Luan Jietonda Chemical Co Ltd

Luan, China

Film hardening agent for powder coatings Jietonda® SA501 is a modified PTFE wax used for powder coatings to increase hardness and smoothness of film. 1. Typical properties Appearance White fine particles or powder [visual] Volatiles (%) ≤1.0 [GB 1725] Herein described to be typical properties and do not constitute specification limits. 2. Characteristics  For almost all kinds of powder coatings system.  Increase hardness of film, and also provide excellent flow and smooth appearance  Good dispersing ability.  Increase the wettability of pigment dispersing. 3. Use method & levels  Premix SA501 with other components of the formula before extrusion.  The use level is 0.5-1% by weight, calculated on total formula weight. 4. Package & Storage  Packaging with PE lined Kraft paper bags. Net weight 25kg per bag.  Store in temperature between 2-32℃ or cool dry place to avoid caking. Keep package closed after using. Keep away from heat and fire.  Based on our experience the shelf life of this product under above conditions is at least 2 years.

• MOQ 240 Kilogram

Textured additive for powder coatings Jietonda® SA2072 is pre dispersed texture additive which can be used in powder coatings to give a fine grained finish surface. 1. Typical properties Appearance Off-white very fine powder [visual] Melting ranges (�) 310-330 Bulk density (gl) 250-350 [GBT 1636] Herein described to be typical properties and do not constitute specification limits. 2. Characteristics � � Be applicable to any powder coating systems such as pure epoxy, hybrid, PESTGIC or PESHAA and PU etc to provide a special texture finish with fine-grained surface. � � A low cost texture additive, save the budget � � Flow modifier and Benzoin in powder formulation can be omitted or decreased greatly. Therefore, the cost of powder coating is down probably. 3. Use method & levels � � Premix SA2072with other components of the formula before extrusion. � � The use level is 0.1 ~0.2% based on the total weight of the formulation. 4. Package & Storage � � Packaging with PE lined fiber drums. Net weight 10kg or 20kg per drum. � � Store in cool and dry place. Avoid contacting with strong acids, bases and other organic chemicals together. Keep away from heat and fire. � � Based on our experience the shelf life of this product under above conditions is at least 2 years.

Jietonda® K7921 Adhesion enhancing agent powder for powder coatings Jietonda® K7921 is a latest developed adhesion enhancing agent with high efficiency. It can improve the wet ability & adhesion of powder coatings to substrate. 1. Typical properties Appearance white fine powder [visual] Volatile (%) ≤1.5 [GB1725] Herein described to be typical properties and do not constitute specification limits. 2. Characteristics  Can used in powder coatings like PESTGIC, PESHAA, Hybrid, Epoxy, Acrylate & Polyurethane.  Can improve the wet ability & adhesion of powder coatings to substrate.  Can improve the adhesion after boiling in water. 3. Use method & levels  Premix K7921 with other components of the formula before extrusion.  The use level is 0.5-2% based on total formula by weight. 4. Package & Storage  Packaging with PE lined drum. Net weight 10kg20kg per bag.  Store in cool dry place. Keep away from heat and fire.  Based on our experience the shelf life of this product below 32℃ is at least 2 years.

• MOQ 500 Kilogram

Slip and Degassing agent for powder coatings Jietonda® SA500 is a micro wax based slip and degassing agent developed especially for powder coatings, which can be used as a slip promoter or a substitute of benzoin in various coating system. 1. Typical properties Appearance White fine powder [visual] Melting ranges (�) Ca.140 Volatile (%) �0.5 [GB 1725] Herein described to be typical properties and do not constitute specification limits. 2. Characteristics � � Aid to reduce coating melt-flow viscosity and improve wetting of resin binder to substrate and pigment dispersing properties. Therefore, the smooth surface and better appearance can be obtained. � � Can be used as a substitute of benzoin in powder coatings to impart better degassing and less yellowing effects. Especially, used in β-HAA system, to provide weather-resistant coating with more satisfied properties such as film thickness up to 100μm without air-bubble. � � Due to its own lubricating character, improve the anti-caking and sieve-passing properties of coating powder and prevent blockage of spray gun simultaneously. � � Exhibit good anti-mar property at proper added amounts. 3. Use method & levels � � Premix SA500 with other components of the formula before extrusion. � � The use level is 0.5-1.0% by total weight of formula. 4. Package & Storage � � Packaging with PE lined Kraft paper bags. Net weight 20kg per bag. � � Store in temperature between 2-32� or cool and dry place. Keep package closed after using. Keep away from heat and fire. � � Based on our experience the shelf life of this product under above conditions is at least 2 years.

