Sammy Trading Co., Ltd

Dongguan, Guangdong, China

We are offering hot melt polyisobutylne. 1. Description  the product is a solvent free, permanently plastic and load-depending, deformable, one-component adhesive/sealant based on polyisobutylene. Good adhesion to glass, aluminum, steel etc.   2. Application area  used in automotive inner panel, automotive window, speaker, container construction etc.   3. Notice keep the applying area clean and dry, use the special hot-melt extrusion pump. Extrusion temperature at 1200c-1400c, environmental temperature >80c. 4. Storage  store under temperature -1000cto3000c and shelf life is 24months. 5. Package: 25kg/drum or 18kg/drum or in block.

We are offering self-fusing damp butyl sheet. 690 self-fusing damp butyl sheet 1. Description: 690 is a type of solvent-free, non-spoliation sheet sealing material which is made from high quality rubber, plasticizer, etc, it has good performance on adhesion, acid and alkali resistance, ageing resistance, uv resistance, waterproof, and so on, and it is one of the best damping, reinforcement,   noise reducing material. 2. Application area: sealing, damping, heat insulation for auto body, auto-condition, floor of car. 3. Usage tear off the release paper, sick to the application place, compact it. 5*70*105mm＜3*50*700mm or new dimension according to customer’s draw. 4. Storage shelf life is 24 months. This product is non-flammable materials, but don't store them near the heat source, and prevent them from direct sunlight in order to avoid distortion.

We are offering polyurethane sealant. 653 polyurethane sealant 653 polyurethane sealant is used for the sealing of the joints of the refrigeration compartment, machinery, airport runway, superhighway, and construction. 1. Description 653 polyurethane sealant can strongly stick to most traditional building materials. 2. Application areas it can be used for airproofing and bonding in all kinds of building materials such as concrete, wood, aluminum, painted metal, polyester, glass, pvc, concrete tile, earthen brick, and chinaware. 3. Technical parameters item 653 appearance white, grey, black, cream surface dry time(min) 30-60 solidifying rate(mm/24h) ≥3.0 density(g/cm³) 1.2±0.05 solid content(%) ≥95 hardness(ha) ≥35 breaking strength(mpa) ≥2.0 breaking elongation(%) ≥400 shearing strength(mpa) ≥1.6 tearing strength(n/mm) ≥7.5 stability very good resistance to low temperature°c -45°c no fracture application temperature°c 5-35 service temperature(continuous)short term (up to 8 hrs) -40-90  120 4. Usage the application temperature should be between 5°c and 40°c.spray the glue on the required area by using either manual glue gun or air-driving glue and the jointing and should clean and dry. After that, please make sure the joint area full of sealant and make it nice. 5. Package and storage 300ml/tube, 48 tubes/carton; 600ml/tube, 20 tubes/carton; 5 & 55 gallons steel keg. Stored under temperature between 5°c to 25°c, and shelf life is 6 months.

We are offering butyl strips. 1. Description 669 is a non-solidation, self-adhesive sealing strip, and gives best performance on weather resistance, anti-aging, and waterproofing. It can also be used for damping and protecting the application area. 2. Application area used in the areas such as automotive inside panel barrier, automotive window, automotive speaker and container construction etc. 3.technique data item unit value main content   butyl rubber high temperature resistance 90°c, 2h no flowing flexibility in low temperature -40°c no cracks adhesive strength steel ball 13.5 elongation % 420 l % 75 water transmission g/m 2 24hr 0 demsity g/cm3 1.35±0.05 remark: 1)all standard temperature is 23°c, unless remarked in the table. 2) quality guarantee 20 years(u.v resistance 100hours/year). 4. Standard color: black (or according to customers' requirement). 5.dimension and package dimension can be made according to customer demands carton size 300mm*300mm*265mm

We are offering self-fusing insulating tape. 663a self-fusing insulating tape 1. Description 663a is one kind of sef-fusing and conformable insulating tape. 2. Application (1) sealing for cable jointing, telecoms jointing. (2) insulating and waterproofing on insulated overhead line. 3. Advantages (1)  self-fusing tape. Compatible with solid dielectric cable insulations. (2)  adaptable with all kind of cables, excellent weather resistance. 4. Standard color: black. 5. Dimension and package size 3mm*63.5mm*600mm, 1.5mm*63.5mm*60mm, packed in carton.

