting industry, and become irreplaceable products.

• MOQ 200 Kilogram
• Elongation at Break140%

We are offering molded ptfe rod. ptfe rod - grades our company, in the molded ptfe rod, can be divided into four grades. 100% new material grade. 80% new material grade, and 20% recycled. 50% new material grade, and 50% recycled. 100% recycled material grade. regarding the 100% recycled material grade, ptfe recycled material technology as following: 1: mandatory retention raw materials again cleanliness, not allow to include other substances and dust. Must be one hundred percent. 2: then , through the mill again ground into the raw powder . 3: regeneration powder thought high-temperature sintering, choose a good ptfe powder. 4: production is the same to the virgin technology material.

• MOQ 200 Kilogram
• Vicat Softening Point (°C) 150

We are offering pp rod, polypropylene rod. properties ■ higher temperature resistance ■ light weight ■ good dielectric & insulating properties ■ essentially inert to most chemicals ■ unique cracking resistance ■ economically in compare with physical properties and price ■ harder with higher strength application ■ gears in chemical industry ■ tank, exhaust system in chemical industry ■ etching & electro-plating equipment ■ container, pipes, galvanizing, laboratory equipment.

• MOQ 200 Kilogram
• Higher temperature resistanceEtching & electro-plating equipment
• Vicat Softening Point (°C) 150

We are offering pp sheet, polypropylene sheet. Properties ■ higher temperature resistance ■ light weight ■ good dielectric & insulating properties ■ essentially inert to most chemicals ■ unique cracking resistance ■ economically in compare with physical properties and price ■ harder with higher strength application ■ gears in chemical industry ■ tank, exhaust system in chemical industry ■ etching & electro-plating equipment ■ container, pipes, galvanizing, laboratory equipment.

• MOQ 200 Kilogram
• Elongation350-700%

We are offering pu rod. polyurethane rod with very good chemic erode resistant, impregnant resistant, ozone resistant, radiation resistant, aging resistant, hydrolyze resistant. And high tear resistant, high impact resistant, high bend strength and low compression set etc.

• MOQ 200 Kilogram
• Density (g/cm3)1.3
• Coloryellow

We are offering Pu Sheet, Polyurethane Sheet. Polyurethane short name is PU, and this material can made PU Sheet and PU Rod, this products most importantly is elastomer, due to Pu production had the importantly properties, so PU production widely used as with very good chemic erode resistant, impregnant resistant, ozone resistant, radiation resistant, aging resistant, hydrolyze resistant. And high tear resistant, high impact resistant, high bend strength and low compression set etc. The abrasion resistant is 5 multiple more than pure natural rubber, and the oil resistant is 3-5 multiple more than NBR rubber, and have high elasticity 65% with prominent compression resistant at high temperature. With broad hardness range on 15-98 Shore A, very good viscidity with metal material, Polyurethane Rod & PU Sheet is a new macromolecule material with fast evolutive now. Apply to Food Industry, Water Industry, Safety Industry, military, mine, oil field, chemical, printing, punch, paper making, spin, auto and etc seal industrial.

• MOQ 200 Kilogram
• Working Temperature -48 ~ 82 °C

We are offering hdpe sheet. High density polyethylene short name is hdpe, and the grade had pg100, pg300, etc. And family is polyethylene, and this material can be made hdpe sheet & hdpe rod, hdpe sheet material also is the importantly thermosetting plasitc, high density polyethylene & hdpe sheet features: very light and extremely tough, chemically resistant plastic. It does not absorb water, it has good sliding abrasion resistance and is self lubricating: 1. Very low co-efficient of friction, 2. Very high surface release properties, 3. High chemical resistance, 4. Excellent impact resistance, 5. Very good damping properties, 6. Weldable plastic, 7. Excellent abrasion resistance. Due to hdpe production had the best properties, so hdpe production widely used as ideal for making insulated and corrosion resistant liners in chemical, electromechanical, food and pharmaceutical industry or can be used to be machined into mechanical parts like gear, bearing, etc.

