Sip Industry Co.,Ltd

we are offering fin die spare parts. the punching and flanging punch-die and perforation punch may amount to a precision of 0.003mm, a roundness and coaxiality of 0.002mm, and a bending strength of 4400mpa. the material hap40 is uniform in itself. further subject to special heat treatment process, it will give the die significantly extended service life, about 20 million shots, more than that of like products made in japan. louver and bridge pieces for air conditioner fin dies 1.material:skh 51, hardness: hrc61-64 2.material:cpm10v, hardness: hrc62-64 3.material:hap40, hardness: hrc64-67 the unilateral fit clerance of the louver punching die and bridge piece punch die is 0.008-0.01mm piercing punch and piercing die 1, material:skh 51, hardness: hrc61-64 2.material:carbide，hardness:hrc67~ 3.material:hap 40，hardness:64-67 hrc up to precision 0.003mm, with roundess and concentricity ￠ 0.002mm, unilateral fit clerance 0.005mm piercing and hole-flanged punch die 1.material:skh51 hardness:61-64hrc 2.material:skh40 hardness:64-67hrc piercing and hole-flanged punch die, with accuracy up to 0.003 mm and roundness and coaxial tolerance for 0.002 mm packing punch die and bushing 1.material:skd11 hardness:58-61 hrc 2.material:skh51 hardness:61-64 rc 3.material:cpm10v hardness:62-64hrc 4.material:hap40 hardness:64-67 hrc customized oem fin de cutter parts 1.material:cpm10v hardness:62-64hrc 2.material:hap40 hardness:64-67 hrc the unilateral fit clerance of the punch die is 0.008-0.01mm.

• MOQ 1 Piece(s)
• Brand Namesip
• Shaping Modecustomized
• Nameejector pin

• MOQ 1 Piece(s)
• Product Nameguide bushes

guide bushing .

• MOQ 1 Piece(s)

piercing punches.perforating pin, by tungsten carbide, or hss material, with TICN, TIN, tialn COATING

• MOQ 1 Piece(s)

We are offering progressive die parts.

• MOQ 1 Piece(s)

We offer special molld components. Special molld components

• MOQ 1 Piece(s)
• Raw MaterialSKD11
• Machine TypePRECISION
• Brand NameSIP
• Place of OriginCHINA
• AutomationMACHINING
• After-Sales Service ProvidedYES

mandrel for expander vertical tool, by skd11 material.can process according to supplied special drawings, oak type is available. .

• MOQ 1 Piece(s)
• Brand Namesip
• Raw Materialskd11,steel as required
• After-sales Service Providedyes
• Automationno
• Number Of Flowertube bend

• MaterialSKH51 SKD11
• Brand NameSIP
• CertificationYES
• Maximum Working Pressure11111
• ApplicationAC,Fin die,heat exchanger
• Number Of FlowerSIP

heat exchange cooling fin die spare parts including the piercing punch and die insert, cutters and louvers. for AC COOLING FIN DIE

fin exchange heat die parts cutter base, cutter and blade, flate socket and mandrels

• MOQ 1 Set(s)

sip can        can produce the whole set of fin die according to your request.    

• MOQ 1 Piece(s)

die, die components, tool die parts for mold and die usage

• MOQ 1 Piece(s)
• Operating Temperature100
• Rated Power120
• Brand Namesip
• Current20
• Thickness0.02
• Country of Origin110
• Number Of Flowerpin

semiconductor pin Semicon pin Smalle diamter into 0.4mm Products include straight e-pin, step e-pin, location pins, Diamond Locating Pin , etc. Make character engraving on the tip side as required. With Harc chrome coating treatment.

We are main supplier of this product.

precision machining components

• MOQ 1 Piece(s)
• Materialskd11
• Brand Namesip
• Standardcustomized
• ApplicationCutting
• Number Of Flowercustomized
• Shaping Modefabrication

cutter louver for bend tube machine spare parts and AC fin press machine

• MOQ 1 Piece(s)

CENTER PINS

• MOQ 1 Piece(s)

We are main supplier of this product.

• MOQ 1 Piece(s)
• Brand Namesip
• Applicationmold fitting
• Shaping Modecustomized

special mold spare parts SIP produces various of special mould spare parts, like punches, dies, pilot punches, guide sleeves, center pins, perforating pins, core pins, extrusion pins, stripper bushes, button dies, piercing punches, perforating punches, straight and step punches, square punches, hex size punches....   All mould components according to supplied special prints and drawings, or designs.   Just contact to send your detail designs and will do every efforts to satisfy you    

we are offering cooling fin spare parts. cooling fin spare parts including mandrils, cutter, for cooling copper tube.

we are offering special mold parts. hss material make as supplied special drawings.

• MOQ 1 Piece(s)
• materialD2

We are offering mandrills for bend machines products guide pins, guide bushings, ejector pins, piercing punches, ejector sleeves, die inserts, carbide pins, sprue bushing, locking blocks, die casting part, mould components, precision mould parts, standard and customized punches, precision die components, die core, die inserts applied in automobile die, precision plastic mould, punch die, air conditioning fin die, semi-conductencapsulation mould processing materials copper, high speed steel, carbon steel, alloy etc. Processing standards misumi, punch, dem, hasco, sankyo, dayton processed and testing equipments center-less grinder, surface grinder, internal grinder, cylindrical grinder, inner-aperture grinder, quadratic element, sodick edm, mitsubishi mirror spark machines, cnc grinding machine, cnc milling machine, polishing machine, engine lathe, projector (imported from japan), wire edm machine specialized in processing precision parts according to customer�s drawings contact by drawing with following information 1. Plus or minus tolerances. 2. Type of material and hardness needed. 3. Part application. 4. Target price if you have one.

• MOQ 1 Piece(s)

We offer mandrels for bend machines. Mandrels for bend machines

• MOQ 1 Piece(s)

ejector sleeve

• MOQ 1 Piece(s)

sprue bushes

• MOQ 1 Piece(s)

We are offering Special Mold Parts.

• MOQ 1 Piece(s)

We are offering tool die components.

• MOQ 1 Piece(s)

center pins

• MOQ 1 Piece(s)

We are offering cooling fan spare parts.

• MOQ 1 Piece(s)

We are offering cooler parts.

• MOQ 1 Piece(s)

We are offering fin die parts.

• MOQ 1 Piece(s)

We offer blades for fin in ac. Blades for fin in ac

• MOQ 1 Piece(s)

We offer lourver for fin in ac. Lourver for fin in ac