NingboSijeeOpticalCommunicationTechnologyCo.Ltd

Ningbo, China

SJ-New-1  Horizontal type Fiber Optic Splice Closure with two inletsoutlets Description:Provide optics, sealing and mechanical strength continuity splice protection devices.        Mainly in the pass-through structure for a variety of aerial cable, pipes, buried and other ways of laying and branch connections. Box of imported reinforced plastics, high strength, corrosion resistance, terminal structure suitable for the connection of the cable terminal room, the maturity structure, reliable sealing, easy construction. Widely used in telecommunications, networking systems, CATV cable, fiber optic cable network systems, and more Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way Dimension (mm): 53 *19*15CM Cables Entry & Exit:2Entry 2Entry Cable Diameter (mm): Φ7-Φ25 Sealing Structure : silicon gum material Sealing Material: PC Maximum capacity: Bunchy 12-192 cores ; Ribbon:288 cores Span-life: 30 years. Ningbo Sijee Optical Communication Technology Co., Ltd was established in 2002, our company has been operating for 15 years with the registration fee of 50 million RMB. The company is located in Ningbo, the exact address is No.20 Chuangxin East Road, Liyang Town, Ninghai, Ningbo, Zhejiang,  with the factory area of more than 28, 000 square meters. The company's products has passed the ISO9001 international quality system certification, GBT24001-ISO14001 standards and GBT28001-2001 standard

SJ-New-2 New type  Horizontal type Fiber Optic Splice Closure with 3 inletsoutlets is usually used with outdoor fiber optic cables; they provide space for the outdoor fiber optic cables to be spliced together. The fiber optic splice closures and the fiber trays inside will protect the spliced fiber and the joint parts of the outdoor fiber cables. Generally the fiber optic splice closures are dome type and horizontal types. Horizontal splice closures are more used. Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way Dimension (mm): 57*20*15.5CM Cables Entry & Exit:3Entry 3Entry Cable Diameter (mm): Φ7-Φ25 Sealing Structure : silicon gum material Sealing Material: PC Maximum capacity: Bunchy 12-144cores ; Ribbon:288 cores Span-life: 30 years. Components: Seal tape, Insulation tape, Nylon tie, optical cable heat shrinkable sleeve, mental hook, seal fittings, numeral bar, retaining ring Ningbo Sijee Optical Communication Technology Co., Ltd was established in 2002,  Sijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, Network Cabinet, ODF, fiber terminal box, Fiber Optic Patch Panel,  etc.

SJ-ABS-01  Fiber Optic Splice Closure,  Fiber Optical Splice Closure is made by cylinder, base, storing device, fiber optic cable fixed device, fiber strengthen fixtures, seal, cable sealing device, optical fiber splice units. It has a very high sealing performance, high strength engineering plastics poly carbonate(PC), external components and fasteners are all made of high quality stainless steel material. Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way Dimension (CM): 46.5*18.8*12CM  Cables Entry & Exit:2Entry 2Exit Cable Diameter (mm): Φ7-Φ15 Sealing Structure : Sticky cincture or silicon gum material Sealing Material: ABS or PC Maximum capacity: 144cores        Ningbo Sijee Optical Communication Technology Co., Ltd was established in 2002, The company has a talented and professional team engaging in sheet metal casecabinet processing, urban facilities, communication equipment research and development, design, manufacture and sales. Ningbo Sijee,  as a relatively large domestic telecommunications equipment and distribution products and plate metal case  cabinet suppliers, focuses on providing service to domestic and foreign operators, large domestic listed companies and radio and television bureaus to provide first-class products and FTTx overall solutions.

SJ-ABS-02  Fiber Optic Splice Closure, Fiber Optic Closure,  Cable Optic Joint Box,  Fiber Joint Closure is a horizontal or inline type, 3 inlets and 3 outlets. It belongs to the mechanical pressure seal splice closure system, and it is widely used for the terminations of communication fiber optic cables. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. It can be placed in aerial, underground direct buried, wall-mounted, manhole and duct applications.  Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic PC by numerical control equipment, therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation The strong housing and main components provide fire-resistant, water-proof, and quake-proof while protecting splices during pulling, tensioning and impacting. It ensures long-term reliability and usage under ambient temperature from -40℃ to +60 ℃.  Advanced internal structure design, thus fiber suffering no attenuation. The closure is spacious enough for winding and storing fibers  Flip style fiber splice trays are designed The curved radius meets with international standard Easy and fast to increase and reduce splice tray Innovative elastic integrated seal fitting Adopting PC material for plastic parts and excellent steel for the external fasteners

SJ-ABS-03  Fiber Optic Splice Closure, Fiber Optic Closure,  Cable Optic Joint Box Fiber splice closures are used throughout the network, including the fiber trunk, feeder, distribution, and last mile segments. When splicing fiber in the outside plant, your closures need to be: Easily accessible for maintenance, changes, and expansion Protected against water ingress and harsh conditions Suitable for a variety of applications and environments including aerial, pedestal, buried, or underground Compatible with existing cable types It ensures long-term reliability and usage under ambient temperature from -40℃ to +75℃ Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way Dimension (CM): 46.7*18*12CM Cables Entry & Exit:4Entry 4Entry Cable Diameter (mm): Φ7-Φ16 Sealing Structure : Silicon gum material Sealing Material: ABS or PC Maximum capacity: Bunchy 12-144cores ; Ribbon:288 cores Ningbo Sijee Optical Communication Technology Co., Ltd was established in 2002, our companyhas a talented and professional team engaging in sheet metal casecabinet processing, urban facilities, communication equipment research and development, design, manufacture and sales. Ningbo Sijee,  as a relatively large domestic telecommunications equipment and distribution products and plate metal case  cabinet suppliers, focuses on providing service to domestic and foreign operators, large domestic

GJS-24  Horizontal type Fiber Optic Splice Closure with 2 inletsoutlets, Fiber Optic Cable Junction Box, Cable Optic Joint Box Horizontal (inline) fiber optic splice closures are made of excellent engineering plastics. Sijee supply different ports types, fittings and different fiber optic core numbers for horizontal fiber optic splice closures. Sijee's Splice Closure is suitable for protecting optical fiber splices in straight through and branching applications, and can be used in aerial, duct and direct buried fiber optic cable projects. Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way Dimension (CM): 58*19*14CM  Cables Entry & Exit:2Entry 2Exit Cable Diameter (mm): Φ7-Φ30 Sealing Structure : Sticky cincture Sealing Material: PC Maximum capacity: Bunchy 12-144cores ; Ribbon:288 cores It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network Ningbo Sijee Optical Communication Technology Co., Ltd was established in 2002, our company has been operating for 15 years with the registration fee of 50 million RMB. The company is located in Ningbo, the exact address is No.20 Chuangxin East Road, Liyang Town, Ninghai, Ningbo, Zhejiang,  with the factory area of more than 28, 000 square meters. The company's products has passed the ISO9001 international quality system certification, GBT24001-ISO14001 standards and GBT28001-2001 standards

GJS-24-D Large Waterproof Fiber Optic Splice Case  Horizontal type Fiber Optic Splice Closure with 3 inletsoutlets, Fiber Joint Closure, Fiber Splice Enclosures, Fiber Splice Closures, Fiber Splice Enclosure Outside Plant Direct Burial Closure offers the perfect choice for huge fiber count distribution applications involving butt and inline installations. The compact size and rugged design allow the closure to be applied in below grade, aerial and buried installations. This product can be applied in the straight line and branch line connections of optical cables within the diameter of 22mm(φ), all types and structures, overhead pipeline underground well installation. Meanwhile, it is also applied to the connection of all-plastic city phone cables. All property indexes are in accordance with National YDT814-1996 Standard.  The body is made from imported high-intensity engineering plastics(ABS) and formed the shape with mould plastics under high pressure. It is in the shape of HALF rectangle, with the advantages of less weight, high mechanical intensity, corrosive-resistance, anti-thunderstruck and long service life. The body and cable entrance are sealed with adhesive rubber strip(non-vulcanized) and sealed tape. Reliable sealing capability. It can be re-opened and easy to maintain.  Overlapping fiber-melting tray and separate insulation earth unit make the disposition of the cores, expanding the capacity and cable-earthen flexible, convenient and safe.

GJS-24-8  Extra Large 288-576 coresHorizontal type Fiber Optic Splice Closure with 4 inletsoutlets , Optical Fiber Cable Joint Closure, fiber optic splice box Fiber optic closure is a passive component which can provide a great protection for fiber splicingpoint. Aerially assembling, pipeline assembling and buried underground are all available. The Inland type closure is also called Horizontal closure. The input and output are on the both sides. Inland closure is more suitable for backbone application. Sijee provides various shapes closure of Inland type. All the closures we offered are with a great sealing performance. High quality ABS material also ensures the durability whether the closure is in air, in pipeline or buried underground. It ensures long-term reliability and usage under ambient temperature from -40℃ to +75℃ Dimension (CM): 58*25.5*14CM  Cables Entry & Exit:4Entry4Exit Cable Diameter (mm): Φ7-Φ30 Sealing Structure : Sticky cincture Sealing Material: PC Maximum capacity: Bunchy 12-288cores ; Ribbon:576 cores

GJS-24-D(PLC) Splitter Fiber Distribution Closure is a compact and flexible closure that provides for connections between fiber optic cables and passive optical splitters in the inside Plant. The closure can be mounted to support aerial applications. It offers a robust, user-friendly, and cost effective solution for connecting feeder and distribution cables via optical splitters in FTTP networks and is distinctive for such applications as rural and brownfield deployments. The closure casing is made of quality engineering plastics, and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as pleasing appearance. The mechanical structure is reliable and has the performance of resisting wild environment. Chemical and mechanical resistance for all the aerial application areas in the fiber networks. Cover most of the applications in the premise wiring networks like Fiber To The Home (FTTH) Closure adopts hingebuckle mechanism which makes dismantlingassembling easy. Convenient attachable splitter module with 1:32 splitter module & 1:16 splitter module for cable installation. Re-useable grommet sealing open and close easily for adding or removing drop cables providing efficient cable installation with no mess . Support PLC splitter Supplitter types supported:1×16, 1×32, 2×32, dual 1×16, dual 1×8, dual 1×4, dual 1×2 Splitters are easy to insert and remove without affecting splitter. size:580*255*140mm Ningbo Sijee Optical Communic

