NingboNideMechanicalEquipmentCo.Ltd.

Ningbo, China

Enter and Exit Station Stator Coil Middle Forming Machine is used for stator winding middle forming, it is mainly driven by the hydraulic system, controlled by industrial PLC. 5 pieces individual cylinder execute external wrapping, internal expansion, overhanging end forming. It is of fast tooling change and extensive compatiblity property.The enter and exit station is much convenient and safe for loading and unlaoding stator.I. Technical parameter Stator I.D 30~110mm Stator O.D â�¤160mm Stack heigh 30~150mm Displacement of cylinder 20F Power supply 380V5060Hz 3.75Kw Weight 800Kg Dimension L1300*W1000*H2400mm II. main components PLC: Mitsubishi Oil pump: Jingyuan Sensor: Autonics Buttonswitch: Schneider Other electric elements: DelixiSchneider   III. Machine main function and characteristic 1. This machine adopts whole hydraulic system and PCL program. 2. This machine could adjust the forming stack length by changing washer. 3. This machine has five oil cylinders which work individually to expend inner coil, wrap outer coil and form hang over. 4. After forming, there is no copper wire enamel broken or wire snap, and coil OD and ID is close to the final forming dimension. 5. Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward.There is no wire enamel broken. 6. Production capacity â�¤15sset (exclude loadingunloading time) 7. Primary qualification rate â�¥98.5%, after rework, thwww.nide-auto.com

Application: the automatic needle winding machine id suitable for bldc motor stator winding, such as stepping motor, brushless motor, fan motor, bladeless fan motor, servo motor, etc. Features:  1.double stations, it could be designed for four stations. 2.during high speed winding, the winding process can be controlled, it automatically complete winding, 3.indexing, hanging wire, hanging the wire head and wire end and cutting wire. Technical specification: item specification wire diameter: 0.08~1.2mm min. Stator id 6mm max. Stator od two sations-260mm, four   stations-120mm       max. Winding speed 600rpm; for 1.0mm wire, the winding speed is about 200~260rpm; 0.15~0.45mm wire: winding speed is adjustable within   0~450rpm; 0.45~1.0mm wire: winding speed is adjustable within   0~300rpm;   cycle time for 1.0mm diameter wire 39turns 12slots stator, about   4~4.5mins2pcs max stator stack length 120mm power supply single phase 220v, 5060hz air pressure 6kgcm2 machine dimension w850*l1000*h1600mm weight about 500kg operation step1.  power on the machine2. Thread the wire3. Put stator to the working station table4. Adjust the tooling according to different model stator5. Set the stator diameter in the touch screen then select the pre-set data.6. Press "start" button.7. Machine will automatically do winding.8. Take out the stator sample wound by this needle winding machine

This automatic stator coil needle widing machine is controlled by PLC. All the parameter could be set on the touch screen, which display the windng data, alarm information and other data. The coil winding parameter can be set as per customer's requirement. This stator winding machine is easy to operate, only need to load and unload stator. This Stator Needle Winding Machine is suitable for  BLDC motor stator or stepper motor stator with 6 slots, 9 slots and 12 slots stator. Machine can automatically do winding process, indexing process and wire cutting process. Techanical parameter Voltage AC220V, 5060Hz Total power 2KW Stator O.D 15~65mm Wire diameter 0.1~0.7mm Stator stack length 7~100mm Turn number 0~99999 Slot number 6 poles, 9 poles, 12 poles Productivity 3~4minpc Air pressure 5~7kgcm2 Weight 450Kgs Dimension 1600*1100*1400mm Application: This needle winding machine is used for winding BLDC motor stator or stepper motor stator with 6 slots, 9 slots and 12 slots stator.  Competitive advantages Variety of application, easy operation. We have Overseas Service Center. Machine is controlled by PLC. All the parameter can be set in the touch screen. It is suitable for stators with different model number and dimension. The operation and tooling change process is easy. We could customize machine for our customer as per their requirement. We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil

Equipped with touch screen, this automatic BLDC winder machine movement can be set in the touch screen, inculuding winding speed, wire diameter, turn number, indexing angle etc. All the parameter could be set on the touch screen. It  is suitable for multi-pole stator or BLDC motor stator to do winding. This  automatic stator winding machine could do indexing, winding, wire cutting automatically. Operator only needs to load and unload stator. Technical parameter: Stator O.D 15~65mm Wire diameter 0.1~1mm Stator stack length 7~100mmm Turn number 0~99999 Slot number 4 poles Productivity 3~4minpc Air pressure 5~7Kgcm2 Total power 2KW Voltage AC220V, 5060Hz Weight 450KGS Dimension 1500*900*1450mm Competitive advantages Variety of application, easy operation.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.We could customize machine for our customer as per their requirement. We have Overseas Service Center.This machine is controlled by PLC. All the parameter could be set on the touch screen Information needed for BLDC Stator Coil Winding Machine inquiry It will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementIf possible, it will be better if customer can send us samples. stator wound by this insot needle winding machine

Automatic stator coil lacing machine Due to the four working station, this automatic stator coil lacing machine is of high automation.Moreover, this lacing machine is equipped with a conveyor to transfer the stators. It is controlled by PLC, and all the parameter can be displayed and set in the touch screen. The stator coil lacing machine can store different stator parameter.  During lacing process, operator load the stators, then the machine will automatically do the lacing process. Technical data of lacing machine Stator OD φ40-φ160 mm Stator ID ≤100 mm Stack Height 30-160 mm Height of Coil ≤65 mm Pitch time ≤14spc(24 slots) Air Pressure 0.4-0.6MPa Power supply 380V   5060Hz 6Kw Weight ≈1500Kg Dimension (L)2000×(W)1100×(H)1900mm ApplicationIt is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor. Machine main function and characteristicThis machine adopts turntable plates structure with four working station, equipped with stator pressing device, auto feeding device, auto wire feeding device, auto knotting device, auto cutting device and ect. Overhang winding adopts twin needle lacing simultaneously. Needle transpositioning, hooking and stator indexing are controlled by five spindle servo system. Different lacing pattern can be set, such as slot by slot lacing, interval slot lacing and fancy lacing. With fast speed, low noise, simple operation and easy tooling change

Automatic stator coil wave winding machine ring winding machine  this automatic stator coil winding machine is suitable for alternator stator to do winding. With two working station, this machine can be winding two coils.    main feature:  winding spindle drive by servo motor, wire feeding, cutting and winding are completed automatically. It could use for one wire or two wire parallel winding, transfer form indexing is automatically, the machine is special suitable for automobile alternator stator coil winding.   specifications: min stator id 80mm max stator od 160mm max stator height 55mm wire diameter 0.5-1.8mm max wind rpm 250rpm power supply 380v5060hz voltage 4kw weight about 1200kg machine dimension 1850*2100*2000mm information needed for automatic stator wave winding machine inquiryit will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementif possible, it will be better if customer can send us samples. The automatic stator coil winding  machine picture the automatic stator coil winding  machine youtube video.

Machine function and characteristic: this inner stator insulation paper inserting machine adopts mechanical driven system, servo system and pneumatic system. As a result, the paper inserting machine can automatically do positioning, pressing, paper feeding, paper forming, paper pushing. The paper edge can be auto chamfered so as to solve the winding problem caused by paper, and improve the percent of pass of stator. This machine is easy to operate, of high automation.  technical parameter of inner stator insulation paper inserting machine : stator od: ≤135mm stack height:10-100mm material's thickness:≤0.35mm pitch time:≤1sslot air pressure:0.4-0.6mpa power supply:220v   5060hz 3kw weight:≈400kg dimension:(l)1500×(w)650×(h)1480mm control method: plc application of inner stator insulation paper inserting machine : it is suitable for series motor, bldc motor and stepping motor stator. This design of this series inner stator insulation paper inserting machine is based on a consideration of easy operation. Normally, operator only needs to load the stator to the working position. Then machine will automatically do the paper inserting after start button is pressed. This machine is suitable for series motor, bldc motor and stepping motor stator. All the parameter can be set in the touch screen, such as paper length, paper feeding speed, slot number, stator dimension.

Armature aluminum die casting machine Our armature die casting machine has a high working efficiency, 10-12spcs, 300-400pcshour, it only takes one day for green hands becoming practician, and 10min to change mould.  Unlike the conventional die casting machine, our machine doesn't need asbestine cup to keep the temperature and demould. operator only need to press "start" button, no need to handling the heavy tooling which might occur body injury, and the machine has aluminium anti spatter design to prevent the aluminium liquid from spraying and cause injury. During die casting, machine will transfer the residual aluminum to the smelter in time. Since the residual aluminum still has a high temperature. It is cost saving and time saving. Besides, the injection system of our machine is patented. The injection head can be used for about 1-2 months, while the injection cylinder for more than half year. Since the injection head and cylinder are easy consumed parts, therefore, our design also reduce the changeover frequency and cost of production.   This armature die casting machine is consisted of main machine and hydraulic electronic control system . 1.Main cylinder mould locking system 2. injection system 3. residual aluminum(sprue)pushing and conveying mechanism 4. automatic demould oil spraying 5.lower mould cooling system 6. lubricating system of puncher pin and molten aluminum container 7.Lower mould rotation system 8. Mould assembly system

BLDC motor automatic needle winder This needle winder is used to wind BLDC motor stator.  It is designed with two working station and two winding flyers. Because of  its advanced technology, it can automatically  insert wire end, winding, arraying, indexing, cutting, demolding.  In the same time,  this needle winder can diagnose fault, count output, etc. Other processes like auto winding, multi-diameter wires winding, auto indexing, auto skip slot and winding speed could be programmed in the touch screen.   Technical parameter    Stator ID    ≥25mm    Stator OD    ≤150mm    Stack height    10~100mm    suitable wire diameter    0.3-1.0mm    Power supply     220V 5060Hz     Weight    600KG    Dimension    1400*900*2000mm  Operation step1.  Power on the machine2. Thread the wire3. Put stator to the working station table4. Adjust the tooling according to different model stator5. Set the stator diameter in the touch screen then select the pre-set data.6. Press "start" button.7. Machine will automatically do winding.8. Take out the stator Application: This needle winder is suitable for winding BLDC stator. Competitive advantages Variety of application, easy operation. We have Overseas Service Center.The operation and tooling change process is easy.

Stator Coil Pre-forming Machine is driven by hydraulic system; PLC programming; tooling expansion slice makes the first coil and inter-phase insulation paper in slot adjacent, leaving enough space for second insertion and ensure the quality of successive coil insertion; apply to multi-layer stator winding insertion. Technical parameter: Stator I.D 30~100mm Max stator O.D 160mm Thickness of stator lamination 15~100mm Displacement of oil pump 20F Power supply 380V5060Hz Machine productivity around 1500pcs8 hours Weight 800KG Dimension 1200mm×700mm×2200mm         Machine main function and characteristic This machine adopts whole hydraulic system and PCL program. This machine can adjust the forming stack length by changing washer. Form the OD, and ID of the stator core coil without forming hang over to facilitate operator to put phase isolator. After forming, there is no copper wire enamel broken or wire snape Changing a new tooling is easy and convenient. Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken. Production capacity ≤15sset (exclude loadingunloading time) Primary qualification rate ≥99%, after rework, the rate ≥99.9% This machine adopts safety grating protection system. Operator need to stand when operating. Machine adopts two hands simultaneously start button to ensure safety.

