LINYI KEMELE CO.,LTD

LINYI, China

• MOQ 500 Kilogram
• Purity99.9
• ClassificationCONSTRUCTION AND FOOD
• Brand NameSIDLEY
• CAS No.9004-65-3
• ApplicationBuilding materials, coating industry,synthetic resin, ceramic industry, medicine, food, textile etc
• viscosity4000-200000
• Other NamesHPMC
• ash content3-5%
• Country of OriginCHINA

• MOQ 500 Kilogram
• CAS No.9004-32-4
• Brand NameSIDLEY
• ClassificationINDUSTRY
• Purity99.9
• ApplicationFOOD/OIL/DETERGENT/CONSTRUCTION/PAINTING ETC
• Other NamesCMC
• Number Of FlowerCarboxymethyl Cellulose
• Country of OriginCHINA
• AppearanceWHITE POWDER
• whitepowder

• MOQ 1 Metric Ton
• Cellulose etherwite powder

HydroxyEthy Cellulose (HEC for short) is a non-ionic soluble cellulose ether, both soluble in cold and hot water, with thickening, suspension, adhesion, emulsification, film-formation, water retention, protective colloids and other properties, widely used in coatings, cosmetics, oil drilling and other industries. Dissolve Hydroxyethy Cellulose in water Retarded Hydroxyethy Cellulose can be directly added into paint formulation, will form homogeneous, glazed solution. Period from powder wetted till dissolution completed call hydration time. During this process, solution build up thickening ability. Temperature and PH has effect on hydration time. Increase PH to 8.0-10.0, will shorten the time 40-60%; temperature increase will shorten this time as well. Normally, we suggest to add Hydroxyethy Cellulose at room temperature and neutural situation, hydration time is around 25 minutes. Application Guide for Paint Industry High Thickening Effects SidleyCel Hydroxyethy Cellulose provides the latex paints especially high PVA paints with excellent coating performance. When the paint is thick paste, no flocculation will occur. SidleyCel Hydroxyethy Cellulose has higher thickening effects, so can reduce the dosage, improve the cost-effectiveness of formulation, and enhance the washing resistance of paints. Excellent Rheological Properties The aqueous solution of SidleyCel Hydroxyethy Cellulose is a non-Newtonian system, and the properties of the solution are called thixotropy. In the stationary state, after the product is completely dissolved, the coating system can maintain

• MOQ 1 Metric Ton
• Purity99%
• CAS No.9004-36-8
• ClassificationPharmaceutical grade
• Brand NameSIDLEY
• Number Of FlowerMCC
• Model Number101/ 102
• Cellulose etherwhite powder
• Country of OriginChina
• Other NamesMicrocrystalline Cellulose

• MOQ 1 Metric Ton
• Apparent viscosity≤40cP, ≥50cP
• Moisture, %≤10
• API Filtrate Volume≤16mML, ≤23ML
• Presence of starch deterivativesabsent

Polyanionic Cellulose short for PAC, It is a high quality water soluble cellulose derivative. In shape of white or light yellow free-flowing powder, it is odorless, tasteless, non-toxic & non-fermented, and has good thermal-stability and high salt resistance. Polyanionic Cellulose is soluble into water to form thick liquid, and it widely used in water-base drilling fluid so as to enhance the drilling fluid viscosity and control the fluid loss. Usually the sodium salt of Polyanionic Cellulose is in application and widely used in petroleum drilling, especially in salt well and offshore oil drilling. Polyanionic Cellulose used in the fracturing fluid, Polyanionic Cellulose can efficiently carry ‘the filler’ into the cracks of well, establish the permeability pathway, which can effectively control the fluid into the well structure, reduce the fluid loss, and reduce the pressure drop. Ultra-high viscosity products can replace guar gum, reducing production costs. Polyanionic Cellulose Low Viscosity Applications Polyanionic Cellulose widely used in water-base drilling fluid for a variety of applications, such as filtration control, viscosity and shale inhibition. Method of Addition The common dosage is usually 0.2-0.6 %. Advantages Compatible with most chemicals used in drilling fluids. Environmentally safe. Package and storage The product is usually kept in multi-wall bags with polythene layer inner, and the net weight of each bag is 25 kg. Special packages are available based on customers’ requirements. The product must be kept in shady, dry and ventilated warehouse. It should be prevented from sun and rain, and positioned in some place away from heat and fire. The expiration period is

Redispersible emulsion powder(ordinary type) is composed of a special emulsion(polymers) made of powder adhesive after spray drying. This powder is contact with water can be dispersed again in soon after forming emulsion, and with the nature of the same as the initial emulsion, namely the film can be formed after the moisture evaporation, the film has high flexibility, high resistance to weathering and on various substrate with high caking property. The powder environmental protection, energy saving, high quality, used for powder materials, dry-mix mortar is an indispensable functional additives. It can improve the performance of mortar, raise the strength of the mortar, improve the bonding strength of mortar with different base material, improve the mortar flexible and variable line, compressive strength, flexural strength, abrasion resistance and toughness, stick relay and water retention, constructability. Redispersible emulsion powder is mainly used in all kinds of dry-mix mortar, such as wall putty powder, ceramic tile adhesive, ceramic tile jointing agent, dry powder interface agent, exterior insulation mortar, self-leveling mortar, mending mortar, decorative mortar, waterproof mortar, etc. Feature: redispersible emulsion powder(redispersible latex powder) is the main raw material in production of internal, external wall putty, adhesive mortar and plaster mortar. The powder is specially applied as the agglutinant of basis materials on triple superphosphate, talcum powder and white cement and so on. It can improve the adhesion properties water resistance, flexural strength and operability of the basis materials. Usage: the quantity of the powder is to different kinds of basis material. The substrate mixture should be stirred and dispersed fully to ensure the excellent stability of the products. However, high temperature generated from high-pressure and shear stress when mixed should be avoided.

• MOQ 1 Metric Ton
• Viscosity (mPa.s) (5% solu., 20℃)4, 5, 7, 10, 20, 50, 70, 100, 150, 200, 300

Ethyl Cellulose did not dissolve in water, but soluble in many organic solvents were used as tablets, granules of the adhesive, can increase the hardness of tablets to reduce friability tablets, it can be used as film-forming agent to improve the appearance of tablets, isolated taste, to avoid the failure of water-sensitive drugs to prevent the influx of metamorphic change agents, promoting the safe storage of tablets, but also can be used as reinforcing material for Sustained Release Tablets. Technical specification Comply with USP, EP and CP. Item K grade N grade Ethoxy (WT%) 45.5-46.8 47.5-49.5 Viscosity (mPa.s) (5% solu., 20�) 4, 5, 7, 10, 20, 50, 70, 100, 150, 200, 300 Loss on drying (%) �3.0 Residue on ignition (%) �0.4 Chloride (%)