Sj-small compact type fiber optical splice closure box,  fiber splice enclosure, wall mount fiber optic distribution box, fiber optic terminal box 1.the parts of splice tray a.splice module with 4 cable ties 2.4 x 92mm b.splice organizer c.box size:230×185×85mm l×w×d   2.installation procedure: 2.1 cable preparation (1)cable sequentially through sealing nut, sealing claws, seal and through the closure bottom case, allow appropriate fiber lengths for placement within the splice tray. (2)tighten the sealing nut, and then proceed with stripping of fiber cable inside the closure bottom case. (3)repeat steps(1)and(2)until cable preparation is complete. 2.2cable fixation (1)loosen the sealing nut, adjust cable to the appropriate length, and tighten the sealing nut to fix cable in place. (2)repeat step(1)for rest of the cable to complete this procedure. *caution:(1)for non-functional entrance ports, brown solid plugs provided are to be used with the sealing assembly to ensure a good seal.       (2)solid plugs should protrude the outer edge of the sealing nut by 1-3mm for a complete seal. 2.3 fiber placement and splicing (1) use cable ties to fix the fiber-containing pvc soft tubing onto the splice tray, and fix the splice organizer onto the splice tray. (2) place fiber within the splice tray, made sure fiber lengths are correct for splicing work and placement after splicing. (3)after each individual fiber pair is spliced, place the spl

SJ-Small-2 Compact Type Fiber Optical Splice Closure box,  Fiber Splice Enclosure, Wall mount Fiber Optic Distribution box, fiber optic terminal box Box Size:250×205×50mm L×W×D Fiber optic splice closures are widely apply for the connecting of optical cable.It Suitable for straight-through, diverging and connection of FTTH. FTTB all kinds of optical communication passive network.   Features:   Ageing resistance & ultraviolet radiation resistance  Advanced internal structure design  Easy and fast to fix fiber cable  Easy and fast to increase and reduce.  The closure is spacious enough for winding and storing fibers  Applications:  Used for direct transmission of outdoor cable in aerial,  duct and direct buried application  Used for branching connection and protect the joint Ningbo Sijee Optical Communication Technology Co., Ltd was established in 2002, our company Products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, Network Cabinet, ODF, fiber terminal box, Fiber Optic Patch Panel,  etc. Sijee Equipment Enclosure include: all kinds of Equipment Enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box, stainless steel enclosure, electronic equipment racks , metal cabinets, metal

GJS-25-7 Waterproof Dome Fiber Optical Splice Closure, Joint Box,  Fiber Dome Closure,  Fiber Dome Splice Closure Fiber Optic Splice Closures is used for protective connection of two or multiple optical cable and optic fiber distribution. It is one ofcommonlyused equipment of user access point.Used for the outdoor connection between optical distribution cable and optical inroom cable. Available for aerial, duct, direct buried application. Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way Weight: 6.5kg(Erect type)Material: PC Dimension (mm): 55*25CM (H*D) Cables Entry & Exit:1Entry  6Exit Cable Diameter (mm): Φ7-Φ31 Sealing Structure :Heat shrinkable Sealing Maximum capacity: Bunchy 12-192 cores ; Ribbon:288 cores   Components: Seal tape 1PC, Insulation tape  1PC, Nylon tie  4PCS, optical cable heat shrinkable sleeve 24PCS, mental hook 1SET, seal fittings 1PC umeral bar 1PC, retaining ring 6PCSEnvironmental temperature: -40℃ to +85℃  Atmospheric pressure: 70∽106KPa Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won`t attenuate during the FOSC installation operation period.

GJS-25 Waterproof  Heat Shrinkable Seal Dome Fiber Optical Splice Closure, Joint Box,  Fiber Dome Closure,  Fiber Dome Splice Closure   Fiber optical splice closure allows 6pcs or 5pcs cable port optional. The closure is an openable box which is made of high quality PC. The closure and the foundation plate are sealed with Silicon Gum Material which fixes tightly by hoop. And the sealing of cables use Shrinkable tube. The closure can be opened and used again, no need to change the sealing material after it be sealed. Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way Weight: 3kg(Erect type)Material: PC Dimension (mm): 51*22CM (H*D) Cables Entry & Exit:1Entry 4Exit Cable Diameter (mm): Φ7-Φ31 Sealing Structure : Heat shrinkable Sealing Maximum capacity: Bunchy 12-144 cores ; Ribbon:288 cores Ningbo Sijee Optical Communication Technology Co., Ltd was established in 2002, our company has been operating for 15 years with the registration fee of 50 million RMB. The company is located in Ningbo, the exact address is No.20 Chuangxin East Road, Liyang Town, Ninghai, Ningbo, Zhejiang,  with the factory area of more than 28, 000 square meters. The company's products has passed the ISO9001 international quality system certification, GBT24001-ISO14001 standards and GBT28001-2001 standards, the company has also established an environmental management system and occupational health

Gjs-25-6 waterproof  heat shrinkable seal dome fiber optical splice closure, joint box,  fiber dome closure,  fiber dome splice closure  fibre optic dome splice closures from sijee provide a reliable and effective means of sealing and protecting optical fibre splices. The heat shrinkable seal dome fiber optical splice closures are multi-purpose splice closures, suitable for both slotted-core cable and loose tube cable. This fibre optic splice closures are suitable for aerial, wall-mounting, pole-mounting and underground installations. In addition, this closure is also suitable for tap-out installation with maximum of up to 4 branching cables. Purpose: aerial, direct-burying, wall-mounting, pipeline laying way weight: 3kg(erect type)material: pc dimension (mm): 51*22cm (h*d) cables entry & exit:3entry 3exit cable diameter (mm): φ7-φ31 sealing structure : heat shrinkable sealing maximum capacity: bunchy 12-144 cores ; ribbon:288 cores components: seal tape 1pc, insulation tape  1pc, nylon tie  4pcs, optical cable heat shrinkable sleeve 24pcs, mental hook 1set, seal fittings 1pc umeral bar 1pc, retaining ring 6pcs ningbo sijee optical communication technology co., ltd was established in 2002, the company has a talented and professional team engaging in sheet metal casecabinet processing, urban facilities, communication equipment research and development.

SJ-D-S-2   Waterproof  Heat Shrinkable Seal Dome Fiber Optical Splice Closure, Joint Box,  Fiber Dome Closure,  Fiber Dome Splice Closure  Fibre optic dome splice closures from Sijee  allows 2 cables in and 2 cables out. It accommodates the splicing and branching of the cable which is used in aerial-hanger, wall-mounting or direct buried. The Closure is an openable box which is made from high-quality PC. The closure and the foundation plate are sealed with Silicon Gum Material which fixes tightly by hoop. And the sealing of cables also uses Silicon Gum Material. The Closure can be opened and used again, no need to change the sealing materials after it be sealed.  Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way Weight: 2.1kg(Erect type)Material: PC Dimension (mm): 46*16CM (H*D) Cables Entry & Exit:2Entry 2Exit Cable Diameter (mm): Φ7-Φ25 Sealing Structure : Heat shrinkable Sealing Maximum capacity: Bunchy 12-96 cores               Span-life: 30 years. It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network

SJ-D-S  Waterproof  Dome Fiber Optical Splice Closure, Joint Box,  Fiber Dome Closure,  Fiber Dome Splice Closure  Fibre optic dome splice closures from Sijee  allows 2 cables in and 2 cables out. It accommodates the splicing and branching of the cable which is used in aerial-hanger, wall-mounting or direct buried. The Closure is an openable box which is made from high-quality PC. The closure and the foundation plate are sealed with Silicon Gum Material which fixes tightly by hoop. And the sealing of cables also uses Silicon Gum Material. The Closure can be opened and used again, no need to change the sealing materials after it be sealed.  Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way Weight: 2.1kg(Erect type)Material: PC Dimension (mm): 43.5*16CM (H*D) Cables Entry & Exit:2Entry 2Exit Cable Diameter (mm): Φ7-Φ25 Sealing Structure : Mechanical Sealing Maximum capacity: Bunchy 12-96 cores ; Ribbon:182 cores Components: Seal tape 1PC, Insulation tape  1PC, Nylon tie  4PCS, optical cable heat shrinkable sleeve 24PCS, mental hook 1SET, seal fittings 1PC umeral bar 1PC, retaining ring 6PCSEnvironmental temperature: -40℃ to +85℃  Atmospheric pressure: 70∽106KPa Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won`t attenuate during the FOSC installation operation period. Seal Performance: After the closures are seal

SJ-D-1 Small  Waterproof  Dome Fiber Optical Splice Closure, Joint Box,  Fiber Dome Closure,  Fiber Dome Splice Closure  Fiber splice closure is the equipment used to offer room to fuse splice optical fiber and also to provide protections for the fused fiber joint point and the fiber cables. Typical fiber optic splice closure and vertical type and horizontal type, there are various kinds of fiber splice closures suit for different applications, such as aerial, duct fiber cables and direct buried. Generally, fiber optic splice closures are used outdoors, some even used underwater. Vertical type of fiber optic splice closure looks like a dome, thus they are also called dome type. They meed the same specification as the horizontal types. They are designed for buried applications. The Closure can be opened and used again, no need to change the sealing materials after it be sealed.  Purpose: aerial, wall-mounting, Pipeline laying wayexternal dimensions:330mm*120mm (Erect type) Weight: 0.7kg(Erect type) Material: ABSPC Maximum capacity:48cores Environmental temperature: -40℃ to +85℃  Atmospheric pressure: 70∽106KPa

SJ-ODB-M12 Wall Mounted Outdoor FTTH Splitter Fiber Distribution Cabinet 48 Cores, FTTH Distribution Box, FTTH Optic Terminal CabinetFiber optics distribution cabinet are currently being widely used for distributing outdoor optical cable in indoor and outdoor conditions. This cabinet is very suitable for FTTx uses and cross-connecting outdoor optical cables. terminal box terminates up to 2 fiber optic cables, offers spaces for splitters and allocates 48 SC adapters and working under both indoor and outdoor environments. It is a perfect cost-effective solution-provider in the FTTx networks.Features:Metal material for the max strength.Easy installations: Ready for wall mount – installation kits provided.Ready for splitters: designed space for adding rack type splitters. Space saving! Double-layer design for easier installation and maintenance.Upper layer for splitters and distribution.Lower layer for splicing.Cable fixing units provided for fixing the outdoor optical cable.Accommodates both cable glands as well as tie-wraps.Lock provided for extra security. Sijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure, fiber optical distribution box, Network Cabinet, ODF, fiber terminal box, Fiber Optic Patch Panel, etc.Sijee Equipment Enclosure include: all kinds of Equipment Enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box, stainless steel enclosure, electronic equipment racks , metal cab

SJ-FTTH-LM-4 Wall Mounted Terminal Box 4 ports  Fiber Optic Socket Description: FTTH Terminal Box FTTH Fiber Optic Socket Face plate applies inner clip design and is designed for FTTH,  FTTO and FTTD  application. It is used for protecting connection of cables, pigtails and adapters.   Features: 1. Light and compact 2. Easy operation by inner clip design  3.With protective doors, dustproof 4.Adapter slots adopted - No screws needed for installing adapters. 5.Double-layer design for easier installation and maintenance6.Upper layer for splicing7.Lower layer for distribution8.Cable fixing units provided for fixing the outdoor optical cable9.Accommodates both cable glands as well as tie-wraps10.Fully stable patch panel, no risk of movement11.Protected patch panel offers secure environment for adapters, patch cords and pigtails.    Applications: 1. Wall mounting installation 2. Match with other A86 panel in house.In FTTO, fiber socket can installed in wall, on desk. 3.Optical fiber communication system 4.Fiber optic CATV, FTTH Fiber to the house 5.Optical fiber  access network 6.Testing instruments, fiber optical sensors 7.Fiber optic patch panels, cabinets type or wall-mounted type fiber optic distribution units.   Suitable for three splice way: pigtail + Mechanical Splicer+ Adapter pigtail + fused splicer + Adapter fast installation connector + Adapter P

