WJF Chemicals Co. Ltd., Quzhou

Quzhou, China

• MOQ 1 Piece(s)
• Plastic typePolyimide
• Country of OriginChina

We can supply polyimide parts&shapes made from unfilled polyimide resin powder with excellent physical properties, or filled with graphite, glass fiber, PTFE, MoS2, etc., widely used from automotive industry and aerospace to industrial applications and office machines. Characters: * Supplied in different machined parts &shapes: rods, sheets, rings, seals, bushings, rollers, bearings, Washers, pad,    etc. * Low wear and friction * Excellent heat resistance. * Excellent dielectric performance. * Excellent chemical resistance. *Higher mechanical strength, better tear resistance. *Machinable with standard tools More details, samples and customization also available

• MOQ 1 Kilogram

We can supply bismaleimide and n, n'-1, 3-phenylene bismaleimide, widely used as matrix resin for insulating materials, advanced composite materials, prepreg, in engineering plastics and rubber industry, etc. 1. Bismaleimide(bmi) cas:13676-54-5 synonym:n, n'-4, 4'-diphenylmethane bismaleimide, 1, 1'-(methylenedi-4, 1-phenylene) bismaleimide solubility:soluble in dmf, etc.insoluble in water. Clear transparent solution in hot toluene visual:light yellow powder;assay:min. 99%;mp:152c--156c 2. n, n'-1, 3-phenylene bismaleimide (pdmhva-2) cas#:3006-93-7 synonymom:n, n'-m-phenylene dimaleimide solubility: soluble in thf, hot acetone, insoluble in water. Visual:light yellow powder assay:min.99%, mp:198c-201c

• MOQ 1 Kilogram
• Packaging Typedrum
• Extraction Typecontact us
• Country of OriginChina

We can supply: 1 .hesperidin (cas:520-26-3)extracted from citrus aurantium(bitter orange)with assay(hplc)93%-98%, widely used in healthcare, pharmaceutics . 2. synephrine (cas:94-07-5)extracted from citrus aurantium (bitter orange)with assay (hplc)4%-98%, widely used in healthcare, pharmaceutics. 3. synephrine hcl (cas:5985-28-4) with purity over 98%, widely used in healthcare, pharmaceutics 4. citrus bioflavonoids extracted from citrus aurantium (bitter orange) with purity:10%-90%, widely used in healthcare and pharmaceutics. More details, samples and customization also available

We could supply below polyimide resins: 1. PIR-001 Visual: Fine yellow powder Particle size:30-40um Gravity:1.3gcm3 Softening temp.:110-130℃ Hardening temp.:230℃ Application: used as solid lubricants in grinding wheels of diamond, CNB, etc. 2. PIR-002 Visual: Fine yellow powder Gravity:1.34gcm3 Tensile strength(23°C):85Mpa;Flexural strength(23°C):95Mpa; Friction coefficient:0.25-0.30 Application: matrix resin for shapes, components, parts with excellent physical properties. 3.PIR-003 Visual: Fine yellow powder Gravity:1.3gcm3 Heat decomposition:430℃ Gelling ing time:200--500s170℃ Solubility:soluble in DMF, etc. Application:matrix resin for reinforcement prepreg of fibers(cabon, glass, etc.), mixture with epoxy for heat resistance, etc. (Before use, dissolve in DMF, etc.for a certain solid content solution) More details, samples and customization also available.

• MOQ 1 Kilogram

We could supply insulating laminates: dmd, nmn, nhn, fish paperpolyester film, widely used in motor, transformer and other electrical machines. 1. Dmd-- a family of 3- ply laminates of non-woven polyester fiber mat bonded to both sides of polyester film with good mechanical strength, dielectric property and reliable heat adhesivity, cost-effectiveness, and a perfect insulating material for electrical machines in slot, phase, liner. Class-b, class-f and stage-b, stage-c dmd available 2.nmn-a family of 3-ply laminates of aramid paper bonded to both sides of polyester film with not only excellent dielectric and mechanical strength of film’s, but better tear resistance and excellent absorption to varnish of paper’s, and a reliable class-f insulation material for electrical machines. 3.nhn--a family of 3-ply laminates of aramid paper bonded to both sides of polyimide film with not only excellent dielectric and mechanical strength of film’s, but better tear resistance and excellent absorption to varnish of paper’s, and a reliable class-h insulation material for electrical machines. More details, samples and customization also available

• MOQ 1 Kilogram
• Plastic TypePOLYIMIDE
• Country of OriginChina

We can supply follows: 1.Aramid paper with thickness:2mil, 3mil.5mil, 7mil, etc., width:8mm--1000mm, widely used in electrical equipments. 2.Aramid paper adhesive tape, made of aramid paper coated by silicone or acrylic adhesive on one side, with total thickness:0.08mm--0.13mm, width:6mm--520mm, length:50m, widely used in electrical and electronic industry. More details, samples and customization also available

We can supply coverlay pi made of polyimide film coated by modified stage-b acrylic adhesive or epoxy resin on one side with protection release film, widely used in protection of fcp characters: excellent dielectric performance, high bondability and good dimension stability; low fluidity and good processability; supplied with different sizes and colours(yellow, black) thickness:0.0375mm--0.20mm, standard supply width: 500mm, length:100mroll packing:carton after sealed by plastic film bag shelf life:12months typical datas: peel strength:1.05nmm adhesive flow max.(overflow):4.3:1(mil:mil) chemical resistance:80% .

We could supply aloe vera powder: 1.100x, 200x aloe vera gel dried powder, widely used in pharmaceutics, healthcare, cosmetics and food; 2. Aloin over 18%, widely used in pharmaceutics and healthcare; more details, samples and customization also available

we could supply l-theanine, dl-theanine with purity:min.99%, widely used in food, beverage and non-food industry. product name: l-theanine synonym: l-glutamic acid -r-monoethylamide, n-ethylglutamine cas#: 3081-61-6 chemical formula: c7h14n2o3 visual:white crystal powder assay:min.99% specific rotation [α]20d:+7.5-+8.5º melting point:210-215℃ more details, samples and customization also available