Nextcore Electronic Industry (hk) Co.,Ltd

Dongguan City (东莞市), China

• MOQ 100 Piece(s)
• Country of Origin9-48V

We offer solenoids are basically electromagnets: they are made of copper wire winding with an plunger/cylinder (a slug of metal) in the middle. When the coil is energized, the plunger is pulled into the center of the coil. This makes the solenoid able to pull from one end. The solenoid lock have same work method! generally the lock have 12v/24v dc type. And the manufacturer can adjust the coil turns to achieve customer's requirments. 12v/24v dcsolenoid lockspecification: p/n: door lock solenoid nc-0837l-12v/24v materials: copper lines, matal, cable related voltage: 12v/24v dc stroke vs force 50grams @ 10mm power 8 wattages mounting hole: 6.8*3mm/0.26"*0.12"(l*w) insulation resistance: 100m ohms, 500v dc dielectric voltage 700v dc per seconds life cycle 1, 000, 000 cycle min color silver this solenoid in particular is nice and strong, and has a plunger with bolt and a good mounting bracket. It's basically an electronic lock, designed for a basic cabinet or safe or door. Normally the lock is active so you can't open the door because the solenoid bolt is in the way. It does not use any power in this state. When 9-12vdc is applied, the slug pulls in so it doesn't stick out anymore and the door can be opened. the solenoids come with the slanted plunger as shown above, but you can open it with the two screws and turn it around so its rotated 90, 180 or 270 degrees so that it matches the door you want to use it with. to drive a solenoid you will a power transistor and a diode. You will need a fairly good power supply to drive a solenoid, as a lot of current will rush into the solenoid to charge up the electro-magnet, about 500ma, so don't try to power it with a 9v battery!.

• MOQ 100 Piece(s)
• Fluid mediaAir, gas
• Country of Origin12V 24V DC

• MOQ 100 Piece(s)
• Country of OriginDC 24V

We offer 1.dc 24v tubular solenoid2.100% ed cycle3.stroke 5mm, 1.2n attractive force4.voltage:dc 24v5.assembly easily nc-1939l/s series tubular solenoid 1. Solenoid parameter for reference: working voltage: dc 24v ± 10% dc resistence: 85 ω ± 5% wattage: 6.8w duty cycle: 10%, 25%, 50%, 75%, 100%ed insulation class: class b stoke: 5 mm force: 1.2n (min) dimensions: ø19.56*39.37mm leadwire strength: 0.5 kgf operating temp/humidity -10%°c-+40%°c 10%rh-95%rh

• MOQ 1000 Piece(s)
• bobbinplastic
• Materials180 degree copper line

• MOQ 100 Piece(s)
• VoltageDC 12V/24V

We offer dc holding electromagnet. Electromagnet, used for security devices, manipulator, all kinds of game machine, the characteristic, quality, reliability and feasibility of each item is repeatedly tested during design and processing stage for a better performance as statistic qc system therefore is introduced during production to assure the best possible output excellent quality, reliable technical background, plus competitive price and service, we are the right one who really deserves you to trust nextcore solenoids electronic componentcustomer design solenoidvoltage: 3-48vdch-quality stable solenoidelectronic-magnetto individual applications. To efficiently find best fit model, please consider & offer specific requirements and conditions of your application:what product do you use solenoid for?to pull or push when power on? (latching when power off? )force/stroke (pull or push distance) needed?prime output. Force drops sharply while stroke goes longer, so design stroke needed as short as possible.power (max. ) on time / off time (duty cycle, ed%)?solenoids heat up when power on, heat sinks when power off. Balancing with power to avoid overheating.power supply: volts dc or ac? stable? any limits on watts or amps?return spring needed? (springs probably offset solenoid force! it is unnecessary if load force can resets) ​some of the solenoid selection criteria are stroke and pull force required by the application. To select a best suited solenoid, please also consider the duty cycle and the wattage applied.