SJ-FTTH-SK-1 2 Ports Indoor Fiber Distribution Box Optic Socket Description: The terminal box socket panel are used in the end termination of residential buildings  and villas or business applications;It can fix and splice with pigtails, max hold 4 pcs SC adapters,  it may Adaptability of optical connection styles and the optical fiber can be managed effectively and quickly installed within an office, house or communication room environment.   Advantage: Economic design;Ability to allow cables to enter from both sides of the unit;Removable cover for easy access;compact, low profile,  wall mounted unit used for small and large business  premise Technical Data: 1. Number of input cable ports:2 2. Maximum input cable diameter(mm):3.0mm*2.0mm rubber fiber cable Maximum Capacity: 4 fibers with LC Duplex Adapters 2 fibers with SC Simplex Adapters 3. Maximum no. of customer feeds: 2 patch cords 4. Dimension: 130 x 83 x 25mm  5. FTTH drop cable

Sj-ofoc-03 outdoor high reliability outdoor integration cabinet equipment enclosure equipment cabinet wall mounting enclosure reliable in performance and convenient to move. the outdoor-street mountable enclosure provide environmental and mechanical protection for passive optical elements and active transmission equipment. The cabinet contains internal mounting rails, which allow installation of standard 19" equipment. Advantages and characteristics1.wide working temperature range:-10--+45°c( southerntype), -40--+45°c(northern type)2.easy maintenance: completely front-side operation andmaintenance3.easy to install: suitable for the ground, platform ofroof, the tower platform etc4. protection level: ip65 , effectively separated fromexternal factor, guarantee equipment can operate reliably5. intelligent ventilation system: effectively reduce thesystem consumption6. security design: with the intelligent entrance guard material:   box & door : sheet steel 1.2mm-1.5mm mounting plate: zinc-coated plate 1.5mm-2.0mm surface treatment:  phosphating, electrostatic powder spraying in orange-peel or plain finish color:color can be customized according to customer requirement. Supply includes:  box of all-round, single door for width

Sj-odf-96 96 ports rack mount optical distribution frame 96cores splice and distribution uniteach unit accommodates 8 pieces of 12-core integrated splice and distribution module with a capacity of 96 cores.reliable position and limit device is provided for the module in the unit. The module can be removed out of unit for easy operation and maintenance.distinct fiber number label is provided.unit design without unit door.one worktable is provided if one unit reaches 8 pieces of 12-core integrated modules for splice and distribution.removable fiber separation hook is provided for integrated module for user to select. Specification:  model no.:sj-odf-96 dimension(hxwxd)mm:225x485x345 capacity:96 fibers comments: 1. Overall dimension could be custom made by requirement. 2. Configuration of box can be customized according to customer requirement. View of product: more product: sheet metal workshop: certification: you are manufacturer or trading company? we are 15-year-experience manufacturer of sheet metal fabrication, handle almost anything from metal. You can get quotation of direct factory which give you advantage in target market. What is the lead time for prototype? do you help repairing the parts of the nonconforming sample? normally 5 days for prototyping, and we help with sample repairing.if sample is non-conformity, we can also make second sample for free to improve the quality, client just need to pay the freight. You factory is a huge one?

Sj-nc-1  19" rack universal server rack network cabinet this network cabinet is widely used for 19 inch network server enclosure perferated cabinet  installing and placing of 19" international standard equipment and the system integration;    the product conforms to ansieia, rs-310-d, iec297-2, din41491:part1, din41494:part7 and gbt3047.2-92 standards and provides reliable installation, support, power supply and ventilation device and effectively protect system equipment. Specification: product name :network cabinet (1) brand name : sijee or oem (2)product specification: height:18u-47u width: 600mm,  800mm depth:600mm, 800mm, 900mm, 1000mm, 1200mm (3) certification :iso9001, tlc,  ohsas 18001,  iso 14001 (4)cabinet standard :19'' inch inner installation (5)material :high quality spcc cold rolled steel t:1.2-2.0mmenclosure: 5-fold profiled sheet steel 1.5mmdoor plate: sheet steel 2.0mmrear plate: sheet steel 1.5mmmounting plate: zinc-plate 2.0mm-3.0mm (6)place of origin :ningbo or shanghai china (mainland) (7)color :black,  white or grey (special color on request) (8)moq:1piece (9)loading capacity:800kgs (10)installation :19'' inch inner installation

SJ-NC-2  19"Free standing network server data cabinet Network Cabinets support large, modular network switches by providing additional space for cable management and side-to-side airflow solutions.  Network Cabinets Feature:Wider cabinet footprint with additional interior space along both sides for cable managementEasy access to cables and equipment with removable doors and side panelsOptional front and rear cable management with cable guides that organize cables by U spacePerforated front and rear doors for optimal airflowLocking side panels and doors for equipment securityUp to 3000 lb (1360 kg) static load rating to support multiple network switches Specification: Product name :Network cabinet (1) Brand name : Sijee or OEM (2)Product specification: Height:18U-47U Width: 600mm,  800mm Depth:600mm, 800mm, 900mm, 1000mm, 1200mm (3) Certification :ISO9001, TLC,  OHSAS 18001,  ISO 14001 (4)Cabinet standard :19'' inch inner installation (5)Material :High quality SPCC cold rolled steel T:1.2-2.0mmEnclosure: 5-fold profiled sheet steel 1.5mmDoor Plate: sheet steel 2.0mmRear Plate: sheet steel 1.5mmMounting plate: Zinc-plate 2.0mm-3.0mm (6)Place of origin :Ningbo or Shanghai China (mainland) (7)Color :Black,  White

SJ-NC-3  Server Rack 19 Inch Network Cabinet With Doors This network cabinet is widely used for installing and placing of 19" international standard equipment and the system integration;The product conforms to ANSIEIA, RS-310-D, IEC297-2, DIN41491:PART1, DIN41494:PART7 and GBT3047.2-92 standards and provides reliable installation, support, power supply and ventilation device and effectively protect system equipment. Product Features:1.Adopts good-quality steel plate, strongly rigid; surface decreasing, anti-rust phosphorescence, plastic-spray treatment,  thus having a beautiful appearance.2.All options adopt 19" standard installation, suitable for 19" standard rack, equipment cabinet of metric and ETIS standards, etc.3.Complete in types and specifications; various customized cabinets are available upon request;  4.Related routing holes reserved on the upper and lower covers for free cabling; 5.Sufficient routing space in the cabinet with routes designed on all sides;6.Side door detachable and professional components for cabinet combining;7.Safe and reliable ground protection;8.Protection grade: IP20.Standards Conformed to:GBT3047.2-92 StandardsANSIEIA;RS-310-DIEC297-2DIN41491:PART1DIN41494:PART7 Specification: Product name :Network cabinet (1) Brand name : Sijee or OEM (2)Product specification: Height:18U-47U Width: 600mm,  800mm Depth:600mm, 800mm, 900mm, 1000mm, 1200mm (3) Cer

SJ-NC-4 8U-47U 19" Standard Floor Standing  Network Cabinet For Telecommunication, Rack Enclosure Cabinets Cabinets can be fitted with a range of options including side panels, solid steel doors, vented glazed doors and vented steel doors all designed to offer the flexibility to meet everyday requirements. NetworkingCablingBroadcast 19" Electronic Equipment Housing Communication Systems IT Systems Enclosed glass front door with slam latch lock Lockable rear metal door with low level venting Vented and lockable side panels Raised and vented top cover with cable entry Transport castors Open base design Vertical cable management (800mm wide only) Fully adjustable 19" mounting profiles Earth bonding kit Full range of complenting accessories Supplied assembled or in flat pack option Multiple door configurations available Configurable roof options to cater for overhead cable installations Full range of airflow management accessories Specification: Product name :Network cabinet (1) Brand name : Sijee or OEM (2)Product specification: Height:18U-47U Width: 600mm,  800mm Depth:600mm, 800mm, 900mm, 1000mm, 1200mm (3) Certification :ISO9001, TLC,  OHSAS 18001,  ISO 14001 (4)Cabinet standard :19'' inch inner installation (5)Material :High quality SPCC cold rolled

SJ-NC-5 19" Server Rack used network Cabinet  General description of 19 Inch network cabinet with doors  1.Classic model, disassembled structure, can be flat packing and easy to transport;  2.Tempered glass front door with advanced spring lock. , Steel rear door with small round lock;  3.Removable side panel with latches, easy to install, optional lock;  4.Cable entry on the top and bottom;easy to manager cable  5.Adjustable feet and castors are available simultaneously;  6.S-shaped mounting profile, free to move forward and back;  7.Various optional accessories for common using; Specification: Product name :Network cabinet (1) Brand name : Sijee or OEM (2)Product specification: Height:18U-47U Width: 600mm,  800mm Depth:600mm, 800mm, 900mm, 1000mm, 1200mm (3) Certification :ISO9001, TLC,  OHSAS 18001,  ISO 14001 (4)Cabinet standard :19'' inch inner installation (5)Material :High quality SPCC cold rolled steel T:1.2-2.0mmEnclosure: 5-fold profiled sheet steel 1.5mmDoor Plate: sheet steel 2.0mmRear Plate: sheet steel 1.5mmMounting plate: Zinc-plate 2.0mm-3.0mm (6)Place of origin :Ningbo or Shanghai China (mainland) (7)Color :Black,  White or Grey (Special Color

Sj-nc-6 telecom indoor floor standing network rack cabinet cabinet application:the standing network cabinet is a cost effective cabinet that can be installed in equipment rooms or in office environments where aesthetics are important.the frame made from comes with steel side, top and rear door plus a toughened glass front door, tow pairs of shelf rails are provided for mounting shelves and other accessories in the 600mm800mm and 960mm deep cabinets.19-inch telecommunication and data racks designed for installing patch panels, active components for lan construction, modems, industry-controlling devices, stage lighting control, and monitor equipments.unassembled rack is equipped with 2 pairs of 19-inch movable vertical extrusions, one pair of side panels with quick release locking fastener, tempered glass front, door with lock, rear metal door with lock.increase operation reliability for inside equipments, strong structure with maximum static load more 500kg.several lockable cable entrances on the top bottom plate.cabinet information :spcc high-quality cold roll steel. And its thickness: mounting rails 2.0 mm, others 1.2 mm.surface treatment: degreasing, rustproof, phosphoric spraying.steel frame. Range of medium duty cabinets of durable modular construction.tempered glass front door and rear door accelerate the convection inside enclosure. With tempered glass locking doors section doors, enable ventilation and reliable operation.removable side panels, leveling feet.