Charge enhancing agent for powder coatings Jietonda® SA2483 is a long-chain fatty acid ester used as charge-enhancing agent to improve powder coating transfer-efficiency and minimize Faraday-Cage effects during application. 1. Typical properties Appearance white to pale yellow powder [visual] Melting point (℃) Ca. 60 Acid value (mg KOHg) ≤5.0 Herein described to be typical properties and do not constitute specification limits. 2. Characteristics 　 ● Enhance the conductivity to improve powder coating transfer-efficiency, application performance and minimize Faraday-Cage effects during electrostatic powder spray. 　 ● Differing from general amine based charge-enhancing agent, SA2483 provides improved substrate wetting to result in better flow and appearance of powder coatings. 　 ● Quite good thermo-stability and anti-yellowing. 　 ● Have no catalytic activity, does not affect the gloss and gel time of coat. 3. Use method & levels 　 ● Premix SA2483 with other components of the formula before extrusion. 　 ● The use level is 0.3-0.6% by weight calculated on total formulation. 4. Package & Storage 　 ● Packaging with PE lined Kraft paper bags. Net weight 25kg per bag. 　 ● Store in temperature between 2-32℃ or cool dry place to avoid caking. Keep package closed after using. Keep away from heat and fire.

Hardener for epoxy powder coatings jietonda® sa2830 is a micronized modified dicy, which used as latent curing agent in pure epoxy powder coatings. 1. Typical properties appearance free flow, very finely white powder [visual] dv50 (μm) ≤11 melting range (℃) 209-212 herein described to be typical properties and do not constitute specification limits. 2. Characteristics 　 ● can be used individually or in combination with other materials. 　 ● highly reactive activity. 　 ● can disperse into liquid resins easily and uniformly. 3. Use method & levels 　 ● premix sa2830 with other components of the formula before extrusion. 　 ● the curing condition of 180℃15min is suggested. 　 ● approx. 3.5-4.5 parts calculated on 100 parts of epoxy resins (eew 700-900) by weight. 4. Package & storage 　 ● packaging with pe lined kraft paper bags. Net weight 20 kg per bag. 　 ● store in temperature between 2-32℃ or cool dry place to avoid caking. Keep package closed after using. Keep away from fire. 　 ● based on our experience the shelf life of this product under above conditions is at least 2 years.

• MOQ 500 Kilogram

β-haa hardener for polyester powder coatings jietondaâ® sa3120 is a poly-functional î²-hydroxyalkylamide cross linking agent. As a substitute of tgic, it is suitable for curing with carboxyl-terminated polyester or acrylic resin to provide tgic-free based exterior durable powder coatings. 1. Typical properties appearance off-white powder [visual] melting ranges (â��) 120-128 hydroxyl equivalent weight 80-84 volatiles (%) â�¤1.0 [gb 1725] herein described to be typical properties and do not constitute specification limits. 2. Characteristics ã�� â�� non-toxic compared with tgic, the resulting tgic-free based exterior durable powder coatings are non-toxic, non-irritant to skin and safety to human body. Ã�� â�� proven weather-resistance and low temperature curing (150â��) property. Ã�� â�� exhibited enhanced charging properties so better powder transfer efficiency could be obtained. Ã�� â�� excellent flow and mechanical properties. Ã�� â�� improved anti-yellowing when used in combination with our developed specific degassing agent jietondaâ® sa500. 3. Use method & levels ã�� â�� premix sa3120 with other components of the formula before extrusion ã�� â�� recommend to design formula by weight parts of 955 [resin to sa3120] for polyester resin with av ca.34mg kohg; 96.53.5 for polyester resin with av ca.22mg kohg. 4. Package & storage ã�� â�� packaging with pe lined kraft paper bags. Net weight 25 kg per bag. Ã�� â�� store in cool dry place to avoid caking. Keep package closed after using. Keep away from heat and fire. Ã�� â�� based on our experience the shelf life of this product under above conditions is at least 2 years.

Matting agent for hybrid powder coatings Jietonda® SA2165D is a synthetic resin based matting agent for hybrid powder coatings, which is designed for satisfying wide ranges of curing of requirements, having universal applicability to any polyester resins, whether fast-curing or not. The use of this product can provide ranges from 8-60%(60°) of low gloss, excellent flow and outstanding anti-yellowing. 1. Typical properties Appearance white to pale yellow powder [visual] Soft point (℃) 128-134 [Ring & Ball method] Bulk density (gL) 550-650 [GBT 1636] Herein described to be typical properties and do not constitute specification limits. 2. Characteristics  Almost suitable for any 5050 or 6040 type hybrid polyester resins without remarkable selectivity, whether fast-curing or not.  Can satisfy wide ranges of baking requirements to result in gloss-stable, excellent flow, and outstanding mechanical properties. The low temperature curing of 160℃25min or 170℃20min can be achieved depend on the particular fast-curing polyester used in formulation.  Excellent overbaking stability.  Eliminating effectively fingerprint on coating surface.  The recoatability and transfer-image properties of coatings are not influenced. 3. Use method & levels  Premix SA2165D with other components of the formula before extrusion.  The use level is 1- 4.5% based on total formulation by weight, depends on the gloss required.

