Suncoo Petroleum Technology Co.,Ltd

China, China

We are offering slickwater instant continuous fracturing fluid. With the development of the shale gas fracturing market, and increasing demand for oil in china and abroad, price hiked in guar gum , and demand augmented for high-performance fracturing fluid. a lot of new materials come out to replace the traditional guar gum based fracturing fluid system, such as clear fracturing fluids, polymer fracturing fluid, low molecular weight polymer fracturing technology. But traditional habits and inner weak points of those new technologies hold back the widespread application. compared with other fracturing fluid systems, slickwater has following advantages 1) minimize the equipment involvement. No need to prepare the fluid in blending tower, or site preparation pool, it can be added into fracturing fluid directly, which can carry the sand instantly. It can simplify the operation procedure without reducing the stability of sand-carrying capacity. Reduce the labor and equipment cost, easy to use, shorten working hours, increase efficiency, especially valuable for the operation with demand for tens of thousands cubic meters sands, it can save considerable operation cost, and increase the stimulation efficiency. 2) cost-saving and eco-friendly. The slickwater can be added on-demand-on-site, without pre-blending, avoiding waste of unnecessary blending, consequently save the cost and reduce the detriment to the environment. 3) high sand-carrying ratio. Dissolved in water, the slickwater solution can generate high viscosity by itself. This will facilitate carrying sand. Tested in lab, the sand-carrying ratio can reach maximum 200%. 4) oil reservoir protection. Slickwater is soluble in water, residue-free, so reduces damage to reservoir. The fluid cleanup is not necessary during stimulation for water wells. 5) speedy cleanup. By using gel breaker, the polymer molecule can be degraded into smaller one, or even into aqueous humor, or lower viscosity, to realize the speedy cleanup. 6) better rheology. Slickwater has better rheology, making less friction for protecting oil reservoir. 7) better stimulation. 8) wide application range. It can be used during fracturing of oil wells, water wells, and gas well; can be also used during fracturing of shale gas and coal-bed methane. Slickwater is compatible with all kinds of proppant, such as quartz sand, ceramic sand and resin coated sand.

• MOQ 1 Ton
• oilfield chemicalheavy oil

We are offering drive crude extraction agent. As drives crude extraction agent(hereinafter referred to as crude extraction agent) is a fluorinated polyester compound(shifting technology includes bola surfactant, silicone surfactants, etc) of new surfactant mixtures. Not only it has the advantage of "3 high and 2 resistance" features, but also it could reduce the cost resulting from reducing surface dosage of fluorine surfactant due to compound with other surfactant. And it could achieve the effect that single fluorine surfactant could’t achieve. It could be widely used in all kinds of oil-water well modification technologies, especially applied in fields difficult to use, such as the thick oil and low permeability, drive○s technology have good prospects. And it could solve the problems with oilfield itself much gum, wax and bitumen resulted in fouling, and output decrease, frequently operation and low speed of oil production casued by deposit in the near wellbore area. technology requirements item drive crude extraction agent(low concentration) appearance uniform red oily liquid ph value 6～7 density（g/cm3） 0.90～1.10 surface tension，mn/m ≤35 freezing point（℃） ≤-5℃ flashing point（℃，close cup） ≥60℃ features  "3 high and 2 resistance" features: high surface activity, low surface tension, high thermal stability, 300 ℃ heat stability, high chemical stability. Acid, alkali and salinity won’t affect it. In water solution, drive crude extraction agent has hydrophilic groups and hydrophobic groups at the same time. In oil and other organic liquid, drive crude extraction agent has oil-wet and oleophobic property.  capture crude and fouling automatically "smartly" in the oil reservoir.  macromolecular oil is extracted to small oil droplets, pour point, reduce viscosity and remove blocking, open up a new oil flow channel.  reduce the surface tension, expand capillary diameter, reduce capillary resistance, wash oil well, improve the capacity of dialysis, the sweep efficiency is high. applications  throughput and blocking removal;  oil displacement;  water well reducing pressure and increasing injection;  application of oil formation improvement fluid;  pipeline cleaning and drag reduction, daily maintenance. Use concentration: 10-20% packaging & storage& price  package : blue iron barrels,  net weight 100 kg or 125 kg;  store in dry and ventilated place.