Sj-nc-7 19" network cabinet telecom indoor floor standing network rack cabinet application:the racks are used to store computer and related control equipment, can provide the protection of storage equipment, electromagnetic interference shielding, arranging equipments orderly and neatly and maintaining equipments conveniently .cabinets generally divided into standing server rack network cabinet, wall mounted racks, console cabinets etc.cabinet commonly used in network wiring closets, floor layout, center machine room, data room, control center, control room, the monitoring center etc.server cabinet feature:1.comply with ansieiars-310-d, din41491;part1, iec297-2, din41494; part7, gbt3047.2-92 standard; compatible with 19" international standard, metric system and eisi standard.2. Reliable structure with solid welded frame, maximum static loading capacity:80kg(optional castors and plinth).3.popular smoky grey color tempered glass front door, high density vented arc hole front & rear door, excellent and elegant exterior design; the turning angle of front door is above 90 degree, easily assembled, operated and maintained.4.optional cable entry with dust-proof on top cover and bottom panel, removable front& rear door and side panel facility, top fan and air intake around cabinet help exhaust hot-air5. Surface finish: degreasing, pickling, rust phosphoric, static electricity plastic power coated.6. All material are high-quality spcc cold rolled steel; thickness :square.

Sj-nc-8  floor standing network server data rack enclosure cabinet rack enclosure solution designed to address current it market trends for high-density server and networking applications. With a strong focus on cooling, power distribution, cable management, and environmental monitoring, the enclosure provides a reliable rack-mounting environment for mission-critical equipment. Specification: product name :network cabinet (1) brand name : sijee or oem (2)product specification: height:18u-47u width: 600mm,  800mm depth:600mm, 800mm, 900mm, 1000mm, 1200mm (3) certification :iso9001, tlc,  ohsas 18001,  iso 14001 (4)cabinet standard :19'' inch inner installation (5)material :high quality spcc cold rolled steel t:1.2-2.0mmenclosure: 5-fold profiled sheet steel 1.5mmdoor plate: sheet steel 2.0mmrear plate: sheet steel 1.5mmmounting plate: zinc-plate 2.0mm-3.0mm (6)place of origin :ningbo or shanghai china (mainland) (7)color :black,  white or grey (special color on request) (8)moq:1piece (9)loading capacity:800kgs (10)installation :19'' inch inner installation (11)surface treatment :box & door: phosphating,  electrostatic powder&nbs.

SJ-ONC-2 Outdoor Integrated Telecom Cabinet  Broadband Outdoor Cabinet,  Outdoor Network and Rack Cabinet Outdoor Integrated Telecom Cabinet works as a small Outdoor Integrated Base Station Cabinet. It is mainly used in wireless communication base station, such as 3G system, communication or network integrated service, access or transmission switching station, emergency communication or transmission, etc. The cabinet is made of galvanized steel. The cabinet has roofs which are sun proof and water proof. The cabinet door uses embedded structure. The door opening angle is larger than 110° and the door limit device can limit the opening angle. The lock is theft-proof three point lock. There`s open door alarm sensor, which works together with the environment monitoring unit. Features: (1)The cabinet is dustproof, sunproof and rainproof, which is used in outdoor environment. The protection level is IP55.(2)Three cooling options for the cabinet: fans, heat exchanger or air conditioner.(3)-48V lamp is installed inside the cabinet.(4)Optional Accessories: Environment Monitoring Unit, door alarm, temperature and humidity sensor, smoke sensor, water sensor, PDU etc.(5)The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding. There`re entrance holes individually for power cable, signal cable and optical cable.(6)All the cables used in the cabinet are made from flame retardant materials.

SJ-OFOC-OTC 19 Inches Rack Outdoor Telecom Cabinet Base Station Enclosure Telecom Equipment Racks Telecom Cabinets Outdoor , Telecom Outdoor Enclosures , Rack Outdoor Telecom , Outdoor Telecom Rack Enclosure High reliability, maintenance-free, fast assembly, suitable for harsh environment High integration, small footprint, short construction period, reduce the construction cost Improved thermal design, efficient energy saving, effectively extending the battery life Support for fast assembly, ready for the summit, multi-scene roof installation Material: Box & Door : sheet steel 1.2mm-1.5mm Mounting plate: Zinc-coated plate 1.5mm-2.0mm Surface Treatment: Phosphating, Electrostatic powder spraying in orange-peel or plain finish Color:Color can be customized according to customer requirement. Supply includes: Box of all-round, Single door for Width

SJ-FTTH-SS-1 1core FTTH Mini Fiber Optic Terminal Box, Termination Box, Fiber Distribution Box  FTTH Socket Panel Description: The indoor terminal is applied in the FTTX network to connect the drop cable and ONU devices through fiber port.The capacity arrange from 1 core to 4 core, with splicing, mechanical connection, wall mounted installation. Application Widely used in FTTH access network.Telecommunication CATV NetworksData Communication Networks Feature Excellent  design, graceful appearance and convenience operation Plug fiber without having to open the shell, easily accessible fiber operation Vertically downward port to avoid causing personal injuryWhite color, graceful style and good adaptability to environment.Fiber cable inlets in every direction, supports the cable inlets for different scenarios. Friendly operation interface, high reliability Introductions clear, effectively prevent the miss-operation. Low construction cost The FSijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, Network Cabinet, ODF, fiber terminal box, Fiber Optic Patch Panel,  etc. Sijee Equipment Enclosure include: all kinds of Equipment Enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box, stainless steel enclosure, electronic equipment racks , metal cabinets, metal enclosure CATV enclosure, etc

2 Port Fiber Optic Termination Box With Dust Cover, 2 port Fiber Optic Socket Products:2 Port Fiber Optic Termination Box With Dust Cover Warranty:5 Years Fiber:G652D, G657A1or Others Cable Size:0.9mm, 2.0mm or 3.0mm Fiber Core:Simplex, Duplex, or Multi Core Connector:SCLCSTFCMPOMU Length:12345678910 or Others  The characteristics of the product: 1. Multifunctional optical fiber terminal box can meet box multipurpose, insert a variety of cable by so many ways, and firmly fixed the aura and cable. Even pull off force is above 50N, The cable can fasten safety, will not damage to the fiber, also no extra insertion loss.  2. Multifunctional optical fiber terminal box can achieve: FTTH simplex drop cable of the outside and inside wall can in but one port out. Double core cable access dual output, outdoor cable connection Into the port output, outdoor cable access multi fiber output, outdoor cable access multi line output, Application of multiple occasions demand environment. 3.Multifunctional optical fiber terminal box  has the advantages of simple operation, easy to use. 4.Cable Manager in Multifunctional optical fiber terminal box is big arc which can protect the fiber cable under the external force Under the external force does not produce damage, affect the quality of communication  Features Applicable for FTTH, FTTO an FTTD, etc., and allows easy use in different installation environments.

Sj-otb-sz-01 wall mounted fiber optical terminal box sc 6 cores optical terminal box (otb) is mainly used for connecting the indoor optical cables, optical patch cords and optical pigtails. it can be wall mounted, facilitates the test and refit of the lines. Usage and properties:    a) suitable for the protective connection between cables and pigtails    b) suitable for the connection between optical cables and optical communication device    c) small volume, unique structure, easy installation, for indoor use the fsijee telecom communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, network cabinet, odf, fiber terminal box, fiber optic patch panel,  etc. Sijee equipment enclosure include: all kinds of equipment enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box, stainless steel enclosure, electronic equipment racks , metal cabinets, metal enclosure catv enclosure, etc specification: name:ftth wall mounted fiber optical terminal box model no.:sj-otb-sz02 dimension(hxwxd)mm:300x135x55 capacity:12ports for scfc material:abs installation:wall mounting color:white use:widely used in ftth access network, telecommunication networks. Sample:free sample available. Delivery time:it dependent on the quantity of your order. Normally 10-18 day.

SJ-OTB-SZ-03 Wall Mounted Fiber Optical Terminal Box SC 24 Cores Fiber termination box (FTB), also called optical termination box (OTB) is a small size and compact fiber management product used in FTTx (Fiber to the x, including FTTH, FTTB etc., ) cabling-fiber cabling and cable management. In some cases, fiber termination box can be regarded as the mini size of fiber optic patch panel and ODF. The wall mount fiber termination boxes are designed for either preconnectorized cables, field installation of connectors, or field splicing of pigtails. They are ideal for building entrance terminals, telecommunication closets, main cross connects, computer rooms and other controlled environments. The FSijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, Network Cabinet, ODF, fiber terminal box, Fiber Optic Patch Panel,  etc. Sijee Equipment Enclosure include: all kinds of Equipment Enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box, stainless steel enclosure, electronic equipment racks , metal cabinets, metal enclosure CATV enclosure, etc Specification: Name:FTTH Wall Mounted Fiber Optical Terminal Box Model NO.:SJ-OTB-SZ03 Dimension(HxWxD)mm: 300X170X70 Capacity:24 ports for SCFC Material:ABS Installation:Wall Mounting Color:white Use:Widely used in FTTH access network, Telecommunication Networks.

SJ-OTB-SZ-04 Wall Mounted Fiber Optical Terminal Box 12 Cores Pigtail type indoor fiber optic termination box   is laying the cable terminal to protect cables and pigtail splice, mainly for indoor fiber optic cable in through and branch connection and cable ends fixed and play a role of pigtails storage and connector protection. 1.Less weight, high strength, epoxy-static spray, beautiful appearance, easy to use. 2.splice tray using overlay structure and flexible configuration, can be removed to table for splicing , convenient operation and maintenance. 3.Cable fixtures splice tray and over-clamp, and a reliable grounding device owing cable fixing and splicing functions in OTB realize connection between pigtail and optical cable. Optical terminal box is mainly to connect two cables.OTB is a place of cable ends access, then connect optical switch through an optical cord.Therefore, OTB is usually installed in a 19-inch rack mount that can accommodate the number of fiber cable ends more. 1 Unscrew the screws above, open the cover2.set aside to a place for fiber optic cable splicing, fix wire of cable on the front end bracket, then fix cable to input port. 3.Peel cable, then use heat shrink tube to splice pigtail fixed to the splice tray 4 Close the cover and tighten the screws. The FSijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, Network Cabin

Sj-odbb-11 smc 12 cores wall mounted fiber optical terminal box  smc fiber optic distribution box , fiber splitter box is used as a termination point for the feeder cable to connect with drop cable. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the fttx network building. Material: smc, wet-proof, water-proof, dust-proof, anti-aging, protection grade is ip65. Small volume, for indoor, outdoor application. Compact structure, convenient installation and maintenance,  main feature: the material is smc. It is a series of products designed for ftth. Equipped with reliable fiber optic cable, soft cable fixed device , optical fiber splice protection device and blade-style optical splitter device.  to achieve the feeder cable and branch cable in the reserved node, direct and allocation, scheduling for fiber. Installation method: outdoor wall-mounted, pole-mounted. It is allowed to install the blade-style optical splitter and matched adapters. It is widely in use, simple in structure and easy in operation. The fsijee telecom communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, network cabinet, odf, fiber terminal box, fiber optic patch panel,  etc. Sijee equipment enclosure include: all kinds of equipment enclosure, wall mounting enclosure, junction box, network box, electrica.

