Reach Optics Co.,Limited

• MOQ 1 Piece(s)

We are offering 1x2 mechanical optical switch. Reach optics' ms series switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. the switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The ms fiberoptic switches are true switching solution for optical networking applications. features unmatched low cost low lnsertion loss latching or non-latching high channel lsolation highly stable and reliable epoxy-free optical path applications optical signal routing optical network protectionrestoration configurable optical adddrop transmitter and receiver protection network test systems lnstrumentation.

• MOQ 1 Piece(s)

We are offering 10g x2 80km 1550nm transceiver. Reach optics' x2 transceiver is a standardized form factor for 10 gbs fiber optic transponders that is used for data transfer rates from 10.3 gbs to 10.5 gbs. It is protocol-specific: either 10g ethernet or 10g fibre channel versions are available. x2 transponders are used in datacom optical links only (not telecom), and they are smaller than old generation xenpak transponders. Its electrical interface to the host board is also standardized and is called xaui (4 x 3.125 gbs). reach optics offers the whole series of 10g x2 transceiver, including: x2 10gbase-sr 300m mmf om3; x2 10gbase-lrm mm 220m, x2 10gbase-lr sm 10-20km, x2 10gbase-er sm 40km, x2 10gbase-zr sm 80km, 40 channels dwdm x2 etc. features x2 msa compliant 70-pin connector sc duplex receptacle package xaui 4x3.125gbs and txrx 10gbs data rate cooled ea-dfbapd power supply: +5.0 v, +3.3 v, aps:+1.2 v power dissipation 4w maximum 0ºc to 70ºc operating case temperature digital diagnostic monitoring management and control with mdio 2-wire bus xaui electrical interface 4 x 3.125 gbs ethernet ≤80km er 10gbe rohs compliant and lead free applications 10 gbs ethernet transmission systems

• MOQ 1 Piece(s)

We are offering 10g xenpak 1550nm 80km transceiver. This is new products in reach optics company, with good quality and pretty good price, welcome to your visit. Reach optics offers the whole series of 10g xenpak transceiver, including: xenpak 10gbase-sr 300m (smf om3), xenpak 10gbase-lrm mmf 220m, xenpak 10gbase-lr smf 10-20km, xenpak 10gbase-er smf 40km, xenpak 10gbase-zr smf 80km, 40 channels dwdm xenpak transceiver. Features xenpak msa compliant 70-pin connector sc duplex receptacle package xaui 4x3.125gbs and txrx 10gbs data rate cooled ea-dfbapd power supply: +5.0 v, +3.3 v, aps:+1.2 v power dissipation 4w maximum 0ºc to 70ºc operating case temperature digital diagnostic monitoring management and control with mdio 2-wire bus xaui electrical interface 4 x 3.125 gbs ethernet ≤80km zr 10gbe rohs compliant and lead free applications 10 gbits ethernet transmission systems

• MOQ 1 Pair

We offer reach optics supply 1.25g sfp 20km 1550nm tx1310nm rx with very good performance and competitive price. Also we could offer you oem label service. Welcome for your visit. 1.25gbps sfp bi-directional transceiver, 20km reach 1550nm tx 1310 nm rx features dual data-rate of 1.25gbps1.063gbps operation 1550nm dfb laser and pin photodetector for 20km transmission compliant with sfp msa and sff-8472 with simplex lc receptacle digital diagnostic monitoring: internal calibration or external calibration compatible with sonet oc-24-lr-1 compatible with rohs +3.3v single power supply operating case temperature: standard : 0 to +70ã�â°c applications gigabit ethernet fiber channel switch to switch interface switched backplane applications routerserver interface other optical transmission systems

• MOQ 1 Piece(s)

We are offering 8ch 100g dwdm muxdemux module is reach optics' hot sale products, it with very good quality and price, welcome for your visit. dwdm stands for dense wavelength-division multiplexing. This technique multiplexes optical signals together on one single fiber. For this it uses different colors (wavelength) which are combined in a mux. The device where the optical signals are multiplexed and de-multiplexed is called a mux, it is also called fiber optical multiplexer or cwdm multiplexer. basically all optical transmission is done by dual fibers where one fiber is transporting data from east to west and the other west to east hence one wdm mux has a multiplexer and a de-multiplexer. There are 2 standards for multiplexing: cwdm and dwdm. The main difference is the wavelength steps between the channels, for cwdm this is 20nm (course) and for dwdm this is typically 0.8nm (dense). The most common dwdm technique is the 100 ghz c-band which has steps of 0.8nm and works from the 1530 to 1570nm band. reach optics offers standard 3 types of muxes: 8channels , 16channels and 40channels. We have standardize our 8 channels mux from channel 28 to 35 and for these channels we try to keep stock on all the 80km sfp+sfp10g and xfp. The 40 channels mux starts at channel 20 till 59. All dwdm muxes have the abs box module type and 19 inch rack mounts type that the mux and demux inside.

• MOQ 1 Piece(s)

We offer reach optics offer 1.25g cwdm sfp 80km 1450~1610nm with very good performance and competitive price, this is very good sale products in our company, and we will offer you best service, welcome to your visit.

• MOQ 1 Piece(s)

We are offering planar lightwave circuit splitter rack mount type reach optics' planar lightwave circuit (plc) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in pon networks to realize optical signal power splitting. reach optics provides whole series of 1xn and 2xn splitter products that are tailored for specific applications. All products meet gr-1209-core-2001 and gr-1221-core-1999 requirements. features low insertion loss low pdl excellent environmental & mechanial stability qualified under telcordia gr-1221 and gr-1209 applications fttx (fttp, ftth, fttn, fttc) passive optical networks (pon) local area networks (lan) cable television test equipments

• MOQ 1 Piece(s)

We are offering 3port 1310nm, 1550nm optical circulator. 3 port polarization-insensitive optical circulator reach optics' polarization insensitive optical circulator utilizes proprietary designs and metal bonding micro optics packaging. It provides low insertion loss, broad band high isolation, low pdl, excellent temperature stability and optical path epoxy free. it can be used for wavelength adddrop, dispersion compensation and edfa application. features low insertion loss wide band high isolation low pdl compact in-line package high stability and reliability epoxy-free on optical path applications optical amplifier metro area network wavelength adddrop dispersion compensation bi-direcation communication.

• MOQ 1 Piece(s)

We are offering 10g sfp+ 80km 1550nm also we called it 10g sfp+ zr, this is very hot sale products, especially in europe market, it's with very good performance and competitive price, welcome to your visit for reach optics. rpp-55192-zrc 80km sfp+ zr optical transceiver features compliant with sff-8431 and iee802.3ae data rate selectable ≤4.25gbps or 9.95gbps to 11.3gbps bit rates cooled eml transmitter and apd receiver link length up to 80km low power dissipation 1.4w typical (maximum:2w) -5ºc to 70ºc operating case temperature single 3.3v power supply diagnostic performance monitoring of module temperature, supply voltages, laser bias current, transmit optical power, receive optical power rohs compliant and lead free applications 10g ethernet 10g fiber channel (withwithout fec) description reach optics' sfp+zr transceiver is designed for 8.5g10g fiber- channel and 10gbe applications. The transceiver consists of two sections: the transmitter section incorporates a colded eml laser. And the receiver section consists of a apd photodiode integrated with a tia. All modules satisfy class I laser safety requirements. Reach optics' sfp+zr digital diagnostics functions are available via a 2-wire serial interface, as specified in sff-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.