Auto automatic armature rotor aluminum die casting  mold machine   (1)    Main technical data of the armature rotor aluminum die-casting mahcine Max. mold closing stroke:150mm Pressing injection stroke: 50mm Hydraulic system working pressure: 10~25MPa Hydraulic motor power: 7.5kw Oil tank capacity: 350L Rotor stack length: ≤100mm Rotor OD: ≤100mm Pitch time ≤18~24s Change-over time: 20mins Upper Presser operation pressure: 40T Bottom presser operation pressure: 15T Working pressure of oil cylinder: ≤21Mpa Power: 380V  5060Hz  3.75KW Machine weight: 2500kg Machine Deminsion: 970mm(L)*920mm(W)*2300mm(H)   (2) Machine main function and characteristic of the armature rotor aluminum die-casting mahcine Automatic get aluminiummelt liquid, automatic loading and unloading the rotor. Rotor loading: automatic pneumatic circularly pick up. Get aluminium melting liquid: servo motor control the mechanical arm, control the liquid volume through human-machine interface. Automatic cut the waste material, automatic recycle the cut wasted material and convey it to the furnace by the conveyor. Automatic feed mold releasing agent, the feeding time and times can be set. There is water cooling channel, helpful for reducing the mold temperature effectively. Setting on touch screen: forward and backward speed, stroke, swing angle of the mechanical arm, loading speed, etc. Machine will alarm and stop working

(1) Machine function and character: auto Servo paper inserting machine is a special design specific to different design or different sizes of slot; can finish insulation paper insertion at a timematic adjustment to perimeter, automatic cutting paper, automatic hemming and automatic inserting when inserting to various or different-sized slot; use servo paper inserting machine to feed paper and settle breadth; interpersonal interface sets required specific parameter; forming mode is adjustable to different sizes of slot automatically; characterized by simple operation, low noise, fast speed and high automaticity. (2) Main technical data: Stator I.D 70~140mm Stator O.D ≤200mm Stator stack length ≤160mm Width of edge folded 3~7mm Feeding length ≥15mm Paper thickness ≤0.35mm Power supply 380V5060Hz 0.75KW Air pressure ≥0.6MPa Weight 280Kg Dimension 1150*1000*1600mm Working station single After sales service Overseas Service Center Available (3)Applications:  This insulation paper inserting machine is used for induction motor stator. (4)Operation step Power on the machine Put stator and insulation paper to the working station table Adjust the tooling according to different model stator Set the stator diameter in the touch screen then select the pre-set data. Press "start" button. Machine will automatically do paper inserting. Take out the stator (5) Information needed for paper insertion machine inquiry It will be better if customer could send us detailed drawing

The stator paper inslotinserter is designed for wheel motor stator slot paper insertion. Itadopts servo working system which dramatically improve the paper insertingefficiency. The parameter of stator slots number, feeding speed, indexing speedand indexing direction can be set in the touch screen. (1) Technical parameter of stator paperinslot inserter:Stator OD:80~200mmStack length range:18~35mmInsulation paper thickness:0.188~0.35mmPower supply:220V 5060HZ  1.0KWWeight: 350KGDimension: 500x550x1500 working station: single Control method: PLC Data setting: by touch screen:  After sales service: Overseas ServiceCenter Available   (2) Application of stator paper inslotinserter :It is suitable for wheel motor coil to do paper inserting.  (4) Competitive advantages Variety of application, easy operation. We directly supply our machines to manycountries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexicoetc. We could customize machine for our customeras per their requirement. We have Overseas Service Center.    (5) Information needed for paper inslotinserter inquiry It will be better if customer could send usdetailed drawing including below information.1. Stator lamination drawing2. Stator stack drawing3. insulation paper drawing and its material4. Stator application5. Required productivity6. Other technical requirementIf possible.

Inner stator insulation paper inserting machine This design of this series Inner stator insulation paper inserting machine is based on a consideration of easy operation. Normally, operator only needs to load the stator to the working position. Then machine will automatically do the paper inserting after start button is pressed. This machine is suitable for series motor, BLDC motor and stepping motor stator. All the parameter can be set in the touch screen, such as paper length, paper feeding speed, slot number, stator dimension.  (1) Technical parameter of Inner stator insulation paper inserting machine : Stator OD: ≤135mm Stack Height:10-100mm Material's Thickness:≤0.35mm Pitch time:≤1sslot Air Pressure:0.4-0.6MPa Power supply:220V   5060Hz 3Kw Weight:≈400Kg Dimension:(L)1500×(W)650×(H)1480mm Control method: PLC (2) Application of Inner stator insulation paper inserting machine : It is suitable for series motor, BLDC motor and stepping motor stator.  (3) Machine function and characteristic: This Inner stator insulation paper inserting machine adopts mechanical driven system, servo system and pneumatic system. As a result, the machine can automatically do positioning, pressing, paper feeding, paper forming, paper pushing. The paper edge can be auto chamfered so as to solve the winding problem caused by paper, and improve the percent of pass of stator. This machine is easy to operate, of high automation.

Paper feeding is driven by stepping motor, edge folding, feeding length, width is adjustable, and fixed output can be set; suitable for manual motor manufacturer and manufacturer who has varies motor models(Heating function can be customized). Application: This stator insulation paper forming and cutting machine is suitable for manual motor manufacturer and manufacurer who has varies of motor models. Technical parameter: Feeding length 10~100mm Cutting width ≤2000mm Width of edge folded (cuffing) 2.5~4mm Cutting length ≤150mm Cutting thickness ≤0.35mm Power supply 220V5060Hz 0.5Kw Weight 180Kg Dimension 850*1100*1200mm     Competitive advantages Variety of application, easy operation. We have Overseas Service Center. It is suitable for rotor or stator with different modelnumber and dimension. The operation and tooling change process iseasy. We could customize machine for our customeras per their requirement. We directly supply our machines to manycountries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexicoetc.This machine is controlled by PLC. All the parameter could be seton the touch screen, Stator Insulation Paper Forming and Cutting Machine picture Information needed for stator production lineinquiry It will be better if customer could send us detailed drawing including belowinformation. 1. Wedge andinsulation paper drawing and its material 2. Other technicalrequirement If possible, it will be better if customer can send us samples.

Stator Insulation Paper Inserting Machine is suitable for small and medium-sized three phase motor, gasoline generator, etc. Inserting insulation paper automatically from bottom of stator slot;automatic paper feeding, edge folding and forming; characterized by low noise, fast speed, excellent forming, etc.; slot number change is controlled by electric;interval slot inserting and skip slot inserting could be at option; it is conveient and easy for different slot number stator production and changing tooling. Operation is simple, load empty stator manually, press start button, then it will index and insert paper automatically, then unload finished stator manually, this is the process of finishing one cycle. I. Technical Data: Stator I.D 20~90mm Max stator O.D 135mm Stator stack length 20mm~90mm Height of edge folded(cuff) 2~4mm Max insulation paper thickness 0.35mm Feeding length 12~45mm Tack time 0.5Sslot Power 750W Input 380V5060HZ Machine productivity around 1500pcs8hours Dimension 1100mm × 650mm × 1000mm Weight ≈ 400kg   II. Main Components PLC: Mitsubishi Indexing Motor: Sihai Sensor: Autonics Buttonswitch: Schneider Other electric elements: DelixiSchneider   III. Machine main function and characteristic: l. The cutting edge of insulation paper should be neat, no damage, and free of burr. The stator should not be deformation and stator lamination should not be upward resulting from paper inserting. 2. The whole set of tooling can be changed

This stator winding line is used to winding stator coil and insert stator coils. The winding line is consisted three stand-alone machines respectively. Each winding machine will finish the action automatically and independently.  During operating, user should load stator core, wire, and wedge into the related working position. Then press start button. Machine will automatically wind the wire into coils in the winding station. All the coils will be wound into tooling orderly. Then the turntable will rotate to the coil inserting station. Machine will automatically cut, form and insert wedge together with the coil inserting process. After all the process, user can unload the stators.  Technical data:  Stator OD ≤φ150mm Stator ID  ≤φ110mm Stack Height 30-120mm Height of Coil 3 Appropriate Wire φ0.18-φ1.2mm Winding inserting mode chained   same core Pitch time ≤40spc Air Pressure 0.6-380V   5060Hz 15Kw Weight  ≈4000Kg Dimension (L)2000×(W)1300×(H)2300mm ApplicationThe stator winding machine  is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor and other motors. Information needed for stator winding line inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator lamination drawing2. Stator stack drawing3. Wire connection drawing 4. Stator application5 Required productivity6 Other technical requirement.

NIDE horizontal type stator coil forming machine Suitable for Germany with  touch screen (1)Application The stator coil final forming machine  is applied to deep water pump motor and other various type of overlength motor stator. And it is working after the stator coil lacing machine. The coil forming machine is suitable for germany.    (2)Main technical data Stator   OD ≤350mm Stator   ID 80-230mm Stack   Height 100mm-400mm Displacement of Cylinder 30Lmin Power supply 380V   5060Hz Weight  ≈1800Kg Dimension (L)2550*(W)1930*(H)2200mm (3)  Machine mainfunction and characteristic This stator coil  forming machine is horizontal type so as to easily load and unload stator. The final forming machine is driven by hydraulic system, and controlled by PLC. It expands the inner of the over-hang during forming process; it effectively ensures the over-hang dimension and the appearance. During tooling change, just change the block, inner expansion core and upper stator fixing sleeve. The core adopts quick release structure. For the block and upper stator fixing sleeve, it can be quickly changed by loosening the related screws. When change different stack stator, loosen related screws, then drive the gear and rack by handle. After adjustment, tighten the screws.

NIDE Full-automatic small stator final forming machine  (1) Application of stator final forming machine The Full-automatic small stator coil final forming mahcine is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor. (2) Technical data of stator final forming machine Stator ID: 30~110mm Stator OD: Max. 160mm Stack length: 20~150mm Winding overhang range: 15--50mm Displacement of cylinder: 20Lmin Power: 380V5060HZ   1.5KW Machine weight: about 600kg Machine dimension: L850*W1000*H2300mm   (3)  Machine main function and characteristic of stator final forming machine This stator final forming machine adopts whole hydraulic system and PCL program. This machine can adjust the forming stack length by changing washer. Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken. Production capacity ≤13sset (exclude loadingunloading time) Primary qualification rate ≥99.5%, after rework, the rate ≥99.9% This coil  former machine adopts safety grating protection system. Operator need to stand when operating. Machine adopts two hands simultaneously start button to ensure safety.   Full-automatic forming machinery, forming machinery, coil forming machine uk, coil forming machine used, Stator forming machine, Fully automatic stator forming machine

Full aotumatic coil winding mahcine stator production line for three phase washing machine The Three Phase Washing Machine Motor Automatic Stator production Line with Automatic Coil Winding and Inserting Machine has Six working stations, three winding heads and one coil inserting station. This new full automatical stator production line adops app remote control and is consisted of several machines, such as stator paper inserting machine, stator coil winding and coil inserting machine, stator coil lacing machine, stator coil forming machine.Operator needed for this stator production line is far less than other machines or lines.And The reduction of labor force will not affect the productivity. With a lower labor cost, and high productivity, this stator product line improves the competitiveness for motor manufacturers. Technical Specification:  Flyer swing diameter 240mm Stack length ≤90mm Stator OD ≤150mm Winding speed ≤2200RPM Number of jumps 2-4 sections Wire diameter 0.18-1.2mm Parallel winding wire number ≤2 Air pressure 0.5 ~ 0.6MPa Power 14Kw Weight 4000KG Environmental temperature -10~60℃ Machine dimension  (L) 2700* (W) 2300* (H) 2200 (including wire barrel) Machine features: This stator production line is equipped with automatic stator coil winding and inserting machine. This line is used for washing machine motor stator winding, table fan motor stator winding, etc.

Double Station BLDC stator slot Paper Inserting Machine FOR Wheel Motor  stator  (1) Technical parameter: Stator diameter  150~200mm Stator height 18~35mm Paper thickness 0.188~0.25mm Power supply 220V 5060Hz 1.0Kw Weight 550Kg Dimension 1550*550*1500mm  (2) Application:The stator insulation paper inserting machine is suitable for wheel  motor stator. (3) Machine function and characteristic:This machine is designed for wheel stator slot paper insertion. Double servo working system is adopted to improve the paper insertion efficiency dramatically. Parameter of stator slot number. feeding speed, indexing speed and indexing direction can be set in the HMI.Infinitely variable speeds are applicated to working frequency.During running, machine has no obvious vibration or noise. After paper inserting, there should be no warp or deformation of stator lamination.  (4)Information needed for paper insertion machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator lamination drawing2. Stator stack drawing3. insulation paper drawing and its material4. Stator application5. Required productivity6. Other technical requirementIf possible, it will be better if customer can send us samples. Besides machines, we also supply various kinds of insulation materials, like insulation paper, wedge,  DMD Class BF, DM Class BF, Polyester film Class E

Our electric motor automatic production line can be produced in two different process according to client's requirements.the whole production is of high automation.  process 1: shaft press---end field press---commutator press----armature insulation paper inserting---armature winding-commutator welding----wedge inserting---armature testing.the electric motor production line including: shaft pressing machine, end plate pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutatorhot stacking machine, armature wedge inserting machine and armature testing machine. Process 2: armature insulation paper inserting---armature winding-commutator welding----wedge inserting-- armature testing.there are three kinds of production line according to different conveyor: s1, s2 and s3.s1: support the armature on the armature shaft, this way maybe damage the shaft.s2: support the armature on the lamination, it can protect the shaft and has low noise.s3: put the armature on a conveyor plate, it can protect the shaft, lower noise and has nice appearance. Information needed for armature production line inquiryit will be better if customer could send us detailed drawing including below information.1. Rotor lamination drawing 2. Rotor assemble drawing 3. Rotor stack drawing 4. Rotor winding diagram drawing: with rotor wire diameter and turn number 5. Commutator drawing 6. Shaft drawing 7.end cover drawing

This high effiecency rotor winding machine rotor manufacturing assembly line is including several machines, like insulation paper insertor,   armature winding machine,  commutator fusing machine, wedge insertion machine, and rotor testing machine. The rotor will be carried by mechanical arm and converyor to the next machine.  insluation paper insertorthis machine is used to inserting paper into rotor slot. The insulation material can be as per customer's requirement, dmd, dm,  polyester film are all can be used in this machine.  armature winding machineafter doing paper inserting machine, mechanical arm and converyor will  carry the rotor the rotor winding machine position. The machine is equipped with touch screen and plc, winding parameter could be set and modified on the screen.  commutator fusing machineit can weld both riser and hook type commutators. This machine is applied to dc motor and universal motor. It is controlled by pcl, all the data setting can be done on the touch sreeen. There are four power control method, namely secondary constant current, secondary constant voltage secondary constant frequency.  wedge insertion machinethe wedge material can be as per customer's requirement, dmd, dm,  polyester film are all can be used in this machine.  rotor testing machineit is suitable for testing less than 72 segments armature.