SJ-ODBB-12 SMC 24 Cores Outdoor Fiber Optical Cable Distribution Box Optic fiber cable distribution boxes is applicable PLC coupler to a terminal access links FTTH access system. It is especially for connecting and protection for fiber cable of FTTH. This terminal box applies to the communications room and various network room wall installation or desktop installation.Feature:The design of the two-tier structure, the upper wiring layer optical splitter, lower for fiber splicing layer;Optical splitter module drawer modular design with a high degree of interchangeability and versatility;The fiber optic cable to enter the number of: 1 x 2 root (lower into the cable); The FTTH fibers enter the number of: 8 x 4 root (under into the fiber);1 SC or FC panels and each panel can hold 12 adapters;Box made of SMC material.General :Relative Humidity: ≤95%(+40°C);Operating Temperature: -40°C~+60°C;Dimension: 340mmx 230mmx90mmApplication:Installation: Wal mounting, Pole mounting The FSijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, Network Cabinet, ODF, fiber terminal box, Fiber Optic Patch Panel,  etc. Sijee Equipment Enclosure include: all kinds of Equipment Enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box, stainless steel enclosure, electronic equipment racks , metal cabinets, metal enclosure CATV enclosure, etc

SJ-ODF-04 Fiber Optic Distribution Frame ODF  Optical fiber frame is medium equipment connecting outside optical cable and fusion and integration pallet device with the features as followings Electrolytic steel sheet with anti-static coating material appliedInsulation resistance protection for high-voltage up to 1000MΩ500V DCApplicable for ribbon and non-ribbon cable Full front cable access, operation for ODU capacity from 12, 24, 48, 72 and 96 cores equipped insideSize and specifications can be customized as per customers drawing and requestsThoughtful grounding protection device added Specification: Model NO.:SJ-ODF-04 Dimension(HxWxD)mm:2000X800X400 Capacity:576Fibers Comments: 1. Overall dimension could be custom made by requirement. 2. Configuration of Box can be customized according to customer requirement. View of product: More Product: Sheet Metal Workshop: Certification: You are manufacturer or trading company? We are 15-year-experience manufacturer of sheet metal fabrication, handle almost anything from metal. You can get quotation of direct factory which give you advantage in target market. What is the lead time for prototype? Do you help repairing the parts of the nonconforming sample? Normally 5 days for prototyping, and we help with sample repairing.If sample is non-conformity, we can also make second sample for free to improve the quality, client just need to pay the freight.

SJ-ODF-05 1440 Cores Indoor Fiber Optic Distribution Frame ODF  Optical distribution unit is fiber optic management unit primarily used indoor. They are used for the fiber optic cable backbones connection, termination and distribution. It is a common product in FTTx and fiber optic distribution systems.We supply a series of optical distribution frames from 12 fiber counts type to 144 fiber counts type. Fiber optic ODF has various individual distribution panels inside the closure, they are flexible to use like drawers. The optical distribution frame is with steel plates and aluminum alloy; the units can be with optional SC, FC, ST, LC adapters for fiber optic termination. They are convenient to use in fiber optic maintenance and supervising. Specification: Model NO.:SJ-ODF-05 Dimension(HxWxD)mm:2200X1400X300 Capacity:1440Fibers Comments: 1. Overall dimension could be custom made by requirement. 2. Configuration of Box can be customized according to customer requirement. View of product: More Product: Sheet Metal Workshop: Certification: You are manufacturer or trading company? We are 15-year-experience manufacturer of sheet metal fabrication, handle almost anything from metal. You can get quotation of direct factory which give you advantage in target market. What is the lead time for prototype? Do you help repairing the parts of the nonconforming sample? Normally 5 days for prototyping, and we help with sample repairing.If sample is non-conformity.

SJ-ODF-12 Fiber Optic Distribution Frame  ODF Box   ODF Unit is specially designed for optical fiber communication equipment room. It has the function of cable fixation, protecting fiber cable terminating, wiring, distribution and protection of fiber cores and pigtails.Metal plate unit box structure, beautiful appearance19"standard installation has good versatility.Complete modular design and front operation. The unit box integrates fiber fusion, splicing, wiring, distribution, into one every single splice tray can be pulled out separately, satisfying the operation in or out of the box. Specification: Model NO.:SJ-ODF-12 Dimension(HxWxD)mm:44.5X485X285 Capacity:12Fibers Comments: 1. Overall dimension could be custom made by requirement. 2. Configuration of Box can be customized according to customer requirement. View of product: More Product: Sheet Metal Workshop: Certification: You are manufacturer or trading company? We are 15-year-experience manufacturer of sheet metal fabrication, handle almost anything from metal. You can get quotation of direct factory which give you advantage in target market. What is the lead time for prototype? Do you help repairing the parts of the nonconforming sample? Normally 5 days for prototyping, and we help with sample repairing.If sample is non-conformity, we can also make second sample for free to improve the quality, client just need to pay the freight. You factory is a huge one? We have an area of 30000 square meters.

SJ-ODF-24 Fiber Optic Distribution Frame  ODF Box Rack-mount Fiber Optic Distribution Frame Rackmount Fiber Optic Distribution Frame is modulized design with drawabletrays inside and cold-rolled steel box. It could be pre-installed with various kinds of fiber optic adapters and pigtails. It is with standard 19 inch size and properly designed to control the bend radius of the cable inside the enclosure to avoid extra optical loss. This frame is ideal for indoor fiber optic cables connection storage,  distribution and management. Features: Standard size,  light weight and reasonable structure Splice tray inside changeable Can be used in 19'',  23'' standard distribution frame Suitable for ribbon and single fiber Various panel plate to fit different adapter interface  Front mark on the plate is easy for identification and operation 48C,  144C optional,  with or without fiber optic pigtails.

Sj-odb-sk07-b  ip65 waterproof outdoor fiber optic distribution joint box the equipment is used as a termination point for the feeder cable to connect with drop cable in fttx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the fttx network building. Shape:total enclosed structure, be in nice shape material characteristic: 1.wet-proof, water-proof, dust-proof, protection level up to ip65 2.construction-lightweight plastic offers strength 3.resistance to chemical and u.v attack 4.wall mounting or pole mounting features: 1.clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution..etc all in one.2.cable, pigtails, patch cords are running through own path without disturbing each other, cassette type sc adapter installation, easy maintenance.3.distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.4.cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.application:1. Widely used in ftth access network. 2.telecommunication networks 3.catv networks data communications networks 4.local area networks sijee telecom communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, network cabinet, odf, fiber.

Sj-odb-sk08  ftth splitter 1*16 fiber access termination box, optic access termination box,  fiber access terminal box  fiber access termination box is able to hold up to 8 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in fttx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box. Features water-proof design with ip-65 protection level. Integrated with splice cassette and cable management rods. Manage fibers in a reasonable fiber radius condition. Easy to maintain and extend the capacity. Fiber bend radius control more than 40mm. Suitable for the fusion splice or mechanical splice. 1*16 splitter can be installed as an option. Efficient cable management. 12 ports cable entrance for drop cable. Sijee telecom communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, network cabinet, odf, fiber terminal box, fiber optic patch panel,  etc. Sijee equipment enclosure include: all kinds of equipment enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box, stainless steel enclosure, electronic equipment racks , metal cabinets, metal enclosure catv enclosure, etc specification: name:plastic wall mounted optic distribution box model no.:sj-odb-sk08 dimension(hxwxd)mm:300x270x95

SJ-ODB-SK09 16Cores FTTH Fiber Distribution Box  FTTH optical distribution box can be installed with 16 Cores SC, FC, LC fiber optic adapter to fix and splice & fiber optic pigtails. there are various designs for 16 cores FTTH optical distribution box to fit the FTTH network cabling. FTTH16A 16 Cores Outdoor Indoor Fiber Optic Distribution Box also viewed as splitter distribution box is often used in the terminal link of FTTH access system, Especially suitable for pole and wall mounting application. In the optical fiber transmission network, splitter distribution box is the ideal equipment between optical node and terminal.With the functions of fiber storage, split, and distribution. It is divided outdoor type. Sub-fiber (splitting) box, divided into straight-acting, sub-fiber optical cable adapter box and cassette inserted chip sub-fiber splitter cable boxes. Case material quality cold-rolled steel, stainless steel or composite material. Mainly applied in the corridor or outdoor spectroscopic point FTTH access mode. Suitable for primary or secondary spectroscopic FTTH, the two spectral particularly evident advantages. And the introduction of fiber bypass connection function.Straight-acting small size, configuration and diverse, especially for the next level spectroscopic mode, placed in the corridor, weak wells and other occasions.Adapter-type sub-fiber boxes in addition to a distribution line function, also reserved the spectral function.

SJ-ODB-SQ10  1 input port 6 output ports FTTH Distribution Box, FTTH Drop Cable Optical Termination Box  FTTH Distribution Box is made of high quality engineering plastic, with beautiful and elegant appearance, it is usually installed at outdoor walls.The reasonable inner structure makes the operation and installation easy and convenient.The MAX capacity is 6, the splice tray adopt diversified structure, It can be used to install 1:4PLC dividers, or splice cable using the method of heated pipe, also can connect cable using the method of cold subgroups, The installation frame is at the bottom of the adapter, which makes the product beautiful and steady, and the application more flexible. Features: Waterproof, Anti-UV, Ultra violet resistant and rainfall resistant. Light weight, small space, small installation size, reliable sealing. Could be connected FTTH Drop cables inside. This box could be used for wall-mounted applications; Suit for Outdoor & Indoor. The base and cover of the box adopts [self-clip" &"screw-clip" two times lock method, which is better to use in outdoor for high sealing and waterproof.   Applications: Widely used in FTTH access network Telecommunication networks Data communications networks Local area networks CATV networks Sijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, Network Cabinet, ODF, fiber terminal box, Fiber Optic.

SJ-ODB-SQ11  Plastic FTTX IndoorOutdoor Fibre Optic Termination Boxes 8SC Splitter Type Distribution Box Drawer type and plug & play PLC spliiter cassette is used in the box and it give very convenient for operating by just plug in and draw out the containerized cassette splitter. The box inner space is divided into 2 parts, the base space is for loose tube cable storage and the tray is for fiber splicing, splitting and patching.  8SC outdoor distribution box with chassis optical  splitter,   Features  . Plug & play chassis PLC splitter 1x8  used, easy for opreating. . Rated to IP54, available able for indoor or outdoor application . Accepts standard SC connectors. . Fiber bend radius in the box is more than 30mm. . Individual reliable cable sheath and strengthen member fixing device. . Suitable for wall-mounted or pole-mounted. . Locked by key lock. Applications: FTTx, FTTH, FTTB, FTTO, Telecom network, CATV.Provide fusion and storage appliance for optical cables, for indoor fiber optic cable distribution. Sijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, Network Cabinet, ODF, fiber terminal box, Fiber Optic Patch Panel,  etc. Sijee Equipment Enclosure include: all kinds of Equipment Enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box, stainless steel enclosure, electronic equipment rack.