• MOQ 1 Ton
• oilfield chemicalheavy oil

We are offering drive crude extraction agent (high concentration). As drive crude extraction agent is mainly for fluorinated polyester compounds of new surfactant mixtures .it could solve the problems with oilfield itself much gum, wax and bitumen caused by fouling, or thick oil couldn’t be exploited normally to result in output decrease, frequently operation and low speed of oil production. Drive molecules could capture the crude and fouling in the oil reservoir “smartly”, spall and separate, quickly extract and clear off from core. Oil extracted by drive, could divide "macromolecules thick oil regiment into small molecules ", open up a new oil flow channel. Viscosity broke and dissolved soft oil, was carried out from the well hole, will produce efficiency increase results.it could be widely used in all kinds of oil-water well modification technologies, especially applied in fields difficult to use, such as the thick oil and low permeability, mainly used in steam thermal stimulation and recovery factor improvement. The economic benefits is above 1:10 with good promotional value. technology requirements item drive crude extraction agent(high concentration) appearance uniform red oily liquid ph value 6～7 density（g/cm3） 0.90～1.10 surface tension，mn/m ≤35 freezing point（℃） ≤-5℃ flashing point（℃，close cup） ≥60℃ features  "3 high and 2 resistance" features: high surface activity, low surface tension, high thermal stability, 300 ℃ heat stability, high chemical stability.acid, alkali and salinity won’t affect it. In water solution, drive crude extraction agent has hydrophilic groups and hydrophobic groups at the same time. In oil and other organic liquid, drive crude extraction agent has oil-wet and oleophobic property.  capture crude and fouling automatically "smartly" in the oil reservoir.  macromolecular oil is extracted to small oil droplets, pour point, reduce viscosity and remove blocking, open up a new oil flow channel.  reduce the surface tension, expand capillary diameter, reduce capillary resistance, wash oil well, improve the capacity of dialysis, the sweep efficiency is high. applications  could be used in the steam thermal recovery technology, concentration is 0.05-0.5%. packaging & storage& price  package : blue iron barrels;  net weight 100 kg or 125 kg;  store in dry and ventilated place.

• MOQ 1 Ton
• oilfield chemicalfoaming agent

Reach foaming agent is a chemical product, which is composed of many kinds of surface active agent s. It can be divided into three types, reach - 100 medium and low temperature foaming agent, reach - 200 high temperature foaming agent, reach - 300 foaming agent for acidization.these foaming ageng are mainly used in foaming displacement of reservoir oil in the tertiary oil recovery ;meanwhile, foam acidizing, foam drilling, foam well wahing, water plugging profile control , foam drainage and gas recovery, all are included. good foam will be formed when combined with air, nitrogen, carbon dioxide: good foaming ability, good compound with hard water which has high salinity and high calcium and magnesium content, good foam stability, good compatibility with other chemical additives . technology requirements item reach-100 foaming agent reach-200 foaming agent reach-300 foaming agent appearance colorless to pale yellow liquid colorless clear liquid colorless or pale yellow liquid density（20℃），g/cm3 1.01-1.05 1.01-1.05 0.95-1.05 ph value 6.0-8.0 6.0-8.0 6.0-8.0 water solubility 100% 100% 100% foaming volume（ross），ml ≥400 ≥350 ≥300 surface tension，mn/m ≤28 ≤28 ≤28 suitable temperature，℃ ＜150 ≤350 resistance factors ＞20 ＞20 ＞20 foam half-life period，min ＞120 ＞120 ≥100 oil displacement efficiency，% ＞70 ＞70 features  the foaming agent has good foaming properties under the condition of the high temperature and high salinity (unrestricted).  good foam stability, long drainage half-life and foam half-life period, drainage half-life about 5 min, foam half-life more than 200 min, performance is superior to similar roducts. .  it has excellent compatibility and good corrosion ability, totally a safe, environmentally friendly products.  the ability of foam blocking core is very strong, plugging rate is 100%.  certain oil resistance, small sandstone adsorption loss ;and the higher the temperature reach, the smaller the adsorption loss lose.  oil viscosity reduced, diluted oil wall formed , sweep efficiency and recovery efficiency improved. applications reach 100 foaming agent: generally used as concentration of 0.5% to 1%; reach 200 foaming agent: generally used as the concentration of 0.3% to 0.5%, injected with the high temperature steam in the wellhead. reach 300 foaming agent: generally used as concentration of 0.3 to 0.5%. packaging & storage  package:blue plastic barrels,  net weight 100 kg or 125 kg;  store in dry and ventilated place.