We supply different types of armature assembly line as well as customized service. These production lines are suitable for power tooling motor armature production, especially with a great production valume. This automation rotor manufacturing assembly line is consisted of below machines,  insulation paper inserting machine, rotor winding machine,  commutator welding machine, wedge inserting machine, and rotor testing machine. The rotor will be carried by mechanical arm and converyor to the next machine. Process:insulation paper inserting --rotor winding ---commutator  fusing---wedge inserting-commutator turning-----armautre balancing-----armature testing. Insulation paper insertion machine This machine is used to inserting paper into rotor slot. The insulation material can be as per customer's requirement, DMD, DM,  polyester film are all can be used in this machine. Rotor winding machineAfter doing paper inserting machine, mechanical arm and converyor will  carry the rotor the rotor winding machine position. The machine is equipped with touch screen and PLC, winding parameter could be set and modified on the screen.  Commutator welding machineIt can weld both riser and hook type commutators. This machine is applied to DC motor and universal motor. It is controlled by PCL, all the data setting can be done on the touch sreeen. There are four power control method, namely secondary constant current, secondary constant voltage.

Nide is specialized in the motor production machine. We supply a full range of armature production machines, which is of high automation. All the process will be done by machine. Operator only needs to do loading and unloading. This rotor manufacturing assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting,   Process:Shaft press---end cover press---commutator press----armature insulation paper inserting---armature winding-commutator welding----wedge inserting- armature testing---ball bearing inserting,   Shaft pressing machine Shaft Pressing machine is used to insert shaft into lamination. User only need to load lamination and shaft. Then machine will do inserting automatically. End cover machine After shaft inserted, assembly line will transfer the rotor to next station. And it will do end cover inserting.   It adopts vibration boult feeding method.   Commutator Pressing machine This machine is used for pressing commutator onto the shaft. Machine can automatic feeding commutator and armature core. This machine can also be connected to a production line to achieve mass production requirement.    Insluation paper inserting machine This machine is used to inserting paper.

Nide could customize rotor production line as per different customer's requirement. It has a wide application, suitable for high production requirement. This rotor assembly line consistes of  armature winding and fusing machine, armature wedge inserting machine, commutator turning machine, rotor balancing machine and armature testing machine. Process:insulation paper inserting --rotor winding ---commutator  fusing---wedge inserting-commutator turning-----armautre balancing-----armature testing. This automation rotor manufacturing assembly line is consisted of below machines,  insulation paper inserting machine,  rotor winding machine,  commutator welding machine, wedge inserting machine, and rotor testing machine. The rotor will be carried by mechanical arm and converyor to the next machine.  Insluation paper inserting machineThis machine is used to inserting paper into rotor slot. The insulation material can be as per customer's requirement, DMD, DM,  polyester film are all can be used in this machine.  Rotor winding machineAfter doing paper inserting machine, mechanical arm and converyor will  carry the rotor the rotor winding machine position. The machine is equipped with touch screen and PLC, winding parameter could be set and modified on the screen.  Commutator welding machineIt can weld both riser and hook type commutators. This machine is applied to DC motor and universal motor.

This rotor automatic production machine assembly line can be produced in two different process according to client's requirements. Process 1: Armature insulation paper inserting---armature winding-commutator welding----wedge inserting-- armature testing.There are three kinds of production line according to different conveyor: S1, S2 and S3.S1: Support the armature on the armature shaft, this way maybe damage the shaft.S2: Support the armature on the lamination, it can protect the shaft and has low noise.S3: Put the armature on a conveyor plate, it can protect the shaft, lower noise and has nice appearance.  Process 2:Shaft press---end field press---commutator press----armature insulation paper inserting---armature winding-commutator welding----wedge inserting- armature testing.This electric motor production line including: shaft pressing machine, end plate pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine. Suitable for different type of armature production Competitive advantagesVariety of application, easy operation.We have Overseas Service Center.Machine is controlled by PLC. All the parameter can be set in the touch screen.It is suitable for stators with different model number and dimension.The operation and tooling change process is easy.We could customize machine for our customer as per their requirement

Fully automatic stator winding machine can automatically do winding, indexing and wire cutting process. After munally loading the stator, press the start button. The coil winding Machine will finish the winding process automatically.  Because of its high efficiency, stable performance and reasonable price, this machine can help you reduce cost while remain high quality. Main technical data: Stator O.D 50~130mm Wire diameter 0.15~1.3mm Stator stack length 10~70mm Turn number 0~99999 Slot number 2 poles Air pressure 5~7Kgcm2 Total power 2KW Voltage AC380V, 5060Hz Weight 1200Kgs Dimension 1500*2100*1650mm Competitive advantages Variety of application, easy operation.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.We could customize machine for our customer as per their requirement. We have Overseas Service Center.  Information needed for Automatic Stator Winding Machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementIf possible, it will be better if customer can send us samples.

This Stator coil lacing machinery is suitable for stator coils do lacing. It is appropriate for micro induction motor like conditioner motor, washer motor, compressor motor, fan motor, alternator motor, pump motor etc.Machine structureThis coil lacing machine is consist of machine body, needle, nozzle rotating part, needle fore and back movement, nozzle swing part, needle up and down movement part, stator indexing part, thread feeding, thread cutting part. Lacing machine technical data Min. stator ID 33mm Max. stator OD 150mm Over-hang height 15~48mm Stator stack length 15~120mm Pitch time About 0.5~0.7secslot Power supply 380V5060Hz Air pressure 0.5~0.8MPa Power 3KW Dimension 1570 x 670 x 1680mm Weight About 900kg Competitive advantagesVariety of application, easy operation.We have Overseas Service Center.Machine is controlled by PLC. All the parameter can be set in the touch screen.It is suitable for stators with different model number and dimension.The operation and tooling change process is easy.We could customize machine for our customer as per their requirement.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.This machine is controlled by PLC. All the parameter could be set on the touch screen. Lacing machine operation method1.   Connect machine to power source and air source. Do threading. 2.   Put the stator in the tooling.3.   Switch to "auto" mode.

This Single station stepper motor needle winder equipment covers a  full  range of application, such as stepper motor stator with 6 slots, 9 slots and 12 slots stator and BLDC motor stator. Winding, indexing and wire cutting process are under control of the PLC, which are done automatically by machine,  This needle winder machine is easy to operate except manually loading and unloading stator. The touch screen will display the windng data, alarm information and other data. The coil winding parameter can be set as per customer's requirement.  Techanical parameter Voltage AC220V, 5060Hz Total power 2KW Stator O.D 15~65mm Wire diameter 0.1~0.7mm Stator stack length 7~100mm Turn number 0~99999 Slot number 6 poles, 9 poles, 12 poles Productivity 3~4minpc Air pressure 5~7kgcm2 Weight 450Kgs Dimension 1600*1100*1400mm       Application: This needle winder is used for winding BLDC motor stator or stepper motor stator with 6 slots, 9 slots and 12 slots stator.    Competitive advantages: Easy operation, high automation. PLC and touch screen control Information needed for Needle Winder inquiry It will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementIf possible, it will be better if customer can send us samples.

Large size motor stator paper insulation  inserter 1.Application of the stator paper insulation inserting machine This horizontal type of stator insulation paper inserter is especially for large and medium-sized motor stators. It is suitable exclusively for large and medium-size motors, especially suitable for generator, deep pump motor, three phase machine, etc. 2.Machine main function and characteristic of the stator paper insulation inserting machine Inserting insulation paper automatically from bottom of stator slot Automatic paper feeding, edge folding and forming slot number change is controlled by electric; interval slot inserting and skip slot inserting could be at option; it is convenient and easy for different slot number stator production and changing tooling. 3.Main Technical Parameter of the stator paper insulation inserting machine Stator ID:φ70-φ250 Stator height:80-300mm Stator OD: ≤300mm Height of edge folded:2-4mm4-7mm insulation paper's thickness: 0.188~0.35mm Tack time: 1.2 Sslot Power: 380V 5060HZ   1.5KW Dimension: 1600*1420*1600mm Weight: 450KG 4.Information needed for paper insertion machine inquiry It will be better if customer could send us detailed drawing including below information. 1. Stator lamination drawing 2. Stator stack drawing 3. insulation paper drawing and its material 4. Stator application 5. Required productivity 6. Other technical requirement If possible, it will be better if customer can send us.

Stator automatic overhang lacing machine This stator lacing machine is especially applied to multi sizes, low output or more lead stator coil winding lacing. This lacing machine is suitable for stator used in induction motor industry, such as pump motor, fan motor, and washing machine motor.  Machine specification:  Stator ID φ30-φ90 Statro OD less than 135mm Stator lamination height 10-100mm Max winding height 40MM Lacing speed 0.6Sslot Lacing mode slot by lsotinterval slotfancy lacing Power 3800V 50-60HZ Air pressure  >0.4mpa Weight 400KG Dimension 1000x600x1260 Machine features:  This lacing machine is controlled by PLC, different stator slot configurations can be set in the touch screen, like  the lacing type, like slot by slot lacing,  interval lacing, and fancy lacing. During machine operation, operator only need to load and unload the stators.  It is consist of machine body, needle, nozzle rotating part, needle fore and back movement, nozzle swing part, needle up and down movement part, stator indexing part, thread feeding, thread cutting part. It has a mechanical cam operated drive system to keep a perfect phasing of the needle movement during the lacing cycle. Information needed for stator lacing machine inquiry It will be better if customer could send us detailed drawing including below information. 1. Stator lamination drawing 2. Stator stack drawing 3. Stator winding drawing 4.Winding drawing

Nide upgraded model three stations stator winding machine with 2 poles 1.   main function and feature the stator coil winding machine hasthree winding working stations there 6pcs stator stations: left and right moving to loadunload, when three winding stations do winding,  the other three stations is ready for loadingunloading the coil winding mahcine automatic feed, press stator tight, assemble fixture, wind, clamp and cut wire protective cover: adapts robust aluminium alloy section wire end length can be adjustable, it can have tapping function if required  casted frame, stable accuracy, good vibration absoption.  2.main technical parameter machine size:1600x1700x1830(lxwxh)(exclude wire holder)                        2400x1700x1830 (lxwxh)(include wire holder) stator od:50~90mm(can be customized) stack length:20~60mm(can be customized) stator id:30~50mm(can be customized) rated efficiency:if wind  0.32mm300turns, 52~55sec3pcs travelling distance:135-190mm adjustable(standard model)                                  150-220mm(lengthen model) speed:0-550rpm adjustable wire diameter:copper wire 0.25- 0.9mm(can be customized) pole:2poles motor power:4kw voltage:three phase 380v air pressure:0.4~0.7mpa machine weight:about 1.5t one people operate one machine.

This automatic hook type armature winding machine is suitable for winding medium and big wire diameter armature, especially for hook type commutator armature . The winding process such as automatic feeding, winding, indexing and wire cutting, can be done by this armature winding machine automatically. Operator only needs to do load and unload armature from material loader. Equipped with touch screen and plc, winding parameter could be set and modified on the screen. We could also produce machine  as per customer's requirement.  we also have armature winding machine equipped with conveyor, operator only need to put several pieces of armature on the conveyor at one time, then machine will finish all the armatures automatically.    technical parameter: item specification wire diameter magnetic hysteresis method:0.16~0.55mm electric control method:0.30~0.85mm armature o.d range 20~60mm stack length 20~60mm shaft diameter 3~17mm shaft length less than 300mm armature slot even slot turn number 0~9999 commutator diameter 12~40mm winding speed 0~3000 rpm winding motor power 1.5kw * 2 angle detecting speed 0~3000 rpm angle detecting motor power 0.75kw *1 air supply pressure 4~6 kgcm2 the machine total power 4.0 kw voltage three phase ac380v5060hz weight 1200kg dimension 2000(length)x1300(width)x1800(height)mm   production efficiency of this machine around 1000pcs8 hours, it is only a rough idea, depends on the armature slots number.