• MOQ 200 Kilogram
• Tensile Strength14Mpa

We are offering skived ptfe sheet. ptfe sheet - grades our company, in the extruded ptfe rod, can be divided into four grades. 100% new material grade. 80% new material grade, and 20% recycled. 50% new material grade, and 50% recycled. 100% recycled material grade. regarding the 100% recycled material grade, ptfe recycled material technology as following: 1: mandatory retention raw materials again cleanliness, not allow to include other substances and dust. Must be one hundred percent. 2: then , through the mill again ground into the raw powder . 3: regeneration powder thought high-temperature sintering, choose a good ptfe powder. 4: production is the same to the virgin technology material.

• MOQ 200 Kilogram
• Impact Strength of Izod13KJ/㎡

We are offering molded ptfe tubes. the most well known brand name of ptfe is teflon by dupont company. Ptfe had special performance compared with other plastic. Such as never aging, colleagues of high and low temperature resistance, and etc. So ptfe was widely used as a resistant high&low temperature material, corrosion-resistant materials, insulation materials in the atomic energy, defense, aerospace, electronics, electrical, chemical industry, machinery, instruments, meters, construction, textile, metal surface treatment, pharmaceutical, medical, food, and metallurgical smelting industry, and become irreplaceable products.

• MOQ 200 Kilogram
• Tensile Strength60Mpa
• ColorWhite
• Good dimensional stabilityLow moisture absorption

We are offering pom sheet & delrin sheet & acetal sheet : is also one of the engineering plastics chosen within the automotive industry because of its long term dimensional stability and toughness it provides solutions for designers to help them produce long lasting and very durable components. Another area that has proved popular for pom sheet is marine applications, this environment suits pom because the low moisture absorption results in components that will not expand or change dimension due to any contact with water.

• MOQ 200 Kilogram
• Hardness60~80Shore A

We offer extruded ptfe rod. ptfe had special performance compared with other plastic. Such as never aging, colleagues of high and low temperature resistance, and etc. So ptfe was widely used as a resistant high & low temperature material, corrosion-resistant materials, insulation materials in the atomic energy, defense, aerospace, electronics, electrical, chemical industry, machinery, instruments, meters, construction, textile, metal surface treatment, pharmaceutical, medical, food, and metallurgical smelting industry, and become irreplaceable products.

• MOQ 200 Kilogram
• Melting Point136°C

We are offering uhmwpe rod. features: 1, low friction coefficient, high wear resistance. 2, excellent chemical stability, corrosion resistance. 3, non-toxic, in accordance with fda and usda standards. 4, high impact resistant. 5, good self-cleaning properties. 6, low water absorption. Due to uhmwpe production had the best properties, so uhmwpe production widely used as flow promotion liners, wear strips, vent and filter plates, trough liners, guide rails and rollers hopper liners, conveyor components subject to high wear and requiring low friction, componentry in direct contact with food stuffs.

• MOQ 200 Kilogram
• ColorBlack
• Hardness68Shore B

we are offering uhmwpe sheet. ultra-high molecular weight polyethylene short name is uhmwpe, and the grade had uhmwpe 500, uhmwpe 800, uhmwpe 1000, etc. and family is polyethylene, but the characteristics is better hdpe, and this material can be made uhmwpe sheet & uhmwpe rod, uhmwpe sheet material also is the importantly thermosetting plasitc, ultra-high molecular weight polyethylene & uhmwpe sheet features: 1, low friction coefficient, high wear resistance.2, excellent chemical stability, corrosion resistance. 3, non-toxic, in accordance with fda and usda standards. 4, high impact resistant. 5, good self-cleaning properties. 6, low water absorption.

• MOQ 200 Kilogram
• Density (g/cm3)0.91

We are offering pp tubes, polypropylene tube. pp tubing - polypropylene tubes :polypropylene tubing can be used as a low cost solution in many fluid transfer applications. It offers good mechanical strength and can be used in structural systems. features: light weight . excellent electrical properties. good chemical resistance. applications: compressed air lines - food & beverage - potable water systems - wire jacketing - pneumatics, & many more.