• MOQ 500 Kilogram

Matting agent for PolyesterTGIC powder coatings Jietonda® K7216 is a synthetic resin based matting agent designed for applying in exterior PESTGIC powder coatings with excellent flow and weather-resistance . 1. Typical properties Appearance Pale yellow powder [visual] Solid content (%) �98.0 [GB 1725] Herein described to be typical properties and do not constitute specification limits. 2. Characteristics � With proper resin, it can provide 12% (60°)or less of gloss (suggested to choose slow curing polyester, should not be used alone with fast curing polyester). � Fine and smooth surface. � Good stability for baking, recommended to use on anti-yellowing condition. � Outstanding mechanical properties, much better scratchfriction resistance than PEGMA matting system. � Outstanding gloss stability and reproducibility, satisfy wide ranges of extrusion processing. 3. Use method & levels � Premix K7216 with other components of the formula before extrusion. � The use level is 2-6% by weight of total formula, depends on the gloss required. 4. Package & Storage � Packaging with PE lined Kraft paper bags. Net weight 25kg per bag. � Store in temperature between 2-32� or cool dry place to avoid caking. Keep package closed after using. Keep away from heat and fire. � Based on our experience the shelf life of this product under above conditions is at least 1 years. 5. Advisement � When formulating K7216, the gloss of coating will be determined by its concentration and the selected polyester resins. It is important to select matched resins.

• MOQ 500 Kilogram

Jietondaâ® sa206a matting agent for polyestertgic powder coatings jietondaâ® sa206a is a physical matting agent based on modified polyethylene wax, which is designed specially for outdoor durable pestgic powder coating to provide ranges from 30-70% (60â°) of gloss and smooth matte finishes. It can also be used in other powder coatings endowing with appropriate semi-gloss. 1. Typical properties appearance pale yellow powder [visual] soft point (â��) 114-120 [ring & ball method] bulk density (gl) 450-550 [gbt 1636] herein described to be typical properties and do not constitute specification limits. 2. Characteristics ï�¬ offering minimum 30-70% ( 60â°) of gloss for pestgic powder coating without significantly damaging to the weather-resistance, flow and mechanical properties. Ï�¬ can also be used in other coating systems such as pure epoxy and epoxy-polyester hybrid to provide semi-gloss, smooth appearance and good non-yellowing properties. 3. Use method & levels ï�¬ premix sa206a with other components of the formula before extrusion. Ï�¬ it is non-recommended to use under the loading over 3% based on total weight of formulation because of poor free-flowing, wet blocking of powder or spray gun plugging problem etc. 4. Package & storage ï�¬ packaging with pe lined kraft paper bags. Net weight 25kg per bag. Ï�¬ store in cool dry place to avoid caking. Keep away from heat and fire. Ï�¬ based on our experience, the shelf life of this product under above conditions is at least 2 years. 5. Advisement ï�¬ choose proper accelerator or catalyst to improve the impact resistance, but this will result in unexpected gloss up or worsen surface leveling. Ï�¬ there may be somewhat waxy releaser on surface for black or dark color powder coatings.

Degassing agent for powder coatings Jietonda® Benzoin is an organnic compound which developed as a degassing agent for powder coatings. 1. Typical properties Appearance White fine powder [visual] Melting ranges (℃) 125-135 Volatile (%) ≤1.0 [GB 1725] Herein described to be typical properties and do not constitute specification limits. 2. Characteristics  The function of Benzoin is to eliminate bubbles in the melt coatings which will create pinholes in coatings film. It can be applied in all categories of powder coatings. 3. Use method & levels  Premix Benzoin with other components of the formula before extrusion.  The use level is 0.3-0.8% by total weight of formula. 4. Package & Storage  Packaging with PE lined Kraft paper bags. Net weight 25kg per bag.  Store in temperature between 2-32℃ or cool and dry place. Keep package closed after using. Keep away from heat and fire.  Based on our experience the shelf life of this product under above conditions is at least 2 years.

Matting agent for hybrid powder coatings Jietonda® K7225 is a wax-free, non-reactive and synthetic resin based matting agent designed for hybrid powder coating to provide 5-60%(60°) of gloss. It features suitable to standard curing condition, excellent flowfineness surface, and outstanding gloss stability after re-extruded operation. 1. Typical properties Appearance pale yellow powder [visual] Acid value (mg KOHg) 105-120 [ASTM D1980] Bulk density (gl) 340-440 [GBT 1636] Herein described to be typical properties and do not constitute specification limits. 2. Characteristics � � Jietonda® K7225 is preferentially recommended as matting agent used in 5050 type of hybrid powder coatings to provide gloss ranges from 5-60%(60°) . �� � Excellent flow. �� � Outstanding gloss stability after twice extruded. �� � Better gloss-reducing effect at lower use levels. �� � Good anti-yellowing. �� � Better gloss consistency for both white and black coatings. �� � Wide range of applicability to polyester resins. 3. Use method & levels � � Premix K7225Fwith other components of the formula before extrusion. �� � The use level is 1-4.5% by weight based on total formula, depends on the gloss required. 4. Package & Storage � � Packaging with PE lined Kraft paper bag. Net weight 25kg per bag. �� � Store in temperature between 2-32� or cool dry place. Keep away from heat and fire. �� � Based on our experience the shelf life of this product under above conditions is at least 2 years. 5. Advisement � � Choose proper accelerator or catalyst to improve the impact resistance, but this will result in unexpected gloss up or worsen the surface leveling.