This Vertical type automatic stator coil winder is equipped with single-head and two working stations. The coil winding Machine is of great high automation. All the winding parameter of this winding machine could be set in the touch screen. This coil winder could achieve below process automatically,   winding process, indexing process, cutting process. Machine could automatically wind the coil into a transfer former orderly so as easy to do winding inserting process. This coil winding machine is suitable for high slot filling rate, small notch stator. The winding tension is adjustable.  I. Technical data Wire diameter range 0.17-1.2mm Max winding speed 3000rpm Circle 0.1 Power 380V- 5060HZ Weight 1100kg Air pressure 0.5mpa Dimension 1800 X1100 X2200mm II.  Main components Servo motor: Mitsubishi Control system: Yitu Taiwan Touchscreen: Tongtai Sensor: Autonics Switch and Button: Schneider Other electric parts: Delixi Schneider   III.  Machine main function and characteristic l. Winding tooling: each machine has one set winding tooling and three vertical winding forms. 2. The whole set of tooling can be changed, and it takes about 15min. 3. The turntable is two stations structure. It adopts servo system to rotate and index transfer form. 4. Allow three wires winding simultaneously. 5. Main spindle is controlled by servo motor. The coil turn number accuracy is ±1 turn. 6. The working rotation speed can be set.

This armature winding machine has three winding modes: single slot-single hook, single slot-double hook and double layer winding. It could do twice winding in one slot, four times winding in the two adjacent slots. It has automatic treatment for wire broken, 2 settable sequences is: winding before broken, or broken before winding. Production parameter for 100nos armatures could be stored Display parameter, including shift output, total output, consuming time, etc. Automatic alarm if any abnormal condition occurs Single action, automatic and stepping operation could be switched Steady fixture, up and bottom protective tooling and protective wire hooking device Loading mode: cylinder feeding armature automatically, get out finished armatures manualTechnical Parameter: Item Specification Wire diameter Magnetic hysteresis method:0.16~0.55 mm Electric control method:0.30~0.85 mm Armature O.D range 20~60mm Stack diameter 3~17mm Shaft length 20~60mm Shaft length Less than 300mm Armature slot Even slot Turn number 0~9999 Commutator diameter 8~40mm Winding speed 0~3000 rpm Winding motor power 1.5KW * 2 Angle detecting speed 0~3000 rpm Angle detecting motor power 0.75KW *1 Air supply pressure 4~6 Kgcm2 The machine total power 4000 W Voltage Three phase AC380V 5060Hz Weight 1200Kg Dimension 2000(L)X1300(W)X1800(H)mm Main Configuration:Indexing servo motor: 750WX1 spindle: Omron Winding servo motor 1500WX2 spindle: Omron PLC: Omron Interface module: Omron Extension module: Omron

This rotor coil winding machine is equipped with conveyor which greatly improve the machine working effiency and saves the labor cost. Once start button is pressed, machine will automatically do rotor coil winding. With a touch screen, all the winding data can be displayed and edited. Machine specificationWire diameter range: 0.16~1.2 mmArmature diameter: 20~85 mmStack length: 10~70 mmShaft diameter: 3~15 mmShaft length: Less than 250mmArmature Slot: Even slotTurn number: 0~9999Commutator diameter: 8~40 mmWinding speed: 0~2500 rpmWinding motor power: 1.5KWX2Angle detecting speed: 0~3000 rpmAngle detecting motor power: 0.75KWX1Air supply pressure: 4~6 Kgcm2The machine total power: 4.0 KWVoltage: Three phase AC 380V 5060 HzWeight: 1250 KgDimension: 2000X1000X1800mm Feature Rotor armature winding machine involved 1 piece S22000 standard conveyor with 25 stations, Operator could loading 12 pieces and unloading 12 pieces at one time, CS rotary arm: Servo motor for go and backClamp fixture take and positioning armatureHigh efficiency Working principle 1. This winding machine adapts double flyers structure, 1set 1KW servo motor drive the two flyers rotation, and 400W indexing servo motor. During working, the armature is clamped tightly by two nos winding tooling and clamping device. When flyers are running, wire goes through the wire holder, tension device then enters hollow spindle, comes out from wire sliding wheel, then the wire slides into the armature slot through flyer wire

This type of armature winding machine is designed for even slot type motor armatures, withr hook or riser type commutator. It is widely applied in manyfield like motorcycle motor, automobile motor, power tool motor, house appliances series excited motor, and various kinds of PMDC micro motor. It's an economic, fast and reliable specialized winding machine.    Working principle 1. This winding machine adapts double flyers structure, 1set 1KW servo motor drive the two flyers rotation, and 400W indexing servo motor. During working, the armature is clamped tightly by two nos winding tooling and clamping device. When flyers are running, wire goes through the wire holder, tension device then enters hollow spindle, comes out from wire sliding wheel, then the wire slides into the armature slot through flyer wire guiding wheel. After this step, put armature into the slot to do winding.   2. This machine adapts servo system to do winding. Meanwhile, machine action is controlled by true color human-machine PLC controller; armature indexing is controlled by big power stepping motor; servo speed is controlled by double flyers rotation speed. Moreover, this machine has other functions, such as slow increasing speed when starting, Max. speed limit, brake time, CW &CCW rotation, counting pre-set, etc. With complete function and reliable running, this machine is convenient for operation.   3.  The machine fixture is controlled by pneumatic cylinder, high performance

Nide's LAW-2 series automatic armature wire making machine adopts international advanced technology. The AC servo controls the winding and indexing movement. Meanwhile, this series of armature coil winding machine uses touch screen to display and edit the parameter, improving the efficiency largely. It is suitable for small wire diamter winding. It is a good choice for motor manufacturer. Techinical parameter: Item Specification Wire diameter 0.08~0.30mm (Mechanical type) 0.16~0.55mm (Hysteresis) Winding slots Oddeven number Commutator diameter 8~40mm Armature diameter 20~60mm Armature stack length 10~60mm Winding motor speed 0~3000 rpm Control system Mitsubishi PLC control Air supply pressure 5~7 Kgcm2 Voltage   AC220V 5060Hz Weight 500Kg Dimension 1800(length)X800(width)X1500(height)mm Information needed for Armature Winding Machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Rotor lamination drawing 2. Rotor assemble drawing 3. Rotor stack drawing 4. Rotor winding diagram drawing: with rotor wire diameter and turn number 5. Commutator drawing 6. Required productivity 7. Other technical requirement If possible, it will be better if customer can send us samples.

This kind of Four Station Armature Winding Machine is designed for  small size rotor with 3~5 slots. Equipped with 4 working stations,   as a result, 4 armatures could be wound simutaniously.This machine is controlled by PLC. All the parameter could be set on the touch screen, like wire diameter, turn number, armature slot number, winding speed etc.  Technical parameter: Item Specification Wire diameter 0.08~0.55mm Armature type 3~5 slots armature Armature diameter 8~25mm Max armature stack length 30mm Winding motor speed 0~3000 rpm Maxshaft length 70mm Rated power ≤1.2KW Air supply pressure 0.4MPa≤ working air pressure≤0.8MPa Voltage AC220V 5060Hz Working environment temperature 0℃~45℃ Working environment humidity 10%~60%(no condensation) Machine dimension 1100*1100*1300mm Package dimension 1200*1200*1500mm Machine weight 320Kg Package weight 430Kg                    Main spare parts: 1. One set of tools2. Four pcs wire bobbin(in which the copper wire is put)Main configuration:1. One set PLC + touch screen2. One set servo driver3. Two sets stepping motor driver4. Two sets Tanwan Mingwei switching power supply5. One set NSK screw rod Competitive advantages Variety of application, easy operation.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.We could customize machine for our customer.

Due to two working station, this Automatic stator winding machine can  wind two stators at the same time. Fixtures are in cycle operation automatically. It is No need to assemble fixture on the stator.It is benefit for the on-line operation.And the stator winding machine is used for  different types of stators.(1) Function: 1. Cast iron or steel frame can absorb the shock. Accuracy is stable. The maximum winding speed is up to 450RPM (according to the wire diameter). 2. All the actions are fully automatic (including loading and unloading). The winding could be more stable and efficient. 3. The cutting part structure is in compact.Wire clamping and cutting is finished at the same time. 4. Easily to change the fixture for different types of stators. 5. Fixtures are in cycle operation automatically.It is benefit for the on-line operation. 6. Permanent magnet tensioning device enables the tension adjustment. 7. Travel and swing angle is adjusted within 150-220mm (mechanical adjustment).It could adapt to different requirement of different stator models. 8. Two working stations. (2) Parameter: Stator O.D 50~90mm Wire diameter 0.25~0.8mm Stator stack length 20~45mmm(standard);30~60mm(lengthen) Stator I.D 30~50mm Slot number 2 poles Air pressure 0.4~0.7MPa Lubrication mode Continuous lubrication oiling machine Voltage AC380V, 5060Hz Weight 1800Kgs Dimension 2100*1250*1830mm (3)Information needed for Automatic Stator Coil Winding Machine inquiryIt will be better

This machine is with single-tooth wedge protective function and two sides'mechanical loading and unlaoding function. It can transfer the stator to the automatic stator prodcution line. The working efficacy is very high with three working station. This stator winding inserting machine is designed with movable winding inserting tooling and three working station. Oneworking station is used to equip with mechanical arm to transfer the coil to the station. The second one is used to cut and form wedge. The third is used to do coil and wdge inserting. This system has proved that it can also be utilised for customers with a high level of production.The system is operated by a heavy duty pneumatic cylinder with a controlled smooth movement of operation for the coil inserting sequence.It is very compact and can easily be sited on a work bench therefore not taking up valuable floor space. Application:It is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor. Main technical data Working station 3 Control method touch screen Stator stack length 30~120mm Stator OD ≤150mm Stator ID 50~120mm Wire diameter 0.18~1.2mm Air source 0.6~0.8Mpa Voltage 380V 5060HZ Power 11KW Weight 3500KG Deminsion 2550mm(L)X 2230mm(W)X2300mm(H) Competitive advantages Variety of application, easy operation. We have Overseas ServiceCenter. It is suitable for rotor or stator with different modelnumber and dimension. The operation and tooling

Machine main function and characteristicWith horizontal frame design, controlled by industrial programmable PLC. It is used for winding and wedge automatically inserting. It adopts AC servo motor driving system, AC frequency conversion speed regulation system, pneumatic system. It can achieve wedge length setting, feeding, cutting, forming and inserting into stator together with coil automatically. Coil inserting speed can be set at different section. Wedge feeding mode can be set according to different motor. Euipped with human-machine control interface, it has the function of status display, malfunction alarm, various parameters setting etc. It has the characteristic of widely application, high automation, easy operation and convenient tooling change. Description: This coil insertion machine adopts AC servo motor driving system, AC frequency conversion speed regualtion system, pneumatic system. It is used for coils and wedge automatical inserting process. Machine can achieve wedge length setting, feeding, cutting, forming and inserting into stator together with coil automatically.  The system is operated by a heavy duty pneumatic cylinder with a controlled smooth movement of operation for the coil inserting sequence.It is very compact and can easily be sited on a work bench therefore not taking up valuable floor space.Loading of coils is quick and simple.The coil inserter takes the headache out of manual coil insertion.

With servo driven system, the machine is used for inserting coil and wedge into stator slot simultaneously. the wedge feeding is to be done by stepping motor. different parameter could be set in human-machine interface; the speed and feeding mode is acqurable according to different slot filling rateand different kind of wire. the machine mainly apply to air conditioner motor, washing machine motor, compression motor, fan motor, generator motor, pump motor, single and three phase induction motor, etc. Technical parameter: Main technicaldata Stator stack length:  10--150mm Stator OD: Max. 160mm Stator ID: 30~110mm Tooling traveling distance: Max.60mm Suitable wire material: copper aluminium wire Slot number: 8~48slots Max. slot filling rate: 80% Power: 380V5060HZ 3Kw Machine weight: about 850kg Machine dimension: L1850*W650*1700m Machine main function and characteristicWith horizontal frame design, controlled by industrial programmable PLC. It is used for winding and wedge automatically inserting. It adopts AC servo motor driving system, AC frequency conversion speed regulation system, pneumatic system. It can achieve wedge length setting, feeding, cutting, forming and inserting into stator together with coil automatically. Coil inserting speed can be set at different section. Wedge feeding mode can be set according to different motor. Euipped with human-machine control interface, it has the function of status display, malfunction alarm, various parameter.

