Qinsun Instruments

Shanghai, China

• MOQ 1 Set(s)

we are offering Ajwain Oil. Standards: ASTM D3512, GBT 4802.4, ISO 12945.3, JIS L1076-D Applications: Random Tumble Pilling Tester is used to determine the pilling and fuzzing characteristics of textile fabrics. Technical Parameters: 1. 4 test chambers; 2. Equipped with a rotating stainless impellers in each test chamber; 3. Reliably Sealing of the testing chambers; 4. A digital electronic counter; 5. A buzzer to remind the end of test; 6. Equipped with pressure gauge and the timer; 7. Dimension of Drum: 146×152mm; 8. Dimension of Cork liner: 452×146×1.5mm; 9. Rods: L=121mm; 10. Rotating speed: 1200rmin; 11. Compressed air: 0.014-0.021MPa.

• MOQ 1 Set(s)
• Brand NameQINSUN
• CertificationISO
• Country of OriginCHINA
• Model Number03

we are offering Dry Cleaning Cylinder, Dry Washing Cylinder. Applications: Dry Cleaning and Washing Cylinder is designed for determining color fastness to dry cleaning and chlorinated pool water, to prepare samples for flammability testing. Product Information: The Dry Cleaning And Washing Cylinder is comprised of stainless steel rotating test chamber with capacity of 7650ml, support, variable speed drive with digital timer and displays. Technical Parameters: 1.Equipped with stainless steel rotating roller; 2.Height of tank: 330mm; 3.Diameter of in-tank: 220mm; 4.Rotating speed can be adjusted according to customer's requirements; 5.Overall dimension: 720×490×620mm(L×W×H); 6.Equipped with digital timer and displays; 7.Weight: 98kg.

• MOQ 1 Set(s)

We are offering Fabric Thickness Gauge. Testing Standards: JIS L1096L1018, GBT 3820, ISO 5084 Applications: Fabric Thickness Gauge is an apparatus to measure the thickness of fabric, knitwear, film, rubber, soft urethane form. Technical Parameters of Fabric Thickness Gauge: 1. Measuring capacity (Standard-type): 0～10mm 2. Min. Reading: 0.01mm 3. Area of pressure (Standard-type): 20cm2(φ: 50.5±0.01mm) 4. Measuring pressure: 0.3kPa (3gfcm2), 0.7kPa (7gfcm2) , 1.0kPa (10.2gfcm2) 5. Access. Weight: 80g (for 0.7kPa), 144g (for 1.0kPa) 6. Dimensions (approx.): W120×D150×H200mm

• MOQ 1 Set(s)

Testing Standards: ISO 105 X11P01, BS 1006, AATCC 92114117133, GBT 57186152, DIN 5402254060, JIS L0879L0850 Applications: ScorchSublimation Tester is used in the laboratory to evaluate colour fastness to dry heat, hot pressing and sublimation, as well as thermal stability, can perform color fastness test of fabric, chlorine damaged test(resin finishing fabric), yellowing test of bleached fabric, sublimation fastness test for disperse dye, hot water fastness test for reactive dye. Technical Parameters: A.Thermaplate: W100×D40mm, Aluminum (same in up and bottom); B.Temperature control: independent digital timers with the minimum display of 1℃(one with each of top and bottom plates, respectively); C.A pre-settable digital timer with alarm reminding; D.Maximum temperature: 250℃; E.Thermaplate pressure: 4±1 kPa(40cm2); F.Heater: cartridge heater with 100V, 150W(one with each of top and bottom plates, respectively); G.Outside Dimension: W250×D300×H230mm.

• MOQ 1 Set(s)

Testing Standards: ISO 105 E01E02E04, BS 1006, AATCC 15106107, DIN 54005, M&S C6C7, NEXT TM4, DIN EN ISO 105 E01E02E04, GBT 399257135714 Applications: The Perspiration Tester is designed for color fastness test to perspiration, sea water, saliva, distilled water and in colored textiles. Technical Parameters: A.Provided with a stainless steel frame, 2 loading weights and 21 acrylic separator plates. B.A stainless steel frame with a capacity of 20 samples of 10cm×4 cm. C.Each sample held between acrylic separator plates. D.Different weights shown with the corresponding test standards to avoid errors.