SJ-ODB-SQ12  Plastic FTTX IndoorOutdoor Fibre Optic Termination Boxes 8SC Distribution Box Drawer type and plug & play PLC spliiter cassette is used in the box and it give very convenient for operating by just plug in and draw out the containerized cassette splitter. The box inner space is divided into 2 parts, the base space is for loose tube cable storage and the tray is for fiber splicing, splitting and patching.  8SC outdoor distribution box with chassis optical  splitter,   Features  . Plug & play chassis PLC splitter 1x8  used, easy for opreating. . Rated to IP54, available able for indoor or outdoor application . Accepts standard SC connectors. . Fiber bend radius in the box is more than 30mm. . Individual reliable cable sheath and strengthen member fixing device. . Suitable for wall-mounted or pole-mounted. . Locked by key lock. Applications: FTTx, FTTH, FTTB, FTTO, Telecom network, CATV.Provide fusion and storage appliance for optical cables, for indoor fiber optic cable distribution. Sijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, Network Cabinet, ODF, fiber terminal box, Fiber Optic Patch Panel,  etc. Sijee Equipment Enclosure include: all kinds of Equipment Enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box, stainless steel enclosure, electronic equipment racks

SJ-ODB-SQ13   FTTX  Fiber Splitter Termination Boxes, 16 Ports Optical Fiber Terminal Box Fiber Optic Distribution BoxThis box is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.It intergtates fiber splicing. splitting. distribution. storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTx network building. Features1.Total enclosed structure, be in nice shape;2. Protects and manages cable effectively3. Secured with anti-theft locking mechanism4. Standard size, light weight5. Wall and pole mountable(accessories optional)6. Suitable for both outdoor and indoor use7. High quality PC +ABS material8. Good properties of dust, and moisture proofing, IP659. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution.etc all in one10. Suitable for SC and LC duplex adaptor and pigtail.  Sijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, Network Cabinet, ODF, fiber terminal box, Fiber Optic Patch Panel,  etc. Sijee Equipment Enclosure include: all kinds of Equipment Enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box, stainless steel enclosure, electronic equipment racks , metal cabinets, metal enclosure CATV enclosure, etc

SJ-ODB-SQ15   1*16 Splitter  FTTX Fiber Termination Box, Outdoor Fiber Optic Patch Panels  121624 Cores FTTXFTTH Optical Fiber Termination BoxThe equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.Features1. Total enclosed structure.2. Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP65.3. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.4. Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.5. Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.Specification1. Environmental requirement1) Working temperature:-40ºC~+85ºC2) Relative humidity:≤85%(+30ºC)3)  Atmospheric pressure:70KPa~106Kpa2. Main technical data sheet1) Insertion loss:≤0.2dB2) UPC return loss:≥50dB3) APC return loss:≥60dB4) Life of insertion and extraction:>1000 times3. Thunder-proof technical data sheet1) The grounding device is isolated with the cabinet, isolation resistance is less than2MΩ500V(DC);IR≥2MΩ500V2) The withstand voltage between grounding device and cabinet is no less than 3000V(DC)mi

SJ-ODB-SQ16   1*16 Splitter  FTTX Fiber Termination Box, Outdoor Fiber Optic Patch Panels  121624 Cores FTTXFTTH Optical Fiber Termination BoxThe equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.Optical Distribution Box (ODB) Series is a robust outdoor-rated closure designed for FTTH networks in sin­gle dwelling, multi-dwelling and multi-tenant applications, where it serves as a distribution box for up to 8 subscribers.Available in two sizes*, the ODB features an internal swing-out panel design with a rear splice area that accommodates a PLC splitter, 10 splices and excess fiber storage, and a front face with a removable adapter plate holding SC duplex or LC quad adapters. The ODB can be securely mounted to a sur­face with 4 screws, accessible only when the cover is open.Features1. Total enclosed structure.2. Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP65.3. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.4. Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.5. Cabinet can be installed by the way of wall-mounted or poled-mounted

SJ-FTTH-SK-16 FTTH Drop Cable type Fiber optic Splice & Splitter Closure Outdoor FTTH fiber optical terminal box FTTH Drop Cable type Fiber optic Splice & Splitter Closure features with ruggedness,  which is tested under harsh conditions and stand up to even the most severe conditions of moisture,  vibration and extreme temperature. Humanized design helps user get better experience and safer operating environment. Features Dis-mountable adapter panel Support mid-span termination Easy operation and installation Rota-table and dis-mountable splice tray for easy splicing Mechanical seal: Excellent sealing performance, reusable.   Specification: Model NO.:SJ-FTTH-SK-16 Dimension(HxWxD)mm:385X245X130 Capacity:24 Fibers Applicable PLC Splitter:1*16 PLC Splitter Cable ports:2 round ports Applicable Cable Diameter:8-17 mm Drop Cable ports:16 ports Applicable Cable Diameter:2*3 mm FTTH Drop Cable, 2*5 mm Outdoor Figure 8 FTTH Drop Cable Material:Modified Polymer Plastic Sealing Structure:Mechanical Sealing Weight:4.5KGS Installation:Wall mounting Pole mounting Protection grade:IP 68 Pla The FSijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure

SJ-OFOC-PON-1 FTTB Cabinet EPONGPON Broadband Data Integration Cabinet,  Floor Standing Electrical Enclosures ONU Cabinet Corridor Integrated Access Cabinet outdoor  Access Cabinet  Broadband Data Integration Cabinet is specifically designed for last sector of FTTH installation , the cabinet brings a flexible solution for safely containing optical converter, optical fiber terminal block and optical transmitter and other electronic equipments. Specification: Model NO.:SJ-OFOC-01 Dimension (H×W×D)MM:1200X600X600  Material:Cold-rolled Steel or Stainless Steel. Installation:Ground Mounted. Comments: 1. Overall dimension could be custom made by requirement. 2. Configuration of Box can be customized according to customer requirement. Access cabinet is normally installed in the corridor of living building, .It equips with a strong venting system inside, the hermetic shell is designed according to CE standard. The cabinet contains various of batteries, electric power and all kinds of electric equipment. It has capacious space to contain power area, distributing&splicing area and equipment area. The cabinet meets the requirements of IP65 protection level. Double-door design, convenient for installation&maintenanceAdopt 200L 110 High-frequency module, convenient for cable forming and maintenanceCapacious space for the installation of CATV equipmentFlexible configuration for clients' choices, simple operation and easy for maintenance.

SJ-OFOC-02 Outdoor Fiber Optic Enclosure Wall Mounting Enclosure   Material:  Box & Door : sheet steel 1.2mm-1.5mm Mounting plate: Zinc-coated plate 1.5mm-2.0mm Surface Treatment:  Phosphating, Electrostatic powder spraying in orange-peel or plain finish Color:Color can be customized according to customer requirement. Supply includes:  Box of all-round, Single door for Width

SJ-OFOC-ONU-2 Outdoor Broadband Access Integrated Distribution Cabinet,   Outdoor Waterproof Fiber Optic Equipment box, Outdoor ONU Access Cabinets It is especially applicable to use in the building with EPON technology access The cabinet provide with protective function,  which can resist accidents or vicious damage.It has the fixed protection function of cable.It has resource management function,  which can be convenient and quick to change the transmission system route.It has the equipment installation feature,  which can be installed 2 sets facilities of 1U like DSLAM,  Ethernet Switch,  ONU and so on.It has power function,  which will provide power box with all-purpose jack.It has surge protective feature. The power outlet and air switch have surge protective device,  which effectively prevent facilities in the cabinet from lightning strike. Specification: Model NO.:SJ-OFOC-ONU-2 Dimension (H×W×D)MM: 670X670X260  Material:Cold-rolled Steel or Stainless Steel. Installation:Wall mounting or Pole Mounting Comments: 1. Overall dimension could be custom made by requirement. 2. Configuration of Box can be customized according to customer requirement. View of product: More Product: Sheet Metal Workshop: Certification: You are manufacturer or trading company? We are 15-year-experience manufacturer of sheet metal fabrication, handle almost anything from metal. You can get quotation of direct factory

SJ-OFOC-06 Wall & Pole Mountable Outdoor Distribution Cabinets Weather-proof outdoor cabinet for installation of optical distribution modules and 19" equipmentGalvanized SteelIP 65 protectedRobust mounting brackets for wall fixingAssembly of modular optical building blocks like splice, patch and splitter modulesSuitable for multi fiber managementProvides a secure anchor for incoming loose tube cables within the cabinetSuitable for different cable diametersEasy installation and removalDoors are protected from external access through hidden hinges19 inch mounting railsSingle front doorCNC controlled polyurethane (PUR) gasketing is available for all of the complete openable surfaces of the outdoor to provide IP65 protection degree characteristic.Max.3 module capacity1, 5 mm mounting plate for cable management on the back sideC-rail for fixing the cables on the back sideOptional: Mounting brackets for wall applications Applications: FTTX applications, Outside of the buildings and poles as cross connect units Specification: Model NO.:SJ-OFOC-06 Dimension (H×W×D)MM:620X580X295 Material:Cold-rolled Steel or Stainless Steel. Installation:Wall mounting or Pole mounting Comments: 1. Overall dimension could be custom made by requirement. 2. Configuration of Box can be customized according to customer requirement. View of product: More Product: Sheet Metal Workshop: Certification: You are manufacturer or trading company?

Sj-ofoc-wme-2 outdoor compact enclosures , wall mounting industrial enclosures wall mounting distribution box wall mounting enclosure description: outdoor waterproof fiber optic equipment box provides the space for onu (optical network unit) or fiber optic media converter installation. It is made of cold-roll steel, water-proof, ip65, suitable for outdoor wall-mounted or pole-mounted application. There are electric power socket, cooling fan inside the box.   features: cold-roll steel material, high structural stability electrostatic painting, nice appearance. Cable entryexit from ports in the bottom of box waterproof, dust-proof, ip65, suitable for outdoor using.   parameters: operating temperature: -20~+55°c atmospheric pressure:70~-106kpa   application: telecommunications, fiber to the home (ftth), lan wan, catv ect. System projects. Specification:   model no.:sj-ofoc-wme-2 dimension (h×w×d)mm:700x600x300 ; 400x600x300 ;350x460x120 material:cold-rolled steel or stainless steel. Installation:wall mounting  comments: 1. Overall dimension could be custom made by requirement. 2. Configuration of box can be customized according to customer requirement. View of product: more product: sheet metal workshop: certification: you are manufacturer or trading company? we are 15-year-experience manufacturer of sheet metal fabrication, handle almost anything from metal. You can get quotation of direct factory.

