Lisun Electronics (Shanghai) Co., Ltd.

Shanghai, China

Lsg-3000 moving detector goniophotometer completely meets lm-79 clause 9.3.1 requirement. The lsg-3000 is an automatic light distribution intensity 3d curve testing system for measuring light. The measuring distance is from 5m to 30m. It can measure all types of lighting sources, led or hid luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.

Automatic lighting surge generator (or Lighting surge immunity) SG61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by the high-energy transient interference performance. Performance fully meets the IEC 61000-4-5, EN61000-4-5 and GBT17626.5 standards.

It is according to IEC60068-2-1(GBT2423.1) and IEC60068-2-2(GBT2423.2). It is used to test the CFLLED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification: •The chamber is produced by SUS304 Steel, the temperature keeping material is produced by Polyurethane hard foam and ultra-fine fibre glass, the doorframe heat insulated by Double high temperature aging silicone rubber door sealing strip. •The temperature controller is used by Korean TEMI display in EnglishChinese and German Siemens PLC, it can be communicated to PC via RS-232. The temperature accuracy is 0.1℃ and humidity is 0.1%R.H •The temperature sensor is platinum PT100 OhmsMV resistor •The heating system is full separately system which produced by Nickel chromium alloy electric heating type heater •The cold system is applied by fully enclosed fan cooled single-stage and cascade refrigeration mode, the compressor is from France TECUMSEH brand which can allow you get after sales support from many countries •The cyclical system is applied by High temperature low noise air conditioning type motor and Multi blade centrifugal wind wheel

We are offering lsg-1800blsg-1700blsg-1600b rotation luminaire goniophotometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The lsg-1800b is an update version for lsg-1800, the lsg-1800b use a constant temperature detector, japanese motor and germany precision angle coder which keeps high test accuracy. It is for industrial laboratory measurements the photometric data of luminaries such as led luminaries, hid lamps, fluorescent lamps and so on.

We are offering led test integrating sphere with ccd spectroradiometer. Lpce-2(lms-9000) is high precision ccd spectroradiometer & integrating sphere test system, it is suitable for photometric and colorimetric measurement of luminaries such as energy-saving lamps, fluorescent lamps, hid lamps (high voltage sodium lamps and high voltage mercury lamps), ccfl and led. The measured data meets the requirements of cie, en and lm-79 clause 9.1 for the measurement of photometry and colorimetry.

We are offering led light tester lpce-3(lms-7000vis) is ccd spectroradiometer & integrating sphere test system, it is suitable for photometric and colorimetric measurement of luminaries such as leds, led luminaires, energy-saving lamps, fluorescent lamps, hid lamps (high voltage sodium lamps and high voltage mercury lamps) and ccfl. The measured data meets the requirements of cie, en and lm-79 clause 9.1 for the measurement of photometry and colorimetry.

We are offering led power driver tester. Wt2080 led power driver test instrument is the comprehensive test instrument for led drive power which is according to gbt 24825-2009 and iec 62384:2006. It can measure the following parameters: input characteristics test (ac&dc), output characteristics test (ac&dc), output start characteristics test (dc) and harmonic testing. specification: 1. Input characteristics test (ac) • to measure the input voltage, current, power, power factor, power grid frequency • the fundamental frequency scope of the current and voltage: 45hz~65hz; narrowband range: 45hz~5khz; broadband range: 45hz~1mhz. • voltage range: 3~300 v (cf=1.67); current range: 5ma ~ 2.7a (cf=3); power range: 0.015~800 w; power factor range: 0.000~1.000.

Jl-x waterproof test system is according to iec60529, iec60598, iec60335 and iec 60034-5:2000. The jl-x includes the following test grades: ipx1, ipx2, ipx3, ipx4, ipx5, ipx6, ipx7 and ipx8 (refer to page 51 of iec60529). It is widely used in the authentication test organization for the products such as electrical & electronic products such as led luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades.