Junty Industries,Ltd.

• MOQ 1 Piece

We are offering Rotary Unions Yht. conditions of use： suitable fluids：water、air、conduction oil max pressure：60bar max speed：4000r/min structural features: aerospace is listed in the performance of the highest velocity, pressure, maximum operating temperature of each type of rotary joint in the actual use of the maximum temperature, pressure, speed and assembly of its structure varies in different thread and connection forms will affect the margin of safety. when the yht-joint use of heat-conducting oil medium, must htf in metal or non-metallic material in the flow of the circulatory system, of course, including the current system we're using. if the heat transfer oil is not completely transition, joint sealing surface may be a problem. we recommend a minimum 230 mesh per inch or 62-micron filter particles. innovative design, versatility. corrosion-resistant materials. can and other h-type rotary joint completely mutual substitution. special design under conditions of limited space in the operation not damage the connector. no lubrication of rolling bearings sealed for life. balanced load and seal wear to a minimum, reduce the torque. corrosion-resistant seals extended wear, very resistant to low-quality water. sealing material has self-lubricating. provides bspt, bsp, unf-npt threaded connections and flanges. unique (coaxial connection) header and ways to enhance the operational stability, reducing the need for hoses and connections operating stress, improve joint durability. connector assembly and disassembly is very simple. the bearing outer ring with o-ring, to avoid sediment accumulation in the bearing gap, resulting in premature bearing damage. spring assembly is located outside the main flow channel sorrowful, resulting in lower pressure loss, to avoid the retention of particles in the media, in general, improve the quality of the fluid. grain borer connected sets of joints are easy to use wrench axis plane.

• MOQ 1 Piece

We offer many type of Rotary Unions used in the media water, steam, air and oil. this type is used in textile machinery，rubber machinery，etc.

• MOQ 1 Piece

Tungsten Carbide (TC) is one of the most versatile materials available for wear parts. It gives the following benefits: · High hardness and mechanical strength · Superior wear resistance · Good corrosion resistance · Easily withstands abrasive services · (Good fracture toughness) Two primary grades of tungsten carbide are available - Nickel bonded TC and Cobalt bonded TC: · 6% Nickel bonded TC, gives enhanced corrosion resistance · 6% Cobalt bonded TC, provides higher hardness and better abrasion resistance

• MOQ 1 Kilogram

Silicon carbide (sic) is one of the most popular high performance tribo-materials, which has been commercially available for more than twenty-five years. Its features include: · excellent abrasion and wear resistance · excellent corrosion resistance · low coefficient of friction · low coefficient of thermal expansion · high thermal conductivity · hardness greater than tungsten carbide different grades of silicon carbide are available as following: · reaction bonded silicon carbide (rb sic) – a very economical material which gives excellent wear characteristics, as well as good chemical resistance. · sintered silicon carbide (ssic) – the absence of free silicon makes it most resistant to chemically-aggressive fluids, and ideal for high temperature applications. · graphite-loaded silicon carbide – this is a composite of silicon carbide and free graphite. Graphite is added to rb sic (rb sic + c) or ssic (ssic + c), to improve tribological behavior by enhanced lubricity.

We are offering rotary unions h type. Usable range： speed：1000rpm temperature：100°c pressure：1mpa medium：water，air and oil. This type one-way or two-way rotary unions , and with two type thread connection and flange connection.

• MOQ 1 Piece

We are offering Rotary Unions Qd Type or rotary joint.

• MOQ 1 Piece

We are offering Rotary Unions Yhp Type or Rotary Joint.

• MOQ 1 Piece

We are offering Rotary Unions. the rotary joint is installed on the trunnion of the converter for steel producers to connect the converter and pipe passages, and transmit cooling, bottom blowing and top blowing mediums required for the converter. it can guarantee the continuous water diversion and air ventilation of the converter in the production process, realize the cooling of trunnions, backing rings and furnace crowns, and conduct argon (nitrogen) bottom blowing and bosh air cooling of the converter. it is an important component to ensure the continuous and safe production of the converter.

• MOQ 1 Piece

We are offering Rotary Unions. structural features:the yhf rotary joint is designed according to the characteristics of rollers of the continuous casting machine. most of its joint body is embedded into the roller, and the only exposed pipeline is connected to the flange plate. the joint features balanced mechanical seal structural design. with thermostable seal components and anti-abrasive materials, the product changes from the original axial serial structure to the unique inverted embedding seal structure, thus not only reducing axial length, but also integrating the shell structure, which is more conducive to the disassembly and maintenance of the joint. service conditions： maximum pressure：1.5mpa　 maximum temperature：120℃ maximum speed：200rpm medium: water cooling liquid、ethylene glycol.

• MOQ 1 Piece

We are offering Ygs-type Rotary Joint. ygs high temperature rotary joint.