Shenzhen Ariza Electronic Co.,Ltd

• MOQ 100 Set(s)

1. Protection different zone: 32 zones with 32 different zones indicated on panel. 2. Each zone can be put more sensors. 3. Partial disarmed optional by remote control. One keypad easy to partial disarmed some sensors that programmed in the second zone. 4. Auto-dial up 6 phone numbers and recycle to repeat unless confirmed. 5. Store voice recorded message (10 second), it can be recovered. When received alarm message, it speaks as you spoken. 6. NI-MH rechargeable battery to back up power: >24 hours. Auto-switch if AC power is off. 7.Telephone manages the alarm system, convenience. 8.Phone trunks protected to avoid any designing destroy. 9.LED on the panel to display protection zone. 10. PIR detector is preset for the second zone which can be disarmed solely 11.Audible /mute siren optional. 12.Quick program by the panel keyboard. 13.When received alarm call, you can press the keypad on the phone to disarm/arm/monitoring/start on/off siren 14.Panel keyboard password protected and incoming calling password protected. 15.Alarm time can be customized. 16.Siren sounds time/ Alarm triggered time/armed alarm times to be programmed to be delayed. 17.All panels can connect with the alarm receipt managing centre

• MOQ 100 Set(s)

1. 8 wireless different zones and 8 wires zones 2. Long-distance monitoring and alarm protected zone recheck 3. 8 led to indicate the alarm zone. 4. To program 6 phone number 5. Multi-armed mode: delay armed, armed without auto-dial up 6. Prompt sound for each alarm. 6. With keyboard to program each function 7. In-coming calling times to be programmed 8. Telephone trunk protected 9. Battery back-up , built-in panel. 10. While alarm is happened, it can track the alarm zone by real time through long-distance. specification: 1. Wireless frequency: two option: 433mhz or 315mhz 2. An adaptor: option: input electricity from 110 acv ~240 ac, customized. adaptor choosing: two round pins, two flat pins, three pins customized 3. Wireless receiving distance in open place: >250m, indoor: 30~50m, (depend on the surrounding environment and wireless interference) 4. Standby current: 5. Alarm volume: internal :95db, external siren: 110~120 db 6. One control panel with one internal siren: working voltage:+9 dcv, 200ma. 7. Two wireless remote controllers: four button: disarm/arm/panic/pir detector 8. One wireless magnetic door sensor:12 dcv

• MOQ 100 Set(s)

1.with built-in battery, when power failure, the battery can still back up the system for 6 hours 2.with lcd display when power on, and show the 3.anti-interfere function. When someone interferes it with same frequency, the control unit will activate siren to alarm. 4. 8 wireless defense zone display and 7 wired defense zone display . 5.can record the message for 10 secs . 6.stores 2 groups of monitoring center and 4 groups of user phone numbers to dial out and replay the recorded message if there is an alarm. 7.with telephone line anti-cutting alarm function 8.with output ups battery, when power failure, can still back up the system for about 24hours

• MOQ 100 Set(s)

This product is a solar-powered alarm and be able to add extral wireless accessories.solar panels make use of storage during the day, so 6v/1.2ah high-capacity batteries to ensure them work at night or in winter solar alarm job self-sustaining. the first time, in order to ensure plenty of battery power, please use the charger for lead 9v/300ma sexual battery charge, charging time for 3 to 4 hours is better. 1.on the back of the siren, the button "start" means battery switch.plug the adaptor, then turn on the switch, and the siren can begin to charge 2.“learn” means the learning code button. When the system under disarm status, press"learn" button once, led (learning led)lights on all the time, means it enters learning status.then trigger any sensor, led will flashes, means learning successfully, and later it will automatically exit learning status.in this way, you can learn many sensors. Clear up the sensors : hold learn button for 15 seconds, you can clear up all the sensors you have learned. 3.siren alarm time: 1-8 mins optional. Factory default time:1 min. Pull up the button"1"on the board, then the siren alarm time will be 2 mins, then pull up the button "2"on the board, then siren alarm time will be 4mins when pull up all buttons "1, 2, 3, 4” , then siren alarm time will be 8 mins. Customers can adjust the alarm time according to their requirements.