This series winding inserting machine mainly apply to air conditioner motor, washing machine motor, compression motor, fan motor, generator motor, pump motor, single and three phase induction motor, etc. Equipped with servo driven system, the machine can inserti coil and wedge into stator slot simultaneously. Firstly, machine will cut wedge, then do the forming. Then it will insert the coil and wedge into the stator. Different parameter could be set in human-machine interface. Technical parameter: Main technicaldata Stator stack length:  10--150mm Stator OD: Max. 160mm Stator ID: 30~110mm Tooling traveling distance: Max.60mm Suitable wire material: copper aluminium wire Slot number: 8~48slots Max. slot filling rate: 80% Power: 380V5060HZ 3Kw Machine weight: about 850kg Machine dimension: L1850*W650*1700m Machine main function and characteristicWith horizontal frame design, controlled by industrial programmable PLC. It is used for winding and wedge automatically inserting. It adopts AC servo motor driving system, AC frequency conversion speed regulation system, pneumatic system. It can achieve wedge length setting, feeding, cutting, forming and inserting into stator together with coil automatically. Coil inserting speed can be set at different section. Wedge feeding mode can be set according to different motor. Euipped with human-machine control interface, it has the function of status display, malfunction alarm, various parameters setting etc. 

This armature winding machine can enter into single action debugging whenchanging the mould for winding other rotors after pressing the single action debuggingbutton, and then the screen will display as drawing 15 and 16. Each button isfor related cylinder, you could change winding method between general windingand hook sleeve winding by pressing the button at the downside of screen, so asto adapt to different rotors. Technical Parameter 1.    Wire diameter: Φ0.16~Φ1.2mm 2.    Winding slots: even number 3.    Winding turns: 0~999 4.    Rotor diameter: Φ20~Φ60mm 5.    Rotor stack height: 10~60mm  6.    Commutator diameter: Φ8~Φ40mm 7.  Rotorshaft diameter: Φ5~Φ15mm 8.  Rotorshaft length: ﹤250mm 7.  Windingmotor speed: 0~2500rpm 8.  Indexingmotor speed: 0~3000rpm 9.  Controlsystem: Mitsubishi PLC control 10. Drive system: Mitsubishi (or YASKAWA) ACservo system 11. Input power supply: 3-phase AC: 380V±10%, 5060HZ 12. Input air resource: 4~6kgcm2   13. Weight: about 1180kg 14. Outside Dimension: L×W×H   2000mm×1300mm×1800mm   Machine characteristics Thewire end can clamp or cut, which can largely save the wire. Thehanging part is sleeve protected which is quick and reliable. Theflying fork is made of alloy aluminum with high strength. Thebalance of the mould and the load adopts star-shape structure, so it is muchmore

Power tool armature winding equipmentmachine This armature winding equipment adopts 2 winding headers to drive, so the structure is very simple. The windingservo motor transfer the force to the main shaft and the two winding boxes arefixed under the table, the slide boxes are linked to the bottom box by 4 linerbearing, the front and back motion of the slide box is driven by 2 cylinders.The big travel is for mould close while the small travel for quickly change mould. Technical Parameter 1.    Wire diameter: Φ0.16~Φ1.2mm 2.    Winding slots: even number 3.    Winding turns: 0~999 4.    Rotor diameter: Φ20~Φ60mm 5.    Rotor stack height: 10~60mm  6.    Commutator diameter: Φ8~Φ40mm 7.  Rotorshaft diameter: Φ5~Φ15mm 8.  Rotorshaft length: ﹤250mm 7.  Windingmotor speed: 0~2500rpm 8.  Indexingmotor speed: 0~3000rpm 9.  Controlsystem: Mitsubishi PLC control 10. Drive system: Mitsubishi (or YASKAWA) ACservo system 11. Input power supply: 3-phase AC: 380V±10%, 5060HZ 12. Input air resource: 4~6kgcm2   13. Weight: about 1180kg 14. Outside Dimension: L×W×H   2000mm×1300mm×1800mm Machine function and characteristic This armature winding machine is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature. Automatic feeding, winding, indexing and wire cutting.

This armature slot coil winding machine has two working stations; it can wind two rotors at same time. It is suitable for small size rotors. Main parameter machine main technical parameter power source 220vac ±10%    50hz main motor power ≤1.5kw max rotation speed of main spindle 3000rpm no. Of station 2 stations wire diameter range 0.2mm~0.6mm armature slots range 3 slots or 5 slots armature o.d. Range φ30mm~φ43mm    stack length range 15mm~25mm armature spindle range φ5.5mm air source 0.4mpa~0.6mpa working temperature 45℃ store temperature 50℃ working humidity

(1)  machine mainfunction and ch aracteristic this stator coil inserting machine is used to insert coil and wedge into stator slots. The whole insertion process only takes 20 seconds. Machine is very easy to operate and the mantainance is simple. It can increase the productivity and save labor cost.  (2) main technical data stack height 10-90mm90-120mm max stator od 160mm stator id range 40-110mm air pressure 0.5-0.8mpa power supply 380v50hz power 2.5kw0.75kw dimension 1500x800x1700mm weight 900kg (3) application it is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor. Information needed for stator winding inserting machine inquiryit will be better if customer could send us detailed drawing including below information.1. Stator lamination drawing2. Stator stack drawing3. Wire connection drawing 4. Stator application5 required productivity6 other technical requirementcompetitive advantageswe have overseas service center.variety of application, easy operation.it is suitable for stators with different model number and dimension.the operation and tooling change process is easy.machine is controlled by plc.all the parameter can be set in the touch screen.we directly supply our machines to many countries, like usa, france, turkey, iran, india, brazil, argentina, mexico etc.we could customize machine for our customer as per their requirement.

Full-automatic transformers stator coil winding machine (1) Machine function and characteristic of stator coil winding machine This Stator Coil Winding Machine is specially designed for multiple wire parallel coil winding such as alternator, servo motor and three phase motor. This stator coil winding machine adopts special purpose controller which could set the function of arraying direction, winding start point, slow starting, slow ending, sides stop, auto width, auto reset, ect.   (2) Main Technical parameter of  stator coil winding machine Product name RX2-250stator coil winding machine Swing diameter ≤350mm Effective length of tooling ≤400mm Wire head 3 pcs Wire diameter 0.2~1.5mm Max RPM 1600RPM Power supply 220V5060Hz 1.5Kw Air pressure 0.4MPa Machine Weight 250Kg Machine Dimension 1300mm*1260mm*1280mm (3) Machine function and characteristic of stator coil winding machine This machine adopts special purpose controller which could set the function of arraying direction, winding start point, slow starting, slow ending, sides stop, auto width, auto reset, ect.

NIDE FULL automatic two working stations stator coil winding machine (1) Application of  NIDE full automatic two working stations stator coil winding machine This stator coil winding machine is suitable for 2 poles, 4 poles and 6poles coils winding.   (2) Main technical data of NIDE full automatic two working stations stator coil winding machine Product Name two working stations stator coil winding machine Winding head 1pc Wire diameter 0.2~1.2mm Winding speed ≤2500RPM Max stator OD 160mm Max stack height 100mm Fly fork diameter 300mm Transfer number 1~5 section Power supply 380V5060HZ  7KW Weight about 1000kg Dimension L2400*W1000*2450mm    (3) Machine main function and characteristic of NIDE full automatic two working stations stator coil winding machine Winding tooling: each machine has one set winding tooling and three vertical winding forms. The whole set of tooling can be changed, and it takes about 15min. The turntable is two stations structure. It adopts servo system to rotate and index transfer form. Allow three wires winding simultaneously. Main spindle is controlled by servo motor.  The coil turn number accuracy is ±1 turn. The working rotation speed can be set .  Machine has no distinct vibration and noise. Free of enamel damage and wire snap. Once the copper wire is run out, machine will automatically stop. PLC can set turn number, winding speed, tooling sunk height, tooling sunk speed.

The design of stator winding final forming machine is  based on the flexible principles. Machine is driven by hydraulic system, and controlled by plc programming. Therefore, machine can do inner expansion, outer wrapping and edge forming to form the stator coils, in order to acheive  appropriate winding outside dimension after lacing. Easy operation and simple tooling change.technical parameter: stator id 80~140mm stator od  ≤210mm stack height 80~200mm displacement of cylinder 20f power supply 380v5060hz power 1500w machine productivity around 1500pcs8hours weight 700kg dimension 650mm × 900mm × 2300mm   competitive advantages variety of application, easy operation.we directly supply our machines to many countries, like usa, france, turkey, iran, india, brazil, argentina, mexico etc.we could customize machine for our customer as per their requirement. We have overseas service center.  it is of highly efficiency and qualified forming. high technology, stable performance and reasonable price. Information needed for forming machine inquiryit will be better if customer could send us detailed drawing including below information.1. Stator lamination drawing2. Stator stack drawing3. Stato winding drawing4. Required productivity5. Other technical requirement if possible, it will be better if customer can send us samples.

Theelectric balancer coil winding machine machine is designed for the wheel motor coil winding. It equips with the servo control system. This coil winding machine could diagnose the fault, count the output, etc. The other function such as auto winding, multi-diameter wires winding, auto indexing, auto skip slot and winding speed could be programmed. The machine is easy to operate and maintain. (1) technical parameter: wire diameter:0.2~1.3mm stator od:80~200mm winding no.:1~9 stator height: 18~35mm power supply: 220v 5060hz 1.5kw weight:700kg dimension:1300x800x1500mm (2) application: it is suitable for wheel motor coil winding. (3) information needed for electric balancer coil winding machine inquiry it will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementif possible, it will be better if customer can send us samples.

Big Stator Coil Winding Machine can achieve auto winding, auto arraying, slot acrossing, auto getting through wax tube and output setting function. The coil winder is suitable for winding the coil for big power motor or big size stator. Big Stator Coil Winding Machine could produce different dimension coils which is for same series size stator by adjusting the tooling, and tension is adjustable. Technical parameter: Swing diameter ≤450mm Effective length of the tooling ≤400mm Parallel wire number ≤16 pcs Wire diameter 0.3~1.2mm Wire arraying width 400mm Power supply 220V5060Hz 2.2KW Air supply 0.4~0.6MPa Weight 950Kg Dimension: 1500*1700*1550mm Application This Big Coil Winding Machine is suitable for winding the coil for big power motor. Competitive advantages Variety of application, easy operation.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.We could customize machine for our customer as per their requirement. We have Overseas Service Center.  Information needed for big coil winding machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirement If possible, it will be better if customer can send us samples.

This auto coil winding machine has two winding heads with four working station. The main phase and auxiliary phase can be wound simultaneously. Therefore, user no need to buy two separate machines to wind main phase and auxiliary phase. This machine is suitbale for high production capacity, high slot filling rate, small slot opening stator coil winding. Different winding mode can be selected in the touch screen, like auto skip, auto cutting and auto indexing. Other parameter also can be set in the touch screen, like continuous discontinuour winding method. (1) Main technical data Winding head: 2pc Wire diameter: 0.18~1.2mm Winding speed: ≤2500RPM Max stack OD: 200mm Max stack height: 150mm Fly fork diameter: 400mm Transfer number: 1~5 section Power supply: 380V5060HZ  7.5KW Weight: about 2000kg Dimension: L1900*W1100*2100mm (2) Application:This machine is suitable for 2 poles, 4 poles and 6poles coils winding. (3)Information needed for Automatic Stator Coil Winding Machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementIf possible, it will be better if customer can send us samples. (4)Operation step Power on the machine Set the parameter in the touch screen then select it. Thread wire into this machine Put the winding form into the machine Press the start button Machine will do winding process.

Meat grinder motor automatic stator wire making machine  main technical parameter: item specification wire diameter 0.15-1.3mm stator o.d range 50-150mm stack length 20-60mm pole no. 2 poles turn number 0-9999 spindle speed 0-450 rpm motor power 4.5kw air supply pressure 5-7 kgcm2 voltage three phase ac380v5060hz weight 1200kg dimension 1050(l)x2300(w)x1750(h)mm main electrical configuration:1. Mitsubishi plc 2. Ev4300c got 3. Mitsubishi frequency converter 4. Airtec cylinder and air source part 5. Mitsubishi tension control unit or wanner (at your option)faq: 1. What is the operation procedure of this machine? a.:fix the winding tools on stator core, then put stator core on the loading base, press start button, safety door will close, loading base will move inside to the winding position, machine will automatic winding and cut wire, at this time, operator could fix the winding tools on another two stator cores;after finishing winding, loading base will move outside, sfatety door opened, then take out the completed stator, and put another two stator cores on the loading base, one cycle is completed. 2.what is the most common malfunction of this machine? a.: sometimes, the machine will stop on one certain step, and not continue to running, in this case, there will be error information displayed on the touch screen, usually, the reason is that the sensor of next step is not on the right position, so machine can not continue to next step, just check the sensor position.

