Pansco Structured Packing Products, Inc.

hebei, China

We are offering grid structured packing.grid structured packing combines the high surface area of traditional structured packing with the rugged construction of the common grid configuration to provide high heat transfer efficiency, high mechanical strength and antifouling characteristics in severe services that are prone to plugging, coking, erosion and containing solids. The smooth surface provides low liquid hold up reducing the residence time and the possibility of coke formation.

We are offering knitted structured packing.knitted structured packing is suited for applications that demand high separation efficiency with a lower pressure drop. the packing is made from multiple strands of fine wire that are knitted together in a tubular pattern and then crimped and coiled or layered to provide a three dimensional structure of peak and valleys. The multi-strand fine wire provides a high surface area and a capillary effect on the descending liquid to promote intimate vapor-liquid contact, uniform liquid distribution, and a thin layer of liquid film. This results in higher mass transfer efficiencies, lower pressure drop, and high turndown ratios, up to 20:1. Typical hetp values range from 3” to 12”. For high vacuum services, 4” to 6” hetp is typical.

We are offering expanded metal prick corrugated plate packing.metal sheet is perforated very small holes, and then is pushed to corrugated sheet; finally it is assembled to coil. It can improve the wet ability of packing, and it still has the excellent separation performance of wire gauze corrugated packing.

We are offering metal plate net corrugated packing.metal plate-net corrugated packing is punched lot of diamond-shaped tiny holes at metal thin slab. Then drawn the plate to appointed specification. It cuts down the complex procedures of drawing wire and knitting mesh. product characteristics: metal plate-net corrugated packing still has the excellent wetting ability and separation performance of wire gauze packing.

We are offering metal perforated plate corrugated packing.metal perforated plate corrugated packing is made from perforated plate with channel corrugation on surface, and remains structure feature of metal wire gauze packing. It strengthens uniform liquid distribution and surface wetting ability, which increases mass transfer efficiency. The unit height is 50-200mm per coil, and the packing is prepared in blocks when diameter is larger than 1.5m. it is formed from vertical sheets of corrugated metal with the angle of the corrugation reversed in adjacent sheets to form an open structure with inclined flow channel. Its structure can not only change the distribution of liquid, but also increase the transfer efficiency.

We are offering laboratory structured packing.laboratory structured packing is used in: small laboratory columns ranging from 50 to and 80 mm in diameter where a high number of theoretical stages is required with low liquid loading preliminary appraisal of pilot plant columns some special features of this product are: vacuum operation under to atmospheric pressures reliable scale-up small hold-up.