Tid Technology Development Co. ltd

weinan, shaanxi, China

• Place of Originchina

High mechanical strength; good performance of hydrophobicity and anti-pollution; excellent electrical performance; small volume and light weight.

• Place of Originchina

1.applied standard:iec61109, gb19519-2004, jbt8460-1996 ； 2.voltage range:10kv-500kv； 3.tensile load range:50kn-430kn； 4.coating material: polytetrafluoroethylene ,  silicon rubber,  insulating paint 5.fitting type: ball , socket , tongue , clevis,  eye type , y type and screw.

• Place of Originchina

High mechanical strength; good performance of hydrophobicity and anti-pollution; excellent electrical performance; small volume and light weight.

• Place of Originchina

High mechanical strength; good performance of hydrophobicity and anti-pollution; excellent electrical performance; small volume and light weight.

• Place of Originchina

1.applied standard:iec61109, gb19519-2004, jbt8460-1996 ； 2.voltage range:10kv-500kv； 3.tensile load range:50kn-430kn； 4.coating material: polytetrafluoroethylene ,  silicon rubber,  insulating paint 5.fitting type: ball , socket , tongue , clevis,  eye type , y type and screw.

• Country of Originchina

The function of insulation rod(gis- switch rod) are insulate the electrical potential and carry out the command to switch on and switch off from the substation control room by using the insulation tension rod open and close the dynamic and static contact.so that the insulation tension rod are required not only a high insulation character , but also the mechanical and operation ageing performance. There is a very high requirement of punch or flashover along with the surface.it can not be allowed to occur the burn or deformation on the pole

The product is applicable for the electrified railway in complex environment, which can effectively prevent pollution flashover and reduce cleaning and maintenance .the composite cross arm insulator feature is small , so that it can not be replaced by porcelain or class insulator in the small space place.

Product normal temperature: -40℃~+40℃;  altitude :≤1000m. Max. wind speed :≤ 35ms.  earthquake intensity: ≤ 8 degree.

Surge arrester can be divided into many types according to its application as below: distribution type, power station type, protecting capacitor type, transformer neutral point type , protecting motor type, electrified railway type, line type.etc. Line type surge arrester can be divided into series spacing type and without spacing type and in series spacing type can be divided into supporting spacing and sure air spacing type.

The product is applicable for the electrified railway in complex environment, which can effectively prevent pollution flashover and reduce cleaning and maintenance .the composite cross arm insulator feature is small , so that it can not be replaced by porcelain or class insulator in the small space place.

 product normal using conditions 1 product normal temperature: -40℃~+40℃;  altitude :≤1000m. Max. wind speed :≤ 35ms.