This type of stator assembly line are consisted of serval stand alone machines, including paper inserting machine, coil winding machine, coil winding inserting machine, lacing machine, forming machine and testing machine. It can be used for different motor types, such as bldc, pump motor, car motor, induction motor, 3 phase motor ect. This automatic stator production line including paper inserting machine, coil winding machine, coil winding inserting machine, lacing machine, forming machine and testing machine. There are serval type of paper inserting machine which can meet various requirement. Theproduction capacity ≤1sslot (exclude the loadingunloading time). Primary qualification rate ≥99%, after rework, the rate ≥99.9% for the coil winding machine, it covers a wide range of stator dimension and wire diameter. Meeting the various requirement. The most efficient coil winding machine of this stator production machine line is equipped with four winding heads and eight operation stations. High slot filling rate, small slot opening stator coil winding. Winding mode, such as auto skip, auto cutting and auto indexing could be completed at a time successively, parameter could be set in human-machine interface. Continuous discontinues winding way and meets the 2 poles. 4 poles, 6 poles coils winding. Coil winding inserting machine can insert stator coil and wedge into the stator slot automatically. It reduces the labor and improve the efficiency and accuracy.

This type of stator production line is widely used for the mass production of motor stators, applied in many fields, such as BLDC, pump motor, car motor, induction motor, 3 phase motor ect.  This line is made  of serval stand alone machines, including paper inserting machine, coil winding machine, coil winding inserting machine, lacing machine, forming machine and testing machine. It can be used for different motor types, This automatic stator production line including paper inserting machine, coil winding machine, coil winding inserting machine, lacing machine, forming machine and testing machine. There are serval type of paper inserting machine which can meet various requirement. Theproduction capacity ≤1sslot (exclude the loadingunloading time). Primary qualification rate ≥99%, after rework, the rate ≥99.9% For the coil winding machine, it covers a wide range of stator dimension and wire diameter. meeting the various requirement. The most efficient coil winding machine of this stator production machine line is equipped with four winding heads and eight operation stations. high slot filling rate, small slot opening stator coil winding. Winding mode, such as auto skip, auto cutting and auto indexing could be completed at a time successively, parameter could be set in human-machine interface. Continuousdiscontinues winding way and meets the 2 poles. 4 poles, 6 poles coils winding. Coil winding inserting machine can insert stator coil and wedge.

This automatic stator wire winding machine has two working station and two winding heads. Therefore,   it is of great high automation. During operating,   the winding parameter could be set in the touch screen. This coil winder could achieve below process automatically,   winding process, indexing process, cutting process. Machine could automatically wind the coil into a transfer former orderly so as easy to do winding inserting process. This coil winding machine is suitable for high slot filling rate, small notch stator. The winding tension is adjustable.  I. Technical data Wire diameter range 0.17-1.2mm Max winding speed 3000rpm Circle 0.1 Power 380V- 5060HZ Weight 1100kg Air pressure 0.5mpa Dimension 1800 X1100 X2200mm   II.  Machine main function and characteristic l. Winding tooling: each machine has one set winding tooling and three vertical winding forms. 2. The whole set of tooling can be changed, and it takes about 15min. 3. The turntable is two stations structure. It adopts servo system to rotate and index transfer form. 4. Allow three wires winding simultaneously. 5. Main spindle is controlled by servo motor. The coil turn number accuracy is ±1 turn. 6. The working rotation speed can be set. Machine has no distinct vibration and noise. 6. Free of enamel damage and wire snap. Once the copper wire is run out, machine will automatically stop. 7. PLC can set turn number, winding speed, tooling sunk height.

High voltage electrical stator coil winding machine This stator coil winding machine is of high efficiency and automation because of  four winding heads and eight operation stations. it is designing especially for high production capacity requirement or mass production. During machine running, it automatically put the coil into the transfer former orderly.Winding mode such as auto skip, auto cutting and auto indexing could be completed at a time successively; All winding parameter could be set in touch screen interface, It meets the 2 poles, 4 poles and 6 poles coils winding and other high slot filling rate, small slot opening stator coil winding.  Application This machine is suitable for 2 poles. 4 poles, 6 poles coils winding. Specification: Model no. RXL3-100 Wire diameter 0.19-1.2mm Swing diameter 220mm Operation station 8 Winding head 4 Max Thickness of stator lamination 100 mm Max Stator ID 160mm Max RPM 2500rpm Air source 0.4mpa Power supply 380V- 5060HZ Information needed for Automatic Stator Coil Winding Machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementIf possible, it will be better if customer can send us samples. Operator step  1.Power on the machine 2.Thread wire this this motor 3. Set the winding parameter in the touch screen 4. Press the "start" button

The purpose of this Segway scooter winding machine is to wind the wheel motor. Equipped with the servo control system, this sergway scooter winding machine could count the output and diagnose the fault. Auto winding, multi-diameter wires winding, auto indexing, auto skip slot and winding speed could be programmed. The machine is easy to operate and maintain. Application:  It is suitable for wheel motor coil winding. Technical parameter: Wire diameter:0.2~1.3mm Stator OD:80~200mm winding no.:1~9 Stator height: 18~35mm Power supply: 220V 5060HZ 1.5KW Weight:700KG Dimension:1300x800x1500mm Competitive advantages Variety of application, easy operation. We have Overseas Service Center. It is suitable for rotor or stator with different modelnumber and dimension. The operation and tooling change process iseasy. We could customize machine for our customeras per their requirement. We directly supply our machines to manycountries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexicoetc.This machine is controlled by PLC. All the parameter could be seton the touch screen, Information needed for Electric balancer coil winding machine inquiry It will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementIf possible, it will be better if customer can send us samples. Machine winding structure

This type big dimension stator coil winding machine adopts special purpose controller to realize the function of auto winding, auto arraying, slot crossing, auto getting through wax tube and output setting, etc. The tooling could be auto extend and retract. Therefore, it is no need to discharge the tooling when taking out the finished coil. Thus it can reduce the labor and improve the efficiency. It could produce different dimension coils which are for same series size stator by adjusting the tooling, and tension is adjustable too. Technical parameter: Swing diameter ≤450mm Effective length of the tooling ≤400mm Parallel wire number ≤16 pcs Wire diameter 0.3~1.2mm Wire arraying width 400mm Power supply 220V5060Hz 2.2KW Air supply 0.4~0.6MPa Weight 950Kg Dimension: 1500*1700*1550mm Application This Big Coil Winding Machine is suitable for winding the coil for big power motor. Information needed for big coil winding machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirement If possible, it will be better if customer can send us samples. Competitive advantages Variety of application, easy operation.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.We could customize machine for our customer as per their requirement. We have Overseas Service Center.

This stator coil winding machine is suitable for high slot filling rate, small notch stator. The winding tension is adjustable.  This coil winder could achieve below process automatically,   winding process, indexing process, cutting process.  Machine main function and characteristic l. Winding tooling: each machine has one set winding tooling and three vertical winding forms. 2. The whole set of tooling can be changed, and it takes about 15min. 3. The turntable is two stations structure. It adopts servo system to rotate and index transfer form. 4. Allow three wires winding simultaneously. 5. Main spindle is controlled by servo motor. The coil turn number accuracy is ±1 turn. 6. The working rotation speed can be set. Machine has no distinct vibration and noise. 6. Free of enamel damage and wire snap. Once the copper wire is run out, machine will automatically stop. 7. PLC can set turn number, winding speed, tooling sunk height, tooling sunk speed and winding direction. 8. X and Y spindle of wire hooker and wire cutter adopts servo system. It can adjust the length of bridge wire and lead wire. 9. Tooling sunk adopts servo system. The max segment number of tooling sunk is 6. Technical data Wire diameter range 0.17-1.2mm Max winding speed 3000rpm Circle 0.1 Power 380V- 5060HZ Weight 1100kg Air pressure 0.5mpa Dimension 1800 X1100 X2200mm Main components Servo motor: Mitsubishi Control system: Yitu Taiwan Touchscreen: Tongtai Sensor

Long lamination stack big Dimension stator coi winding machine Technical parameter: Swing diameter ≤450mm Effective length of the tooling ≤400mm Parallel wire number ≤16 pcs Wire diameter 0.3~1.2mm Wire arraying width 400mm Power supply 220V5060Hz 2.2KW Air supply 0.4~0.6MPa Weight 950Kg Dimension: 1500*1700*1550mm Application This Big Coil Winding Machine is suitable for winding the coil for big power motor. Big Stator Coil Winding Machine can achieve auto winding, auto arraying, slot acrossing, auto getting through wax tube and output setting function. The coil winder is suitable for winding the coil for big power motor or big size stator. Big Stator Coil Winding Machine could produce different dimension coils which is for same series size stator by adjusting the tooling, and tension is adjustable. Information needed for big coil winding machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirement If possible, it will be better if customer can send us samples. Competitive advantages Variety of application, easy operation.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.We could customize machine for our customer as per their requirement.

This forming machine is used for statror coil to do final forming. After the lacing process, the coil shape might be out of shapesome. Therefore, it is necessory to do the forming after lacing process. Powered by hydraulic system, machine drives the forming tooling system, so as to control the expansion and shrink of expansion blade and forming blade to complete the stator coil forming.Technical parameter: Stator ID 80~140mm Stator OD  ≤210mm Stack height 80~200mm Displacement of cylinder 20F Power supply 380V5060Hz Power 1500W Machine productivity around 1500pcs8hours Weight 700Kg Dimension 650mm × 900mm × 2300mm   Competitive advantages Variety of application, easy operation.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.We could customize machine for our customer as per their requirement. We have Overseas Service Center.  It is of highly efficiency and qualified forming. High technology, stable performance and reasonable price. Information needed for forming machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator lamination drawing2. Stator stack drawing3. Stato winding drawing4. Required productivity5. Other technical requirementIf possible, it will be better if customer can send us samples.

The stator coil forming machine is designed with a horizontal type stator. Therefore, it is suitable for big power stator, long stack length stator or other big size stators. The stator loading and unloading process will be much easy than the vertical type.  this coil forming machine is driven by hydraulic system, and controlled by plc. It expands the inner of the over-hang during forming process; it effectively ensures the over-hang dimension and the appearance. all the parameter could be set on the touch screen, (1) applicationit is applied to deep water pump motor and other various type of overlength motor stator. (2) main technical datastator   od: ≤φ350mmstator   id:φ80-φ230mmstack   height:100mm-400mmdisplacement of cylinder: 30lminpower supply:380v   5060hzweight ≈1800kgdimension:(l)2550×(w)1930×(h)2200mm working station: single tooling could be adjusted (3) tooling change during tooling change, just change the block, inner expansion core and upper stator fixing sleeve. The core adopts quick release structure. For the block and upper stator fixing sleeve, it can be quickly changed by loosening the related screws. When change different stack stator, loosen related screws, then drive the gear and rack by handle. After adjustment, tighten the screws. (4)information needed for coil forming machine inquiryit will be better if customer could send us detailed drawing including below information.1. Stator lamination drawing

Stator automatic slinky spiral winding production machine This slinky production machine is used to for spiral winding of die-stamped strip of sheet iron. It is consisted of frame, slinky tooling, transmission mechanism and electric control system. The machine frame is made out of aluminum profiles with solid steel supporting plate, on which main machine units are disposed. With a punch needle structure, the slinky tooling will drive the rotation mechanism. During running, the pinch roller will form the outside dimension. Machine is of high efficiency and it is easy to control the dimension. The slinky tooling is under several processing treatment to ensure its duration and accuracy.   During operation, manually load the material into the slinky tooling. Then set the related parameter and press start button. Machine will do all the process. After that, manually unload the material.     Main data Power source:           AC 220V50Hz Control power:           DC24 V100W Servo motor:           AC220 V1.5KW Slinky speed:           0-200 rpmmin Air source:         0.6Mpa ~ 0.8Mpa stator core made by this machine Machine video Beside slinky production machine, we also provide other stator production machines, like stator coil winding machine, coil inserting machine, stator forming machine, lacing machine etc.

Compressor motor stator winding and inserting machine This stator winding and inserting machine is used to wind coil into tooling, then insert coil and wedge into stator slot. The whole process is done by machine automatically. It has four working stations, two for coil winding, the other two for coil and wedge inserting. Wedge will be cut, formed, and inserted by machine.  During winding, the coil will be auto wound to the tooling, so as to avoid the wire damage and snap caused by wire cross and disorder during manual wire transfer.  This machine can detect the wire coating damage. The inserting station is controlled by servo motor. The parameter can be set in the touch screen. ApplicationIt is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor and other motors. Main technical data Stator OD ≤φ150 mm Stator ID: ≤φ110 mm Stack Height: 30-120 mm Height of Coil: 3 Appropriate Wire: φ0.18-φ1.2 mm Winding inserting mode: chained same core Pitch time: ≤40 spc Air Pressure: 0.6-0.8 MPa Power supply: 380 V   5060 Hz 15 Kw Weight  ≈4000 Kg Dimension: (L)2000×(W)1300×(H)2300 mm Competitive advantages Variety of application, easy operation.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.We could customize machine for our customer as per their requirement. We have Overseas Service Center.

