Shijiazhuang Norman Pump Co.,Ltd

• MOQ 1 Set(s)

We are offering nzjq series submersible slurry pump is a kind of submersible slurry pump. the wear part of this series pumps are made of high wear abrasive chrome alloy.clean the slurry completely because of electric motor and pump submerged into water to work without suction head limit.nzjq submersible slurry pump is used for metallurgy, chemical, mine, coal, power, building, civil environment protection and river dredging for transferring sand and gravel.

• MOQ 1 Set(s)

We are offering slurry pumps. 1. General description nhm series slurry pump is mainly used for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industry. Transport the strong abrasive slurry with high concentration, ph 5-12, metal lined. 2. Introduction the frame plate liners for nhm series pumps have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. The frame plate liner and impeller for nhm pump are adoptable of hard metal only. Bearing assembly use cylindrical structure, which helps adjust the space between impeller and cover plate liner easily, and being removed completely when being repaired. Bearings use grease lubrication. The shaft seal could use the packing seal, centrifugal seal and mechanical seal. The discharge side can be positioned at intervals of 45degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good npsh and high efficiency, the pump of this type may be installed in multistage series to meet the delivery for long distance. 3. Model explanation nhm-4d n: our company(norman) h: high concentration m: metal lined 4: discharge size (inch) d: frame type with maximum power

• MOQ 1 Set(s)

We are offering horizontal slurry pumps. 1. General description nhr series slurry pump is mainly used for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industry. Transport the abrasive corrosive slurry with high concentration, ph 3-14, liner natrual rubber, polyurethane, neoprene or buna-n material. 2. Introduction the frame plate liners for nhr series pumps have replaceable wear-resistant rubber liners. The impellers are made of natural rubber liners. It has nearly the same constructure with nhm. Bearing assembly use cylindrical structure, which helps adjust the space between impeller and cover plate liner easily, and being removed completely when being repaired. Bearings use grease lubrication. The shaft seal could use the packing seal, centrifugal seal and mechanical seal. The discharge side can be positioned at intervals of 45degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good npsh and high efficiency, the pump of this type may be installed in multistage series to meet the delivery for long distance. 3. Model explanation nhr-6e n: our company(norman) h: high concentration r: rubber lined 6: discharge size (inch) e: frame type with maximum power.

• MOQ 1 Set(s)

We are offering nmm series pumps are cantilevered, horizontal, centrifugal, slurry pumps. Nmm series pumps are adopted high speed operating and so they have small volumes saving floor area. Clients from home and abroad are speak highly of its excellent performance, nmm series slurry pumps have become the first selection in metallurgical, mining, coal, power, building material and other industrial departments etc.

• MOQ 1 Set(s)

We are offering high pressure slurry pumps. The nlm(r) series centrifugal slurry pumps are cantilevered slurry pumps, horizontal, centrifugal slurry pumps. Nlm(r) series pump is light duty slurry pump, which features by higher rotate speed, smaller size and lighter weight compared to heavy duty slurry pump, they are suitable for delivering less abrasive, low dense slurry. The nlm(r) series centrifugal slurry pumps have a high rate of revolution and small volume saving floor area. Nlm(r) series slurry pumps have become the first selection in metallurgical, mining, coal, power, building material and other industrial departments.

• MOQ 1 Set(s)

We are offering sand pump. Ns(g) series sand(gravel) pumps are designed for continuously handling the most difficult higher abrasive slurries, which contain too big solids to be pumped by common pumps. Ns(g) series sand(gravel) pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging in dredger and course of rivers, and other fields.

• MOQ 1 Set(s)

We are offering heavy duty slurry pump. With the development of the technology, our company has introduced the series nzj(l) slurry pump under the theory of modern fluid mechanics, based on the software design and practical experiences. The nzj(l) new heavy series slurry pumps are designed as single-stage, single-suction centrifugal pumps. They are classified into the horizontal type (nzj type) and vertical type (nzjl type) according to construction. The pumps are innovative in both hydraulic and structural design. Clients from home and abroad are speak highly of its excellent performance.

• MOQ 1 Set(s)

We are offering verticle submersible pumps. Nvm(r) submersible(vertical) pumps are centrifugal, vertical slurry pumps submerged in sump during operation. They are designed for delivering highly abrasive, large particles and high density slurries. The sump pumps are suited for handling abrasive or corrosive, dense slurry with large particle size. Nvm series vertical pump is metal lined slurry pump, nvr series pump is rubber lined pump, they are mainly used to transport the slurry in pool. Because of the nvr pump are with rubber lined parts, it is suitable for handing strong corrosive slurry better than nvm pump.

• MOQ 1 Set(s)

We are offering small sand pump is one kind of horizontal centrifugal sand slurry pump, mainly used for small river, lake, pond, pool, etc. Sand suction or unloading sand from large dredger. According to customers’ requirements, it can be complete with diesel engine or electric engine to work.

• MOQ 1 Set(s)

We are offering water pump. The nis series single stage single suction pump are horizontal single-stage in-line centrifugal pumps which work smoothly with low vibration and noise. Due to their good structure designs, they can work for a long time without any problem. Furthermore they are assured of no water leakage.