Sj-ofoc-le  floor standing electrical enclosures ,  outdoor enclosure ,  outdoor electronics enclosure ,  electrical distribution cabinets description: outdoor waterproof fiber optic equipment box provides the space for onu (optical network unit) or fiber optic media converter installation. It is made of cold-roll steel, water-proof, ip65, suitable for outdoor wall-mounted or pole-mounted application. There are electric power socket, cooling fan inside the box.   features: cold-roll steel material, high structural stability electrostatic painting, nice appearance. Cable entryexit from ports in the bottom of box waterproof, dust-proof, ip65, suitable for outdoor using.   parameters: operating temperature: -20~+55°c atmospheric pressure:70~-106kpa   application: telecommunications, fiber to the home (ftth), lan wan, catv ect. System projects. Specification:   model no.:sj-ofoc-le dimension (h×w×d)mm:1100x640x420 material:cold-rolled steel or stainless steel. Installation:wall mounting or pole mounting comments: 1. Overall dimension could be custom made by requirement. 2. Configuration of box can be customized according to customer requirement. View of product: more product: sheet metal workshop: certification: you are manufacturer or trading company? we are 15-year-experience manufacturer of sheet metal fabrication, handle almost anything from metal.

Sj-odb-m03 wall mounted 72cores fiber termination box  fiber optic distribution cabinet  waterproof fiber optic terminal features: outdoor fiber optic distribution boxmetal material for the max strength.easy installations: ready for wall mount – installation kits provided.ready for splitters: designed space for adding splitters.double-layer design for easier installation and maintenances:upper layer for splitters and distributioncable fixing units provided for fixing the outdoor optical cable.accommodates both cable glands as well as tie-wraps lock provided for extra security. 1.ask:what's your moq ?  answer:for customize item, our moq is 100pcs per deign.  for stock products, moq is 50pcs. 2.ask:can I put my company name, logo on the paper box?   answer:of course, please feel free to send us your logo or your idea about designs, our designer will help to design freely.  if you have a design picture, you also can send it to us for reference. 3.ask: how much are they? answer: price is depended on your size, quantity, material and finishing.  please let us know these factors first so that we could give you an exact price. 4.ask:how long can I get them?

SJ-ODB-M11 Wall Mounted Outdoor FTTH Splitter Fiber Distribution Cabinet 32 Cores, FTTH Distribution Box, FTTH Fiber Optic Distribution Cabinet Termination Box Outdoor Wall Mountable available FCSCSTLC Adapter Standard wall mount enclosure is mainly used for connecting the indooroutdoor optical cables,  patch cords and pigtails. It can  be wall mounted or pole mounted and provides various accessories to avoid any unexpected damage to the fiber. This types of  fiber termination box as distribution box,  it is usually used in between wiring closets and equipment for fiber optic cable termination,  use and management. Note: This box does not come with any adapters and pigtails. If you need them,  we can install them for you with few charges.Features Suitable for ribbon and bunchy fiber cables Fiber splice trays can be installed and changed easily Small dimension and exquisite and easy for operation

SJ-ODB-M14 Wall Mounted Outdoor FTTH Splitter Fiber Distribution Cabinet 48 Cores, FTTH Distribution Box, FTTH Optic Terminal Cabinet   The Wall mounted fiber distribution cabinet has functions of cable termination, splicing, distribution and cross-connection.Cold rolled steel with electrostatics plastic-spray surface. Stainless steel with electrostatics plastic-spray surface.Excellent waterproof and dustproof performance.The central board (for adapters) separates the incoming cables and the exiting cables. Splice Trays can be turned over, also can be pulled out to operate outside the box, easy to increase capacity (when space is enough).Adapters are installed on our 6-position adapter holders , no screws need for installing any type adapters, which is very easy for future maintenance and keeps the transmission loss at low level. Fiber optics distribution cabinet are currently being widely used for distributing outdoor optical cable in indoor and outdoor conditions. This cabinet is very suitable for FTTx uses and cross-connecting outdoor optical cables. terminal box terminates up to 2 fiber optic cables, offers spaces for splitters and allocates 48 SC adapters and working under both indoor and outdoor environments. It is a perfect cost-effective solution-provider in the FTTx networks. Sijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure

SJ-OFOC-FTTB-1 ONU Access Box Integrated Distribution Cabinet,  Corridor Integrated Access Cabinet , Integrative Cabinet ONU Access Box widely used for Passive Optical Network (PON) such as FTTB+xDSL, FTTB+LAN, providing customers with voice and data for internet access. The box is usually installed in corridors and weak current well in office buildings and apartments, providing fixing, protection, distribution of fiber, temperature control, power supply and lightning protection, increasing the bandwidth, flexible installation and low-cost operation, serving as the main equipment in PON system in telecommunication operation and speeding up the broadband access network. We have been concentrating on the development and changes of the industry for years and are familiar with the operating preference of each operator, providing considerable reference for the design, manufacturing, testing and acceptance of ONU access box. We are providing a variety of ONU access boxes which perfectly match with mainstream ONU access devices as Huawei 562026 series, MA56105616 series, ZTE ZXDSL9806 series, Fibrehome AN5006 series and the others as well. FeaturesIndoor wall mounted or built-in installation, outdoor wall mounted installationOperating temperature: -40℃~60℃Temperature control unit ensure the stabilityReasonable space designAll operation in the front Specification:    Model NO.:SJ-OFOC-FTTB-1 Dimension (H×W×D)MM:800x600x150 Material:Cold-rolled St

SJ-OFOC-WME-1 Wall Mounting Enclosure Distribution Cabinet Description: Outdoor waterproof fiber optic equipment box provides the space for ONU (Optical network unit) or fiber optic media converter installation. It is made of cold-roll steel, water-proof, IP65, suitable for outdoor wall-mounted or pole-mounted application. There are electric power socket, cooling fan inside the box.   Features: Cold-roll steel material, high structural stability Electrostatic painting, nice appearance. Cable entryexit from ports in the bottom of box Waterproof, dust-proof, IP65, suitable for outdoor using.   Parameters: Operating temperature: -20~+55°C Atmospheric pressure:70~-106Kpa   Application: Telecommunications, Fiber to the home (FTTH), LAN WAN, CATV ect. System projects. Specification:   Model NO.:SJ-OFOC-WME-1 Dimension (H×W×D)MM:400X200X500; 300X200X400 Material:Cold-rolled Steel or Stainless Steel. Installation:Wall mounting or Pole mounting Comments: 1. Overall dimension could be custom made by requirement. 2. Configuration of Box can be customized according to customer requirement.   View of product: More Product: Sheet Metal Workshop: Certification: You are manufacturer or trading company? We are 15-year-experience manufacturer of sheet metal fabrication, handle almost anything from metal. You can get quotation of direct factory which give you advantage in target market.

SJ-OFOC-WZ Industrial Enclosures ,   Electronics Enclosure  ,  Outdoor Electronics Enclosure ,  Electrical Distribution Cabinets ONU Cabinet, Corridor Integrated Access Cabinet, outdoor Access Cabinet Corridor integrated access cabinet is specifically designed for last sector of FTTH installation , the cabinet brings a flexible solution for safely containing optical converter, optical fiber terminal block and optical transmitter and other electronic equipments.Access cabinet is normally installed in the corridor of living building, .It equips with a strong venting system inside, the hermetic shell is designed according to CE standard. The cabinet contains various of batteries, electric power and all kinds of electric equipments.It has capacious space to contain power area, distributing&splicing area and equipment area. The cabinet meets the requirements of IP55 protection level. Features:Double-door design, convenient for installation&maintenanceAdopt 200L 110 High-frequency module, convenient for cable forming and maintenanceCapacious space for the installation of CATV equipmentFlexible configuration for clients' choices, simple operation and easy for maintenanceFiber storage capacity up to 12 cores, and network panel 6-48 portsShutter design for cabinet window, in favour of the heat dispersing&venting of active equipmentsUsing Spcc Cold Rolled Steel material, and surface treatment of deareasing, rustproof, phosphoric spraying.

SJ-ODB-M01 Wall Mounted Outdoor Fiber Optical Distribution Box 24 Cores, Fiber Optic Distribution Panel Metal Fiber Optic Distribution Box is specially designed for FTTH or FTTB for IndoorOutdoor application. It is can manage single, ribbon & bundle fiber cables. It consists of splicing, distribution and panel with ensures the excess fiber cords and pigtails in good order, no interval and easy for management and operation. It offers mufti-functions of distribution management.   Sijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, Network Cabinet, ODF, fiber terminal box, Fiber Optic Patch Panel,  etc. Sijee Equipment Enclosure include: all kinds of Equipment Enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box, stainless steel enclosure, electronic equipment racks , metal cabinets, metal enclosure CATV enclosure, etc. Specification: Name:Outdoor Wall mounted Optic Distribution Box Model NO.:SJ-ODB-M01 Dimension(HxWxD)mm:360X360X85 Capacity:24Fibers Material:Cold-rolled Steel or Stainless Steel. Installation:Wall mounting or Pole mounting. Color:Blackwhite, or be customized according to customer requirement. Use:Widely used in FTTH access network, Telecommunication Networks. Sample:Free sample available. Delivery Time:It dependent on the quantity.

SJ-ODB-M05 Wall Mounted Indoor Fiber Optical Distribution Cases 48 Cores,   Fiber Termination Box  Fiber Optic Distribution Cabinet  All components of the box should be made of materials which are of excellent anti-corrosion  performance,  if not,  then it should be static plastic sprayed; the physical and chemical  capabilities of the material should be stable and should be compatible. 1)The melting temperature for the material used for the heat shrinkable protective sleeves and  the stuffing should be no less than 120°C,  the intenerate temperature should be higher than  90°C,  and could be used under -25 - 40°C; 2)All material should be innocuous,  none-corrosion,  no side effects to human being or other  equipment.  Features: 1)Made of cold-rolling steel,  static spreading-plastic,  small dimension and exquisite and easy for operation. 2)The box are Rack Mounted,  which is convenient to install.

SJ-ODB-M06 Wall Mounted Indoor Fiber Optical Distribution Cabinet 72 Cores,   Fiber Termination Box  Fiber Optic Distribution Cabinet  Features:Integrated with splice cassette and cable management tools, Manage large quantities of fiber with a high packing density.Easy to maintain and extend the capacity.Fiber bend radius control more than 40mm. Suitable for the fusion splice or mechanical splice or fast connector. Capacity of fiber up to 72 ports (144 cores for duplex SC shape LC adapter). Dimension of package: 45*38*15cm Specification: Name:Indoor Wall mounted Optical Terminal Box Model NO.:SJ-ODB-M06 Dimension(HxWxD)mm:450X380X150 Capacity:72Fibers Material:Cold-rolled Steel or Stainless Steel. Installation:Wall mounting or Pole mounting. Color:Blackwhite, or be customized according to customer requirement. Use:Widely used in FTTH access network, Telecommunication Networks. Sample:Free sample available. Delivery Time:It dependent on the quantity of your order. Normally 10-18 days for one 20" container. Export port:Ningbo or Shanghai Supply Ability:20000 piecesweek Freight:Air, Sea, Express( Door to Door Shipping DHL, FEDEX, TNT, UPS) Packing:1 pcs Ctn or customized request Comments:  1. Overall dimension could be custom made by requirement.  2. Configuration of Box can be customized according to customer requirement. 