• transportationshipment

This Automatic BLDC Needle Inslot Coil Winding Machine is applied to winding BLDC motor stator. Equipped with servo system. this needle winding machine can automatically insert wire end, winding, arraying, indexing, cutting, demolding. Meanwhile,  this machine can diagnose fault, count output, etc. Other processes like auto winding, multi-diameter wires winding, auto indexing, auto skip slot and winding speed could be programmed in the touch screen. This machine is easy to operate and maintain.   Technical parameter    Stator ID    ≥25mm    Stator OD    ≤150mm    Stack height    10~100mm    suitable wire diameter    0.3-1.0mm    Power supply     220V 5060Hz     Weight    600KG    Dimension    1400*900*2000mm   Application:This machine(inslot winding machine) is suitable for winding fan motor and BLDC stator. Operation step1.  Power on the machine2. Thread the wire3. Put stator to the working station table4. Adjust the tooling according to different model stator5. Set the stator diameter in the touch screen then select the pre-set data.6. Press "start" button.7. Machine will automatically do winding.8. Take out the stator Competitive advantagesVariety of application, easy operation.We have Overseas Service Center.The operation and tooling change process is easy.

Thistype of  BLDC needle coil winder machine is widely applied in BLDC stator. Equiping with servo system, this needle winder can automatically do winding, arraying, indexing, cutting, demolding process. Other function such as auto winding, multi-diameter wires winding, auto indexing, auto skip slot and winding speed could be edited in the touch screen. It can also diagnose fault, count output, etc. This machine is easy to operate and maintain.    Technical parameter    Stator ID    ≥50mm    Stator OD    ≤250mm    Stack height    10~200mm    suitable wire diameter    0.3-1.4mm    Power supply     220V 5060Hz     Weight    750KG    Dimension    1400*1000*2000mm  Application:This machine is suitable for winding fan motor and BLDC stator. Operation step1.  Power on the machine2. Thread the wire3. Put stator to the working station table4. Adjust the tooling according to different model stator5. Set the stator diameter in the touch screen then select the pre-set data.6. Press "start" button.7. Machine will automatically do winding.8. Take out the stator Competitive advantagesVariety of application, easy operation.We have Overseas Service Center.The operation and tooling change process is easy.It is suitable for stators with different model number and dimension.We could customize machine

This BLDC stator needle winding machine is suitable for winding BLDC stator. It equips with servo system. It can automatically interwine wire end, winding, arraying, indexing, cutting, demolding. Technical parameter of BLDC motor needle winding machine:Statck ID: ≥25mmStack OD; ≤150mmStack height: 10~100mmSuitable wire diameter: 0.3~1.0mmPower supply:220V 5060HZ Working station: two working station Control method; PLC Date set: in touch screen Light curtain aviableWeight 600KGDimension: 1400x900x2000 Application:This BLDC winding machine is suitable for winding BLDC stator. Competitive advantages Variety of application, easy operation.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.We could customize machine for our customer as per their requirement. We have Overseas Service Center. Information needed for BLDC Stator Coil Winding Machine inquiry It will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementIf possible, it will be better if customer can send us samples.

This BLDC winding machine has two working stationS. All the parament can be set in the touch screen. (1) Technical parameter of BLDC motor needle winding machine:  Stator O.D ≤250mm Statck ID:  ≥50mm Wire diameter 0.3~1.4mm Stator stack length 10~200mm Working station two working station Control method PLC Date set in touch screen Light curtain available Air pressure 5~7Kgcm2 Total power 2KW Voltage 220V 5060HZ Weight 750KG Dimension 1400x1000x2000mm (2) Application:This BLDC inslot winding machine is suitable for winding brushless direct current stator. (3) Machine function and characteristic of  BLDC motor needle winding machine:This machine is suitable for winding BLDC stator. It equips with servo system. It can automatically interwine wire end, winding, arraying, indexing, cutting, demolding.  (4)Operation step1.  Power on the machine2. Thread the wire3. Put stator to the working station table4. Adjust the tooling according to different model stator5. Set the stator diameter in the touch screen then select the pre-set data.6. Press "start" button.7. Machine will automatically do winding.8. Take out the stator(5) Information needed for BLDC Stator Coil Winding Machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirement If possible, it will be better

This kind of neddle winding machine is used to winding stepping motor stator with multi poles or BLDC motor. Machine is controlled by PLC and touch screen. All the parameter can be set in the touch screen. It will do automatic winding, indexing. Operator only needs to load and unload stator manually.(1) Main technical parameter of BLDC Motor Stator Coil Winding Machine: Stator stack height 7~100mm Stator O.D 15~650mm Wire diameter 0.1~0.9mm Slot number 4, 6, 8, 10, 12 Air source 5~7kgcm Power source AC 220V±10% 5060Hz Total power 1KW Weight 350Kg Dimension 1550*900*1450mm (2) Applications: This type of BLDC Motor Stator Coil Winding Machine is suitable for multi-pole stator winding,   (3) Machine function and characteristicIt can automatically winding, indexing and cutting. This machine is easy to operate, only need to load and unload stator.Easy operation, high automation. PLC and touch screen control.(4)Competitive advantages: Variety of application, easy operation. We have Overseas Service Center. It is suitable for rotor or stator with different modelnumber and dimension. The operation and tooling change process iseasy. We could customize machine for our customeras per their requirement. We directly supply our machines to manycountries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexicoetc.This machine is controlled by PLC. All the parameter could be seton the touch screen.

This type rotor inslot coil winding machine is used for external armature. It is easy to operate. Due to the high automation, this machine is more cost-efficent. Machine can do Automatical indexing and automatical winding process. Operator only needs to load and unload rotor by manual. The external rotor inslot coil winding machine is controlled by PLC. All the parameter can be set in the touch sreen.   Application: This External Armature Winding Machine is used for external armature winding.    Main technical data: Wire diameter 0.15~1.5mm Stator O.D 15~260mm Stack length 7~60mm Turn number 0~9999 Slot number Multi poles Winding speed 0~1500RPM Air pressure 5~7kgcm2 Power supply 220V5060Hz Total power 2.5KW Weight 600Kg Dimension 1150*2350*1500m Information needed for rotor winding machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Rotor lamination drawing 2. Rotor assemble drawing 3. Rotor stack drawing 4. Rotor winding diagram drawing: with rotor wire diameter and turn number 5. Commutator drawing 6. Required productivity 7. Other technical requirement If possible

Middle Forming is done after winding inserting but before winding lacing process. The whole schematic design of inner expansion, outer wrapping and edge forming ensures appropriate winding outside dimension. This machine is driven by hydraulic system and controlled by PLC programming. Individual guard teeth in each slot settles fied wire and jump wire can ensure the reliability of electrical leakage distance. Technical Data: Stator I.D 30~100mm Max stator O.D 160mm Stator stack height 16~100mm Displacement of oil pump 20F Voltage 380V50Hz Power 3750W Machine productivity Around 1500pcs8hours Weight 1000KG Dimension 1200mm * 750mm * 2500mm        Machine main function and characteristic This machine adopts whole hydraulic system and PCL program. This machine can adjust the forming stack length by changing washer. This machine has five oil cylinders which work individually to expend inner coil, wrap outer coil and form hang over. After forming, there is no copper wire enamel broken or wire snap. and coil OD and ID is close to the final forming dimension. Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken. Production capacity ≤14sset (exclude loadingunloading time) Primary qualification rate ≥98.5%, after rework, the rate ≥99.5% This machine adopts safety grating protection system. Operator need to stand when operating.

Enter and Exit Station Stator Coil Middle Forming Machine is used for stator winding middle forming, it is mainly driven by the hydraulic system, controlled by industrial PLC. 5 pieces individual cylinder execute external wrapping, internal expansion, overhanging end forming. It is of fast tooling change and extensive compatiblity property.The enter and exit station is much convenient and safe for loading and unlaoding stator.I. Technical parameter Stator I.D 30~110mm Stator O.D ≤160mm Stack heigh 30~150mm Displacement of cylinder 20F Power supply 380V5060Hz 3.75Kw Weight 800Kg Dimension L1300*W1000*H2400mm II. main components PLC: Mitsubishi Oil pump: Jingyuan Sensor: Autonics Buttonswitch: Schneider Other electric elements: DelixiSchneider   III. Machine main function and characteristic 1. This machine adopts whole hydraulic system and PCL program. 2. This machine could adjust the forming stack length by changing washer. 3. This machine has five oil cylinders which work individually to expend inner coil, wrap outer coil and form hang over. 4. After forming, there is no copper wire enamel broken or wire snap, and coil OD and ID is close to the final forming dimension. 5. Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward.There is no wire enamel broken. 6. Production capacity ≤15sset (exclude loadingunloading time) 7. Primary qualification rate ≥98.5%, after rework

This ceiling fan coil winding machine has two working stations. Controlled by micro computer,  this winding machine can do  auto winding, auto array, auto indexing; array and indexing are controlled by stepping motor, winding is controlled by frequency converting motor, turn number could be accurated up to 0.1 round. Application:Ceiling Fan Coil Winding Machine is suitable for winding ceiling fan stator, external armature such as frequency conversion alternator and generator armature. Technical parameter: Wire diameter 0.05~0.45mm Stator O.D 100~163mm Slot number Less than 24 slots Stack height 6~30mm RPM Max 2500RPM Voltage 220V50Hz, or customize Power AC 1.5KW Weight 135Kg Dimension 1350mm*630mm*1130mm Competitive advantages Variety of application, easy operation.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.We could customize machine for our customer as per their requirement. We have Overseas Service Center.  Information needed for Automatic Stator Coil Winding Machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementIf possible, it will be better if customer can send us samples.

Segway PT electric bicycle winding machine The Segway PT electric bicycle winding machine equips with servo control system. It is special designed for the segway , electric bicyle and wheel motor. It could  auto winding, multi-diameter wires winding, auto indexing, auto skip slot and winding speed could be programmed. The machine is easy to operate and maintain. Application: The winding machine is suitable for wheel motor coil winding. Technical parameter: Wire diameter:0.2~1.3mm Stator OD:80~200mm winding no.:1~9 Stator height: 18~35mm Power supply: 220V 5060HZ 1.5KW Weight:700KG Dimension:1300x800x1500mm Information needed for Electric balancer coil winding machine inquiry It will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementIf possible, it will be better if customer can send us samples.

This wedge expending is designed with ahorizontal structure. The main power is pneumatic system. The footswitch controls onoff, which is easy to operate, It won't damage wedge, insulation paper or coil.  Wedge isstill at right position after expending. Stator with same slotwidth and internal diameter can share one tooling, (1)Application: Thismachine is used for wedge expending. (2)Technical parameter: ·         Stator OD:≤160mm ·         Stator ID :50-110mm ·         Stack height: 20~200mm ·         Expending blade stroke:≤3mm ·         Power supply: 220V 5060Hz ·         Weight:250Kg ·         Dimension:1150*500*1000mm ·         Working station: single ·         Certificate: CCC ·         After sales service: oversea center avaiable   (3) Information neededfor paper insertion machine inquiry Itwill be better if customer could send us detailed drawing including belowinformation. 1. Stator lamination drawing 2. Stator stack drawing 3. Stator winding drawing 4. Stator winding distribution drawing 5. Required expanding dimension, 6. Other technical requirement.

This machine is designed with a semi-automatic type and with one working station. Controlled by the PLC and touch screen, all the stator related information can be set in the touch screen. And since it is a semi-auto type, therefore, the tooling change time is greatly decreased. Therefore, this one is special for the motors with a variety model number but low output. Nide well constructs its machines, offering its customes a pefect solution, even the tooling, which is manufactured to an extremely high standard and well polished and treated to give perfect results. Application:This machine is suitable for three phase motor, fan motor and other motor, with a veriety model number but low output. Specification: Stator I.D 20~110mm Stator O.D 0~160mm Stator stack length 20~150mm Tooling travel 60mm Appropriate wire CopperAlum wire Slot number range 8~48slots Power source 380V5060Hz 3Kw Dimension 1500*680*1500mm Weight ≈ 400kg Information needed for stator winding inserting machine inquiryIt will be better if customer could send us detailed drawing including below information.1. Stator lamination drawing2. Stator stack drawing3. Wire connection drawing 4. Stator application5 Required productivity6 Other technical requirementOperation stepPower on the machineInsert the wire by winding formAdjust the tooling according to different model statorPut stator to the toolingSet the stator diameter in the touch screen then select the pre-set data.Press "start" button. 