We are offering automotive bending extrusion strip. 1. Description 669 is a non-solidation, self-adhesive sealing strip, and gives best performance on weather resistance, anti-aging, and waterproofing. It can also be used for damping and protecting the application area. 2. Application area used in the areas such as automotive inside panel barrier, automotive window, automotive speaker and container construction etc. 3. Technique data item unit value main content   butyl rubber high temperature resistance 90°c, 2h no flowing flexibility in low temperature -40°c no cracks adhesive strength steel ball 13.5 elongation % 420 l % 75 water transmission g/m 2 24hr 0 demsity g/cm3 1.35±0.05 remark: 1)all standard temperature is 23°c, unless remarked in the table. 2) quality guarantee 20 years(u.v resistance 100hours/year). 4. Standard color: black (or according to customers' requirement). 5. Dimension and package dimension can be made according to customer demands carton size 300mm*300mm*265mm.

We are offering dylon multi urpose dye, dylon dyes. Dylon multi-purpose dye, dylon dyes, 500g dylon multi-purpose dye is suitable for dyeing natural fabrics, nylon and lycra. It is also suitable for dyeing buttons and feathers. Multi-purpose dye is ideal for dyeing costumes and props for all types of theatrical productions 1. Instructions suitable fabrics: cotton, linen, viscose, wool, silk, nylon and lycra (elastane). not for pure synthetics (except nylon), polyester/wool mixtures, or fabrics with special finishes. Multi-purpose dye is not colourfast so garments should always be washed separately. 2. 5g of powder is sufficient to dye up to 250g/8 oz dry weight fabric.you will need:(1) 30g / 1oz of salt (2) rubber gloves(3) a saucepan 3. Instructions:(1) weigh dry fabric. Wash fabric thoroughly even if new and leave damp.(2) fill saucepan or similar heatproof container with enough hot water to cover article and allow easy movement during dyeing. (3) wearing rubber gloves, dissolve dye in 500ml/1 pint of boiling water, stir well. (4) add solution to vessel with 30g/1oz salt, stirring well. (5) put in clean, damp article and raise temperature to simmer, then stir constantly for 20 minutes to ensure even dyeing. (6) rinse article until water runs clear. Results are not colourfast, so dyed garments should be turned inside out and washed separately. (7) dry away from direct heat and sunlight. 4. Special instructions for wool:follow steps for 1 to 4 above.(5) put in clean, damp, unfolded article. Bring slowly to a simmer and reduce heat at once. Stir gently for 10 minutes.(6) remove article from dye and allow to cool before rinsing in lukewarm water, until water runs clear.(7) dry away from direct heat and sunlight.

We are offering waterproof butyl tape. 1. Description 660 waterproof butyl tape gives best performance on weather resistance, uv resistance, oxides resistance, and non-solidified in its lifetime. 2. Uses (1)    steel construction, sun panel, drains parts. (2)    window & door; concrete roof; pipes. (3)    pc panel, repairing of roof and cars. 3. Advantage (1)     non-solidified, flexible, good adaptability. (2)     good anit-uv performance, water-proofing, life time up to 20 yeas. 4. Main technique date property unit value main contents   butyl rubber high temperature performance 90°c, 2h no flowing low temperature flexbility -40°c no crack long time adhesion strength steel ball 13.5 elongation % 420 resume % 75 water resistance g/m 2 24hr 0 gravity g/cm3 1.35±0.05 peeling strength aluminium board n/cm 33.9 steel board n/cm 35.5 concrete roof n/cm 38.6 copper n/cm 34.1 glass n/cm 37.3 remarks:1.testing temperature is 23°c, besides low-temperature test. 2.life time 20 years based on 100 hours uv resistance/year. 5. Color: grey, black , white. 6. Package packed in carton, it can also laminate with non-woven cloth, signal face aluminum foil, pe and so on. Dimension is according to customer’s requirement. 7. Notice (1)surface must be dry and clean (remove any moisture, grease and dust). (2)butyl tape should be stored at room temperature and normal humidity, and kept away from sunshine and hot air. (3)one time application can make sure its best performance.

