Shijiazhuang Sunbo Pump Co., Ltd

Shijiazhuang, China

• Brand NameSunbo

HS (R)Series Introduction: HS(R) pump is horizontal centrifugal heavy duty slurry pump and it is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. It will maintain high efficiency over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduce maintenance and minimise downtime. The pumps of HS can be installed as multi-stage series. Features: 1.Replaceable wear-resistant metal or rubber liners and impellers, long service life time. 2. Easy to adjust the space between impeller and front liner and can be removed completely when maintaining. 3.Bearing assembly use grease lubrication. 4. Seal types: packing seal, expeller seal and mechanical seal. 5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications. 6. Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. 7. Wide application, good NPSH and high efficiency. The series pump can be installed in multistage to meet the delivery for long distance.

SM series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently. Features: 1. Open impeller design, ideally dealing high viscosity drilling slurries. 2. Combination seal for a long service life. 3. All pump models, use same frame support, convenient in maintainace and cut down costs. 4. The major parts are made from antiwear nodular iron, and long service life. Common Applications: Sand Slurry Charge Pump Blender Waterwell Drilling Puple and Paper Slag Food Processing Sweage Cooper, bauxite, and quarry slurries Zinc, Ore, coal tailings

SV series vertical centrifugal slurry pumps are designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement would not be effective. SPECIFICATION: D: 40-250 mm Q: 5-891 m³h H: 4-37 m FEATURES: SHAFT-- Different lengths of pump drive shafts are available to meet your working condition requests. LARGE PARTICLE IMPELLERS-- Large particle impellers are also available and enable passing unusually large solids. BEARING ASSEMBLY--Maintenance friendly Bearing Assembly has heavy duty roller bearings, robust bearing housings, and a massive shaft. CASING--The metal pumps have a heavy walled abrasive resistant chrome alloy. The rubber pumps have a molded rubber casing. COLUMN AND DISCHARGE PIPE-- The metal pump columns and discharge pipes are steel, and the rubber columns and discharge pipes are rubber covered. UPPER STRAINERS-- Snap in polyurethane strainers fit in column openings on the smaller sizes and steel strainers on the larger sizes. LOWER STRAINER-- Bolt on steel strainers on the metal pump and molded snap on polyurethane strainers on the rubber pumps.

We are offering sewage submersible pump anti-winding, no block. Automatic installation automatic control effective advantages: anti-winding, no blocking, automatic installation, automatic control, no vibration, the effective delivery of solid particles and long fibers. application: waste water drainage in factories and industries. Drainage system for municipal sewage plant waste water drainage in residential area. Flood system drainage waste water drainage in hospitals and hotels municipal facilities and construction area exploration and mining equipments pump for biomass pool and agriculture irrigation specification: capacity range: 8~4000 m3h head range: 7~60 m caliber range: 25~500mm power range: 0.75~250kw max medium temperature: 60 c material: cast iron, stainless steel 

Zgb(p) slurry pumps is horizontal cantilever single-stage, single-suction, double-case and high head of delivery centrifugal slurry pump. Series zgb(p) up-to-date generation slurry pump with large capacity, high head, multi-stages in series to remove ash & sludge and to deliver liquid-solids mixture. The series of pump has the advantages of reasonable construction, high efficiency, reliable operation and easy maintenance. Specification: * d(mm): 390--760 * q(ls): 1.0--533.3 * h(m): 3.1--94.2 * n(rmin): 740---1480 * n(%): 47.4--81.2 features: 1. Pump head-double-case pump is vertical split, the discharge can be installed at 8 different positions with an interval of 45 degree. 2. Wide passage, non-clogging and good performance of npsh; 3. Expeller seal combined with packing seal and mechanical seal have be adopted to guarantee the slurry from leakage; 4. The metric bearing with oil lubrication, reasonable lubrication and cooling systems ensure the bearing to be operated under the low temperature; 5. The materials of wet parts have the good performance of anti-wearing and anti-corrosion; 6. The pump can be used for seawater ash-removing to prevent it from the corrosion of seawater, salt and mist, and electrochemical corrosion; 7. The pump can be operated in series with multi-stage within permissible pressure. The permissible maximum working pressure is 3.6mpa.

• MOQ 1 Set(s)
• Packaging Typecustomization
• Brand NameSunbo
• Country of OriginChina

Hhs series pump is designed for the continuous pumping of highly abrasive, high density slurries with high pressure. It is also called high head slurry pump. The range is capable of handling heavy duty, medium size particles and pumping at heads in excess of 90 meters per stage. The small eye to impeller diameter ratio provides a combination that yields perfect wear performance. Features: -- high head, high pressure centrifugal end suction slurry pump, long service life. -- impeller and liners are made of high chrome alloy, anti-abrasive and wear-resistant. -- various types of pump seals to suit different working condition. -- discharge branch can be positioned at intervals of 45 degree -- can be installed in multi-stage. Specifications: -- size: 1"-6" -- capacity: 16-1008 m³h -- head: 25-94 m pump model selection of hhs pump when the type selection is conducted, the performance curve table for clear water of a pump shall be referred to, and the coefficient of range for the flow selected is as follows: -- for slurry of medium density and strong abrasiveness, the coefficient of flow range will be 40-80%; -- for slurry of low density and strong abrasiveness, the coefficient of flow range will be 40-100%; -- for the highest efficiency point under a certain rpm condition, its corresponding flow rate will be 100%.

We are offering horizontal slurry pumps. Sm series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently. Features: 1. Open impeller design, ideally dealing high viscosity drilling slurries. 2. Combination seal for a long service life. 3. All pump models, use same frame support, convenient in maintainace and cut down costs. 4. The major parts are made from antiwear nodular iron, and long service life. Common applications: sand slurry charge pump blender waterwell drilling puple and paper slag food processing sweage cooper, bauxite, and quarry slurries zinc, ore, coal tailings

Ssa series centrifugal sand pump is designed for continuous operation of heavy slurries that are abrasive, corrosive, or just plain tough to pump. Ssa series pump are more compact in design, and it can be adaptted for hydraulic motor drive. It is mainly used for oilfield frac trucks as well as blending and pump dealing for water well drilling solid control system applications. Features: 1. Open impeller, apply to transport high viscosity drilling liquid. 2. Combination seal for a long service life. 3. All pump models, use same frame support, convenient in maintainace and cut down costs. 4. The major parts are made from antiwear nodular iron, and long service life. Common applications: sand slurry charge pump blender waterwell drilling puple and paper slag food processing sweage cooper, bauxite, and quarry slurries zinc, ore, coal tailings