Mudanjiang Honglin Chemical Co. Ltd.

Mudanjiang, China

• MOQ 14 Kilogram
• Moisture (%)≤8.5
• PH(2% water solution)2.8~4.8
• AppearanceBrown powder

• MOQ 14 Metric Ton
• AppearanceDark Brown Powder

FCLS is a specially dilution agent and fluid loss control agent used in drilling fluids. It is characterized by resistance to high temperature and salt, and can be used with other admixture agent etc. All its indexes of the product have already reached standards of China�s natural gas industry (SYT5702-95). A.Physical and chemical index: Item Requirement Appearance Blackdark brown powder Material insoluble to water % �2.5 Moisture % �8.5 CaSO4calcium sulfate % �3.0 Total Fe % 2.5~3.8 Total Cr % 3.0~3.8 Thin (0.66mm surplus of sieve) % �3.0 B. The Methods of Use 1.The excellent thinning property of FCLS, which shows powerful anti-electrolytes capacity. And it is suitable to all kinds of dispersed mud. 2. Be effective at temperature more than 150~160�.It can get better effect when cooperated with lignite derivatives. 3. FCLS may be added into drilling fluid in the form of aqueous solution or powder. To keep PH index at 9.5~10.5, the recommended dosage of thinner is 0.5~1.0 %.

• MOQ 14 Metric Ton
• PH(10%water solution)2.5~4.5
• AppearanceBlackish brown powder
• Moisture (%)≤8.5
• Total Cr (%)3.6~4.2

• MOQ 14 Metric Ton
• PH（1%water solution）3.0～4.5
• Total Cr %2.1~2.5
• Moisture %≤8.5
• Total Fe %2.8~3.2
• AppearanceBlackish Brown Powder

• PH(2% water solution)2.8~4.8
• Moisture (%)≤8.5
• AppearanceBrown powder

• MOQ 14 Metric Ton
• Rate of water-reducing(ï¼…)≥ 8.0
• Reduced material(%)≤ 12.0
• Water Insolution (ï¼…)≤ 2.5
• CaSO(ï¼…)≤3.0
• PHPH 9.0～11.0
• Moisture content (ï¼…)≤ 8.0

Sodium lignosulfonate (SLS) is a processed anionic surface agent with good performance. It takes the pulp of red liquor with sulfite processing after contraction and chemical processing as raw material. It has powerful dispersive action and damping action. It has been used widely in many fields of construction , ceramics and agricultural chemical etc. 1. Range of Application A. SLS can be applied to site cast concrete and commercial concrete, prestressed concrete, pumping concrete, concrete with the capacity of anti-permeability anti-freeze, low slump-loss, big mold plate and synovimuming engineer. B. SLS can be used both alone, and combined with other admixtures, or made into many kinds of concrete addition agents with good performance. C. SLS is a kind of binder and body reinforcing agent in the fields of metallurgy and ceramics. 2. Use Direction and Notice A. The recommended dosage is 0.20~0.30%(accounting for the proportion of cement), or confirm the most suitable dosage after tests with different variety of cements and engineering . B. SLS works better in the form of water solution, but it also can be used directly with longer stirring time, in order to stir evenly. C. SLS must be tested before being used in the fields of petroleum, metallurgy and ceramics. 3. Packing storage and transport A. Net weight is 25kg per bag, sealed in woven bag with plastic film inside. B. Keep it where it is ventilated and dry, free from wet and rain as well. If there is lump phenomenon due to improper storage, it has the same performance after being made up water solution. C. SLS is non corrosive, non flammable and non explosive material.

• MOQ 14 Metric Ton
• Reduced material(%)≤ 12.0
• Moisture content (ï¼…)≤ 9.0
• PH7.0～9.0/4.0～6.0
• Water Insolution (ï¼…)≤ 2.5
• Rate of water-reducing(ï¼…)≥ 8.0

Calcium Lignosulfonate (CALS) is a processed anionic surface agent with good performance. It takes the pulp of red liquor with sulfite processing after contraction and chemical processing as raw material. It has been used widely in construction, ceramics and metallurgy etc. The CALS has advantages of being used with little volume to admixture, cheap price, used easily and improving the performance of concrete effectively. 1. Performance. As a concrete water reducer, CALS's rate of water-reducing can reach more than 10%, the reinforcement of concrete can be above 10%. It can reduce collapse losses, improve the performance of concrete and have no corrosive effect on steel bar. 2. Use Direction and Notice (1) The recommended dosage is 0.20~0.30%(accounting for the proportion of cement), or confirm the most suitable dosage after tests with different variety of cements and engineering . (2) CALS works better in the form of water solution, but it also can be used directly with longer stirring time, in order to stir evenly. (3)CALS can be applied to site cast concrete and commercial concrete, prestressed concrete, pumping concrete, concrete with the capacity of anti-permeability anti-freeze, low slump-loss, big mold plate and synovimuming engineer. (4) CAL can be used both alone, and combined with other admixtures, or made into many kinds of concrete addition agents with good performance. (5) CALS must be tested to determine the optimum adding amount before being used in the fields of petroleum, metallurgy and ceramics. 3. Packing storage and transport (1) Net weight is 25kg per bag, sealed in woven bag with plastic film inside. (2) Keep it where it is ventilated and dry, free from wet and rain as well. If there is lump phenomenon due to improper storage, it has the same performance after being made up water solution. (3) SLS is non corrosive, non flammable and non explosive material.