• MOQ 1 Ton

Run active anti-swelling agent is a new technology product first produced in the world by suncoo petrolume technology co., ltd . Its main ingredient is active inorganic semiconductor superfine grain;it can be widely applied to reservoirs with mudstone repair process and recovery efficiency improvement process. Compared with other anti-swelling agent, it consider about water damage problem especially for reservoir with mudstone and low permeability reservoirs .therefore, the product with active material added can eliminate water damage effectively ; it is a new multi-functional reservoir minerals processing products, developped from brand new visual angle. technology requirements item run-1 active anti-swelling agent run-2 active anti-swelling agent appearance light yellow solid yellow liquid surface tensio mn/m ≤3 5 ≤35 interfacial tension mn/m ≤1 ≤1 anti-swelling rate % ≥60 ≥60 shrinkage expansion depressurization rate % ≥10 ≥10 permeability recovery value （70℃） % ≥60 ≥60 features  the anti-swelling function for channel of swelling clay mineral is double , wash oil function included;  formation wetted and cleaned, water lock damage eliminated, injection pressure reduced , oil well penetration improved.  the clay suspension particle size become smaller.  good compatibility with formation water, fresh water  good compatibility with acidizing liquid , fracturing fluid, surfactant and inorganic salt ;it can be used as preflush of acidification and fracturing process, which produces good synergistic effect. applications products can be widely used in sensitive reservoir repair processing. Wells acidification, blocking removal, sand control , fracturing , oil well washing, all can be applied to. Usage is 0.5% - 3%; recommended usage is 2.5% to 3%. Solid run - 1 is used in acidization and blocking removal; liquid run - 2 is used in fracturing preflush. packaging & storage  package: kraft bag with inner lining(solid run-1)  net weight :25 kg;  package:blue plastic barrels, (fluid, run-2)  net weight 100 kg or 125 kg;  store in dry and ventilated place.

• MOQ 1 Ton
• oilfield chemicalanti-water

C8 anti water hazard agent is consist of many kinds of refined surfactant, wetting agent and mutual solvent agent, mainly to solve the problems of high shale content, loose oil layer structure, poor cement performance, low permeability water sensitivity and water lock, great changes of crude physical property and low production caused by operation pollution in the oilfield exploitation.besides, c8 anti water hazards agent could reduce crude viscosity and wash oil in the oil reservoir. It could be used quickly and efficiently to produce the effect of eliminating oil-water well pollution caused by water lock, improving oil reservoir, increasing permeability, and increasing oil production capacity or restoring water injection efficiency. technology requirements item anti water hazard agent appearance colorless uniform liquid density, g/cm3 1.0-1.15 ph value 6.0～8.0 surface tension，mn/m ≤35 interfacial tension，mn/m 10-1-10-2 wash oil rate，% ≥90 permeability ratio ≥1 fouling blocking removal ratio，% ≥90 features conventional anti water hazard agent is fluorine surfactant with single function. Its concentration is low, and could eliminate all kinds of water hazards and oil fouling pollution, to protect oil reservoir, and increase production capacity and efficiency. applications c8 anti water hazard agent could eliminate possible unqualified well fluid, polymer residue and crude deposit. It could reduce viscosity and remove blocking. The concentration is usually 0.5-2%. packaging & storage& price  package : blue plastic barrels；  net weight 100 kg or 125 kg;  store in dry and ventilated place.