Kingding Industrial Co., Ltd.

Changzhou, Jiangsu Province, China

The products have passed ce certification features ■ basic measurement accuracy: 0.25% ■ gorgeous dual-colure cast shell ■ maximum test signal frequency: 100khz（th2822c） ■ 40, 000 counts for primary parameter, d/q resolution 0.0, 001 ■ typical ultra-low consumption : 22ma battery capacity: th2822/th2822a，continuously used for 16hours th2822c rechargeable batteries are optional ■ innovatively compatible terminal configuration : 5-terminal test slot and 3-terminal banana jack ■ intelligent auto lcr function ■ measurement speed up to 4 meas/sec, fast automatic range switch design ■ constant output impedance: 100 ohm ■ percentage display and 4-tolerance comparator: 1%, 5%, 10%, 20%(20% not available for th2822) ■ automatic open/short correction detection ■ data hold, max/min/ average recording ■ practical function configuration and current setup recovery after power-off ■ standard mini-usb interface, scpi compatible ■ firmware update through mini-usb interface ■ free fastaccess communication software on our website-------------------------------------------------------------------------------- brief description th2822c adopts the ultra-low dissipation design and high density smd assembly techniques and can simultaneously display primary and secondary parameters by the use of backlit lcd display. The dual-color shells are gorgeously once shaped; functions are easy to operate. Gorgeously once shaped dual-color shells and easy operating functions are the characteristics of the meter. The test frequency is up to 100 khz, the readings of primary parameter 40, 000 counts and the resolution of dissipation factor 0.0, 001. Accurate and convenient measurements of passive-components can be achieved in all occasions for a long time. for more information visit:www.kd-precision.com product model: th2822c lcr tester series basic accuracy 0.25% equivalent circuit serial and parallel range mode auto, hold correction function open/short sweep correction test function test signal others

Technical characteristics: � Standard configuration figure 4 in GB12113, Compliant with MD demand in new standard GB4706.1-2005. � Inner high speed 32 bits ARM processor � Network card and test bandwidth is DC-1MHz � Plug MD card, MD can be changed to satisfy other industrial standard � Upper and lower limit leakage current preset function, intelligent judgment, voice and light alarm � Adopt VFD display, simple operation � Remote interface, RS232/485 interface function � Smaller size and more beautiful;appearance.