We are offering insulating butyl tape. 663b insulating butyl tape product description the tape is specially designed for cable and telecom industry. Good performance for insulation and water proof. Working temperature 90 degree (can reach 130 degree in short time).reliable performance for water proof and uv resistance.   2. Application field1) cable jointing.2) telecoms. 3) aerial installation.4) mechanical fixings. 5) hose and pipe repair.6) sports handle wraping   3. Advantages 1) solvent free, good weather-resistance and insulation performance.2) adaptable to cables. 3mm*63.5mm*600mm carton packing or according to customer's require 4. Main technical data item method result heat resistance  astm d-4388 pass 130 degree   tensile strength astm d-4325 1.1n/mm²   elongation at rupture astm d-4325 1000% air&water transmittance astm d-3833 0.08g/100in²/24hr insulation resistance astm d-4325 19.3kv/mm ozone resistance astm d-3833  pass 5. Notice 1) surface must be dry and clean, remove any moisture , grease and dust.2) butyl tape should be stored at room temperature and normal humidity, and kept away from sunshine and hot air.3) one time application can make sure its best performance.

We are offering automotive gap filling butyl sealant. 1. Description 668 automotive gap-filling butyl sealant is a type of netural, one-component, permanent non-solidation sealing material , it shows good performance on air-tightness, weather resistance. Good performance on air-tightness. Ageing resistance. No drying out or embrittlensess, uv resistance, solvent-free, environmental friendly. 2. Application area gasket, gap-filling for automotive doors, windows, inside and outside panels, etc. 3. Technique data item value standard color black or grey / smell insipidity / penetration 1/10mm 290±10 gb/t269-91 density 1.37g/cm³ gb/t13477  solid contents ≥90 gb/t13477 hardness(a) 10±5 gb/t531 flowing no gb/t13477 application temperature °c -45--90°c, in short time 160°c / extrusion rate, s (extrusion pressure (0.34mpa) ≤10 gb/t13477 age resistance good(25-30years) gb/t13477 4. Advantage (1) no flowing under high temperature, easy to extrude under low temperature. (2) good performance on sealing and water resistance, small temperature-sensitive. 5. Package 5&55 gallons steel keg. 6. Usage on line applying with the sealant pump, the application surface should be clean, dry and oil-free. The operating temperature should be within 10°c-35°c. Adjust the pressure of the pump according to deferent temperature to control the diameter of the sealant. 7. Storage storage temperature: 0°c-40°c, 12months.

We are offering dylon hand dye, dylon dyes etc. dylon hand dye instructions1. Directions(1) weigh dry fabric. Wash thoroughly. Leave damp (2) using rubber gloves, dissolve dye in 500ml warm water(3) fill bowl/stainless steel sink with approx 6 litres warm water (40°c)(4) stir in 250g (5tbsp) salt. Add dye & stir well(5) submerge fabric in water(6) stir for 15mins, then stir regularly for 45mins(7) rinse fabric in cold water. Wash in warm water and dry away from direct heat & sunlight 2. Helpful hints (1) you will need 250g salt(2) 1 pack dyes up to 250g fabric (e.g. Shirt) to full shade or larger amounts to lighter shade(3) suitable fabrics: cotton, linen and viscose. Wool, silk, polyester/cotton and polyester/viscose mixes will dye to lighter shade (4) not suitable: pure polyester, acrylic, nylon & fabric with special finishes(5)wash separately for first few washes to remove any excess dye(6) please note: colour mixing rules apply (e.g. Blue on red gives purple) 3. Microwave dying (1) hand dye can be used in the microwave to create special effects.(2)for cotton, linen, silk and polyester/cotton mixes only. (3)micro-dyeing is not suitable for wool, viscose or synthetic fabrics.(4) do not use in viscose, as fabric can give off harmful fumes.(5) remove all metal on fabric (zips, studs, etc). 4. How to use(1) wash the fabric and leave damp. （2） select your special effect and prepare the fabric by scrunching, knotting, twisting or folding - tie all fabrics tightly. （3） wearing rubber gloves, empty the dye carefully into the bowl and gradually add 250 ml / ½ pint of hot water. Stir thoroughly to ensure dye is dissolved. Add further 250 ml / ½ pint of water.（4）place the fabric in the bowl and work into the dye.（5）put the bowl into a plastic bag or plastic wrap and place in the microwave. Set on ‘high’ for 4 minutes.（6）after 4 minutes remove the bowl from the oven - remember to protect your hands from the heat.（7）tip away the dye solution and rinse the fabric in cold water. To protect the pattern do not undo any knots, twists, folds etc., until the water runs clear.（8）rinse, wash and dry as for the hand method.