Automatic BLDC motor stator winding line This BLDC motor winding line is used to winding BLDC motor stator. It can wind coils into BLDC slot.  It equips with servo system. It can automatically interwine wire end, winding, arraying, indexing, cutting, demolding. Technical parameter of BLDC motor needle winding machine:Statck ID: ≥25mmStack OD; ≤150mmStack height: 10~100mmSuitable wire diameter: 0.3~1.0mmPower supply:220V 5060HZ Working station: two working station Control method; PLC Date set: in touch screen Light curtain aviableWeight 600KGDimension: 1400x900x2000 Application:This BLDC winding machine is suitable for winding BLDC stator. Competitive advantages Variety of application, easy operation.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.We could customize machine for our customer as per their requirement. We have Overseas Service Center. Information needed for BLDC Stator Coil Winding Machine inquiry It will be better if customer could send us detailed drawing including below information.1. Stator drawing2. Stator winding drawing3. Winding distribution drawing4. Other technical requirementIf possible

Automatic ceiling fan small Double flyer armature rotor wire Coil winding machine for sale in INDIA 1.Application of the rotor wire coil winding machine The automatic coil winding machine is Widely used in a variety of electrical motor winding tools, such as table fans, ceilling fans, air conditioning, washing machines and so on. 2.Description of the rotor wire coil winding machine The automatic rotor coil winding machine adops Double flyer and the armature winder is used for even number slot motor wire winding. The rotor winder adopts Japanese frequency speed adjustment, low rise and accelerating, numeric code dialing setting operation speed and deceleration speed ahead, breaking and location accurate, foot stepping to loose tooling, automatic closing tooling. And Easy operating, save more labor and manufactory cost.  3.Main technical data of the rotor wire coil winding machine Product name ND-ZB-2G170 rotor Coil winding machine Power suply Voltage 220V±10%, 50HZ Power 0.8KW Wire Diameter 0.08-1.08mm Pre-set turns  0-9999 Advance Turns 0-9 Principal Axis Center Height 170mm Rotation Speed 0-1400rmin

This full automatic LED bulb assembly line is applied for various kinds of LED lights. It is special for mass production of LED strip and LED tube. Instead of vision localization, we use mechanical structure localization, which can reduce the cost and increase the stability. Modularization, can be used individually, or can compose the automatic production line on line. All lines can be automatic, lamp body assembling (power+ light source + shell ), lamp cap assembling (assemble lamp cap, arrange filament, rivet pressuring, drive the rivets, lampshade),  automatic manipulator release feeding and blanking of aging line, automatic packaging unit (Packing in cartons with card, paper plastic package)

LED tube LED light automatic production machine The production of LED light usually are high. Therefore, it can greatly reduce the production time and improve the efficiency by machines during mass production. Our machines are designed for mass production requirement with a wide application. All lines can be automatic, lamp body assembling (power+ light source + shell ), lamp cap assembling (assemble lamp cap, arrange filament, rivet pressuring, drive the rivets, lampshade),  automatic manipulator release feeding and blanking of aging line, automatic packaging unit (Packing in cartons with card, paper plastic package). Instead of vision localization, we use mechanical structure localization, which can reduce the cost and increase the stability. Modularization, can be used individually, or can compose the automatic production line on line. 

This full automatic LED light production machine is applied for various kinds of LED lights. It is special for mass production of LED strip and LED tube. Instead of vision localization, we use mechanical structure localization, which can reduce the cost and increase the stability. Modularization, can be used individually, or can compose the automatic production line on line. All lines can be automatic, lamp body assembling (power+ light source + shell ), lamp cap assembling (assemble lamp cap, arrange filament, rivet pressuring, drive the rivets, lampshade),  automatic manipulator release feeding and blanking of aging line, automatic packaging unit (Packing in cartons with card, paper plastic package)  LED light production machine is equipped with a touch screen; all the related parameter can be programmed there. With a coveyor, this production line can transfer the led bulb during production. It is of high automation and efficiency and easy to operate. 

This rotor die casting machine adopts a vertical structure. It can once make four products if the rotor outside diameter is within 40 mm. The tooling change is easy and fast. Machine is equipped with feeding device, cutting device and unloading device, meanwhile, it can rapidly close the mould.  Technical data of this rotor die casting machine Specification                        65T                                    mold clamping   force 650Kn Oil cylinder travel 480mm Max opening 800mm Injecting force 220Kn injection cylinder travel 170mm Working station area 580x720mm Motor power 11-4 KW Oil pump model number CY-40 Technical requirement 1.The machine is controlled by PLC. 2.Injection cylinder has three different injecting mode, slow injecting, fast injecting and secondary injecting. The injecting flow of fast injecting can be manually adjusted. 3.Machine is equipped with auto feeding device, cutting device and mold unloading device. 4.This machine has protector doors on all sides. It is pneumatic protector door in the fore-and-aft direction. 5.Machine is equipped with water cooling system. 6.Each machine is equipped with two pieces of stuff canister, which is customized. Rotor die casting machine video.

Rotor automatic aluminum die-casting machine Technical requirement 1.The die-casting machine is controlled by PLC. 2. Injection cylinder has three different injecting mode, slow injecting, fast injecting and secondary injecting. The injecting flow of fast injecting can be manually adjusted. 3. Machine is equipped with auto feeding device, cutting device and mold unloading device. 4.This machine has protector doors on all sides. It is pneumatic protector door in the fore-and-aft direction. 5. Machine is equipped with water cooling system. 6. Each machine is equipped with two pieces of stuff canister, which is customized. Parameter Specification 100T mold clamping   force 1000Kn Oil cylinder travel 480mm Max opening 800mm Injecting force  400Kn injection cylinder travel 180mm Working station area 680x820mm injection chamber OD 60-120 mm Motor power 15-4 KW Oil pump model number CY-63   Machine feature 1.Rapid mould closing 2. With feeding, cutting and mold unloading device 3. It can once make four products if the rotor outside diameter is within 40mm.  Rotor die casting machine video

This armature die casting machine is controlled by PLC. This casting machine is equipped with auto feeding device, cutting device and mold unloading device. Injection cylinder has three different injecting mode, slow injecting, fast injecting and secondary injecting. The injecting flow of fast injecting can be manually adjusted. This machine has protector doors on all sides. It is pneumatic protector door in the fore-and-aft direction.Machine is equipped with water cooling system.Each machine is equipped with two pieces of stuff canister, which is customized.   Machine feature 1.Rapid mould closing 2.With feeding, cutting and mold unloading device 3.It can once make four products if the rotor outside diameter is within 40mm.  Technical data of this casting machine Specification 160T mold clamping   force 1600Kn Oil cylinder travel 500mm Max opening 900mm Injecting force 500Kn injection cylinder travel 220mm Working station area                760x960mm                        Motor power 22-4 KW Oil pump model number MCY-80 Competitive advantages Variety of application, easy operation. We have Overseas Service Center. Machine is controlled by PLC. All the parameter can be set in the touch screen. It is suitable for stators with different model number and dimension. The operation and tooling changing process is easy. We could customize machine

This horizontal single side stator winding lacing machine is suitable for the big stator with high winding over-hang. The tooling is movable, and convenient for stator fast laoding and unloading, hence to reduce the labor strength effectively. The horizontal single side stator winding lacing machine adopts industrial PLC, human-computer interface and horizontal frame-structure design, the servo system machine accurately controls the lacing action. Different lacing methods such as slot-by-slot lacing, interval lacing and fancy lacing are programmable.  Technical data Stator I.D 110~210mm Stator stack height 100~260mm Stator O.D 175~300mm Over-hang height 20~65mm Slot number 8~48 slots Power source AC 220V±10% 5060Hz Total power 0.75KW Weight 450Kg Dimension 1160*1200*1500mm Machine structureThis machine is consist of machine body, needle, nozzle rotating part, needle fore and back movement, nozzle swing part, needle up and down movement part, stator indexing part, thread feeding, thread cutting part. Competitive advantagesVariety of application, easy operation.We have Overseas Service Center.Machine is controlled by PLC. All the parameter can be set in the touch screen.It is suitable for stators with different model number and dimension.The operation and tooling change process is easy.We could customize machine for our customer as per their requirement.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina

Four working station automatic stator winding and coil inserting machine This stator winding and coil inserting machine can do coil winding, coil inserting and wedge inserting at same time. Since it has four working station, it can greatly improve the working effiency. Meanwhile, it is efficiency and saves labor cost.  During winding, the coil will be auto wound to the tooling, so as to avoid the wire damage and snap caused by wire cross and disorder during manual wire transfer.  This machine can detect the wire coating damage. The inserting station is controlled by servo motor. The parameter can be set in the touch screen. (1) Main technicaldataStator OD:≤φ150mmStator ID:≤φ110mmStack Height:30-120mmHeight of Coil:3Appropriate Wire:φ0.18-φ1.2mmWinding inserting mode:chained   same corePitch time:≤40spcAir Pressure:0.6-0.8MPaPower supply:380V   5060Hz 15KwWeight ≈4000KgDimension:(L)2000×(W)1300×(H)2300mm (2) ApplicationIt is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor and other motors. (3) Competitive advantages Variety of application, easy operation.We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.We could customize machine for our customer as per their requirement. We have Overseas Service Center.  (4)Information needed for stator coil winding and inserting machine

For this paper shaping and cutting machine, the shaping and cutting process are all done by this machine, once start button is pressed. Edge folding, feeding length, width is adjustable, and fixed output can be set; suitable for manual motor manufacturer and manufacturer who has varies motor models(Heating function can be customized). Technical parameter: Feeding length 10~100mm Cutting width ≤2000mm Width of edge folded (cuffing) 2.5~4mm Cutting length ≤150mm Cutting thickness ≤0.35mm Power supply 220V5060Hz 0.5Kw Weight 180Kg Dimension 850*1100*1200mm     Application: This machine is suitable for manual motor manufacturer and manufacurer who has varies of motor models. Information needed for stator production lineinquiry It will be better if customer could send us detailed drawing including belowinformation. 1. Wedge andinsulation paper drawing and its material 2. Other technicalrequirement If possible, it will be better if customer can send us samples. Competitive advantages Variety of application, easy operation. We have Overseas Service Center. It is suitable for rotor or stator with different modelnumber and dimension. The operation and tooling change process iseasy. We could customize machine for our customeras per their requirement. We directly supply our machines to manycountries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexicoetc.This machine is controlled by PLC. All the parameter could be seton the touch screen, Besides machine

This stator lacing production machine adopts turntable plates structure with four working station, equipped with stator pressing device, auto feeding device, auto wire feeding device, auto knotting device, auto cutting device and ect. Overhang winding adopts twin needle lacing simultaneously. Needle transpositioning, hooking and stator indexing are controlled by five spindle servo system. Different lacing pattern can be set, such as slot by slot lacing, interval slot lacing and fancy lacing. With fast speed, low noise, simple operation and easy tooling change, this machine can be connected to automatic stator production line. Due to the four working station, this automatic stator coil lacing machine is of high automation.Moreover, this lacing machine is equipped with a conveyor to transfer the stators. It is conrolled by PLC, and all the parameter can be displayed and set in the touch screen. The machine can store different stator parameter.  During lacing process, operator load the stators, then the machine will automatically do the lacing process. Technical data of lacing machine Stator OD φ40-φ160mm Stator ID ≤100mm Stack Height 30-160mm Height of Coil ≤65mm Pitch time ≤14spc(24 slots) Air Pressure 0.4-0.6MPa Power supply 380V   5060Hz 6Kw Weight ≈1500Kg Dimension (L)2000×(W)1100×(H)1900mm Application It is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor.

This stator lacing machine has four working stations. It can automatically lace four stators at one time.  The turntable plates makes sure the high efficiency of this lacing machine. This machine is equipped with stator pressing device, auto feeding device, auto wire feeding device, auto knotting device, auto cutting device and ect. Different lacing pattern can be set, such as slot by slot lacing, interval slot lacing and fancy lacing. This lacing machine is equipped with a conveyor to transfer the stators. It is controlled by PLC, and all the parameter can be displayed and set in the touch screen. The machine can store different stator parameter.  During lacing process, operator load the stators, then the machine will automatically do the lacing process. With fast speed, low noise, simple operation and easy tooling change, this machine can be connected to automatic stator production line. ApplicationIt is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor. Technical data of lacing machine Stator OD φ40-φ160 mm Stator ID ≤100 mm Stack Height 30-160 mm Height of Coil ≤65 mm Pitch time ≤14spc (24 slots) Air Pressure 0.4-0.6 MPa Power supply 380V   5060Hz 6 Kw Weight ≈1500 Kg Dimension (L)2000×(W)1100×(H)1900 mm Information needed for stator lacing machine inquiryIt will be better if customer could send us detailed drawing including below information.