SJ-ODB-M07 24 cores  FTTH  Distribution Cabinets  Wall Mounted Indoor Fiber Optical Distribution Cabinet 24 Cores,  Terminal Distribution Box Indoor wall type fiber optic distribution frame can manage both single fiber and ribbon & bundle fiber cables for indoor using. consists of cold-roll steel box, splicing unit, distribution unit and panel. Its special design ensures the excess fiber cords and pigtails in good order, no interval and easy for management and operation. Features: Dimension (cm): 40x38x80Indoor using, capacity is 24 cores Various panel plates to fit different adapter interface Splice tray inside changeable Standard size, light weight and reasonable structure Large working space to integrate the pigtail, cables and adapters  Specification: Name:Indoor Wall mounted Optic Distribution Cabinet Model NO.:SJ-ODB-M07 Dimension(HxWxD)mm:400X380X80 Capacity:24Fibers Material:Cold-rolled Steel or Stainless Steel. Installation:Wall mounting or Pole mounting. Color:Blackwhite, or be customized according to customer requirement. Use:Widely used in FTTH access network, Telecommunication Networks. Sample:Free sample available. Delivery Time:It dependent on the quantity of your order. Normally 10-18 days for one 20" container. Export port:Ningbo or Shanghai Supply Ability:20000 piecesweek Freight:Air, Sea, Express( Door to Door Shipping DHL, FEDEX, TNT, UPS)

SJ-ODB-M15 New Type  Distribution Enclosure 48 Cores, FTTH Distribution Box, FTTH Optic Terminal Cabinet  New Fast, flexible outdoor aggregation or demarcation enclosures for every type of fiber optic network Fiber Distribution Enclosure is a lockable cross-connect or interconnect box that is designed to fit ceiling tile or below floor spaces to provide a central distribution point for passive fiber to outdoor applications. Enclosure comes with a  mounting panel that accommodates 2 splitter panel-mount modules. The cable management spools of the enclosure allow an extra cable to be stored out of the way. It features a keyed lock along with protected hinge to offer added security for your connections. The mounting panel pivots to enable easy access to splitter connections while working inside the enclosure.  Offers a central distribution point for passive fiber to the desk applications.2-in conduit openings allow for easy cable entry from 3 sides of the enclosure.Comes in white color. Measures 650X450X200.  For enterprise and multi-dwelling unit applications · Powder-coated Stainless Steel construction for durability. 48-port capacity. Keeps dust and moisture out with the foam seal around the perimeter of the door Sijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, Network Cabinet, ODF, fiber terminal box, Fiber Optic.

SJ-ODB-M16 New Type  Fiber Optic Cable Distribution Box 48 Cores, FTTH Distribution Box, Fiber Optic Cable Distribution Box, Fiber Optic Cable Distribution Enclosure Fiber Optic Cable Distribution Box is an access device for connecting backbone cable and distribution cable installed either indoor or outdoor. Fiber optic cables, FTTH cables and splitters are introduced, fixed and connected in the box. There are indoor type and outdoor type distribution boxes; indoor type usually locates in the corridor or weak current well while the outdoor type locates on wall or poles. It can also be divided into plastic type and metallic type according to material. Features Fiber Optic Cable Distribution Box Could alter to either fiber optical distribution box or fiber division box according to configuration changes Fiber Optic Cable Distribution Box Could install box-type optical splitter. Optional distribution board with cables hierarchical management. Possesses fastening devices of both bow-type cables and standard optical cables.(Cold) welding and SC connector are suitable for optical distribution cable. Finely designed cable routing guarantees curvature radius of cable and fiber.

SJ-ODB-M02 Wall Mounted 48Cores Outdoor Fiber Access Terminal , Fiber Access Terminal Box,   Fiber Access Termination box,  Fiber Terminal Box 48 cores Fiber Optic Distribution BoxFeatures: Available for small capacity communication system, wall mounting, reasonable and compact structure, harmonized with machine room ;The cabinet is composed of two parts, one links with optical cables for fusion connection between optical cable and fiber pigtail and another links with patch cord.;Provide fusion and storage appliance for optical cables ;Reliable protection appliance of fixing, stripping and earthen for optical cables; Whole range protected design for fiber lay to ensure the bending radius=40mmf fiber wiring routing could facilitate management and maintenance of fibers;Provide various accessories to avoid any unexpected damage to the fiber. Specification: Name:Outdoor Wall mounted Optic Distribution Box Model NO.:SJ-ODB-M02 Dimension(HxWxD)mm:450X450X140 Capacity:48 Fibers Material:Cold-rolled Steel or Stainless Steel. Installation:Wall mounting or Pole mounting. Color:Blackwhite, or be customized according to customer requirement. Use:Widely used in FTTH access network, Telecommunication Networks. Sample:Free sample available. Delivery Time:It dependent on the quantity of your order. Normally 10-18 days for one 20" container. Export port:Ningbo or Shanghai Supply Ability:20000 piecesweek

SJ-FTTH-SK-17 288 Cores Waterproof Fiber Optic Splice Box Distribution BoxTermination BoxFTTH BOXFTTX BOX Description: FTTH Drop Cable Type Fiber Optic Splice Closure is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, and distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.FTTH Drop Cable Type Fiber Optic Splice Closure features with ruggedness, which is tested under harsh conditions and stand up to even the most severe conditions of moisture, vibration and extreme temperatures. Humanized design helps user get better experience and safer operating environment. Specification: Model NO.:SJ-FTTH-SK-17 Dimension mm:385X245X130 Capacity:288 Fibers Cable ports:8 round ports Applicable Cable Diameter:8~17 mm Applicable Cable Diameter:2*3mm FTTH Drop Cable, 2*5mm Outdoor Figure8 FTTH Drop Cable Material:Modified Polymer Plastic Sealing Structure:Mechanical Sealing Weight:4.8KGS Installation:Wall mounting & Pole mounting Protection grade:IP 68 Impact Test:IK10 Pull Force:100N Environmental requirement Working temperature: -40℃~+85℃ Relative humidity: ≤85% (+30℃) Atmospheric pressure: 70KPa~106Kpa Thunder-proof technical datasheet The insulation resistance between the grounding device and the metal parts of the box is no less than 2MΩ5

SJ-FTTH-SK-2  SC Fiber Protect Box with SC UPC SM Adapter FTTH Fiber Accessories for fiber cable protection ,  FTTH Drops Cable Protection Box  Fiber cable Protection Box is used for drop cable connecting, splice and protection.Inside can install 1pc SC simplex adapter and 2pcs fast connector connection.  Suitable for FTTH. it is compact size, good appearance, provides extremely economical and optimal protection for exposed single fiber connectors. The box is made of High quality ABS Material.Box cover and bottom utilize silicone rubber ring sealing. Both sides can lead inout 2*3mm FTTH drop cable or 3mm round cable.Wall-mount application, two installation hole distance is 150mm. Feature: Ø Protection class IP65. Ø Light weight, compact size, can stick on wall anywhere with double faced adhesive tape or wall mounted Ø 2 mounting holes distance 150mm. Ø Size: 160*47.9*16mm Application 1. FTTH  FTTX system 2. LAN WAN MAN network 3. GPON ODN network 4. Telecommunication The Sijee Telecom Communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, Network Cabinet, ODF, fiber terminal box, Fiber Optic Patch Panel,  etc. Sijee Equipment Enclosure include: all kinds of Equipment Enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box

Fiber Optic Inline Splice Closures For 1*8 1*16 Plc Splitter   Description  Optical fiber splice closure (FOSC),  also called fiber optic junction box or enclosures.  It is the cable terminated access point,  then connect with optical switch through the  optical fiber jumper. Usage: 1. Suitable for various cable overhead(aerial),  pipeline,  wall mount,  pole mount,  manhole, 2. underground direct buried laying mode and branch connection. 3. Suitable for structure cable in the termination computer room. 4. The FOSC closure is usually suitable for indoor or outdoor non-open use,  not suitable for outdoor open use,  if you want to use like this,   5. should take protective measures.  6. Working temperature: indoor type: -5 ~+40 degree; outdoor type: -20 -+60 degree    GJS-24-D(PLC) Splitter Fiber Distribution Closure is a compact and flexible closure that provides for connections between fiber optic cables and passive optical.

Fiber Optic Splice Closures For 1*16 PLC Splitter The Fiber Optic Splice closure adopts horizontal mechanical sealing and advanced internal structure design To adopt engineering PC plastic with high-strength to make the closure has longer life time and excellent sealing performance The closure is spacious enough for winding and storing fibers The patented sealing structure keep good sealing performance after re-entry and re-using It is multi-functions, with different PLC splitter and adaptor panels, it could work for branch splicing,  splitting and patching. It could save the installation time and improve work efficiently. It is especially applicable to FTTH optical fiber distribution.   Installation way:aerial mounted, underground buried mounted, conduit mounted, wall mounting Warranty time:25years Description: Made of high strength engineering ABS, PC, ABS or PC composite material. 3 inlet 3 outlet 4 pcs trays Features: Innovative insert plates and fixing bolts, used to fix and seal FOSC, simple installation.

Sj-ftth-sk-4 1 input 2 output 2 cores ftth fiber optic fusion splicing protection box   fiber optic drop cable splicing protective box fiber optical cable protection box ftth drop splice enclosure optical fiber fusion splice protection box description this new type butterfly fiber optic cable protective box is a case to put in a butterfly cable with a thermal protection tube after hot melting, so that the splice spot can get a better protection. Relative to the cold welding, the hot one can improve the optical performance of connector, make the effective connection rate increased to one hundred percent, prolong the service life of the product and lower maintenance costs.   this fiber drop splice closure is used in ftth connection, we use this fiber drop repair splice closure to make heat shrinkable splice with 2pcs drop cable (or drop cable sc connector terminated one side). It`s designed for either flat drop cable or round drop cable. This fiber drop repair splice closure is installed indoor or outdoor, it provide good connection and protection in ftth constructions.   dimension: 83(l) x 18(w) x12(h) mm the sijee telecom communication products include: fiber optic cross connection cabinet, fiber optic splice closure,  fiber optical distribution box, network cabinet, odf, fiber terminal box, fiber optic patch panel,  etc. Sijee equipment enclosure include: all kinds of equipment enclosure, wall mounting enclosure, junction box, net