we are offering Dylon machine dye, Dylon Dyes etc. The shade you achieve will depend on 3 things:1. FABRIC TYPE(1)Cotton,  linen & viscose will dye to full shade;(2)Polyester/cotton&polyester viscose mixes will dye to lighter shade'(3)Wool,  silk,  polyester,  acrylic,  nylon & fabric with special finishes e.g. dry clean only,  cannot be dyed;2. FABRIC AMOUNT(1)One pack will dye up to 600g of fabric (e.g. jeans,  bath towel,  double sheet) to the full shade & up to 1.2kg of fabric (e.g.double duvet) to lighter shade(2)Multiple packs will dye larger amounts to full shade,  e.g. 2 packs for 1200g (e.g. double duvet) or 4 packs for 2kg (e.g. curtains)3. ORIGINAL FABRIC COLOUR(1)You can change one strong colour to another (or dye it to a lighter shade) by using DYLON PRE-DYE which lightens before you dye,  ready for colour change.(2) Otherwise colour mixing rules apply,  e.g. blue dye on red fabric gives purple(3)Patterned fabric will often still show throughOur promise: This dye won't damage your machine or affect subsequent washes5. HELPFUL HINTS(1) Use in front loading automatic washing machines. Do not use in launderette machines.(2)Don't dye more than half machine’s maximum load to avoid crowding which will give patchy results(3)Don’t use more than five packs of dye at once(4)Dyeing may not cover stains,  faded areas or bleach marks(5)Should any dye be left in machine after dyeing,  add cup of bleach to drum,  add detergent as usual & run machine empty on 40°C cycle(6)After dyeing,  wash separately or with similar colours for first two washes to remove any excess dye(7)Polyester stitching will not dye

We are offering waterproof butyl strips.651 water-butyl strips for water tanks & wetrooms. 1. Product description  651 is a non-solidation self-adhesive sealing strip with a formulation of high quality rubber, plasticizer etc. The strip is suitable in many areas such as sealing with stones, sealing with ceramic tile etc. It is expandable, flexible, easy to adapt to construction shapes. It is also a solvent-free product and no drying out or embrittleness.   2. Application areas wherever the joint between the wall and bathtub, cabinet, lavabo, water tanks etc.   3. Advantage (1) good plastic surface, good decorating effects. (2) high quality butyl ensures good water-proof performance. (3) rohs certification. (4) easy to application, self-adhesive. (5)good performance than other sealant. No moldy.

We are offering steel structure butyl sealant. 1. Description: 666 butyl sealant is a neutral compose of single butyl rubber with properties of anti-aging/corrosion/oxidation, water resistance, tightness; wide range of deformation and especially under temperature circumstance. Crack. 2. Application: applies to all kinds of seams, holes and cracks in steel roofs, 666 butyl sealant has a perfect tolerance on structure strains results from tough weather such as strong winds. Flood, storming, which often accounts for natural siphonage, i.e. Leakage 3. Physical properties composition:butyl rubber solid content:>80% composition:appearance: tacky solid specific gravity:1.4±0.05 vertical flowablity: n/a volatile: organic solvent uv resistance: excellent application temperature -40℃ to 90℃ 4. Color: grey is standard color, other color is available according to customer special needs. 5. Package: 310ml plastic tube; 5 & 55 gallons steel keg   6. Usage:  1). Surface must be clean, dry and solid2). 310ml plastic usage please follow picture3). 5 & 55 gallons steel keg please follow picture.